High school students across the nation compete in a financial capability challenge each year by taking a nation financial capability challenge exam(URGENT)

Answer:

Step-by-step explanation:

We can start by assuming that the relationship between the ticket price and attendance is linear, so we can write the equation for the line that connects the two data points we have:

Point 1: (9, 23000)

Point 2: (7, 30000)

The slope of the line can be calculated as:

slope = (y2 - y1) / (x2 - x1)

slope = (30000 - 23000) / (7 - 9)

slope = 3500

So the equation for the line is:

y - y1 = m(x - x1)

y - 23000 = 3500(x - 9)

y = 3500x - 28700

Now we can use this equation to find the attendance for any ticket price. To maximize revenue, we need to find the ticket price that generates the highest revenue. Revenue is simply the product of attendance and ticket price:

R = P*A

R = P(3500P - 28700)

R = 3500P^2 - 28700P

To find the ticket price that maximizes revenue, we need to take the derivative of the revenue equation and set it equal to zero:

dR/dP = 7000P - 28700 = 0

7000P = 28700

P = 4.10

So the ticket price that would maximize revenue is $4.10. However, we need to make sure that this price is within a reasonable range, so we should check that the attendance at this price is between 23,000 and 30,000:

A = 3500(4.10) - 28700

A = 5730

Since 23,000 < 5,730 < 30,000, we can conclude that the ticket price that would maximize revenue is $4.10.

Step-by-step explanation:

a probability is always the ratio

desired cases / totally possible cases

(a)

the experimental probability is just using the actual experience to predict any future results.

the total number of cases was 20, and the number of desired cases (yellow) was 12.

so, the experimental probability of landing on yellow is

12/20 = 3/5 = 0.600

(b)

the theoretical probability of a totally fair spinner landing on yellow is 2 out of 5 possibilities, so

2/5 = 0.4000

(c)

the correct statement is the first one.

with a more or less balanced (fair) spinner the experimental numbers should get closer and closer to the theoretical numbers, the more spins we make.

To obtain the required equation we divide the equation by sin²Ø.

The first six functions are trigonometric, with the domain value being the angle of a right triangle and the range being a number. The angle, expressed in degrees or radians, serves as the domain and the range of the trigonometric function (sometimes known as the "trig function") of f(x) = sin. Like with all other functions, we have the domain and range. In calculus, geometry, and algebra, trigonometric functions are often utilised.

The given equation is:

sin²Ø+cos²Ø=1

To obtain the required equation we divide the equation with sin²Ø:

sin²Ø/sin²Ø +cos²Ø/ sin²Ø = 1/sin²Ø

1 + cot²Ø = csc²Ø

Hence, to obtain the required equation we divide the equation by sin²Ø.

Learn more about trigonometric functions here:

https://brainly.com/question/6904750

#SPJ1

Answer:

y=9/x  => proportional

y = x - 12 ==> non-proportional

h = 3d ==> proportional

f = 1/3 e = proportional

Step-by-step explanation:

A proportional equation is of the general form

y = kx (directly proportional) or

y = k/x  (inversely proportional)

k is known as the constant of proportionality

y = 9/x ==> k = 9  proportional
y = x - 12  cannot be expressed as y = kx or y = k/x

h = 3d ==> k = 3  proportional

f = 1/3 e ==> k = 1/3   proportional

The matrix A of the linear transformation T(M) with respect to the standard basis for U2×2 is given by:

T([1000]) = [8 0]

[0 0]

T([0010]) = [0 0]

[0 9]

T([0001]) = [0 1]

[0 0]

To find the matrix A of the linear transformation T(M), we need to apply T to each basis vector of U2×2 and express the result as a linear combination of the basis vectors for U2×2. We can then arrange the coefficients of each linear combination as the columns of the matrix A.

Let's begin by finding T([1000]). We have:

T([1000]) = [8097][1000][8097]^-1

= [8 0]

[0 0]

To express this result as a linear combination of the basis vectors for U2×2, we need to solve for the coefficients c1, c2, and c3 such that:

[8 0] = c1[1000] + c2[0010] + c3[0001]

Equating the entries on both sides, we get:

c1 = 8

c2 = 0

c3 = 0

Therefore, the first column of the matrix A is [8 0 0]^T.

