Both have Giant Covalent Structures, resulting in very high melting temperatures. However each carbon atom in Diamond has 4 covalent bonds with other Carbons, making it extremely strong and hard. On the other hand, each carbon in graphite is bonded to three carbons, and therefore graphite is formed in layers.
The combination of ions most likely to produce a precipitate is Group of answer choices Mg2 and C2H3O2-. Fe3 and OH-. Li and PO43-. Pb2 and NO3-. NH4 and SO42-.
Answer:
The combination of ions most likely to produce a precipitate is a group of answer choices:
lead nitrate soluble in water
Mg2+ and C2H3O2-.
Fe3+ and OH-.
Li+ and PO43-.
Pb2+ and NO3-.
NH4+ and SO42-.
Explanation:
Among the given options,
magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.
The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.
[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.
A student makes several observations about a piece of iron. Which observation describes a chemical property of the iron?
Answer:
An example of a chemical property of iron would be that it is capable of combining with oxygen to form iron oxide, or rust.
Explanation:
You have no choice listed, so I provided an example.
Calculate the height of a column of ethanol (C2H5OH) that would be supported by atmospheric pressure. The density of ethanol is 0.789 g/cm3.
Answer:
The height of a column of ethanol is 13.1m
Explanation:
we begin by converting the density to SI unit= 0.789g/cm3* 1kg * [tex]100^{3}[/tex]* [tex]cm^{3}[/tex]
cm * 1000g * [tex]1^{3}m^{3}[/tex]
= 789kg/m3
converting pressure to SI unit= 1 atm =101325 Pa
hence P= hdg
g= 9.81 m/s2
making h the subject of the formula
h= P/dg
h= 101325Pa/ 789kg/m3 * 9.81 m/s2
h= 13.1m
The combustion of gasoline produces carbon dioxide and water. Assume gasoline to be pure octane (C8H18) and calculate the mass (in kg) of carbon dioxide that is added to the atmosphere per 1.0 kg of octane burned
Answer:
3.1 kg
Explanation:
Step 1: Write the balanced combustion equation
C₈H₁₈ + 12.5 O₂ ⇒ 8 CO₂ + 9 H₂O
Step 2: Calculate the moles corresponding to 1.0 kg of C₈H₁₈.
The molar mass of C₈H₁₈ is 114.23 g/mol.
1.0 × 10³ g × 1 mol/114.23 g = 8.8 mol
Step 3: Calculate the moles of CO₂ produced from 8.8 moles of C₈H₁₈
The molar ratio of C₈H₁₈ to CO₂ is 1:8. The moles of CO₂ produced are 8/1 × 8.8 mol = 70 mol.
Step 4: Calculate the mass corresponding to 70 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
70 mol × 44.01 g/mol = 3.1 × 10³ g = 3.1 kg
You burn a log on a fire. You use fire to warm yourself and help you see to read a book. What energy transformation is taking place?
Answer:
heat energy to keep you warm and light energy to be able to read your book
Explanation:
A sodium atom has 11 protons and 12 neutrons. What is the mass number of this sodium atom?
Sodium has a mass number of 23amu. Since sodium has 11 protons, the number of neutrons must be 23 – 11 = 12 neutrons.
Coupled reactions are: A. reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions. B. reactions in which exergonic reactions obtain the energy to go forward from endergonic reactions. C. reactions that lower the activation energy of another reaction. D. any reactions that are accelerated by an enzyme.
Answer:
A
Explanation:
Coupled reactions are reactions in which endergonic reactions obtain the energy to go forward from exergonic reactions.
When benzene diazonium chloride interacts with phenol, the para position of the phenol molecules is associated with the diazonium salt, resulting in
p-hydroxyazobenzene. The coupling reaction is the name given to this process.
During an experiment, solid iodine was placed in a sealed container. The container was gradually heated and purple-colored vapors of iodine formed were observed. Describe this system when it reaches phase equilibrium.
Answer:
See explanation
Explanation:
A system is said to have attained dynamic equilibrium when the rate of forward reaction and the rate of reverse reaction are equal.
Considering the system under consideration;
I2(s)⇄I2(g)
Heating the container converts solid iodine to purple coloured iodine vapour.
At equilibrium, there will be no net change in the amount of solid iodine and iodine vapour present in the system because the two processes (forward and reverse reactions) occur at the same rate at equilibrium.
use a periodic table to write the electron configuration of selenium
Answer: The electronic configuration of selenium is [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^4[/tex]
Explanation:
The atomic number is defined as the number of protons or number of electrons present in a neutral atom.
Number of electrons will be equal to the atomic number of an atom.
Electronic configuration is defined as the representation of electrons in an atom.
Selenium is the 34th element of the periodic table.
The electronic configuration of Selenium is [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^4[/tex]
It has 6 electrons that are present in the outermost shell.
What is matter mad of?
Answer:
Matter is made up of many elements
Answer:
matter is made of smallest tiniest invisible particles.
What are two factors that determine the concentration of hydronium (or hydroxide) ions in an acid (or base) solution?
