How many milligrams are in 6.38 x 10⁻² pounds? 454 g = 1 lb

The molecule that is being released by cellular respiration and used in photosynthesis is carbon dioxide (CO₂).

The molecule that is being released by cellular respiration and used in photosynthesis is carbon dioxide (CO₂).Explanation:In the process of photosynthesis, plants take in carbon dioxide (CO₂) from the atmosphere and use it to produce glucose (C₂H₁₂O₆) and oxygen (O₂). The oxygen produced is released into the atmosphere.In contrast, during cellular respiration, glucose is broken down in the presence of oxygen (O₂) to produce energy (ATP) and carbon dioxide (CO₂) as a waste product. The carbon dioxide produced is released into the atmosphere.It's essential to note that the processes of photosynthesis and cellular respiration are interdependent. The oxygen produced during photosynthesis is utilized in cellular respiration to produce energy, and the carbon dioxide produced in cellular respiration is utilized during photosynthesis to produce glucose.As a result, the release of carbon dioxide by cellular respiration provides the carbon source for photosynthesis.

for such more questions on molecule

https://brainly.com/question/24191825

#SPJ8

There would be an excees of  20.48 g of sulfur left.

We would have to apply stoichiometry so as to solve the problem

We have that;

Number of moles of S = 50 g/32 g/mol

= 1.56 moles

Number of moles of F2 = 105 g/ 38 g/mol = 2.76 moles

Given that;

1 mole of S reacts with 3 moles of F2

1.56 moles of S reacts with 1.56 * 3/1

= 4.68 moles

F2 is the limiting reactant

Amount of sulfur reacted = 1/3 * 2.79

= 0.92

Excess sulfur = 1.56 moles - 0.92 = 0.64 moles

Mass of excess sulfur = 0.64 * 32 g/mol

= 20.48 g

Learn more about stoichiometry:https://brainly.com/question/28780091

#SPJ4

Sulfur and fluorine react in a combination reaction to produce sulfur hexafluoride: S(g) + 3F2(g) ->SF6(g) If 50 g S is allowed to react as completely as possible with 105.0g F2(g), what mass of the excess reactant is left.

The small engine, rated at 4.0 horsepower, can produce approximately 2.98 × 10⁶ joules (J) of mechanical energy in 50 seconds in 1.5 × 10⁵ J. Option B is correct answer.

To calculate the mechanical energy produced by the engine in 50 seconds, we need to convert the horsepower rating to watts and then multiply it by the time.

Given that 1 horsepower is equal to 746 watts, the engine's power output is 4.0 horsepower × 746 watts/horsepower = 2984 watts.

Now, we can calculate the mechanical energy using the formula:

[tex]energy = power * time.[/tex]

Plugging in the values, we have: energy = 2984 watts × 50 seconds = 149,200 J.

Therefore, the small engine can produce approximately 149,200 joules (J) of mechanical energy in 50 seconds.

Among the given answer choices, the closest value is "1.5 × 10⁵ J," which represents 150,000 J. This is the most appropriate approximation for the amount of mechanical energy produced by the engine in 50 seconds.

Learn more about energy here

https://brainly.com/question/6955334

#SPJ11

The number of atoms in the sample of aluminum = 7.04×10²⁵. In order to calculate the number of grams of the aluminum, we must use the following steps:

Step 1: Calculate the molar mass of aluminum.

Step 2: Calculate the number of moles of aluminum in the given sample.

Step 3: Calculate the mass of aluminum in grams using the number of moles obtained in step 2.  

Step 1: Calculation of Molar Mass of Aluminum: The molar mass of aluminum can be found on the periodic table.

Aluminum's atomic mass is 26.98 g/mol. Molar mass = 26.98 g/mol.

Step 2: Calculation of number of moles of Aluminum in the sample The number of atoms of aluminum in the sample = 7.04×10²⁵. Number of moles of aluminum = number of atoms/ Avogadro's number 1 mole = 6.02×10²³ atoms of aluminum Therefore, the number of moles of aluminum in the sample can be calculated as follows:Number of moles of Aluminum = 7.04×10²⁵ atoms / 6.02×10²³ atoms/mole Number of moles of Aluminum = 117 moles

Step 3: Calculation of Mass of Aluminum in Grams: Now that we know the number of moles of aluminum, we can calculate the mass of aluminum using the following formula: Mass of Aluminum = Number of moles of Aluminum × Molar mass of Aluminum Mass of Aluminum = 117 moles × 26.98 g/mol Mass of Aluminum = 3,159.66 g Therefore, the given sample of aluminum weighs 3,159.66 grams. The answer is 160 words long.