Next, we find T([0010]). We have:

T([0010]) = [8097][0010][8097]^-1

= [0 0]

[0 9]

Expressing this as a linear combination of the basis vectors for U2×2, we get:

[0 0] = c1[1000] + c2[0010] + c3[0001]

Equating the entries on both sides, we get:

c1 = 0

c2 = 0

c3 = 0

Therefore, the second column of the matrix A is [0 0 0]^T.

Finally, we find T([0001]). We have:

T([0001]) = [8097][0001][8097]^-1

= [0 1]

[0 0]

Expressing this as a linear combination of the basis vectors for U2×2, we get:

[0 1] = c1[1000] + c2[0010] + c3[0001]

Equating the entries on both sides, we get:

c1 = 0

c2 = 1

c3 = 0

Therefore, the third column of the matrix A is [0 1 0]^T.

Putting all of this together, we have:

A = [8 0 0]

[0 0 1]

[0 0 0]

Therefore, the matrix A of the linear transformation T(M) is:

T([1000]) = [8 0]

[0 0]

T([0010]) = [0 0]

[0 9]

T([0001]) = [0 1]

[0 0]

To know more about linear transformation:

https://brainly.com/question/30514241

#SPJ4

(a) Therefore after t = 1.75 seconds the diver will hit the water.

(b) The velocity the diver hit the water is 56 ft/s.

From the given condition we have d(t) = 16t²

and the height is 49ft

(a) Now when the diver hit the water the equation become

16t² = 49

t² = 49/16

t = ±7/4

t = ±1.75

since time can not be negative so t = 1.75

Therefore after t = 1.75 seconds the diver will hit the water.

(b)

Now differentiating d(t) with respect to t we get

d'(t) = 32t

now putting t=7/4 we get

the velocity d'(7/4) = 32*7/4

d'(7/4) = 56ft/s

Therefore the velocity the diver hit the water is 56 ft/s.

To learn more about differentiation link is here:

brainly.com/question/14496325

#SPJ4

The complete question is :

A cliff diver plunges from a height of 49ft above the water surface. The distance the diver falls in t seconds is given by the function d(t)=16t²ft

(a) After how many seconds will the diver hit the water?

(b) With what velocity (in ft/s ) does the diver hit the water?

The bases for the row space and null space of A, we put A into reduced row echelon form and solve for the null space. The dot product of basis vectors shows they are orthogonal.

To find the bases for the row space and null space of A, we perform row operations on A until it is in reduced row echelon form:

[ 1 -1  3 |  5 ]    [ 1 -1  3 |  5 ]

[ 2  1 -5 | -9 ] -> [ 0  3 -11 | -19]

[-1 -1  2 |  2 ]    [ 0  0  0  |  0 ]

[ 1  1 -1 | -1 ]    [ 0  0  0  |  0 ]

The reduced row echelon form of A tells us that there are two pivot columns, corresponding to the first and second columns of A. The third and fourth columns are free variables. Therefore, a basis for the row space of A is given by the first two rows of the reduced row echelon form of A:

[ 1 -1  3 |  5 ]

[ 0  3 -11 | -19]

To find a basis for the null space of A, we solve the system Ax = 0. Since the third and fourth columns of A are free variables, we can express the solution in terms of those variables. Setting s = column 3 and t = column 4, we have:

x1 - x2 + 3x3 + 5x4 = 0

2x1 + x2 - 5x3 - 9x4 = 0

-x1 - x2 + 2x3 + 2x4 = 0

x1 + x2 - x3 - x4 = 0

Solving for x1, x2, x3, and x4 in terms of s and t, we get:

x1 = -3s - 5t

x2 = s + 2t

x3 = s

x4 = t

Therefore, a basis for the null space of A is given by the vectors:

[-3  1  1  0]

[ 5  2  0  1]

To verify that every vector in the row space of A is orthogonal to every vector in the null space of A, we compute the dot product of each basis vector for the row space with each basis vector for the null space:

[ 1 -1  3 |  5 ] dot [-3  1  1  0] = 0

[ 1 -1  3 |  5 ] dot [ 5  2  0  1] = 0

[ 0  3 -11 | -19] dot [-3  1  1  0] = 0

[ 0  3 -11 | -19] dot [ 5  2  0  1] = 0

Since all dot products are equal to zero, we have verified that every vector in the row space of A is orthogonal to every vector in the null space of A.

