The common factors of sixteen and twenty are 1, 2, and 4.
The factors of sixteen are 1, 2, 4, 8, and 16. The factors of twenty are 1, 2, 4, 5, 10, and 20. The factors that are common to both numbers are 1, 2, and 4.
To calculate the factors of sixteen, we can start by dividing sixteen by two until we cannot divide any further. We can start with sixteen divided by two, which equals eight. Eight divided by two equals four. Four divided by two equals two. Two divided by two equals one. As we can see, the factors of sixteen are 1, 2, 4, 8, and 16
To calculate the factors of twenty, we can start by dividing twenty by two until we cannot divide any further. We can start with twenty divided by two, which equals ten. Ten divided by two equals five. Five divided by two equals two. Two divided by two equals one. As we can see, the factors of twenty are 1, 2, 4, 5, 10, and 20.The common factors of sixteen and twenty are 1, 2, and 4. This can be determined by comparing the two lists of factors. As we can see, 1, 2, and 4 are present in both lists.
Learn more about factors here:
https://brainly.com/question/29128446
#SPJ4
Complete question
What are the common factors of sixteen and twenty ?
A mail-order company business has six telephone lines. Let X denote the number of lines in use at a specified time. Suppose the pmf of X is as given in the accompanying table.
x 0 1 2 3 4 5 6
p(x) 0.10 0.15 0.20 0.25 0.20 0.05 0.05
Calculate the probability of each of the following events.
(a) {at most three lines are in use}
(b) {fewer than three lines are in use}
(c) {at least three lines are in use}
(d) {between two and five lines, inclusive, are in use}
(e) {between two and four lines, inclusive, are not in use}
(f) {at least four lines are not in use}
The probability of each of the events of {at most three lines are in use}, {fewer than three lines are in use}, {at least three lines are in use, {between two and five lines, inclusive, are in use}, {between two and four lines, inclusive, are not in use} and {at least four lines are not in use} are 0.70, 0.45, 0.55, 0.80, 0.35 and 0.40 respectively.
The problem involves finding probabilities of different events for a mail-order company with six telephone lines. The probability mass function (pmf) is given, and we use it to calculate the probabilities of different events such as "at most three lines are in use" or "between two and five lines, inclusive, are in use".
To calculate these probabilities, we use basic probability formulas such as the addition rule, subtraction rule, and the complement rule.
P(X ≤ 3) = 0.10 + 0.15 + 0.20 + 0.25 = 0.70
P(X < 3) = 0.10 + 0.15 + 0.20 = 0.45
P(X ≥ 3) = 1 - P(X < 3) = 1 - (0.10 + 0.15 + 0.20) = 0.55
P(2 ≤ X ≤ 5) = P(X ≤ 5) - P(X < 2) = (0.10 + 0.15 + 0.20 + 0.25 + 0.20) - 0.10 = 0.80
P(2 ≤ X ≤ 4) = 0.20 + 0.25 + 0.20 = 0.65, so P(2 ≤ X ≤ 4)ᶜ = 1 - 0.65 = 0.35
P(X ≥ 4) = 0.20 + 0.05 + 0.05 = 0.30, so P(X ≤ 3) = 1 - P(X ≥ 4) = 0.70 - 0.30 = 0.40
These formulas are applied based on the given events to determine the probabilities.
To know more about Probability:
https://brainly.com/question/11234923
#SPJ4
select a random integer from -200 to 200. which of the following pairs of events re mutualyle exclusive
The pairs of events of random integers are pairs of events are,
even and odd , negative and positive integers, zero and non-zero integers.
Two events are mutually exclusive if they cannot occur at the same time.
Selecting a random integer from -200 to 200,
Any two events that involve selecting a specific integer are mutually exclusive.
For example,
The events selecting the integer -100
And selecting the integer 50 are mutually exclusive
As they cannot both occur at the same time.
Any pair of events that involve selecting a specific integer are mutually exclusive.
Here are a few examples,
Selecting an even integer and selecting an odd integer.
Selecting a negative integer and selecting a positive integer
Selecting the integer 0 and selecting an integer that is not 0.
