hhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllllllllllllllpppppppppppp

The star is bigger than our sun. The correct option is 1.

The flow chart of the life cycle of a star indicates that the star starts as a nebula, which is a cloud of gas and dust. The nebula can collapse due to gravitational forces and form a protostar. The protostar can then continue to contract and heat up until it reaches a temperature and density at which nuclear fusion can occur, leading to the star entering the main sequence phase.

The size of a star is determined by its mass, and the more massive a star is, the bigger it will be. Based on this information, we can infer that if a star follows the life cycle shown in the flow chart, starting from a nebula and eventually reaching the main sequence, it must be at least as massive as our sun or even more massive, since only stars with sufficient mass can become main sequence stars.

To learn about the heliocentric model of the Solar System click:

https://brainly.com/question/12075871

#SPJ2

Answer: D

Explanation:

An elastic collision is a collision in which there is no net loss in kinetic energy in the system as a result of the collision. Both momentum and kinetic energy are conserved quantities in elastic collisions. Suppose two similar trolleys are traveling toward each other with equal speed.

The magnitude of the frictional force working on the box is 14 N.

According to Newtons's first law, an object will continue in its state of rest or state of uniform motion unless it is acted upon by an unbalanced force. This means that motion or acceleration is caused by an unbalanced force.

Since the box is moving at constant velocity, the frictional force on the box and the force that moves the box forward are exactly equal in magnitude but opposite in direction.

Learn more: https://brainly.com/question/9352088?

Answer:

Explanation:

PE = mgh where m is the mass in kg, g is the pull of gravity which is 9.8, and h is the height of the object above the point to which it could possibly fall, measured in meters. Plugging in:

PE = 10(9.8)(20) so

PE = 1960 J

This should be rounded to 1 sig fig according to the rules of sig fig and your numbers here, but I imagine you're not following them all that much. It should be 2000 J

Answer:

The net magnetic field ta the center of square is[tex]1.36\times10^{-4} T[/tex].

Explanation:

Current, I = 12 A , side ,a = 10 cm =  0.1 m

Let the magnetic field due to the one side is B.

The magnetic field is given by

[tex]B = \frac{\mu o}{4\pi}\times \frac{I}{r}\times \left (Sin A +Sin B \right )\\\\B = 10^{-7}\times \frac{12}{0.05}\times \left ( sin 45 + sin 45 \right )\\\\B = 3.4\times 10^{-5} T[/tex]

Net magnetic field at the center of the square is

B' = 4 B

[tex]B'= 4\times 3.4\times 10^{-5}\\\\B' = 1.36\times10^{-4} T[/tex]

The magnitude of your displacement can be equal to the distance you covered, or it can be less than the distance you covered.  But it can never be greater than the distance you covered.

This is because displacement is a straight line, whereas distance can be a straight line, a squiggly line, a zig-zag line, a line with loops in it, a line with a bunch of back-and-forths in it, or any other kind of line.

The straight line is always the shortest path between two points.

Answer:

Increase in frequency constantly

Explanation:

This concept can be explained by Doppler shift as per which any form of disturbance spreads out spherically from its point of origin. If the source of sound wave is stationary and the receiver is also stationary, then the frequency remains the same but if the source is moving, then the disturbance caused is closer on one side and distant on the other side thereby producing shorter wavelength in direction the source is moving and longer wavelength in the opposite direction.

Answer:

F = 124 N

Explanation:

Given that,

The mass of bicycle and the rider, m = 12 kg + 50 kg = 62 kg

Acceleration of system, a = 2 m/s²

We need to find the force required to accelerate the system. We know that,

Net force, F = ma

Put all the values,

F = 62 kg × 2 m/s²

F = 124 N

So, the required force is equal to 124 N.

The answer is B. Mono and polyunsaturated fats because the other two are really harmful and they are not healthy whatsoever.

Answer: hello your question lacks some data attached below is the missing data

answer : T - mg = ma[tex]_{c}[/tex]

Explanation:

Given that the vine has a fixed end and Tarzan's path is circular

At Tarzans lowest point the point can be expressed as shown below.

It can be expressed as : T - mg = ma[tex]_{c}[/tex]

Answer:

The answer is C because they have to be close to be able to interact

Answer:

C. where the electric field lines are closest together 

Explanation:

Answer:

Since it us the resistance that causes the power output, it might be intuitive to think that more resistance produces more power but as P=I^2 * R one actually needs high current and low resistqnce. That means 75 W has lower resistance and higher current.

Now you may think that making the resistance very low, one gets the most power. Not so, as the circuit has wires, power source etc. All the have their resistance. In theory one gets the maximum power over a resistor when the resistor is half of the total resistance of the circuit. This in practice would be inefficient as one would lose half of the total power elsewhere. In practice circuits have fuses that limit the current and one gets the maximum power at the current the fuse is rated to. So if there is 20 A fuse, the maximum power is 2400 W and the corresponding resistance 6 ohm.

Answer:

5

Explanation:

The light intensity may be defined as the strength of the light or the magnitude of its brightness that a source of light can produce.

The light threshold is the minimum intensity of the light that our eye can detect and the ability to adapt to darkness.

In the context, Daniel wishes to find if can notice the difference in the intensity of the light when he add 5 candles to the set of 50 candles.

He noticed that when he added 5 candles, he could notice the difference in the intensity and when he added less than 5 candles to the set of 50 candles he could not detect.

Thus, the difference threshold for Daniel to detect the change in the intensity of the light is 5 candles.

