The bond between sodium and chlorine in the compound sodium chloride (NaCl) is a/an:
Need help. Is this correct
Answer:
Yes, that is correct!
Explanation:
Answer:
Yes
Explanation:
A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms. These electrons are simultaneously attracted by the two atomic nuclei. A covalent bond forms when the difference between the electronegativities of two atoms is too small for an electron transfer to occur to form ions.
boron phosphite
Formula please help fast please please help me please please help
Answer: The formula for boron phosphite is BP
Explanation:
The answer would be BP
Hope this helped!
How many molecules are in 4.5 moles of Ca(OH),?
We will use dimensional analysis to solve this.
We will need to know Avogadro's number, which is 6.02 × 10²³.
4.5 mol × [tex]\frac{6.02 * 10^{23} molecules}{1 mol}[/tex] = 2.71 × 10²⁴ molecules.
There are 2.71 × 10²⁴ molecules in 4.5 moles of Ca(OH).
An atom has an atomic number of 15 and a mass number of 31. How many protons are there in the atom?
Answer:
No of protons = 15
Explanation:
Given that,
Atomic number = 15
Mass number = 31
We need to find the no of protons in the atom.
We know that,
No of protons = Atomic no of the atom
No of protons = 15
Hence, there are 15 protons in the atoms.
What are the atoms found at the bottom of the periodic table known as?
1. Two substances, both solids, start at the same temperature. You transfer
the same amount of energy into both solids, but substance 1 becomes a
liquid before substance 2. Which substance has a stronger molecular
attraction?
A Substance 1
B Substance 2
Please help I will give you Brainlyest
Answer:
B substance 2
Explanation:
1. Two substances, both solids, start at the same temperature. You transfer
the same amount of energy into both solids, but substance 1 becomes a
liquid before substance 2. Which substance has a stronger molecular
attraction?
A Substance 1
B Substance 2
Please help I will give you Brainlyest
Substance 2 has a stronger molecular attraction.
What are solids?Solid is one of the four fundamental states of matter. The molecules in a solid are closely packed together and contain the least amount of kinetic energy. A solid is characterized by structural rigidity and resistance to a force applied to the surface.
Both solids are supplied with an equal amount of energy. Out of both substances, substance 2 has a stronger molecular attraction due to which it can not easily change into a liquid while substance 1 has a lesser molecular attraction so supplying of few amounts of heat will change substance 1 into a liquid state.
Hence, Substance 2 has a stronger molecular attraction.
To learn more about solids, click here:
https://brainly.com/question/14424882
help help help plsss
Answer:
4.58×10^3
3.72×10^7
Explanation:
3.8×10^2 =380
+ 4.2×10^3=4200
= 4580 = 4.58×10^3
Convert 48.5 grams of water to moles of water
Answer:
2.70 mol of water.
Explanation:
divide the given mass by the molar mass of water. 48.5 / 18.016g = 2.70 mol water.
Which of the following properties would a substance that has metallic bonding
normally have?
I. thermal conductivity
II. electrical conductivity
III. malleability
IV. ductility
Answer:
I, II, III,IV
Explanation:
Metals are known to possess metallic bonds. In a metallic bond, electro-positive metals loose electrons which form a cloud of electrons which exerts an attractive force on the positive metallic ions. This attractive force holds the metal atoms together in the crystal lattice.
The physical properties of metals include;
I. thermal conductivity
II. electrical conductivity
III. malleability
IV. ductility
Hence, substances that exhibit properties I-IV are metals and have metallic bonds.
The following properties which a substance that has metallic bonding
normally have include
thermal conductivityelectrical conductivitymalleabilityductilityMetals are elements which have metallic bonding which is always strong as
it helps to form a lattice.
Metals are good conductors of heat and electric current , they can also be
bent in to different shapes . This means it has all the properties listed above.
Read more on https://brainly.com/question/20248759
I NEED HELP RN 40 POINTS
Answer:
B.) Adding a source of carbon dioxide to the water.
Explanation:
I had that question too.
what describes a property of all elements
Helpppppppppppppppppppppp
1. In which area are you most likely to find plants that can tolerate water that has a constantly
changing salt content?
A. a freshwater stream
B. an estuary
C. a a pond
D. a coral reef
Answer:
I would think B, an estuary. But I'm not sure.
Explanation:
The area where the plants should be find in which the water should be tolerated should be estuary.
What is an estuary?An estuary refer to the enclosed body with respect to the brackish water that have one or more rivers or streams that should be flow into it. Also, there should be free connection to the open sea. It should be considered as the transition zone that lies between the river environment and maritime environment
Therefore, we can conclude that the option b is correct.
Learn more about plants here: https://brainly.com/question/2725037
What is the amplitude ?
Answer: The amplitude is a measure of the strength or intensity of the wave
Explanation: when looking at a sound wave, the amplitude will measure the loudness of the sound.
To make a balanced equation, 6 H2O + 6 CO2 ---> C6H12O6 + _
Answer:
6O₂
General Formulas and Concepts:
Chemistry/Biology
Photosynthesis Equation: 6H₂O + 6CO₂ → C₆H₁₂O₆ + 6O₂Explanation:
Most of the equation comes from the Photosynthesis Equation. Plants take in water and carbon dioxide and sunlight (energy) to produce glucose and oxygen. When we balance the equation and predict reaction. we should get 6O₂ as our answer.
Mu Cephei is no longer considered a main sequnce star. This means it has run out of:
A:hydrogen
B:Helium
C:Oxygen
D:Iron
Answer:
A: Hydrogen
Explanation:
Plz give me brainliest it really helps!
Which of the following best describes the relationship between the speed of sound and the type of medium?
A.