But,
Events such as selecting an even integer and selecting an integer between -100 and 100 are not mutually exclusive.
As there are even integers between -100 and 100.
Learn more about integer here
brainly.com/question/30099746
#SPJ4
Which of the following random variables can be approximated to discrete distribution and continuous distribution? a. b. C. d. The wages of academician and non-academician workers in UPSI. The time taken to submit online quiz answer's document. The prices of SAMSUM mobile phones displayed at a phone shop The number of pumps at Shell petrol stations in Perak. [2 marks] 10% chance of contamination by a particular
10% chance of contamination by a particular: It's not clear what random variable is being referred to here, but if it's the probability of contamination.
What is Distribution?In general terms, a distribution refers to the way something is divided or spread out. In the context of statistics and probability theory, a distribution is a mathematical function that describes the likelihood of different possible outcomes or values that a variable can take.
There are various types of distributions, but some of the most commonly used ones include:
Normal distribution: also known as the Gaussian distribution, it is a continuous probability distribution that is symmetrical around the mean, with most of the data falling within one standard deviation of the mean.
Binomial distribution: this is a discrete probability distribution that describes the likelihood of a certain number of successes in a fixed number of trials.
Poisson distribution: another discrete probability distribution that describes the likelihood of a certain number of events occurring in a fixed interval of time or space.
Exponential distribution: a continuous probability distribution that describes the time between events occurring at a constant rate.
Distributions are essential in statistical analysis as they can help to understand and analyze data, make predictions, and draw conclusions about a population based on a sample of data.
Given by the question.
a. The wages of academician and non-academician workers in UPSI: This random variable can be approximated to a continuous distribution as wages can take on any numerical value within a range. However, it's worth noting that in practice, there may be discrete intervals or categories of wages, in which case a discrete distribution may be more appropriate.
b. The time taken to submit online quiz answer's document: This random variable can also be approximated to a continuous distribution as it can take on any numerical value within a range.
c. The prices of SAMSUNG mobile phones displayed at a phone shop: This random variable can be approximated to a continuous distribution as prices can take on any numerical value within a range.
d. The number of pumps at Shell petrol stations in Perak: This random variable can be approximated to a discrete distribution since the number of pumps can only take on integer values.
To learn more about function:
https://brainly.com/question/21145944
#SPJ1
Rewrite without absolute value for the given condition: |(square root 2) +3 -5|
Answer: We can simplify the expression inside the absolute value first:
|(sqrt(2) + 3 - 5)|
= |(sqrt(2) - 2)|
Since sqrt(2) > 2, we know that sqrt(2) - 2 is negative. Therefore, we can rewrite the absolute value as a negative:
|sqrt(2) - 2| = -(sqrt(2) - 2)
So the expression without absolute value is:
-(sqrt(2) - 2)
Step-by-step explanation:
(b) a dy integral that represents the surface area of the solid formed when c is rotated about the (x or y)-axis
The surface area of the surface generated by rotating the curve y = x² about the y-axis, and we found that the surface area is approximately 54.33 square units.
In this case, the curve we want to rotate is y = x², and we want to rotate it about the y-axis. To use the formula above, we need to express the equation of the curve in terms of x. Therefore, we need to rewrite y = x² as x = √y.
Next, we need to find the derivative of x = √y with respect to y, which is:
dx/dy = 1/2√y
Substituting this into the formula for the surface area, we get:
Surface Area = 2π ∫[0,4] √y √(1+(1/2√y)²) dy
Simplifying the expression inside the square root, we get:
Surface Area = 2π ∫[0,4] √(y+(1/4)) dy
We can evaluate this integral using the power rule of integration, which gives:
Surface Area = 2π [2/3(y+(1/4))^(3/2)]₀⁴
Simplifying further, we get:
Surface Area = 2π [2/3(17/4)^(3/2)]
Surface Area ≈ 54.33 square units
Therefore, the surface area of the surface generated by rotating the curve y = x² about the y-axis is approximately 54.33 square units.
To know more about surface area here
https://brainly.com/question/27784309
#SPJ4
Complete Question:
How do you find the area of the surface generated by rotating the curve about the y-axis y = x^2 , 0 ≤ x ≤ 2 ?