To Learn more about Aluminum. Click this!

brainly.com/question/30221183

#SPJ11

In the given reaction vessel, there are 0.089 mol of CO and 0.125 mol of O₂ based on the given masses. The maximum number of moles of CO₂ that can be recovered is equal to the number of moles of CO, which is 0.089 mol.

To calculate the number of moles of a substance, we divide the given mass of the substance by its molar mass. The molar mass of CO is 28 g/mol, so the number of moles of CO can be calculated as:

Moles of CO = Mass of CO / Molar mass of CO

Moles of CO = 4000 g / 28 g/mol = 142.86 mol

Similarly, the molar mass of O₂ is 32 g/mol, so the number of moles of O₂ can be calculated as:

Moles of O₂ = Mass of O₂ / Molar mass of O₂

Moles of O₂ = 4.0 g / 32 g/mol = 0.125 mol

Next, we need to determine the limiting reactant. The balanced equation for the reaction between CO and O2 is:

[tex]2CO + O_2 \rightarrow 2CO_2[/tex]

From the equation, we can see that the stoichiometric ratio between CO and O₂ is 2:1. This means that for every 2 moles of CO, we need 1 mole of O₂ to react completely. In this case, we have 0.089 mol of CO and 0.125 mol of O₂. Since the stoichiometric ratio requires 2 moles of CO for every mole of O₂, it means that the O₂ is present in excess. Therefore, CO is the limiting reactant.

Since 1 mol of CO reacts with 1 mol of O₂ to produce 1 mol of CO₂, the maximum number of moles of CO₂ that can be recovered is equal to the number of moles of CO, which is 0.089 mol.

To know more about number of moles here https://brainly.com/question/14357742

#SPJ4

The speed per day of the hawksbill sea turtle during this interval is 7.5 km/day.

The speed of the hawksbill sea turtle can be analyzed from the graph given above. The graph shows that the hawksbill sea turtle was travelling at a speed of 15 km/day at the start of the interval. This speed gradually decreased and reached a minimum of 0 km/day in the middle of the interval. After that, the speed increased again and reached a maximum of 15 km/day at the end of the interval.
To determine the speed per day of the hawksbill sea turtle during this interval, we need to calculate the average speed. The formula to calculate average speed is:
Average speed = total distance ÷ total time
Since we do not have the distance or time information, we cannot use this formula. However, we can still calculate the average speed by dividing the total distance travelled by the number of days.
Total distance travelled = 30 km (15 km to the left and 15 km to the right of the starting point)
Number of days = 4 (from Day 1 to Day 4)
Therefore, the average speed of the hawksbill sea turtle during this interval is:
Average speed = total distance travelled ÷ number of days
Average speed = 30 km ÷ 4 days
Average speed = 7.5 km/day
Therefore, the speed per day of the hawksbill sea turtle during this interval is 7.5 km/day.

learn more about speed Refer: https://brainly.com/question/31052185

#SPJ11

The vapor pressure of a given liquid will increase if its temperature is increased.  Which increases the number of molecules present in the vapor phase and hence the pressure exerted by the vapor.

Vapor pressure is defined as the pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases at a given temperature in a closed system. The vapor pressure of a given liquid will increase if its temperature is increased.

This leads to an increase in the number of molecules that are present in the vapor phase, which in turn increases the pressure exerted by the vapor.In conclusion, the vapor pressure of a given liquid will increase if its temperature is increased. This can be explained by the fact that an increase in temperature leads to an increase in the number of molecules that evaporate from the liquid surface.

To know more about liquid visit:

https://brainly.com/question/20922015

#SPJ11

We can see here that in order to find the the ratio of hydrogen nuclei to helium nuclei in the solar wind sample that you have gathered, here is guide:

A ratio is a mathematical comparison between two or more quantities or numbers. It expresses the relationship or proportion between the quantities being compared. Ratios are often written in the form of a fraction or using a colon (:).

Ratios can be simplified or expressed in different forms, such as as a decimal or percentage.

Learn more about ratio on https://brainly.com/question/12024093

#SPJ4

The compound that has the highest percent composition by mass of nitrogen is ammonium nitrate. It has a chemical formula NH4NO3, where nitrogen accounts for 63.04% by mass.What is a compound?A compound refers to a chemical substance that is composed of two or more atoms from distinct elements that are chemically bound together.

