How many grams of steam at 100 °C would be required to raise the temperature
of 47.6 g solid benzene (CH) from 5.5 °C to 30.0 °C? Assume that heat is only
transferred from the steam (and not liquid water) and that the steam/water and
benzene are separated by a glass wall and do not mix. (The melting point of ben-
zene is 5.5 °C; AHus for benzene is 9.87 kJ/mol; specific heat for benzene is 1.63
J/g• °C; AH for steam at 100 °C is 40.7 kJ/mol.)
vap

The reducing agent in the reaction 2Li(s) + Fe(CH₃COO)₂(aq) → 2LiCH₃COO(aq) + Fe(s) is lithium (Li).

The general reaction is:

2Li(s) + Fe(CH₃COO)₂(aq) → 2LiCH₃COO(aq) + Fe(s)   (1)

We can write the above reaction in two reactions, one for oxidation and the other for reduction:

Li⁰(s) → Li⁺(aq) + e⁻   (2)

Fe²⁺(aq) + 2e⁻ → Fe⁰(s)    (3)

We can see that Li⁰ is oxidizing to Li⁺ (by losing one electron) in the lithium acetate (reaction 2) and that Fe²⁺ in iron(II) acetate is reducing to Fe⁰ (by gaining two electrons) (reaction 3).  

We must remember that the reducing agent is the one that will be oxidized by reducing another element and that the oxidizing agent is the one that will be reduced by oxidizing another species.

In reaction (1), the reducing agent is Li (it is oxidizing to Li⁺), and the oxidizing agent is Fe(CH₃COO)₂ (it is reducing to Fe⁰).  

Therefore, the reducing agent in reaction (1) is lithium (Li).  

Learn more here:

I hope it helps you!

Answer:

›› FeBr2 molecular weight. Molar mass of FeBr2 = 215.653 g/mol. This compound is also known as Iron(II) Bromide. Convert grams FeBr2 to moles or moles FeBr2 to grams. Molecular weight calculation: 55.845 + 79.904*2 ›› Percent composition by element

Explanation:

If 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

Mass is defined as a way to gauge how much matter there is in a substance or thing. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.

Given Fe = 38.6 g.

Fe has a molar mass = 55.845 g/mol.

Given mass/molar mass equals 38.6g/55.845gmol-1, or 0.6912 moles of iron.

The reaction is described as Fe + Br2 FeBr2.

One mole Fe yields 1 mole of FeBr2.

FeBr2 would be produced from 0.6912 moles of Fe.

FeBr2 has a molar mass of 215.65 g/mol.

Moles of FeBr2 x Molar mass of FeBr2

= 215.65 g/mole x 0.6912 mole

= 149.06 g FeBr2 produced is the formula.

Thus, if 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ2

Answer:

umm

Explanation:

matter makes up everything. everything is matter

the more matter an object has the more mass It has

Answer:

Explanation:

The actual boiling point is probably between 34C and 40C.

Temperature measures the average kinetic energy of particles of the substances. Therefore, the correct option is option D that is the actual boiling point is probably between 34°C and 40°C.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

The actual boiling point is probably between 34°C and 40°C.

Therefore, the correct option is option D.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ2

Answer:

Meiosis produces haploid cells (gametes), which contain single chromosomes, or on-half the number of chromosomes in diploid cells. When a sperm and an egg join, the single chromosomes pair up, which results in genetic diversity in the offspring

Answer:

go get the stuff.

Explanation:

This  problem provides the molar mass and radius of a metal that has an BCC unit cell and the density is required.

Firstly, we consider the formula that relates molar mass and also includes the Avogadro's number and the volume of the unit cell:

[tex]\rho =\frac{Z*M}{V*N_A}[/tex]

Whereas Z stands for the number of atoms in the unit cell, M the molar mass, V the volume and NA the Avogadro's number. Next, since BCC is able to hold 2 atoms and M and NA are given, we calculate the volume of the atom in the unit cell given the radius in meters:

[tex]V=a^3=(\frac{4R}{\sqrt{3} } )^3=(\frac{4*1.74x10^{-10}m}{\sqrt{3} } )^3=6.49x10^{-29}m^3[/tex]

And finally the required density in g/cm³:

[tex]\rho =\frac{2*341.1g/mol}{6.49x10^{-29}m^3\frac{m^3}{atom} *6.022x10^{23}\frac{atom}{mol} } =17455257.8g/m^3\\\\\rho=17.5g/cm^3[/tex]

Learn more:

Work is said to be done if the force applied to a body causes the body to move through a distance.

