How are the boiling point and freezing point of a solvent affected when a solute is added?
Both the boiling point and the freezing point decrease.
Both the boiling point and the freezing point increase.
The boiling point increases, and the freezing point decreases.
The boiling point decreases, and the freezing point increases.

Answer: 22.7848% F or 23%

Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F

The percentage composition of hydrogen in the given sample is equal to 31%.

The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.

The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.

The percentage composition is expressed using the following formula,

Percentage composition of E = (E/T) × 100

Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.

Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.

The total mass of the given sample = 15.8 g

The mass of the hydrogen in the sample = 4.90 g

The percent composition of H = (4.90/15.8) × 100 = 31 %

Therefore, the percent composition of hydrogen in this sample is 31%.

Learn more about percent composition, here:

https://brainly.com/question/11952337

#SPJ2

Answer:

Liquid

Explanation:

Quite an easy question!

Answer:

Liquid

Explanation:

I was passing by lol

Answer:

Inference

Explanation:

A conclusion reached on the basis of evidence and reasoning is called an inference.

Answer

Tq so much.

Pls follow me and Mark as brainliest Plsssssssss

Answer:

Thank you so much.

Answer: Among the listed substances [tex]XeCl_{4}[/tex] is the molecular compound.

Explanation:

A chemical compound formed by the chemical combination of two or more non-metals is called a molecular compound or covalent compound.

For example, Xe and Cl are non-metals. The compound formed by them is [tex]XeCl_{4}[/tex] which is a molecular compound.

A molecular compound is formed by sharing of atoms between the combining atoms.

Whereas NaF, [tex]MnCl_{2}[/tex] and CaO are all ionic compounds as they are formed by chemical combination of a metal and a non-metal.

Thus, we can conclude that among the listed substances [tex]XeCl_{4}[/tex] is the molecular compound.

Answer:

A chemical bond formed when two atoms share two pairs of electrons is a double bond; it is best described as a covalent bond.

Explanation:

A chemical bond in which two pairs of electrons are shared has to be defined as covalent since ionic bonds don't involve electron sharing. They consist only of electrostatic attraction between ions.

Answer : Metal containers are not used for storing acid because most of the time acid reacts with almost every metal and produces salts or oxides which alters the acid characteristics making it useless .......

9. melting point

10. balloons float because they are filled with hydrogen, a gas which is less dense than air.

11. specific gravity

12. element

13. mixture

14. sodium and chlorine

15. cutting of paper

16. condensation

17. 1 and 3

18. heat energy is released

Explanation:

[tex][{H}^{ + }] = {10}^{ - pH} [/tex]

[tex] = {10}^{ - 11.13} [/tex]

[tex] = {10}^{ (- 11 - 0.13)} [/tex]

[tex] = {10}^{ - 0.13} \times {10}^{ - 11} [/tex]

[tex] = 0.741 \times {10}^{ - 11} \frac{mol}{litre} [/tex]

Answer:

Wavelength = 0.049 m

Explanation:

Given that,

The frequency of a wave,[tex]f=6.1\times 10^9\ Hz[/tex]

We need to find the wavelength of the wave. We know that,

[tex]c=f\lambda\\\\\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{2.998 \times 10^8}{6.1\times 10^9}\\\\\lambda=0.049\ m[/tex]

So, the wavelength of the wave is 0.049 m.

Answer:

A beam balance is an example of a first class lever.

Explanation:

A beam balance is an example of a first class lever. In a first class lever, the fulcrum is between the effort (force) and the load. The effort (force) moves over a large distance to move the load a smaller distance.

Other examples of first class lever are pliers, scissors, a crow bar, a claw hammer, a see-saw and a weighing balance etc.

Answer:

volcanic eruption caused by plate tectonics.

Explanation:

Constructive process is one in which memories are influenced by some events. When a person tries to retrieve the memory he first click some event which is associated with that memory and then whole flash backs comes to his mind.

Answer:

b, d, e

Explanation:

An atom is made up of electrons, protons and neutrons. Gold is an atom thus has the above particles.

Answer:

0.025M

Explanation:

As you must see in your graph, each concentration of the experiment has an absorbance. Following the Beer-Lambert's law that states "The absorbance of a solution is directely proportional to its concentration".

At 0.35 of absorbance, the plot has a concentration of:

Answer:

See explanation

Explanation:

According to Fajan's rules, the degree of covalent character of a bond depends on the relative polarizing power of ions.

Generally, ions become more polarizing when they are small and highly charged. Large negative ions are more polarizable than small ones.

A very small positive charge concentrated on a small area such as in Fe^2+ makes the ion highly polarizing. Also, a large negative ion such as S^2- is highly polarizable.

As a result of these FeS has considerable covalent character hence we can not simply write the formula of the ionic compound that forms between Fe and S?

Answer:

the S.I unit

Explanation:

is the best unite

Answer:

theory

Explanation:

if you assume something that you didn't see occuring it is called a theory

Answer:

This reaction is exothermic because the system shifted to the left on heating.

Explanation:

2NO₂ (g) ⇌ N₂O₄(g)

Reactant => NO₂ (dark brown in color)

Product => N₂O₄ (colorless)

From the question given above, we were told that when the reaction at equilibrium was moved from room temperature to a higher temperature, the mixture turned dark brown in color.

This simply means that the reaction does not like heat. Hence the reaction is exothermic reaction.

Also, we can see that when the temperature was increased, the reaction turned dark brown in color indicating that the increase in the temperature favors the backward reaction (i.e the equilibrium shift to the left) as NO₂ which is the reactant is dark brown in color. This again indicates that the reaction is exothermic because an increase in the temperature of an exothermic reaction will shift the equilibrium position to the left.

Therefore, we can conclude that:

The reaction is exothermic because the system shifted to the left on heating.

The reaction is exothermic and the equilibrium position shifted to the left hand side.

An exothermic reaction is one in which heat is given out. Hence, the equilibrium position moves towards the left when the temperature is increased in an exothermic reaction.

Given the reaction, 2NO2(g) ⇌ N2O4(g) the appearance of a dark brown gas at high temperature implies that the reaction is exothermic and the equilibrium position shifted to the left hand side.

Learn more about exothermic reaction: https://brainly.com/question/15308590

Answer:

Explanation:The equation for this is F = -GmM/R^2 where the minus sign says the force is attractive m is 10 kg, M is 20 kg and R is 5 meters. If you crunch the numbers you get an answer of:

Answer:

The answer is A

Explanation:

hope it helps

Answer:

positive force → balanced force → negative force

Explanation:

np

Answer:

positive force → balanced force → negative force

Explanation:

:)))

I ANSWERED IT BUT SOMEONE SYAYS ITS COPY SO WHAT COULD I DO ;(

Answer:

hope it is helpful to you

Answer:

Explanation:

Indira point is the southern most point of India and is situated on great nicobar island in the nicobar island.

Answer:

Your Ans Is

(A) Indra point.

Answer:

3.90g/mL

Explanation:

To find the density of a substance, divide the mass by the volume.

So, 37.6 / 9.65 = 3.89637

then round to 3 significant figures

Good luck!

8g + 65g = 73g

24g + 38g = 62g

Answer:

1)Na + O2 = > 2NaO

8 g + 65 g = > 73g

2) 2H2 + O2 → 2H2O

24 g + 38g→ 62 g

Answer:

it adds to scientific knowledge