Elements can be combined in different ratios to form a range of compounds, with each having its own distinct chemical and physical properties. The compounds can be classified based on their types of chemical bonds, which include ionic bonds, covalent bonds, and metallic bonds. The formation of chemical bonds can be an exothermic or endothermic process.What is nitrogen?Nitrogen is a chemical element with the atomic number 7. It is a diatomic gas that accounts for around 78% of the Earth's atmosphere. Nitrogen is essential for life as it is a key component of nucleic acids, amino acids, and other organic molecules.What is percent composition by mass?The percentage by mass is the ratio of the mass of a specific element to the total mass of the compound, expressed as a percentage. It is calculated by using the molecular formula of the compound to determine its molar mass and then calculating the mass of the element of interest as a fraction of the total molar mass.How is percent composition by mass calculated?The percent composition by mass is calculated using the following formula:Percent composition by mass of an element in a compound = (mass of the element in 1 mole of the compound / molar mass of the compound) x 100What is ammonium nitrate?Ammonium nitrate is a chemical compound that has the molecular formula NH4NO3. It is a white crystalline substance that is highly soluble in water. It is commonly used as a fertilizer due to its high nitrogen content. Additionally, it is used as an explosive in the mining industry.

For more information on ammonium nitrate visit:

brainly.com/question/5148461

#SPJ11

An empirical formula represents the simplest ratio of atoms present in a compound. To determine the empirical formula, we need to simplify the given formulas to their simplest ratios.

Let's analyze the options:

A) CH2OHCH2OH: This formula can be simplified to C2H6O2. However, it is not in its simplest ratio, so it is not an empirical formula.

B) H2C204: This formula is already in its simplest ratio, so it is an empirical formula.

C) H2CO3: This formula is also already in its simplest ratio, so it is an empirical formula.

D) CH3COOH: This formula can be simplified to C2H4O2. However, it is not in its simplest ratio, so it is not an empirical formula.

Therefore, the empirical formulas among the given options are B) H2C204 and C) H2CO3.

To know more about empirical formula click this link -

brainly.com/question/32125056

#SPJ11

By examining the presence of specific fossilized structures and their relation to taxonomic classifications, this research aims to contribute to the understanding of how fossils can aid in classifying organisms.

Testable Question: How does the presence of specific fossilized structures relate to the classification of organisms at different taxonomic levels?

Hypothesis: If specific fossilized structures are indicative of the classification of organisms at different taxonomic levels, then consistent patterns of these structures should be observed within taxonomic groups.

To investigate this question, a comprehensive study involving a diverse range of fossil samples would be conducted. Fossils representing various taxonomic groups, such as phyla, classes, and orders, would be collected and thoroughly examined. The focus would be on identifying and documenting specific structures associated with each taxonomic group, such as skeletal elements, shell morphology, or tooth structures.

By analyzing the presence or absence of these structures across the fossil samples and comparing them within taxonomic groups, patterns can be identified. Statistical analysis would be employed to determine the significance of these patterns and assess the reliability of using specific fossilized structures for classification.

The results would provide insights into the relationship between fossilized structures and taxonomic classifications. If consistent associations are found, it would support the hypothesis and indicate the usefulness of specific structures for classification. However, if variations or inconsistencies are observed, it would highlight the need for further investigation and refinement of classification criteria.

In conclusion, by examining the presence of specific fossilized structures and their relation to taxonomic classifications, this research aims to contribute to the understanding of how fossils can aid in classifying organisms.

To know more about Fossil related question visit:

https://brainly.com/question/31419516

#SPJ11

Yes, it is possible to change the molecular attraction of water by adding certain substances to it.

Water is a polar molecule, which means that it has a partial positive charge on one end and a partial negative charge on the other end. This polarity gives water its unique properties, including its ability to dissolve many substances. However, the molecular attraction of water can be altered by adding certain substances to it.

For example, when salt is added to water, the salt ions break apart and interact with the water molecules, disrupting their normal hydrogen bonding. This weakens the hydrogen bonds between the water molecules and makes it easier for the water to dissolve other substances. Similarly, when soap is added to water, the soap molecules form micelles that surround and trap dirt and oil particles. This changes the molecular attraction of the water and allows it to effectively clean surfaces that it would not normally be able to.