Student B used more work and power

Workdone = Force * Distance

For student A:

Force = 3N

distance = 5meters

Time taken = 10 secs

Workdone by Student A = 3 * 5

Workdone by student A = 15Nm

Power used up = workdone/time

Power used up = 15/10

Power used up = 1.5 Watts

For student B:

Force = 6N

distance = 5meters

Time taken = 5 secs

Workdone by Student A = 6 * 5

Workdone by student A = 30Nm

Power used up = workdone/time

Power used up = 30/5

Power used up = 6 Watts

This shows that student B used more work and power

Learn more here: https://brainly.com/question/6701368

This problem is describing the equilibrium whereby hydrofluoric acid decomposes to hydrogen and fluorine gases at 298 K whose equilibrium constant is 8.70x10⁻³, the equilibrium concentrations of all the reactants are both 1.33x10⁻³ M and asks for the initial concentration of hydrofluoric acid which turns out to be 2.86x10⁻³ M.

Then, we can write the following equilibrium expression for hydrofluoric acid once the change, [tex]x[/tex], has taken place:

[tex][HF]=[HF]_0-2x[/tex]

Now, since both products are 1.33x10⁻³ M we infer the reaction extent is also 1.33x10⁻³ M, and thus, we can calculate the equilibrium concentration of HF via the law of mass action (equilibrium expression):

[tex]8.70x10^{-3}=\frac{(1.33x10^{-3} M)^2}{[HF]} }[/tex]

[tex][HF]=\frac{(1.33x10^{-3} M)^2}{8.70x10^{-3}} }=2.03x10^{-4}M[/tex]

Finally, the initial concentration of HF is calculated as follows:

[tex][HF]_0=[HF]+2x=2.033x10^{-4}+2*(1.33x10^{-3})=2.86x10^{-3}M[/tex]

Learn more:

Answer:

Explanation:

First you will find the mole from the molarity and then the desired mass from the mole.

A cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. The entropy of the gas is 1.18 J/K and the change in the entropy of the environment is -1.18 J/K.

A cylindrical weight with a mass (m) of 3 kg is dropped, that is, its initial velocity (u) is 0 m/s and travels 10 m (s). Assuming the acceleration (a) is that of gravity (9.8 m/s²). We can calculate the velocity (v) of the weight in the instant prior to the collision with the piston using the following kinematic equation.

[tex]v^{2} = u^{2} + 2as = 2 (9.8 m/s^{2} ) (10m) \\\\v = 14 m/s[/tex]

The object with a mass of 3 kg collides with the piston at 14 m/s, The kinetic energy (K) of the object at that moment is:

[tex]K = \frac{1}{2} m v^{2} = \frac{1}{2} (3kg) (14m/s)^{2} = 294 J[/tex]

The kinetic energy of the weight is completely converted into heat transferred into the gas cylinder. Thus, Q = 294 J.

Given all the process is at 250 K (T), we can calculate the change of entropy of the gas using the following expression.

[tex]\Delta S_{gas} = \frac{Q}{T} = \frac{294 J}{250K} = 1.18 J/K[/tex]

The change in the entropy of the environment, has the same value but opposite sign than the change in the entropy of the gas. Thus, [tex]\Delta S_{env} = -1.18 J/K[/tex]

A cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. The entropy of the gas is 1.18 J/K and the change in the entropy of the environment is -1.18 J/K.

