Answer:
A Couple in a bicycle is usually generated by the gravitational force and the corresponding reaction forces of the floor. A couple is a force which encourages or prevents a body turning in motion.
The wheels help in the movement and motion of the bicycle from point A to B. The chain which connects different parts help in the rotation of the bicycle wheels through the movement of the pedals by the legs
HELP PLEASE ?? can u answer this multiple choice for me please?
Answer:
.04 kg m/s
Explanation:
Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.
Before the collision, the data given for the toy train:
v = 0.5m/s
m = 75g
We need to convert grams into the SI unit of mass, kg.
75g / 1000g * 1kg = 0.075kg
Using p = mv, we can determine:
p = 0.075kg * 0.5m/s = 0.0375 kg m/s
Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.
A standing wave measures 12 m between its first and fourth node and its frequency 325 Hz. What is the standing wave's speed?
1300 m/s
380 m/s
1500 m/s
750 m/s
Answer:
1300 m/s
Explanation:
Applying,
v = λf/2............... Equation 1
Where v = velocity or speed of wave, f = frequency of wave, λ = wavelength of wave.
From the question,
Given: f = 325 Hz, λ = (12×2/3) = 8 m
Substitute these values into equation 2
v = 325(8)/2
v = 1300 m/s.
Hence the standing wave speed is 1300 m/s
The right option is 1300 m/s
A hot cube of iron was heated up using 1500 J of thermal energy and was placed in a beaker of water. Before it was heated, the iron cube was 20.0 ˚C. The cube of iron raised the temperature of the water to 45.0 ˚C. If the iron cube has a mass of 133 g, what is the specific heat capacity of iron?
Answer:
451.13 J/kg.°C
Explanation:
Applying,
Q = cm(t₂-t₁)............... Equation 1
Where Q = Heat, c = specific heat capacity of iron, m = mass of iron, t₂= Final temperature, t₁ = initial temperature.
Make c the subject of the equation
c = Q/m(t₂-t₁).............. Equation 2
From the question,
Given: Q = 1500 J, m = 133 g = 0.113 kg, t₁ = 20 °C, t₂ = 45 °C
Substitute these values into equation 2
c = 1500/[0.133(45-20)]
c = 1500/(0.133×25)
c = 1500/3.325
c = 451.13 J/kg.°C
Do only number 2 and thank
Answer:
Quantity of charge = 0.8 Coulombs
Explanation:
Given the following data;
Current = 0.4 A
Time = 2 seconds
To find the quantity of electricity transferred;
Mathematically, the quantity of electricity (charge) passing through a conductor is given by the formula;
Quantity of charge = current * time
Substituting into the formula, we have;
Quantity of charge = 0.4 * 2
Quantity of charge = 0.8 Coulombs
An object is placed closer to the lens than f for a diverging lens. The image will be located:
a) between f and 2f
b) between the lens and f
c) A or B or C
d) farther than 2f
What is the product of an object’s mass and velocity equal to?
a. Acceleration
b. Work
c. Power
d. Momentum
Answer:
momentum (d) it's s preety easy haaaaaaaa
A force of 20 N acted on a 5 kg object, moving it a distance of 4 m. How much work was done on the object?
Answer:
400J
Explanation:
The work done by the force on the object is 80 J.
What is work ?The work is defined by the product of force and displacement. Its unit of measurement is joule. And the formula is,
Work = Force ×Displacement
Or mathematically it is W = F.d
In the question given data ,[tex]F = 20N , d = 4m\\[/tex]
putting in the above formula ,W = 20 × 4
W = 80 J
Hence the work done by the force is 80J.
Find out more information about work here:
https://brainly.com/question/11367798
#SPJ2
pleaseeeeeee helppppp this is mah last question... thank u (. ^ ᴗ ^. )
Answer:
44.1 m
Explanation:
Consider the displacement being x:
x = (g•t²)/2
x = (9.8•3²)/2
x = (9.8•9)/2
x = 88.2/2
x = 44.1 m
Answer:
44.1 mExplanation:
that's the correct answer
An electron with a charge of -1.6 x 10-19 C experiences a force of 9.2 x 10-15 N. What is the intensity of the electric field?
Answer:
Explanation:
[tex]E=\frac{q}{F}[/tex] where q is the charge of the electron and F is the electrostatic force. Filling in:
[tex]E=\frac{-1.6*10^{-19}}{9.2*10^{-15}}[/tex] which gives you an electric field magnitude of
E = -1.7 × [tex]10^{-5[/tex] C/N
what revovles around the sun and is made out of rock,ice,gas,and dust?