Therefore, by adding certain substances to water, it is possible to alter its molecular attraction and change its properties.

Learn more about hydrogen bonding here:

https://brainly.com/question/30885458

#SPJ11

a) Magnesium bubbles in acid: This is an example of a chemical property. Magnesium reacts with acid to produce hydrogen gas, which is observed as bubbles. The ability of magnesium to undergo a chemical reaction with acid is a characteristic of its chemical property.

b) The fireworks were gold and green: This is an example of a physical property. The color of fireworks is a visual characteristic that can be observed without changing the chemical composition of the fireworks. In this case, the physical property is the color of the fireworks, which appears as gold and green.

c) Alcohol boils at 60 degrees Celsius: This is an example of a physical property. Boiling point is a characteristic property of a substance, and in this case, the physical property is the boiling point of alcohol, which occurs at 60 degrees Celsius.

d) A nickel coin is shiny: This is an example of a physical property. Shiny or lustrous appearance is a visual characteristic of metals, including nickel. The ability of a substance to reflect light and appear shiny is a physical property.

e) Cars form rust: This is an example of a chemical property. Rust formation is a chemical reaction that occurs when iron or steel reacts with oxygen in the presence of moisture. The tendency of iron or steel to undergo corrosion and form rust is a chemical property.

To know more about hydrogen gas, please click on:

https://brainly.com/question/14355155

#SPJ11

The polyatomic ion formula that is NOT correct is C2O42-.Explanation:Polyatomic ions refer to ions made up of two or more atoms that are covalently bonded.

A polyatomic ion can either be positively or negatively charged. In general, polyatomic ions are formed due to the gain or loss of electrons by an atom or a group of atoms.To determine the formula of a polyatomic ion, it is important to know the valency of the atom or group of atoms that has formed the ion. The most commonly used polyatomic ions include ammonium ion (NH4+), hydroxide ion (OH-), carbonate ion (CO32-), bicarbonate ion (HCO3-), sulfate ion (SO42-), and phosphate ion (PO43-).

Among all these polyatomic ions, the one that is not correct is the carbonate ion (C2O42-). The correct formula for carbonate ion is CO32-. This is because carbonate ion contains three oxygen atoms and one carbon atom, thus it is represented by the formula CO32-.C2O42- would indicate the presence of two carbon atoms and four oxygen atoms which is incorrect. Therefore, the polyatomic ion formula that is NOT correct is C2O42-.

To know more about covalently bonded visit:-

https://brainly.com/question/19382448

#SPJ11

The number of moles of nitrogen monoxide equivalent to 4.55 × 10²⁴ molecules is 7.53 mol.


To find out how many moles of nitrogen monoxide are equivalent to 4.55 x 10²⁴ molecules, we need to use Avogadro's number (6.022 x 10²³) to convert from molecules to moles.

The formula to calculate the number of moles is:

Number of moles = Number of molecules / Avogadro's number

Now we can substitute the values given in the question:

Number of moles = 4.55 x 10²⁴ / 6.022 x 10²³

Number of moles = 7.53 mol

Therefore, 7.53 moles of nitrogen monoxide are equivalent to 4.55 x 10²⁴ molecules.

Learn more about moles here:

https://brainly.com/question/15209553

#SPJ11

The volume of the container that the gas is in is approximately 45.74 liters.

To determine the volume of the gas, we can use the Ideal gas law:

PV = nRT

Where:

P = Pressure

V = Volume

n = Number of moles of gas

R = Ideal gas constant (0.0821 L·atm/(mol·K))

T = Temperature in Kelvin

We have the following values:

P = 4.7 atm

n = 7.7 moles

R = 0.0821 L·atm/(mol·K)

T = 329 K

Now we can rearrange the Ideal gas law equation to solve for V:

V = (nRT) / P

Substituting the given values into the equation:

V = (7.7 moles × 0.0821 L·atm/(mol·K) × 329 K) / 4.7 atm

V ≈ 45.74 L

Therefore, the volume of the container that the gas is in is approximately 45.74 liters.

Learn more about Volume from the link given below.

https://brainly.com/question/28058531

#SPJ4

The energy absorbed by the ladder is 26700 Joules. This is the amount of energy required to increase the temperature of the ladder from 20 o C to 30 o C.