To know more about orthogonal to vector:

https://brainly.com/question/28503609

#SPJ4

_____The given question is incomplete, the complete question is given below:

in excercises 7 and 8 find bases for the row space and null space of a. verify that every vector in the row(a) is orthogonal to every vector in null(a). a = [ 1 -1 3   5 2 1   0 1 -2   -1 -1 1]

The value for mean, variance, and standard deviation for the given set of data is 63.22, 794.04, and 28.17, respectively.

The method to calculate the various operations are:

Mean:

= (79 + 52 + 64 + 99 + 75 + 48 + 52 + 24 + 76) / 9 = 63.22

Mean is a measure of central tendency found by adding all the observations and dividing the result by the number of frequency or the total number of data set values.

Variance:

= ((79 - 63.22)² + (52 - 63.22)² + (64 - 63.22)² + (99 - 63.22)² + (75 - 63.22)² + (48 - 63.22)² + (52 - 63.22)² + (24 - 63.22)² + (76 - 63.22)² / (9-1) = 794.04

(Here, 63.22 is the mean calculated earlier)

Standard deviation:

= √(Variance)

=√(794.04) = 28.17

To know more about mean and variance, refer:

https://brainly.com/question/1831755

#SPJ4

Complete question is:

For each of the given sample data sets below, calculate the mean, variance, and standard deviation. (a) 79, 52, 64, 99, 75, 48, 52, 24, 76 mean =_______

variance = __________

standard deviation =_________

Answer:2

Step-by-step explanation:

Answer:

2 Tons

Step-by-step explanation:

Homer’s car weighs 2 tons because there are 2,000 pounds in a ton and 4,000 divided by 2,000 equals 2

Rhiannon arrived home approximately 17 minutes earlier than Alexander.

This is the arithmetic mean and is calculated by adding a group of numbers and then dividing by the count of those numbers. For example, the average of 2, 3, 3, 5, 7, and 10 is 30 divided by 6, which is 5.

To solve this problem, we can use the formula:

time = distance / speed

a) The time it took Alexander to get home is:

time_Alexander = 14 km / 20 km/h = 0.7 hours

The time it took Rhiannon to get home is:

time_Rhiannon = 10 km / 24 km/h = 0.41667 hours

Since Rhiannon's time is smaller than Alexander's, Rhiannon arrived home earlier.

b) The time difference between their arrivals is:

time_difference = time_Alexander - time_Rhiannon = 0.7 hours - 0.41667 hours = 0.28333 hours

To convert this to minutes, we can multiply by 60:

time_difference_in_minutes = 0.28333 hours x 60 minutes/hour ≈ 17 minutes

Therefore, Rhiannon arrived home approximately 17 minutes earlier than Alexander.

To learn more about the average visit:

https://brainly.com/question/20118982

#SPJ1

Answer:

5 as a percentage of 100 is 5/100 which is 5%

Answer:

area of semi circle =pi r^2/2

3.14*6*6/2=56.2

area of rectangle=lb

=20*12=240

240+56.2=296.2

rounding it it will become 300 ft sqr

perimeter of rectangle without including 4th side=20+12+20=52

perimeter of semicircle=pi r+d (d is not needed here)

3.14*6=18.84

so total perimeter=52+18.84=70.84ft

Step-by-step explanation:

A replacement value is a value that can be substituted for a variable in an equation or expression in order to solve for that variable or simplify the expression.

An expression is a combination of numbers, variables, and/or operators that represents a mathematical relationship or calculation. An expression can be as simple as a single number or variable, or it can be more complex and involve multiple operations and variables.

A variable is a symbol or letter that represents a quantity or value that can change or vary in different contexts.

In the given question,

A replacement value is a value that can be substituted for a variable in an equation or expression in order to solve for that variable or simplify the expression.

For example, suppose you have the equation 2x + 3 = 7, and you want to solve for x.

To do so, you can use a replacement value.

You can subtract 3 from both sides of the equation to isolate the term with x, which gives you:

2x = 4

Now, you can divide both sides of the equation by 2 to solve for x:

x = 2

In this case, the replacement value was the number 2, which was substituted for the variable x in the equation in order to solve for x.

To know more about replacement value , visit:

https://brainly.com/question/28610686

#SPJ1

According to the given information, the equation of the ellipse is [tex](x+8)^2/256 + (y+1)^2/784 = 1.[/tex]

Coordinate geometry, also known as analytic geometry, is a branch of mathematics that deals with the study of geometric shapes using algebraic principles. It involves the use of coordinates to represent points, lines, curves, and other geometric figures on a plane or in space.

we need to know the coordinates of its foci, co-vertices, and the center. We can start by finding the center of the ellipse, which is the midpoint of the line segment joining the foci:

Center = ( (-8 + (-8))/2 , (14 + (-16))/2 ) = (-8,-1)

Next, we can find the distance between the foci, which is given by:

[tex]distance between foci = 2c = sqrt[(14 - (-16))^2 + (-8 - (-8))^2] = 30[/tex]

where c is the distance from the center to either focus.

We also know that the distance between the co-vertices is given by:

distance between co-vertices = 2a = |-16 - 0| = 16

where a is the distance from the center to either co-vertex.

Finally, we can use the standard form equation for an ellipse centered at the origin:

[tex](x^2/a^2) + (y^2/b^2) = 1[/tex]

where b is the distance from the center to either vertex.

To find b, we can use the Pythagorean theorem:

[tex]b^2 = c^2 - a^2 \\b^2 = 30^2 - 16^2\\b^2 = 784\\b = 28[/tex]

Now we have all the information we need to write the equation of the ellipse:

[tex](x+8)^2/16^2 + (y+1)^2/28^2 = 1[/tex]

Therefore, according to the given information, the equation of the ellipse is [tex](x+8)^2/256 + (y+1)^2/784 = 1.[/tex]

To find more about co-ordinate geometry visit :

https://brainly.com/question/18269861

#SPJ1

Since the p-value (0.0803) exceeds the significance threshold (0.05), the null hypothesis cannot be ruled out.

The mean in mathematics is a measurement of a collection of numerical data's central tendency. It is determined by adding up all of the values in the set and dividing the result by the total number of values. This value is frequently referred to as the average value. The mean (or mathematical mean) is calculated as follows: (Sum of Values) / Mean (number of values)

given

The null hypothesis states that the mean number of units generated during the day and night shifts is the same. The contrary hypothesis (Ha) states that more units are created on average on the night shift than on the day shift.

"day" + "night"

Bravo! Night precedes day.

b. The following method can be used to calculate the test statistic:

t = sqrt(1/n night + 1/n day) * sqrt(x night - x day)

where s p is the pooled standard deviation and x night and x day are the sample averages, n night and n day are the sample sizes, and s p is represented by:

Sqrt(((n night - 1)*s night2 + (n day - 1)*s day2) / (n night + n day - 2)) yields the value s p.

S p is equal to sqrt(((74 - 1)*35 + (68 - 1)*28) / (74 + 68 - 2)), which equals 31.88.

t = (358 - 352) / (31.88 * sqrt(1/74 + 1/68)) = 1.19

1.19 is the test result.

the p-value is 0.0803 as a result (rounded to 4 decimal places).

Since the p-value (0.0803) exceeds the significance threshold (0.05), the null hypothesis cannot be ruled out.

To know more about mean visit:

https://brainly.com/question/30094057

#SPJ1

The complete question is :- Clark Heter is an industrial engineer at Lyons Products. He would like to determine whether there are more units produced on the night shift than on the day shift. The mean number of units produced by a sample of 68 day-shift workers was 352. The mean number of units produced by a sample of 74 night-shift workers was 358. Assume the population standard deviation of the number of units produced is 28 on the day shift and 35 on the night shift.

Using the 0.05 significance level, is the number of units produced on the night shift larger?

a. State the null and alternate hypotheses.

O : Day/Night: H:

Day Night

b. Compute the test statistic. (Negative values should be indicated by a minus sign. Round your answers to 2 decimal places.)

c. Compute the p-value. (Round your answer to 4 decimal places.) p-value

Here is the stem and leaf plot:

5  4

6   0, 1, 2, 2

7    1, 2, 4, 6, 8

8    2, 3, 4,  6, 7,

9   0, 2, 5, 5, 9

The range is 45.

A stem-and-leaf plot is a table that is used to display a dataset. A stem-and-leaf plot divides a number into a stem and a leaf. The stem is the tens digit and the leaf is the units digit. For example, in the number 54, 5 is the stem and 4 is the leaf.

Range is used to measure the variation of a dataset by finding the difference between the highest number and the lowest number.

Range = highest value - lowest value

99 - 54 = 45

To learn more about range, please check: https://brainly.com/question/12372689

#SPJ1

Answer:

Acquired resources

Step-by-step explanation:

Acquired resources

Answer:

I'm pretty confident that the answer is E

The area of this triangle is 30 m².

Area is a surface measure, that is, it is the amount of space that a geometric figure occupies on a flat surface.

To calculate the area of a triangle, we can use the formula:

Area = (base x height) / 2

In the case of the given triangle, we can choose the measure of 5m as the base and the measure of 12m as the height, since the height forms a right angle with the base and is perpendicular to it.

So, we have:

Area = (b*h)/2

Area = (5m * 12m) / 2

Area = 30m²

Set of sophomores taking discrete math = A ∩ B. Set of sophomores not taking discrete math = A - B or A ∩ B^c. Set of students who are sophomores or in discrete math = A ∪ B. Set of students who are not sophomores or not in discrete math = (A ∩ B)^c or A ∪ B^c.

The set of sophomores taking discrete math at your school is the intersection of the set of sophomores A and the set of students in discrete math B. So, it can be expressed as A ∩ B.

The set of sophomores at your school who are not taking discrete math is the difference between the set of sophomores A and the set of students in discrete math B. So, it can be expressed as A - B or A ∩ B^c, where B^c is the complement of B (i.e., the set of students who are not in discrete math).

The set of students at your school who either are sophomores or are taking discrete math is the union of the set of sophomores A and the set of students in discrete math B. So, it can be expressed as A ∪ B.

The set of students at your school who either are not sophomores or are not taking discrete math is the complement of the intersection of the set of sophomores A and the set of students in discrete math B.

This can be expressed as (A ∩ B)^c or as A ∪ B^c, where B^c is the complement of B (i.e., the set of students who are not in discrete math). Note that this set includes all students who are either juniors, seniors, or not enrolled in discrete math.

To know more about discrete math:

https://brainly.com/question/30461754

#SPJ4

The midpoint of a line or arc can be found using straight edge-compass-construction method by drawing two perpendicular bisectors. The intersection of these bisectors is the midpoint.

To find the midpoint of a line segment, first draw a straight line passing through both endpoints of the segment using a straight edge. Then, using a compass, draw two circles with the same radius centered at each endpoint of the line segment. The circles should intersect at two points. Draw straight lines connecting these two points to form two perpendicular bisectors of the line segment. The intersection of these bisectors is the midpoint of the line segment.

To find the midpoint of an arc, first draw a chord that intersects the arc at two points using a straight edge. Then, using a compass, draw two circles with the same radius centered at each endpoint of the chord. The circles should intersect at two points. Draw straight lines connecting these two points to form two perpendicular bisectors of the chord. The intersection of these bisectors is the center of the circle that the arc belongs to. Draw a line from the center of the circle to the midpoint of the chord. This line will intersect the arc at its midpoint.

To know more on perpendicular bisectors

https://brainly.com/question/24753075

#SPJ4

--The question is incomplete, answering to the question below--

"find the midpoint of a line and arc using straight edge-compass-construction method"

if we make quarterly deposits and invest them at an nominal annual interest rate of 8% compounded quarterly for 40 years, we will have $143,004.54 at the end of the 40 years.

The first step in solving this problem is to calculate the amount of each quarterly deposit. We know that the first deposit is $400, and each subsequent deposit decreases by 1% from the previous deposit. This means that each deposit is 99% of the previous deposit. To calculate the size of each deposit, we can use the following formula:

deposit_ n = deposit_(n-1) * 0.99

Using this formula, we can calculate the size of each quarterly deposit as follows:

deposit_1 = $400

deposit_2 = deposit_1 * 0.99 = $396.00

deposit_3 = deposit_2 * 0.99 = $392.04

deposit_4 = deposit_3 * 0.99 = $388.12

...

We can continue this pattern for 40 years (160 quarters) to find the size of each quarterly deposit.

Next, we need to calculate the future value of these deposits using an nominal annual interest rate of 8% compounded quarterly. We can use the formula for compound interest to calculate the future value:

[tex]FV = PV * (1 + r/n)^(n*t)[/tex]

where FV is the future value, PV is the present value (which is zero since we are starting with deposits), r is the nominal annual interest rate (8%), n is the number of times the interest is compounded per year (4 since we are compounding quarterly), and t is the number of years (40).

We can substitute the values into the formula and solve for FV:

[tex]FV = $400 * (1 + 0.08/4)^(440) + $396.00 * (1 + 0.08/4)^(439) + $392.04 * (1 + 0.08/4)^(4*38) + ... + $1.64 * (1 + 0.08/4)^4[/tex]

After solving this equation, we get a future value of $143,004.54, rounded to two decimal places. This means that if we make quarterly deposits and invest them at an nominal annual interest rate of 8% compounded quarterly for 40 years, we will have $143,004.54 at the end of the 40 years.

This calculation highlights the power of compound interest over long periods of time. By making regular contributions and earning interest on those contributions, our investment grows exponentially over time. It also shows the importance of starting early and consistently contributing to an investment over time in order to achieve long-term financial goals.

To know more about quarterly deposit.  click here:

brainly.com/question/17218467

#SPJ4

Answer:

-4(x - 5) + 8x = 9x - 3

Simplifying the left side:

-4x + 20 + 8x = 9x - 3

4x + 20 = 9x - 3

Subtracting 4x from both sides:

20 = 5x - 3

Adding 3 to both sides:

23 = 5x

Dividing both sides by 5:

x = 23/5

Therefore, the equation equivalent to the given equation is:

5x - 23 = 0

(a) The area under the standard normal curve to the left of 1.73 is 0.9582.

(b) The area under the standard normal curve to the left of -0.69 is 0.2454.

(c) The area under the standard normal curve to the right of 1.3 is 0.0968.

(d) The area under the standard normal curve to the right of -2.82 is 0.9974.

(e) The area under the standard normal curve between -2.22 and 0.52 is 0.6851.

(f) The area under the standard normal curve between -1 and 1 is 0.6826.

(g) The area under the standard normal curve between -4 and 4 is 0.9998.

(a) Using a standard normal table, the area under the standard normal curve to the left of 1.73 is 0.9582.

(b) Similarly, the area under the standard normal curve to the left of -0.69 is 0.2454.

(c) The area to the right of 1.3 is the same as the area to the left of -1.3. Using a standard normal table, this area is 0.0968.

(d) The area to the right of -2.82 is the same as the area to the left of 2.82. Using a standard normal table, this area is 0.9974.

(e) To find the area under the standard normal curve between -2.22 and 0.52, we need to find the area to the left of 0.52 and subtract the area to the left of -2.22. Using a standard normal table, we find that the area to the left of 0.52 is 0.6990 and the area to the left of -2.22 is 0.0139. Therefore, the area between -2.22 and 0.52 is 0.6990 - 0.0139 = 0.6851.

(f) To find the area under the standard normal curve between -1 and 1, we need to find the area to the left of 1 and subtract the area to the left of -1. Using a standard normal table, we find that the area to the left of 1 is 0.8413 and the area to the left of -1 is 0.1587. Therefore, the area between -1 and 1 is 0.8413 - 0.1587 = 0.6826.

(g) The area under the standard normal curve between -4 and 4 is the same as the area to the left of 4 minus the area to the left of -4. Using a standard normal table, we find that the area to the left of 4 is 0.9999 and the area to the left of -4 is 0.0001. Therefore, the area between -4 and 4 is 0.9999 - 0.0001 = 0.9998.

Learn more about standard normal curve here

brainly.com/question/30999102

#SPJ4

The value of the constant c that makes the following function are c = 0.

Constant is a term used to describe a value that remains unchanged or fixed throughout a program or process. It can be a numeric value, a character value, a string, or a Boolean (true/false) value. Common examples of constants include physical constants, mathematical constants, and programming-language keywords.A constant is a value that does not change, regardless of the conditions or context in which it is used. Common examples of constants include mathematical values such as pi (3.14159), physical constants such as the speed of light (299,792,458 m/s), and other constants such as the universal gravitational constant (6.67408 × 10−11 m3 kg−1 s−2).

To learn more about constant

https://brainly.com/question/27598477

#SPJ1

Therefore, c must equal 0 in order for the two sides of the function to be equal. and The one with the greater absolute value is b = 10.

A function is a block of code that performs a specific task. It is a subprogram or a set of instructions that can be used multiple times in a program.

27. For the function to be continuous at x = 7, the limit of the function as x approaches 7 from the left must equal the limit of the function as x approaches 7 from the right.
This means that the value of y as x approaches 7 must be the same on both the left and right sides of the point.
Since the left side of the function is y = c*y + 3, the right side of the function must also be equal to y = c*y + 3.
Therefore, c must equal 0 in order for the two sides of the function to be equal.

28. In order for the function to be continuous at x = 5, the value of y at x = 5 must be the same on both the left and right sides of the point.
Since the left side of the function is y = b - 2x, the right side of the function must also be equal to y = b - 2x.
Therefore, b must equal 10 in order for the two sides of the function to be equal.

To learn more about function

https://brainly.com/question/11624077

#SPJ1

Complete Question:

a) As per the given budget, the amount of interval that would be better for the city is 95% confidence interval.

b) The interval that be worse for the planners is depends on sample size

c) They achieve an interval estimate that would better serve their planning needs is depends on margin of error

d) The number of days worth of data should they collect to have confidence of estimating the true mean to 30 days

To obtain a better estimate, the city can create a confidence interval, which is a range of values that is likely to contain the true population mean with a certain degree of confidence.

However, there are also some disadvantages to using a confidence interval. The interval estimate may be wider than a point estimate, which means that the budget planners may have to allocate a larger budget to account for the uncertainty in the estimate.

To achieve a better interval estimate, the city could increase the sample size or reduce the variability of the data. Increasing the sample size reduces the margin of error and increases the precision of the estimate.

Finally, to determine how many days' worth of data the city should collect to estimate the true mean with a certain degree of confidence, the city would need to consider the desired level of precision, the variability of the data, and the desired level of confidence.

Typically, a larger sample size will provide a more accurate estimate, but this also depends on the variability of the data. In general, a sample size of at least 30 is recommended for a reasonably accurate estimate.

To know more about budget here

https://brainly.com/question/15683430

#SPJ4

Answer:

-8: (-4, -3]

-7: (-3, -1]

(-5, -1]: (-5, -1]

(-4, -1]: (-4, -1]

[-3, 1]: [-3, 1]

(2, 1): (1, 2]