22 and 28 are two numbers Express the smallest number as a percentage of the sum of the two numbers
Answer: 44%
Step-by-step explanation:
22 is the smallest of the two numbers, and you want that number as a percentage of the sum of the two numbers. So basically it is asking you to put 22/(22+28) as a percentage. The step by step is as follows:
1. Simplify denominator
22+28 = 50
2. Rewrite the fraction so that the numerator is out of 100
22/50 = 44/100
3. Convert this new fraction to percentage
44/100= 44%
Hope this helps!!
Samir bought three pounds of strawberries for $12.00. What is the price, in dollars
per ounce of strawberries?
1 pound = 16 ounces
Before you try that problem, answer the question below.
How many ounces of strawberries did Samir buy?
A line passes through points (5,3) and (-5,-2). Another line passes through points (-6,4) and (2,-4). Find the coordinates (ordered pairs) of the intersection of the two lines.
Step 1: Find the slope of each line
Step 2: Find the y-intercept of each line
Step 3: Write each line in slope-intercept form (y = mx + b)
Step 4: Solve for the system. Find the point of intersection for the system
Please help I will mark brainliest!!!
The point of intersection of the two lines is (-3.4, -1.2).
How to find the slope of each line?Step 1: The slope of a line passing through two points (x1,y1) and (x2,y2) can be found using the formula:
m = (y2-y1)/(x2-x1)
Using this formula, we can find the slope of the first line:
m1 = (−2−3)/(-5 -5) = −5/(-10) = 1/2
And the slope of the second line:
m2 = (−4−4)/(2 -(-6)) = -8/4 = -2
Step 2: Find the y-intercept of each line
The y-intercept of a line in slope-intercept form (y = mx + b) is the value of y when x=0. We can use one of the two given points on each line to find the y-intercept:
For the first line passing through points (5,3) and (−5,−2):
y = mx + b
3 = (1/2)(5) + b
b = 3 - 5/2
b = 1/2
So the first line can be written as y = 1/2x + 1/2
For the second line passing through points (−6,4) and (2,−4):
y = mx + b
4 = (-2)(−6) + b
b = 4 - 12
b = -8
So the second line can be written as y = -2x - 8
Step 3: Each line in slope-intercept form (y = mx + b):
First line: y = 1/2x + 1/2
Second line: y = -2x - 8
Step 4: To find the point of intersection of the two lines, we need to solve the system of equations. We can solve for x by setting the two right-hand sides equal to each other:
1/2x + 1/2 = -2x - 8
(x + 1)/2 = -2x - 8
x + 1 = -4x - 16
5x = -16 - 1
5x = -17
x = -17/5
x = -3.4
Now that we know x, we can find y by substituting x=10 into one of the two equations:
y = -2x - 8
y = -2(-3.4) - 8
y = - 1.2
Thus, the point of intersection of the two lines is (-3.4, -1.2).
Learn more about equation of a line on:
https://brainly.com/question/18831322
#SPJ1
In a certain region of space the electric potential is given by V=+Ax2y−Bxy2, where A = 5.00 V/m3 and B = 8.00 V/m3.1) Calculate the magnitude of the electric field at the point in the region that has cordinates x = 1.10 m, y = 0.400 m, and z = 0.2)Calculate the direction angle of the electric field at the point in the region that has cordinates x = 1.10 m, y = 0.400 m, and z = 0.( measured counterclockwise from the positive x axis in the xy plane)
The direction angle of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is approximately 74.5 degrees clockwise from the positive x-axis in the xy plane.
To calculate the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0), we need to take the negative gradient of the electric potential V:
E = -∇V
where ∇ is the del operator, which is given by:
∇ = i(∂/∂x) + j(∂/∂y) + k(∂/∂z)
and i, j, k are the unit vectors in the x, y, and z directions, respectively.