Answer:
Comets are cosmic snowballs of frozen gases, rock and dust that orbit the Sun. When frozen, they are the size of a small town. When a comet's orbit brings it close to the Sun, it heats up and spews dust and gases into a giant glowing head larger than most planets.Hope this is fine for you,,!!A 1.50 kg ball moving at 4.50 m/s is caught by a 60.0 kg man while the man is standing on ice. How fast will the man / ball combination be moving after the ball is caught by the man?
Answer:
Explanation:
The Law of Momentum Conservation applies, and the formula for us here specific to this problem is:
[tex][(m_bv_b)+(m_mv_m)]_b=[(m_b+m_m)v_{both}]_a[/tex] and filling in:
[(1.50*4.50)+60.0*0)] = [(1.50 + 60.0)v] and
6.75 + 0 = 61.5v so
v = .110 m/s in the same direction as the ball
How to find the total displacement of an object ?
Answer:
it can be calculated by measuring the final distance away from a point, and then subtracting the initial distance
A 5-kg box is pushed with a horizontal force of 100 N across a floor. What power output is neede d to push the box a distance of 60 meters in 2 minutes? (A) 10 W (B) 25 W (C) 30 W (D) 50 W
Answer:
(D) 50 W
Explanation:
Given the following data;
Mass = 5 kg
Force = 100 N
Distance = 60 N
Time = 2 minutes
Conversion:
1 minute = 60 seconds
2 minutes = 60 * 2 = 120 seconds
To find the power output required to push the box;
First of all, we would determine the work done in pushing the box.
Work done = force * distance
Workdone = 100 * 60
Workdone = 6000 Joules
Next, we find power output;
Power = workdone/time
Power = 6000/120
Power = 50 Watts
HELP ME ILL MARK YOU THE BRAINLIEST
Option C: Later in the day, less power is developed in lifting each box
Answer:
Later in the day, less power is developed in lifting each box.
power= workdone÷time
Two examples of chemical reactions that involved a thermal energy change:
1. NH4NO3 (s) + heat ---> NH4+ (aq) + NO3 (aq)
2. CaCl2 (s) + 2H20 ---> Ca(OH)2 (aq) + 2HCl (g) + heat
Which is exothermic? Which is endothermic? How do you know?
Answer:
Option 1 is endothermic
Option 2 is exothermic
Explanation:
In Chemistry, Exothermic reactions are reactions whereby heat energy is transferred to the surroundings and the temperature of the surroundings increases. Endothermic reactions are those whereby heat energy from the surroundings is absorbed and thereby making the temperature of the surroundings to decrease.
This means in simple terms that endothermic reactions will have heat on the reaction side of the equation while exothermic will have heat on the product side of the equation.
Thus;
Option 1 is endothermic since it has heat absorbed on the reactant side.
Option 2 is exothermic since it gives off heat on the product side.
Wire B has twice the length and twice the radius of wire A. both wires are made from the same material. if wire A has a resistance R, what is the resistance of wire B?
Answer:
Hello There!!
Explanation:
1/2R because wire B has twice the radius,it has four times the cross-sectional area of wire A.
hope this helps,have a great day!!
~Pinky~
The velocity of sound in a medium increases with increasing
a. distance
b. amplitude
c. temperature
d. time
c- temperature
The speed of sound increases with increasing temperature .
If a train traveled 400 miles north and traveled back 275 miles south and the total trip took 5 hours to complete, what was the average velocity of the train in mph?
The average velocity is 25 mph north.
Average velocity = displacement/time
Displacement =
(400 mi north) + (275 mi south)
Displacement = 125 mi north
Average V = (125 mi north) / 5 hours.
Average V = 25 mph north
the use of thermostat in a gas cooker is to
Explanation:
An oven thermostat regulates the temperature inside an oven. The thermostat's temperature-sensitive probe measures the oven's warmth, switching the heat on and off as necessary to maintain the correct temperature.
Which one of the following is an example of a solution?
a. Sand particles in water
b. Orange Squash
c. Vinegar
d. Paint
Answer:
it is maybe A but i'm not 100% sure
Explanation:
its the only one that is mixed
Bài 1. Ở nhiệt độ 17°C, có bao nhiêu phần trăm phân tử khí có các vận tốc sai khác
không quá 0,5m/s, các vận tốc sau đây? Lấy g=0,029kg / mol
a. v=v; b. v=0.lv
Answer:
hi i only dont understand want ur saying
goodie morning
—————————
what is nitric acid?
Answer:
Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.
Explanation:
Good morning...
Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.