The specific heat capacity of aluminum is given as 0.89 J/g o C. A ladder of mass 3000 g has an initial temperature of 20 o C and was taken out in the sun for some time, after which the temperature increased to 30 o C. To determine the amount of energy absorbed by the ladder, the change in temperature needs to be calculated, and then the formula for specific heat capacity can be used. Let's first calculate the change in temperature:ΔT = Final Temperature - Initial Temperature ΔT = 30 o C - 20 o CΔT = 10 o C.

Therefore, the temperature of the ladder increased by 10 o C. Now, we can use the formula for specific heat capacity to calculate the energy absorbed by the ladder. Q = mcΔTQ = (3000 g) (0.89 J/g o C) (10 o C)Q = 26700 Joules The energy absorbed by the ladder is 26700 Joules. This is the amount of energy required to increase the temperature of the ladder from 20 o C to 30 o C.

To know more about energy visit:-

https://brainly.com/question/18717831

#SPJ11

Hydrogen sulfide (H2S) has all of the intermolecular forces, which are dipole-dipole forces, dispersion forces, and hydrogen bonding. Thus, the answer is D) all of the above.

Intermolecular forces are the forces that hold molecules together and influence the physical and chemical properties of the substance. These forces arise due to the electrostatic interactions between the atoms of different molecules. Dipole-dipole forces, dispersion forces, and hydrogen bonding are the three intermolecular forces.

The three types of intermolecular forces are as follows:

1. Dipole-dipole forces: This force arises due to the attraction between the positive and negative ends of two polar molecules.

2. Dispersion forces: Dispersion forces are the attractive forces between nonpolar molecules due to temporary fluctuations in the electron cloud.

3. Hydrogen bonding: This bond occurs when hydrogen is bonded to fluorine, oxygen, or nitrogen, and the hydrogen atom is weakly bonded to an unshared electron pair of another atom of a neighboring molecule.

To learn more about Hydrogen visit;

https://brainly.com/question/30623765

#SPJ11

To calculate the density of the coin, we need to use the formula for density, which is density = mass/volume. In this case, we are given the mass of the coin as 0.5 g. However, we need to determine the volume of the coin in order to calculate the density.

Since the coin is assumed to be a perfect cylinder, we can use the formula for the volume of a cylinder, which is volume = π * radius^2 * height. However, we are not given the height of the coin. Therefore, we need to make an assumption about the height of the coin.

Let's assume that the height of the coin is 0.2 cm. Now we can calculate the volume of the coin using the formula. The radius is given as 0.7 cm, so the volume becomes volume = π * (0.7 cm)^2 * 0.2 cm.

Substituting the values into the formula, we get volume = 0.308 cm^3. Now we can calculate the density by dividing the mass of the coin by its volume: density = 0.5 g / 0.308 cm^3.

Performing the calculation, the density of the coin is approximately 1.625 g/cm^3.

It is important to note that the assumption made about the height of the coin affects the calculated density. If the actual height of the coin is different, the density will also be different. Therefore, it is necessary to ensure accurate measurements of the coin's dimensions for a precise calculation of density.

To Learn more about density. Click this!

brainly.com/question/12549173

#SPJ11

To calculate the expansion work done by the gas, we need to consider the change in external pressure when blocks are removed from the piston. For each scenario (i.e., removing nine blocks at once, removing eight blocks at once, and removing eight blocks in two batches), we can calculate the work using the formula W = -Pext * ΔV.

The expansion work done by a gas can be calculated using the formula W = -Pext * ΔV, where W is the work done, Pext is the external pressure, and ΔV is the change in volume of the gas. In this case, the external pressure is composed of 9 atm due to nine blocks and 1 atm due to atmospheric pressure.

For scenario (i), when all nine blocks are removed at once, the external pressure decreases from 10 atm to 1 atm. The change in volume, ΔV, is the difference between the final and initial volumes of the gas. Since the cylinder has movable piston, the volume increases, and ΔV is positive.

Similarly, for scenarios (ii) and (iii), the external pressure decreases from 10 atm to 2 atm when eight blocks are removed. The change in volume, ΔV, is calculated based on the corresponding change in the number of blocks removed.

By substituting the appropriate values into the formula W = -Pext * ΔV, we can calculate the expansion work done by the gas for each scenario.

To learn more about atmospheric pressure, click here;

brainly.com/question/31634228

#SPJ11

C) 202.6 kPa; 405.2 kPa

When Carl and his lab partner force the gases into a smaller, 1 liter container, the total pressure exerted on the container will increase based on Boyle's Law. Boyle's Law states that the pressure and volume of a gas are inversely proportional at constant temperature.