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water (Kw). The concentrations of these ions in a solution are often critical determinants of the solution’s properties and the chemical behaviors of its other solutes, and specific vocabulary has been developed to describe these concentrations in relative terms. A solution is neutral if it contains equal concentrations of hydronium and hydroxide ions; acidic if it contains a greater concentration of hydronium ions than hydroxide ions; and basic if it contains a lesser concentration of hydronium ions than hydroxide ions.
Answer:
hydronium and hydroxide ions are present both in pure water and in all aqueous solutions, and their concentrations are inversely proportional as determined by the ion product of water
Explanation:
Not my work! I hope this helps!
Give reasons: a) Cocoons are boiled in hot water. b) Camel wool considered a natural health product.
Answer:
•cocoons are boiled in hot water for obtaining silk fibres from cocoons.
•camel wool considered a natural health product because it has excellent thermal proities
Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?
A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Answer:
For the wavelenth of light spectrum, I believe the order would be red visible light, infrared, microwaves and radio waves.
What pollutants can contribute to acid precipitation and how are these pollutants generated?
Answer:
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
hope it helps
stay safe healthy and happy...Sulfur dioxide and nitrogen oxides can contribute to acid precipitation.
What are pollutants?A pollutant is a chemical or biological substance which harms water, air, or land quality.
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
Learn more about the pollutants here:
https://brainly.com/question/16101020
#SPJ2
what is the valence electron for magnesium 2+
Answer:
two valence electrons
Explanation:
Magnesium is alkaline earth metal and belongs to group IIA of the periodic table. It has two valence electrons which are present in 3s subshell.
pls Mark me as brainliest trust me
Answer:
Magnesium has two valence electrons.
Explanation:
Magnesium is element 12 and belongs to Group 2 of the Periodic Table. An element in Group 2 has two valence electrons.
Here is a video which discusses how to determine the electron configuration of magnesium.
https://youtu.be/AOxaVdA-Sv0
True or false
If an atom is charged positive, it contains more protons than electrons.
Answer:
TRUE
Explanation: because it is positively charged and protons are positive ions
hat is the molarity of a solution prepared by dissolving 12.0 g of ethylene glycol, C2H6O4, in water to make 250.0 mL of solution
Answer:
0.512 M
Explanation:
We'll begin by calculating the number of mole in 12 g of C₂H₆O₄. This can be obtained as shown below:
Mass of C₂H₆O₄ = 12 g
Molar mass of C₂H₆O₄ = (2×12) + (6×1) + (4×16)
= 24 + 6 + 64
= 94 g/mol
Mole of C₂H₆O₄ =?
Mole = mass /molar mass
Mole of C₂H₆O₄ = 12 / 94
Mole of C₂H₆O₄ = 0.128 mole
Next, we shall convert 250 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
250 mL = 250 mL × 1 L / 1000 mL
250 mL = 0.25 L
Thus, 250 mL is equivalent to 0.25 L.
Finally, we shall determine the molarity of the solution. This can be obtained as follow:
Mole of C₂H₆O₄ = 0.128 mole
Volume = 0.25 L
Molarity =?
Molarity = mole /Volume
Molarity = 0.128 / 0.25
Molarity = 0.512 M
Thus, the molarity of the solution is 0.512 M
Consider the balanced reaction below:
2HBr + Ba(OH)2 → BaBr2 + 2H2O
How many moles of barium
hydroxide, Ba(OH)2, would be
required to react with 117 g hydrogen bromide, HBr?
Answer:
0.723 moles (5 s.f.)
Explanation:
Whenever there is a chemical equation, ensure that it is balanced. This is because a balanced chemical equation tells us the mole ratio (not the ratio of their masses), which means the relationship of the number of moles of reactants or products with one another.
The chemical equation given has already been balanced. Looking at the coefficients of HBr and Ba(OH)₂, the mole ratio of HBr to Ba(OH)₂ is 2: 1.
• 1 mole of Ba(OH)₂ is needed to react with 2 mole of HBr
Find the number of moles of HBr present:
Number of moles= mass ÷mr
Amount of HBr
= 117 ÷(1 +79.9)
= 1.4462 moles (5 s.f.)
Since the amount of Ba(OH)₂ required is half the amount of HBr present,
amount of Ba(OH)₂ required
= 1.4462 ÷2
= 0.723 moles (3 s.f.)
Notes:
• mr
= relative molecular mass
= sum of relative atomic masses (which can be found in the periodic table) in a molecule
WILL GIVE BRAINLIEST!Which statement best describes electrolytic and voltaic cells?
•Electrolytic cells and voltaic cells each carry out spontaneous reactions.
•Electrolytic cells and voltaic cells each carry out nonspontaneous reactions.
•Electrolytic cells carry out spontaneous reactions, but voltaic cells carry out nonspontaneous reactions.
•Electrolytic cells carry out nonspontaneous reactions, but voltaic cells carry out spontaneous reactions
Answer:
the last answer is right.
which hybridization is found in CO2?