Sound travels slower in air because of the large distance between air particles
B.
Sound travels slower in solids because of the small distance between solid particles
C.
Sound travels slower in air because of the small distance between air particles
D.
Sound travels slower in solids because of the large distance between solid particles
Answer:
A. Sound travels slower in air because of the large distance between air particles
Explanation:
Sound is a mechanical wave that requires a medium for its propagation. Without a medium, sound cannot go through easily or readily. This implies that sound cannot be propagated through a vacuum.
A vacuum is an empty space without any particles in side. Sound waves travel fastest the most in solids because the particles are dense and close to one another. The speed of sound in air is the least because of the large distance between air particles. Therefore, the speed of sound is medium dependentA coffee cup calorimeter contains 153.21 g of water at 22.50 °C. A 65.454 g piece of iron is heated to 101.62 °C. The piece of iron is added to the coffee cup caloriemter and the contents reach thermal equilibrium at 25.68 °C. The specific heat capacity of iron is 0.449 Jg·K and the specific heat capacity of water is 4.184 Jg·K. How much heat, , is lost by the piece of iron?
Answer:
Q = 2232J
Explanation:
In the system, the energy that is lost by the iron is:
Q = S*ΔT*m
Where Q is heat, S is specific heat of iron ΔT is change in temperature and m is mass of the piece of iron.
S = 0.449J/gK
ΔT = 101.62°C - 25.68°C = 75.94°C
m = 65.454g
Q = 0.449J/gK*75.94°C*65.454g
Q = 2232J
what volume of water has a mass of 1 kg
Answer:
[tex]V=0.001\ m^3[/tex]
Explanation:
Mass, m = 1 kg
The density of water, d = 1000 kg/m³
We need to find the volume of water. The formula for the density of an object is equal to mass divided by volume. Its formula is :
d = m/V
V is the volume of water
[tex]V=\dfrac{m}{d}\\\\V=\dfrac{1\ kg}{1000\ kg/m^3}\\\\=0.001\ m^3[/tex]
So, the volume of water is [tex]0.001\ m^3[/tex].
Answer:
Volume of water has a mass of 1 kg is explained below in details.
Explanation:
One liter of h2O has a volume of approximately specifically one kilogram when estimated at its maximum frequency, which happens at about 4 °C. It observes, therefore, that thousand of a liter, recognized as one milliliter (1 mL), of h2O has a volume of about 1 g; 1000 liters of h2O has a volume of about 1000 kg (1 tonne).
How many chlorine atoms are on the products side of the reaction 2 Li +
MgCl2 → 2 LiCl + Mg?*
Answer:
2 chlorine atoms on the product side.
Separate the following gene sequence into codons: TACGTCTTACGCTATGTC
Answer really quick plssss
Answer:
I think it's AUGCAGAAUGCGAUACAG
can yall help me wit this?
Answer:
the color change
What do you think causes a lunar eclipse? (Use your knowledge of solar eclipses and feel free to run the Gizmo to help you.)
Moon reflects the light frim the sun, thats why we are able to see it and it shines in the night. But, we know that Earth revolves around Sun and Moon revolves around Earth. During this revolution, Earth and Moon comes in a position when Earth is in the middle of the Moon and Sun. So, it blocks the light of Sun frim reaching Moon. Hence, we see no reflection and it causes Lunar eclipse.
Answer:
A total lunar eclipse occurs when the moon and the sun are on exact opposite sides of Earth. Although the moon is in Earth's shadow, some sunlight reaches the moon. The sunlight passes through Earth's atmosphere, which causes Earth's atmosphere to filter out most of the blue light.
Explanation:
which type of stress causes rocks to fold?
A.) compression
B.) shearing
C.) strike-slip-
D.) tension
Answer:
A. compression
Explanation:
the rock is unable to move causing it to stress
Answer: a. Compression
how many moles of oxygen molecules can be produced from 6 moles of lead oxide
Answer:
Moles of oxygen molecules produced = 3 mol
Explanation:
Given data:
Moles of oxygen molecules produced = ?
Number of moles of lead oxide decomposed = 6 mol
Solution:
Chemical equation:
2PbO₂ → 2PbO + O₂
Now we will compare the moles of oxygen and lead oxide.
PbO₂ : O₂
2 : 1
6 : 1/2×6 =3 mol
three moles of oxygen molecules are produced.
When a chemical change occurs:
A) the law of conservation of mass is always obeyed
B) the chemical properties of new substances are different from the ones you started with
C) all of the options are true
D) atoms are rearranged
Answer:
Are composed together
Explanation:
help me please i need help cuz its due today
Answer:
I believe the answer is a. I hope this helps
Which element has an electron configuration that ends in the fourth energy 1 point
level? *
D
ОО
C
Answer:
here
Explanation:
which is the halogen that is in Period 5? a. iodine (I) b. strontium (Sr) ... 4. Which is a transition element with five d-block electrons in energy level 4? ... Which region contains elements with an electron configuration that ends with p3? a. A b.
Missing: point | Must include: point
Which of the following best represents and explains the formula for a compound made from fluorine and hydrogen?
A. HF, because both fluorine and hydrogen are capable of forming only one ionic bond.
B. HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
C. H2F, because fluorine is short of two electrons, and hydrogen is short of one electron.
D. H2F, because fluorine is capable of forming one, and hydrogen is capable of forming two covalent bonds.
Thank you
The answer is B
HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
The formula for a compound made from fluorine and hydrogen is HF, because both fluorine and hydrogen are capable of forming only one covalent bond. The correct option is option B.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion. Covalent bond is weaker than ionic bond.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron.
The formula for a compound made from fluorine and hydrogen is HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
Therefore, the correct option is option B.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ2