How do the rocks in the mantle move?
A. They do not move.
B. They move in convection currents.
C. They flow like water.
D. They move on top of the crust.

Answers

Answer 1

Answer:

b. they move in convection currents.

Explanation:

i learned this in 4th grade


Related Questions

What the suns mass in scientific notation????

Answers

Explanation:

In scientific notation the Sun's mass is: =1.989 x 10 ^30 kg

Answer:

I think in scientific notation the Sun's mass becomes: M Sun = 1.989 x 10 30 kg. The number above the ten, called the power of ten or exponent, stands for the number of decimal places. If it is positive, as in the mass of the Sun, the decimal places are in front of the decimal point.

I hope this help you!:)

Write down the role played by four digestive juices in digestion and the
organs which secrete them.

Answers

Answer:

Explanation:Digestive juices secreted by various organs such as salivary glands in the mouth, stomach, liver and pancreas help in the process of digestion of food. Saliva secreted by the salivary glands in the mouth aids in the breakdown of starch present in the food to simple sugar

please help urgent have you ever seen the old “Pull the tablecloth out from under the dishes” trick? Use Newton’s 1st Law to explain the following:
a. In this trick, are the dishes “objects in motion,” or “objects at rest?”
b. If the dishes end up staying on the table, was an UNBALANCED FORCE applied to them? How do you know?

Answers

Answer:

I kinda dont remember the 1st law so search it up on

and it should tell u , but if u need any help from the

how do u calculate the kinetic energy of a ball of mass 0.25kg being kicked vertically upwards with a speed of 5m/s​

Answers

Answer:

3.125J

Explanation:

K.E.= 1/2(mass)(velocity)^2

K.E.=1/2(0.25)(5)^2=3.125

give one example where friction is a hindrance. ​

Answers

Answer:

an example of when friction is a hindrance, is if someone with shorts is sliding down a slide. their skin rubbing on the slide will cause friction and will slow them down. another example is if you're dragging a large wooden box across the floor. the wood and the floor interacting cause friction and will make it more difficult to push the box.

Explanation:

hope this helps :D

How is the potential difference same in capacitors arranged in parallel combination?​

Answers

Answer:

Potential difference across capacitors in parallel

Two or more capacitors are said to be connected in parallel if each one of them is connected across the same two points. In a parallel combination of capacitors potential difference across each capacitor is same but each capacitor will store different charge.

If the N pole of a magnet is brought near to an unmagnetized iron, nail, then the nail becomes​

Answers

Answer:

The nail also magnatized .

The spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum. have wavelengths that are longer than normal. have a higher intensity in the red part of the spectrum. have wavelengths that are shorter than normal.

Answers

have a higher intensity in the red part of the spectrum

Because of the Doppler effect, the spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum

Most galaxies' spectra have been redshifted, which means that their spectral lines are now pushed away from their normal or rest wavelengths and towards longer wavelengths. When an object travels away from an observer, the Doppler effect causes the shift phenomenon.

The Big Bang hypothesis and the concept of the expanding universe, show that galaxies are moving away from us, observed from the redshift lines.

The waves' apparent wavelengths shift as a result, changing the color of light waves or the pitch of sound waves.

Hence, because of the Doppler effect, the spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum.

To learn more about the Doppler effect, here:
https://brainly.com/question/28106478

#SPJ6

A and B are 0.200m apart in an electric field. If 800J of work are reuqired to move a 2.00 Columb charge from A to B, what is the electric field stregth?

Answers

Answer:

hello

Explanation:

hello dost timi kasto cha

please help me with this I really need help​

Answers

Answer:

Ask with your Science teacher

Explanation:

i do not know the ans

In----- theory, the actual wishes that are threatening to the dreamers conscious awareness are disguised

Answers

Answer:

Unconscious wish fulfillment

Explanation:

Unconscious wish fulfillment

(In the unconscious wish fulfillment theory, the actual wishes of the dreamer that are threatening to the dreamer's conscious awareness are disguised.)

........................

Answers

Answer:

14°F = 263.15 K

31°F = 272.594 K

71°F = 294.817 K

35°F = 274.817 K

Explanation:

Use the formula 273.15 + ((°F–32)•5)/9

A 45.0 kg student runs at a constant velocity up the incline 6 metres high. If the power output of the student is 1.50 x 103 W, how long does it take the student to run the 9.0 m along the incline?

Answers

Answer:

The time taken is 1.76 s.

Explanation:

mass of student, m = 45 kg

height, h = 6 m

power, P = 1500 W

Power is defined as the rate of doing work.

Work done in moving height is

W = m g h

Let the time is t.

P = m g h / t

1500 = 45 x 9.8 x 6 / t

t = 1.76 s

Which law states that absolute zero cannot be reached?

Answers

Assuming you mean temperature

Answer: The third law of thermodynamics

if you rub a ballon with wool or duster it can charge it negatively where do these extre charge come from?​

Answers

Answer:

The electrons come from the free electrons in wool which contains moisture or other forms of additives that creates impurity centers which causes the wool to be electrically conductive

Explanation:

Wool which is mixed with certain substances, conducts electricity in a manner similar to the wool-water system that give rise to centers of impurities where electrical conduction takes place

The ability to conduct electricity is related to the presence of free electrons on a material. Therefore, when a balloon, which is an insulator, is rubbed with wool, some of the mobile electrons on wool, which is also an insulator without the presence of substances that aid its electrical conductivity, are transferred to the balloon, thereby making the balloon to be negatively charged

Invisible damage to the body resulting from repeating a movement often is a

Answers

Answer: repetitive strain injury


Explanation: The repetitive strain injury (RSI), also known as overuse syndrome, is defined as the invisible damage to the body resulting from repeating a movement. These type of damage can affect the muscles, nerves, ligaments and tendons.

A rat is placed in an environment where the floor gives the rat small electric shocks. The only way to get rid of the shocks is to press a lever in the corner of the box. The rat quickly learns to press the lever. This is an example of

Answers

Pressing a lever in the box's corner is the sole method to get rid of the shocks. The rat picks up pressing the lever quite quickly. This is an illustration of negative reinforcement.

What is negative reinforcement?

The technique of negative reinforcement can be applied to aid in teaching particular actions.

When something unpleasant or uncomfortable is taken away in response to a stimulus, this is known as negative reinforcement.

Target behavior should gradually grow better with the hope that the unpleasant item will go away.

A rat is placed in an environment where the floor gives the rat small electric shocks. The only way to get rid of the shocks is to press a lever in the corner of the box.

The rat quickly learns to press the lever. This is an example of  negative reinforcement

Hence the given condition is an example of negative reinforcement.

To learn more about negative reinforcement refer;

https://brainly.com/question/2488603

#SPJ2

importance of estimation in our lives​

Answers

In real life, estimation is part of our everyday experience. For students, estimating is an important skill. First and foremost, we want students to be able to determine the reasonableness of their answer. Without estimation skills, students aren't able to determine if their answer is within a reasonable range.

A ball of mass 1.0 kg is rolling due west at 30 m/s. A second ball of mass 2.0 kg moving due north at 6.0 m/s collides with the first ball and they stick together. What is the magnitude of the momentum of the two-ball system immediately after collision

Answers

Answer:

the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s

Explanation:

Given;

mass of the first ball, m₁ = 1.0 kg

mass of the second ball, m₂ = 2.0 kg

initial velocity of the first ball, v₁ = 30 m/s due west

initial velocity of the second ball, v₂ = 6 m/s due north

From the principle of conservation of linear momentum;

the total momentum before collision = total momentum after collision

The westward momentum of the first ball, = m₁v₁ = 1 x 30 = 30 kg.m/s

The northward momentum of the second ball = m₂v₂ = 2 x 6 = 12 kg.m/s

The resultant momentum of the two balls;

R² = 30² + 12²

R² = 1044

R = √1044

R = 32.31 kg.m/s

Therefore, the magnitude of the momentum of the two-ball system immediately after collision is 32.31 kg.m/s

Can I answer my own question

Answers

Answer:

Well okay do it what's your question ?

Answer:

yes

Explanation:

help me please i will mark as brainliest

Answers

Answer:

you would be paying $1845.26

Hideki had normal vision for most of his life, but now that he is in his 60s, he has started to have difficulty focusing on near objects. He went to an optometrist, who explained that his vision problem was the result of the lenses in his eyes losing elasticity due to aging. Which condition does Hideki have

Answers

Answer:

He is suffering from hypermetropia.

Explanation:

There are some defects of vision.

Longsightedness of hypermetropia : It is the defect of vision in which the person is not able to see the nearby objects clearly but can see the far off objects clearly. This is due to the elongation of size of eye ball. It is cured by using convex lens of suitable focal length.

Nearsightedness or Myopia : It is the defect of vision in which a person is not able to see the far off objects clearly but can see the nearby objects clearly. It is due to the contraction in the size of eye ball. It is cured by using concave lens of suitable focal length.

So, Hideki is suffering from hypermetropia. So, he should use the convex lens of suitable focal length.  

A variable is a letter that stands in for a number and unit... True or False?

Answers

True it represent two or more numbers

a body starts moving from rest and attains the acceleration of 2 metre square calculate the velocity at the end of 310 minutes and also find the distance traveled by it during that time​

Answers

Answer:

Here, we have

Initial velocity, u = 0 m/s (As starts from rest)

Acceleration, a = 2 m/s².

Time taken, t= 310 min = 310 × 60 = 18600 seconds

To Find,

Final velocity, v and,

Distance covered, s

Formula to be used,

1st and 3rd equation of motion,

v = u + at and v² - u² = 2as

So, putting all the values, we get

V = u + at

v = 0 + 2 x 18600

v = 2 x 18600 → v = 37200 m/s.

Hence, the final velocity is 37200 m/s.

Now, Distance covered,

v² - u²= 2as

(37200 )² - (0)² = 2 x 2 x s

1,383,840,000 = 4s → s = 345,960,000m

Hence, the distance covered is 345,960,000 m.

what is the Ramsar convention?

Answers

The Ramsar Convention on Wetlands of International Importance Especially as Waterfowl Habitat is an international treaty for the conservation and sustainable use of wetlands.

Which of the following best describes reverberation?
A.The wave fronts become mixed and broken up due to contact with a rough or
irregular surface.
B. A change in the sound wave velocity causes the wave to bend in a different
direction.
C. A fraction of the sound waves are absorbed by an object and converted to heat
energy.
D. A single sound undergoes several reflections due to multiple reflecting surfaces.

Answers

Reverberation, in psychoacoustics and acoustics, is a persistence of sound after the sound is produced

Explanation:

I think it is right hope its helps

Answer:

D. A single sound undergoes several reflections due to multiple reflecting surfaces.

Explanation:

Sometimes, the source of a sound is surrounded by multiple reflecting surfaces. The waves traveling from the source strike these different surfaces, causing multiple reflections. For example, a single clap of thunder reflects on several clouds and the earth's surface, causing you to hear a rolling rumble instead of a single sound.

Trong thí nghiệm về sự khúc xạ ánh sáng, một học sinh ghi lại trên tấm bìa ba đường truyền của ánh sáng như hình bên nhưng quên không ghi chiều truyền.



Tia khúc xạ là

Answers

Answer:

I R 2

Explanat

Can ya pls answer dis rq!

Answers

Answer:

Below

Explanation:

Recommended protein sources

1. Lean meat such as chicken or fish

Advantages : they are high quality sources of protein, and contain all 8 essential amino acids, which is why they are considered a complete protein

2. Animal products like eggs and greek yogurt

Advantages : these foods also contain all 8 essential amino acids, making them a complete protein

3. Pulses like beans and lentils

Advantages : tends to be lower in calories and fat than animal-based protein sources, as well as being higher in fiber and essential nutrients

Hope this helps!

is noise energy a kind of energy or not

Answers

yes. sound waves are produced by energy.

pls,help ASAP .the question is in attachment​

Answers

Answer:c

Explanation:

Other Questions
3. How many right angles and parallelogram has The fuel efficiency of a vehicle is 28 miles per gallon and gasoline cost 2.25 per gallon. What is the cost per mile to drive the vehicle? what are the properety of covalent bond Hello :) how to do this? What is the probability of throwing a total score of 10 or less with two dice? What are eight types of energy? Write 2 interesting features of your houses Circle the verbs in these sentences:1. The car stopped in front of the house.2. We went to the movies on Friday after school.3. Our teacher gave us a funny book to read.4. The girls walked in front of the boys.5. The wind blew our hats off of our heads. The final price of the textbook for an English literature course is 13.5% more than the listed price when tax and shipping costs are included. If the listed price is $147, what is the final price of the textbook?(Round to the nearest dollar.) What element in the room does the narrator of "The Yellow Wallpaper" focuson through much of the story?A. The locks on the doorB. The pattern of the wallpaperC. The bars on the windowsD. The damage to the bed Who were the Sepoys and why did they revolt against their leadership in 1857? Please help!!!!CE is tangent to this circle, CD is a radius and ECB=48 what is BAC Point A is located at (0, 4), and point C is located at (3, 5). Find the x value for the point B that is located one-fourth the distance from point A to point C. The mean gross annual incomes of certified welders are normally distributed with the mean of $20,000 and a standard deviation of $2,000. The ship building association wishes to find out whether their welders earn more or less than $20,000 annually. The alternate hypothesis is that the mean is not $20,000.Required:What is the alternate hypothesis? Approximately how many people cross Shibuya crossing per minute?? An electronics company makes communications devices for military contracts. The company just completed two contracts. The navy contract was for 2,540 devices and took 27 workers two weeks (40 hours per week) to complete. The army contract was for 5,940 devices that were produced by 37 workers in three weeks (40 hours per week). a. Calculate the productivity for navy and army contracts in units produced per labor hour. A bullet 2cm log is fired at 420m/s and passes straight a 10cm thick board exiting at 280m/sa) what is the average acceleration of the bullet through the board?b)what is the total time the bullet is in contact with the board?c)what minimum thickness could the board have if it was supposed to bring the bullet to a stop? What is a measure between the difference in start and end positions? 1. Find the volume of the shipping box using the two methods and show your work plzzzzzzzz i neeeeeeeeeeeeeed help [tex]3(x+2)2+4(x+2)+1=0\\[/tex]