Learn more: https://brainly.com/question/22655760

Answer:

la primera va con la última

Answer:

Many chemical reactions are reversible; that is, the products of the reaction can combine to re-form the reactants. An example of a reversible reaction is that of hydrogen with iodine to form hydrogen iodide:

H2(g) + I2(g) 2 HI(g)

We can study this reversible reaction by placing hydrogen and iodine in a reaction vessel and then measuring the concentrations of H2, I2, and HI at various times after the reactants are mixed. Figure 13.8 is a plot of the concentrations of reactants and products of this reaction versus time. The concentration of hydrogen iodide increases very rapidly at first, then more slowly, and finally, after the time indicated by the vertical line marked "Equilibrium," remains constant. Similarly, the concentrations of hydrogen and iodine are large at the start of the reaction but decrease, rapidly at first, and then more slowly. Finally, they, too, become constant.

If this reaction were not reversible, the concentrations of hydrogen and iodine would have continued to decrease and the concentration of hydrogen iodide to increase. This process does not happen. Instead, as soon as any molecules of hydrogen iodide are formed, some decompose into hydrogen and iodine. Two reactions are taking place simultaneously: the formation of hydrogen iodide and its decomposition. When the concentrations of all these components become constant (at the equilibrium point in Figure 13.8), the rate of the forward reaction (H2 + I2 2 HI) must be equal to the rate of the reverse reaction (2 HI H2 + I2). A state of dynamic chemical equilibrium has then been reached, one in which two opposing reactions are proceeding at equal rates, with no net changes in concentration.

PICTURE 13.8

FIGURE 13.8 Concentration changes during the reversible reaction

H2(g) + I2(g) 2 HI as it proceeds toward equilibrium.

We have encountered this criterion for equilibrium before. In the equilibrium between a liquid and its vapor, the rate of vaporization is equal to the rate of condensation. In the equilibrium of a saturated solution with undissolved solute, the rate of dissolution is equal to the rate of precipitation. In the equilibrium of a weak acid with its ions, the rate of dissociation is equal to the rate of recombination. Note that none of these reactions is static: Two opposing changes are occurring at equal rates.

B. The Characteristics of Chemical Equilibrium

1. Equal rates

At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.

2. Constant concentrations

At equilibrium, the concentrations of the substances participating in the equilibrium are constant. Although individual reactant molecules may be reacting to form product molecules and individual product molecules may be reacting to re-form the reactants, the concentrations of the reactants and the products remain constant.

3. No free energy change

At equilibrium, the free energy change is zero. Neither the forward nor the reverse reaction is spontaneous and neither is favored. Consider the ice-water change. Above 0°C, ice melts spontaneously to form liquid water; G for this change is negative. Below 0°C, the change from ice to water is not spontaneous; G is positive. At 0°C, the two states are in equilibrium. The rate of melting is equal to the rate of freezing: the amount of ice and water and the amount of liquid water present remain constant, and the free energy change is zero as long as no energy is added to or subtracted from the mixture.

C. The Equilibrium Constant

In Chapter 12, we introduced the mathematical relationship between the concentrations of the components of an equilibrium, known as the equilibrium constant, Keq. We said that, for the general equation of a reversible reaction

Explanation:

sorry(: hope to help

Answer:

The element X is sulfur.

Sulfur will gain 2 electrons to become an ion.

The charge of sulfide ion is (2-).

Explanation:

Answer: specialized body structures of Snakes

Explanation:

Snakes have many adaptations that allow them to move, hunt, eat and survive in their environments. Many animals have developed specific parts of the body adapted to survival in a certain environment. Among them are webbed feet, sharp claws, whiskers, sharp teeth, large beaks, wings, and hooves. In most aquatic animals, swimming is a must. To aid swimming, many animals have adapted and evolved with webbed feet.

Fire extinguishment is referred to the stage in which flames are not visible

and the combustible item no longer generates heat.

This stage refers to when the fire has been put out through a fire

extinguisher or other compounds.   When fire is put out, there is no longer

flames present.

The absence of flames also means that there is no heat generation or

combustion products due to the absence of a heat source.

Read more on https://brainly.com/question/24313137

This is the answer i hope it helps

A sample of gas has Pi = 0.768 ATM, Vi = 10.5 L, and Ti = 300 K. What is the final pressure if VF = 7.85 L and T and f = 250 K?

Answer:

The answer is A and C.

Explanation:

The reactants in the process of cellular respiration are oxygen and glucose, respectively. It is ATP that serves as the primary product of cellular respiration, with carbon dioxide and water serving as waste products.

Sugar is a glucose.

Oxygen and glucose are the two  substances that are reactants in the chemical reactions of cellular respiration. Therefore, the correct options are options A, C.

Through the process of cellular respiration, organisms mix oxygen with food molecules, directing the chemical energy contained in these substances towards life-sustaining processes while excreting carbon dioxide and water as waste. Foods are broken down by microorganisms that do not require oxygen in a process known as fermentation.

Adenosine triphosphate (ATP), an energy-rich compound that absorbs the chemical energy generated by the decomposition of food molecules then releases it to power other cellular functions, is one goal of the breakdown of foodstuffs. ATP is created when the energy found inside chemical bonds is converted from one form to another. Oxygen and glucose are the two  substances that are reactants in the chemical reactions of cellular respiration.

Therefore, the correct options are options A, C.

To know more about cellular respiration, here:

https://brainly.com/question/29760658

#SPJ2

Answer:

A: Calcium is a group 2 element with two valence electrons. Therefore, it is very reactive and gives up electrons in chemical reactions. It is likely to react with an element with six valence electrons that “wants” to gain two electrons. This would be an element in group 6, such as oxygen.

Answer:

landslide mudflows slump and creep

Explanation:

no explanation

Answer:

This tells you that one mole of sulfur atoms, S , has a mass of 32 g

Answer:

you're welcome

Answer:,   Correct option is    0.288m/s

Explanation:    

The relationship between the velocity of the wave, its wavelength and frequency is given by the formula

Wavelengthλ=

Frequency(ν)

Speed(v)

​

,

where, v - velocity of the wave

           λ - wavelength of the wave

          f - frequency of the wave.

In the question it is given that the frequency is 4.8 Hz and the wavelength is 6.0 cm, that is, 0.06 meters.

The velocity of the sound is calculated as follows.

v=f×λ=4.8 Hz×0.06 m=0.288 m/s

Hence, the speed of the water wave is 0.288 m/s.

Using melting and boiling temperature, hardness and electric current passing testing.

Ionic solids are materials that have a strong bond between their ions, thus producing well-defined shapes.

In addition, due to this strong attraction, the boiling and melting temperatures of these materials are very high, in addition to the resistance to breakage presented by them.

Finally, ionic solids are also excellent conductors of electricity.

So, their properties used to determine whether or not they are ionic solids are  melting and boiling temperature, hardness and electric current passing testing.

Learn more about ionic solids: brainly.com/question/8236583

Answer:

We can do an experiment with vinegar to see what happens to the calcium in an eggshell when it is exposed to an acid.

found a picture hope this helps

The genetic makeup of the majority of these organisms is either RNA or DNA. For instance, some viruses' genetic material may be RNA whereas others' genetic material may be DNA. RNA is present in the Human Immunodeficiency Virus (HIV), which after adhering to the host cell, transforms into DNA.

DNA is a collection of molecules that is in charge of transporting and passing genetic information from parents to children. A ribonucleic acid called RNA aids in the body's production of proteins. In the human body, new cells are created as a result of this nucleic acid.

Instead of thymine, uracil is present in RNA. All other bases are same as DNA like adenine, guanine and cytosine. The order of bases in RNA is:

UAACGUCG.

To know more about RNA, visit;

https://brainly.com/question/14317249

#SPJ1

Answer:

this the partial removal of a substance from a solution or mixture by dissolving it in another immiscible solvent in which it is more soluble.

The major product obtained when 1-hexyne is treated with H2 and Pd is; 1-hexene.

The structure of 1-hexyne is such that it possesses a triple bond around its first Carbon in it's carbon chain.

On this note; hydrogenation by treatment with H2 and Paladium, Pd as catalyst yields 1-hexene as the major product.

PS: Paladium, Pd is the major constituent of the Lindlar's catalyst.

Read more:

https://brainly.com/question/18915727