Since the original total pressure of each gas is 101.3 kPa, the new total pressure in the smaller container will be double that amount, resulting in 202.6 kPa. This eliminates options A and B.

The partial pressure of each gas will remain the same as before, even when the volume changes. This is because the gases are confined to the same volume ratio within the new container. Therefore, the new partial pressure of each gas will still be 101.3 kPa.

So, the correct answer is:

C) 202.6 kPa; 405.2 kPa

To know more about partial pressure click this link -

brainly.com/question/30114830

#SPJ11

With a higher resistance lightbulb, the current flowing through the flashlight will decrease, assuming the voltage remains constant by Ohm's Law.

If the voltage of the battery remains the same while changing the lightbulb in a flashlight, the current going through the flashlight will decrease. This is because of Ohm's Law, which states that the current (I) flowing through a circuit is inversely proportional to the resistance (R) in the circuit, given a constant voltage (V). Mathematically, this can be expressed as:

[tex]I=\frac{V}{R}[/tex]

Since the resistance of the new lightbulb is higher than the resistance of the previous one, the overall resistance in the circuit increases. As a result, the current flowing through the circuit decreases. This is because a higher resistance restricts the flow of electric current.

Learn more about Ohm's Law here:

brainly.com/question/1247379

#SPJ11.

To calculate the maximum wavelength of light required to break a nitrogen-oxygen (N-O) single bond, we can use the relationship between energy, wavelength, and frequency of light.

The energy required to break the bond is given as 157 kJ/mol. We can convert this energy to joules by multiplying it by 1000 to get 157,000 J/mol.

Using the equation E = hc/λ, where E is the energy of a photon, h is the Planck's constant (approximately 6.626 x 10^-34 J·s), c is the speed of light (approximately 3.00 x 10^8 m/s), and λ is the wavelength of light.

Rearranging the equation, we have λ = hc/E.

Substituting the values into the equation, we get:

λ = (6.626 x 10^-34 J·s x 3.00 x 10^8 m/s) / (157,000 J/mol)

Simplifying, we find:

λ ≈ 1.34 x 10^-6 m

Therefore, the maximum wavelength of light required to break a nitrogen-oxygen single bond is approximately 1.34 micrometers (μm).

To know more about  maximum wavelength click this link-

https://brainly.com/question/2600091

#SPJ11

The digestive and respiratory systems work together to provide the body with the nutrients and oxygen it needs to function. The digestive system breaks down food into smaller molecules that can be absorbed by the body.

The respiratory system delivers oxygen to the blood, which carries it to the cells throughout the body. The cells use the oxygen to break down the food molecules into energy. The digestive system also produces carbon dioxide as a waste product. The respiratory system removes carbon dioxide from the blood and releases it into the air. In addition to their shared role in providing the body with nutrients and oxygen, the digestive and respiratory systems also work together to protect the body from harmful substances. The digestive system produces digestive enzymes that break down food, but these enzymes can also damage the cells of the digestive tract. The respiratory system produces mucus that traps harmful particles in the air before they can reach the lungs.

The digestive and respiratory systems are two very important systems that work together to keep the body healthy. An example of how the digestive and respiratory systems work together is when the epiglottis, a flap of tissue that covers the trachea when you swallow, prevents food from entering your lungs.

To know more about Respiratory Systems, click here:-

https://brainly.com/question/4190530

#SPJ11

The molality of 6.0 M H2SO4 solution is 10.48 m. Given:Molarity of H2SO4 solution (M) = 6.0 MDensity of H2SO4 solution (d) = 1.34 g/mLWe are supposed to find the molality of the given solution.

Now, we can rewrite the expression for moles of solute as follows:(moles of solute) = (M) x (mass of solution / d) = (M) x (volume of solution x d / d) = (M) x (volume of solution)Now, let's find the mass of solvent in kg.1 L of solution = volume of solvent + volume of soluteWe know that density (d) = mass of solution / volume of solutionSo, mass of solution = density x volume of solution= 1.34 g/mL x 1000 mL = 1340 gNow, the mass of solute = volume of solution x density - mass of solvent= 1000 mL x 1.34 g/mL - 1340 g= 1340 g - 1340 g= 0 g (as the mass of solute is negligible)Now, mass of solvent = mass of solution= 1340 g.