6. Sometimes a tire that appears to be fine may be unsafe because: A. There may be perforations too small to see B. The manufacturing date may be incorrect C. Chemical reactions may have deteriorated the rubber
Answer:
C. Chemical reactions may have deteriorated the rubber
Explanation:
A tire ages with time and most of the time this happens due to chemical reactions in the rubber parts. This could happen faster due to heat and sun.
As a tire is deteriorating or aging, a chemical change happens. What happens is that more chemical bonds are going to be produced with time between the molecules. We call this the process of oxidation. This actually bad for the tire, because the rubber would turn out to be stuffs d strong causing the tires thread to separate and also disintegration would occur.
a que llamamos niveles y subniveles de energia?
Answer:
agua
Explanation:
por que estamos en la planeta
How is the relation between the volume and temperature? Explain.
A heat lamp produces____
light.
Answer:
infrared light
Explanation:
The weak base ionization
constant (Kb) for Clois
equal to:
A
B
[CIO-][H30+)
[HOCI]
[HCIO][OH-]
[CIO-]
Answer:
The answer would be [HCIO][OH-]
_________
[CIO-]
Explanation:
So, the answer would be (b).
2. As NH4OH is added to an HCl solution, the pH of the solution
A) increases as the OH- concentration decreases
B ) increases as the OH- concentration increases
C ) decreases as the OH- concentration decreases
D ) decreases as the OH- ion concentration increases
Answer:
c
Explanation:
Nh4OH + HCL ---> NH4Cl + H3O
so ph decreases as H3O increases
and OH also decreases
When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.
Why would the solution increase?NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.
This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.
In conclusion, option B is correct.
Find out more on Bases at https://brainly.com/question/15565260.
if drop a watermelon from the top of one of the tower dorms at CSU, and it takes 3.34 seconds to hit the ground, calculate how tall the building is in meters and then convert into feet.
Answer:
179.5 feet
Explanation:
54.718 m converted to 179.5 feet.
9. During a titration, 50.0 ml of 0.2M NaOH were required to neutralize 50.0ml of H_{3}*P * O_{4} What's the concentration of the H_{3}*P * O_{4} solution?
Answer:
0.067M H3PO4
Explanation:
H3PO4 reacts with NaOH as follows:
H3PO4 + 3NaOH → 3H2O + Na3PO4
Where 1 mole of H3PO4 reacts with 3 moles of NaOH
To solve trhis question we need to find the moles of NaOH required. With the chemical equation we can find the moles of H3PO4 and its concentration as follows:
Moles NaOH:
50.0mL = 0.0500L * (0.20moles /L) = 0.0100 moles NaOH
Moles H3PO4:
0.0100 moles NaOH * (1mol H3PO4 / 3mol NaOH) = 0.00333 moles H3PO4
Concentration:
0.00333 moles H3PO4 / 0.0500L = 0.067M H3PO4
Match the reaction to the type that best describes it.
2HCl → H2 + Cl2
?
Combination
NaF + KBr →
NaBr + KE
?
Decomposition
Mg + MnCl2 →
-Mn + MgCl2
?
Single replacement
2Na + 02 →
Na2O2
?
Double replacement
Answer:
2HCl → H2 + Cl2 = decomposition
NaF + KBr → NaBr + KF = double replacement
Mg + MnCl2 → Mn + MgCl2 = single replacement
2Na + 02 → Na2O2 = combination
Explanation:
A chemical reaction involves the conversion of one or more substances called REACTANTS into other substances called PRODUCTS. There are different types of reactions depending on how it occurs, they include:
- Combination or synthesis reaction is a type of reaction in which two or more elements combine to form a single product. Example is:
2Na + 02 → Na2O2
- Single replacement is a type of reaction where one element is replaced by another in a compound or molecule. Example below shows that Manganese (Mn) is replaced by magnesium (Mg):
Mg + MnCl2 → Mn + MgCl2
- Double replacement is a type of reaction where two elements are replaced by other elements at a time. Example is:
NaF + KBr → NaBr + KF
- Decomposition is a type of reaction in which one molecule or compound is broken down into two or more products. Example is:
2HCl → H2 + Cl2
The carbonyl carbon in a ketone is attacked primarily by the peroxy oxygen bonded to hydrogen as opposed to the peroxy oxygen bonded to carbon because:
Answer:
This is because peroxy oxygen bonded to hydrogen can easily undergo nucleophilic protonation with the carbonyl carbon to form an alcohol
Explanation:
A ketone is a functional group that contains a carbonyl group (carbon-oxygen double bond ( R1R2-C=O).
The carbonyl carbon doubly bonded to the oxygen is electron deficient as a result of difference in electronegativity between carbon and oxygen, hence is susceptible to nucleophilic attacks
R1R2 - C = O
where R1 and R2 are organic substituents.
The peroxy oxygen that is bonded to hydrogen (H -O-O-R) is the electron-rich centre and easily attacks electron-deficient centres like the carbonyl carbon in ketones to form an alcohol.
The bond between the hydrogen attached to the peroxy oxygen is broken and the resultant hydrogen ion undergoes protonation with the oxygen of the carbonyl group to form an alcohol
R1R2 - C = O + H - O-O - R =>
R1R2- CH - OH + R - O-O-R1