Answer:

6KW

Explanation:

The computation is shown below:

We know that

Work done= m ×g× h

Here

W= 300×10×10

= 30000 J

= 30 KJ

And

Power= Work done ÷time taken

 P = 30000 ÷ 5

= 6000W

= 6KW

The above represent the answer

Answer:

Thermal physics

Explanation:

Because it uses temperature

Answer:

In my opinion both are easier if you'll work hard on it...

Answer:

flowers

Explanation:

i'm really not sure but i have this gut feeling its flowers

Answer:

Explanation:

F = ma and

[tex]a=\frac{v}{t}[/tex]

We have F, we have m, but in order to solve for v, we need a.

30.0 = 3.00a so

a = 10.0 m/s/s. Plug that in for a in the second equation and solve for v:

[tex]10.0=\frac{v}{3.00}[/tex] so

v = 10.0(3.00) so

v = 30.0 m/s

Answer:

ml tayo 1v1 durugin kita

Explanation:

ano takot ml 1v1

Answer:

A

Explanation:

Answer:

5.2 s

Explanation:

From the question given above, the following data were obtained:

Velocity = 7.5 m/s

Displacement = 39 m up

Time =?

The time taken for the cable cab to get to 39 m can be obtained as follow:

Velocity = Displacement / Time

7.5 = 39 / time

Cross multiply

7.5 × time = 39

Divide both side by 7.5

Time = 39 / 7.5

Time = 5.2 s

Thus, the time taken for the cable cab to get to 39 m up is 5.2 s

Answer:

Diana and that

Explanation:

muyayyano

Answer:

A. [tex]1.88\times 10^{-11}\,F[/tex].

Explanation:

By definition of Electric Capacitance, the capacitance of the system ([tex]C[/tex]), in farads, is described by the following formula:

[tex]C = \frac{q}{V}[/tex] (1)

Where:

[tex]q[/tex] - Electric charge, in coulombs.

[tex]V[/tex] - Voltage, in volts.

If we know that [tex]q = 9.4\times 10^{-10}\,C[/tex] and [tex]V = 50\,V[/tex], then the capacitance of the system is:

[tex]C = \frac{9.4\times 10^{-10}\,C}{50\,V}[/tex]

[tex]C = 1.88\times 10^{-11}\,F[/tex]

The correct answer is A.

Answer:

12.0 Volt

Explanation:

Step 1: Given data

Resistance of the ohmic dipole (R): 100 Ohm

Intensity of current (I): 120 mA (0.120 A)

Step 2: Calculate the voltage (V) across this chemical dipole

To calculate the voltage across the ohmic dipole, we will use Ohm's law.

I = V/R

V = I × R

V = 0.120 A × 100 Ohm = 12.0 V

Answer:

A simple machine is a device that multiply an applied force by the use of the mechanical advantage built into the machine. Therefore, a simple machine changes the direction in which the applied force acts or the magnitude of the applied force, or both in order to do work

A retractable measuring tape is a device used for length measurement such that the direction of the applied force is reversed during retraction, while the magnitude of the output force is constant and dependent on the coil in the measuring

Therefore, the measuring tape does not have a constant mechanical advantage or act as a force multiplier, and therefore;

It is not a simple machine

Explanation:

Answer:

1. The reason why nichrome wire is used in a heater is due to the properties of nichrome which makes it a material of choice for heating application including;

i) The cost of manufacture of nichrome is low

ii) Nichrome has both high mechanical and creep strength, and therefore is suitable for installation and use in a wide setting

iii) Nichrome has a high resistance to electron flow, making it a good electrical heating element

iv) Nichrome has a high resistance to oxidation, such that it can be reused several times as a heater

v) The high ductility of nichrome allows it to be stretched and drawn around different vessels with contents to which heat is to be supplied

2. Copper wire is not used in heaters because according to Joule's law, the heat produced from the flow of electric current, 'I', through a material having a resistance, 'R', for a time, 't', is proportional to I²·R·t, and copper has a very low resistance, 'R', to the flow of electric current, and therefore, will not produce sufficient heat required at a given current level

Explanation:

Answer:

nice calculations!

Explanation:

Answer: Artificial Selection

Explanation: Artificial Selection is described as the identification of desirable traits in both plants and animals, then enhance them, so that those traits can be manifested in future generations.

This is the scope behind cross breeding of plants and animals and this have largely been used in agricultural sector to improve input (such as disease-resistant seeds) and other biotechnological settings.

Darwin's described artificial selection as the human form of natural selection.

Answer:

See the answer below

Explanation:

Acceleration due to gravity (g) is the accelerational force experienced by a body as a result of the influence of the earth's gravitational force. It is a vector quantity, that is, it has both magnitude and direction.

The acceleration due to gravity is inversely proportional to the square of the radius of the earth. Hence, g at the equatorial region is slightly lesser (9.780 m/s2) than that of the polar regions (9.832 m/s2) of the earth because the earth bulges at the equator leading to a higher radius than at the poles.  

Answer:

V = 5 m³

Explanation:

The density of air, d = 1.2 kg/m³

Mass of the dry air, m = 6 kg

We need to find the volume o the gas. We know that, the density of an object is given by mass divided by its volume. So,

[tex]d=\dfrac{m}{V}\\\\V=\dfrac{m}{d}\\\\V=\dfrac{6}{1.2}\\\\V=5\ m^3[/tex]

So, the volume of the dry air is 5 m³.