Now, let's calculate the molality: molality = (moles of solute) / (mass of solvent in kg)molality = (M) x (volume of solution) / (mass of solvent in kg)molality = 6.0 M x (1000 mL / 1000 g) / (1340 g / 1000 g)= 6.0 x 0.74627 / 1.34= 3.1326≈ 10.48 mTherefore, the molality of the 6.0 M H2SO4 solution is 10.48 m.

To know more about solution visit:

https://brainly.com/question/15757469

#SPJ11

If there are two similar polyatomic ions between oxygen and another element, the ion with more oxygens will usually end in -ate.

Oxygen combines with other elements to form polyatomic ions. Polyatomic ions are ions composed of two or more atoms. Some examples of polyatomic ions that contain oxygen are sulfate (SO42-), nitrate (NO3-), and carbonate (CO32-).

When there are two similar polyatomic ions between oxygen and another element, the ion with more oxygens will usually end in -ate. For example, there are two polyatomic ions containing nitrogen and oxygen: NO2- (nitrite) and NO3- (nitrate). Since nitrate has one more oxygen atom than nitrite, it is the ion that ends in -ate. This is also the case for other polyatomic ions, such as phosphate (PO43-) and chlorate (ClO3-).

Learn more about polyatomic ions here:

https://brainly.com/question/6689894

#SPJ11

The molar volume of a gas at standard temperature and pressure is 22.4 L.

Molar volume is defined as the volume of 1 mole of gas at standard temperature and pressure (STP). The molar volume of a gas is represented by the symbol Vm.

It has a value of 22.4 L mol-1 at STP.

Hence, the molar volume of a gas at standard temperature and pressure is 22.4 L. STP is defined as a temperature of 273 K (0°C) and a pressure of 1 atm (atmosphere) or 101.3 kPa (kilopascals).

Molar volume is important in various fields of study, such as chemistry, physics, and engineering.

To learn more about pressure visit;

https://brainly.com/question/30673967

#SPJ11

In the chemical formula 5N2O, the subscript 2 represents that there are two atoms of nitrogen (N) per molecule. The subscript 5 indicates that there are five molecules of N2O.

To determine the total number of oxygen (O) atoms, we multiply the number of molecules (5) by the number of oxygen atoms per molecule (1).

5 molecules × 1 oxygen atom per molecule = 5 oxygen atoms

Therefore, in the chemical formula 5N2O, there are a total of 5 oxygen atoms present.

To know more about chemical formula click this link -

brainly.com/question/32228478

#SPJ11

In NH2Br, there are a total of 6 bonds. To determine the number of polar and non-polar bonds, we need to examine the electronegativity difference between the atoms involved in each bond.

In NH2Br, the central atom is nitrogen (N), and it is bonded to two hydrogen atoms (H) and one bromine atom (Br).

The N-H bonds are polar because nitrogen is more electronegative than hydrogen, creating a partial negative charge on nitrogen and a partial positive charge on hydrogen.

The N-Br bond is also polar because nitrogen is more electronegative than bromine, resulting in a partial negative charge on nitrogen and a partial positive charge on bromine.

Therefore, in NH2Br, there are 3 polar bonds (N-H, N-H, N-Br) and 3 non-polar bonds (H-H, H-H, Br-H).

To summarize:

Total bonds: 6

Polar bonds: 3 (N-H, N-H, N-Br)

Non-polar bonds: 3 (H-H, H-H, Br-H)

It's important to note that the polarity of a bond is determined by the electronegativity difference between the atoms involved. If the electronegativity difference is significant, the bond is considered polar; otherwise, it is considered non-polar.

To know more about bond click this link -

brainly.com/question/30508122

#SPJ11

We can see that it is false that [tex]N_{2}[/tex] and CO have same number of electrons, protons and neutrons.

A neutron is a subatomic particle that is one of the building blocks of atoms. It is classified as a nucleon, along with protons, which are the other type of particle found in an atom's nucleus.

[tex]N_{2}[/tex] refers to a nitrogen molecule, which consists of two nitrogen atoms bonded together. The atomic number of nitrogen (N) is 7, which means it has 7 protons and 7 electrons.

On the other hand, CO represents a carbon monoxide molecule, which consists of one carbon atom bonded to one oxygen atom. Carbon (C) has an atomic number of 6, indicating it has 6 protons and 6 electrons.

Learn more about neutron on https://brainly.com/question/26952570

#SPJ4

The complete question is:

N2 and CO have the same number of electrons protons and neutrons reason?