A spiral spring is compressed by 0.1cm. calculate the elastic potential energy in the spring if the stiffness of the spring is 100Nm^1
Answer:
[tex]E=5\times 10^{-5}\ J[/tex]
Explanation:
Given that,
A spring is compressed by 0.1 cm or 0.001 m
The spring constant of the spring, k = 100 N/m
The elastic potential energy in the spring is given by :
[tex]E=\dfrac{1}{2}kx^2\\\\E=\dfrac{1}{2}\times 100\times 0.001^2\\\\E=5\times 10^{-5}\ J[/tex]
So, the elastic potential energy of the spring is equal to [tex]5\times 10^{-5}\ J[/tex].
The rate at which electric
charges flow through a
circuit
Answer:
The answer is Current.
which is the correct equation for the elastic potential energy stored in a spring
A EPE = mv
B EPE = 1/2kx^2
C EPE = F(delta)t
D EPE = -kx
(B)
Explanation:
[tex]pe = \frac{1}{2} k {x}^{2} [/tex]
The equation of the elastic potential energy stored in the spring can be represented as: EPE = (1/2)kx². Therefore, option (B) is correct.
What is elastic potential energy?The elastic potential energy can be described as the total energy obtained as a result of deformation in the shape of an object. The elastic potential energy implies any object which is capable of regaining its actual shape and size after deformation.
The deformation is only possible as a result of the gained potential energy which is called the elastic potential energy. The elastic potential energy can be stored energy of a compressible or stretchable in other words stored energy of perfectly elastic materials.
The mathematical equation of the elastic potential energy formula is given by:
U = 1/2 (Force × Displacement)
U = (1/2) (kx) (x)
U = (1/2)kx²
Where k is the spring constant and x is the displacement as a result of applied external force.
Learn more about elastic potential energy, here:
https://brainly.com/question/14687790
#SPJ2
A mass hanging from a pendulum at the end of a string of negligible mass. The string has a length of 0.84 m. With the string hanging vertically, the object is given an initial velocity of 1.4 m/s parallel to the ground and swings upward on a circular arc. Eventually, the object comes to a momentary halt at a point where the string makes an angle θ with its initial vertical orientation and then swings back downward. Find the angle θ.
Explanation:
tan(theta)=(v^2)/(length of string × g)
=(1.4^2)/(0.84 × 9.8m/s )
=1.96/(8.232)
=0.2380952381
theta=arctan(0.2380952381)
=13.4°
for an ideal monoatomic gas, the internal energy U os due to the kinetic energy and U=3/2RT per mole.show that cv=3/2R per mole and Cp=5/2RPer mole
Answer:
i. Cv =3R/2
ii. Cp = 5R/2
Explanation:
i. Cv = Molar heat capacity at constant volume
Since the internal energy of the ideal monoatomic gas is U = 3/2RT and Cv = dU/dT
Differentiating U with respect to T, we have
= d(3/2RT)/dT
= 3R/2
ii. Cp - Molar heat capacity at constant pressure
Cp = Cv + R
substituting Cv into the equation, we have
Cp = 3R/2 + R
taking L.C.M
Cp = (3R + 2R)/2
Cp = 5R/2
When should a bar graph be used?
A. When the independent variable is composed of categories and does not show a
relationship
B. When the independent variable is continuous and does not show a relationship to the
dependent variable.
C. When the independent variable is continuous and shows a causal link to the
dependent variable,
D. When there is no independent variable.
Answer:
B. When the independent variable composed of categories and does not show a relationship to the dependent variable
Explanation:
A bar graph, is a graph used for presenting data grouped into categories, which are the independent variables of the graph, and the measurement of each category, which are represented as rectangular bars having lengths proportional to the value of the category, on a chart
In the bar graph or chart, there is no direct relationship between the categories, which are the x-values and the dependent variables , which are the length of the bars, the y-values, as the length of the rectangular bar in one category, cannot be obtained from another category through a relationship
Therefore, the correct option is option is when the independent variable composed of categories and does not show a relationship to the dependent variable
Let's say that the teacher raised the lawn bowling ball to a height of 1.6 meters before they released it . THE LAWN BOWLING BALL HAS A MASS OF 4KG . Remember that " g " ALWAYS equals 9.8 m / s² . Calculate the gravitational potential energy of the lawn bowling ball at this position
ya ok do ok bro al ya al ya la ya al
Which statement about the mass and the weight of an object is correct?
A They are both affected by changes in the acceleration of free fall.
B They are both forces.
C They have different units.
D Weight is calculated by dividing mass by the acceleration of free fall.
Answer:
HOPE IT HEPLED U !!!!
Explanation:
i think it's (C) They have different units ....