To calculate the magnitude of the electric field at the point, we first need to find the partial derivatives of V with respect to x and y:
∂V/∂x = 2Axy - By^2
∂V/∂y = Ax^2 - 2Bxy
Substituting the values of A, B, x, and y, we get:
∂V/∂x = 2(5.00 V/m^3)(1.10 m)(0.400 m) - (8.00 V/m^3)(0.400 m)^2 = 0.44 V/m
∂V/∂y = (5.00 V/m^3)(1.10 m)^2 - 2(8.00 V/m^3)(1.10 m)(0.400 m) = -1.64 V/m
Next, we can calculate the magnitude of the electric field:
E = -∇V = -i(∂V/∂x) - j(∂V/∂y) - k(∂V/∂z)
= -i(0.44 V/m) + j(1.64 V/m) + 0k
= (0.44 i - 1.64 j) V/m
The magnitude of the electric field is given by:
|E| = sqrt((0.44 V/m)^2 + (-1.64 V/m)^2) = 1.70 V/m
Therefore, the magnitude of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is 1.70 V/m.
To calculate the direction angle of the electric field, we need to find the angle that the electric field vector makes with the positive x-axis in the xy plane.
The angle can be found using the arctan function:
θ = arctan(Ey/Ex)
Substituting the values of Ex and Ey, we get:
θ = arctan(-1.64 V/m / 0.44 V/m) = -1.30 radians
The negative sign indicates that the direction angle is measured counter clockwise from the negative x-axis, which is equivalent to measuring clockwise from the positive x-axis.
Converting to degrees, we get:
θ = -1.30 radians * (180 degrees / pi radians) = -74.5 degrees
Therefore, the direction angle is approximately 74.5 degrees clockwise in the xy plane.
To know more about electric field:
https://brainly.com/question/14768728
#SPJ4
Write a sine function that has a midline of, y=5, an amplitude of 4 and a period of 2.
Answer:
y = 4 sin(π x) + 5
Step-by-step explanation:
A sine function with a midline of y=5, an amplitude of 4, and a period of 2 can be written in the following form:
y = A sin(2π/ x) +
where A is the amplitude, is the period, is the vertical shift (midline), and x is the independent variable (usually time).
Substituting the given values, we get:
y = 4 sin(2π/2 x) + 5
Simplifying this expression, we get:
y = 4 sin(π x) + 5
Therefore, the sine function with the desired characteristics is:
y = 4 sin(π x) + 5
Create a trigonometric function that models the ocean tide..
Explain why you chose your function type. Show work for any values not already outlined above.
Answer:
One possible function that models the ocean tide is:
h(t) = A sin(ωt + φ) + B
where:
h(t) represents the height of the tide (in meters) at time t (in hours)
A is the amplitude of the tide (in meters)
ω is the angular frequency of the tide (in radians per hour)
φ is the phase shift of the tide (in radians)
B is the mean sea level (in meters)
This function is a sinusoidal function, which is a common type of function used to model periodic phenomena. The sine function has a natural connection to circles and periodic motion, making it a good choice for modeling the regular rise and fall of ocean tides.
The amplitude A represents the maximum height of the tide above the mean sea level, while B represents the mean sea level. The angular frequency ω determines the rate at which the tide oscillates, with one full cycle (i.e., a high tide and a low tide) occurring every 12 hours. The phase shift φ determines the starting point of the tide cycle, with a value of zero indicating that the tide is at its highest point at time t=0.
To determine specific values for A, ω, φ, and B, we would need to gather data on the tide height at various times and locations. However, typical values for these parameters might be:
1. A = 2 meters (representing a relatively large tidal range)
2. ω = π/6 radians per hour (corresponding to a 12-hour period)
3. φ = 0 radians (assuming that high tide occurs at t=0)
4. B = 0 meters (assuming a mean sea level of zero)
Using these values, we can write the equation for the tide as:
h(t) = 2 sin(π/6 t)
We can evaluate this equation for various values of t to get the height of the tide at different times. For example, at t=0 (the start of the cycle), we have:
h(0) = 2 sin(0) = 0
indicating that the tide is at its lowest point. At t=6 (halfway through the cycle), we have:
h(6) = 2 sin(π/2) = 2
indicating that the tide is at its highest point. We can also graph the function to visualize the rise and fall of the tide over time:
Tide Graph
Overall, this function provides a simple and effective way to model the ocean tide using trigonometric functions.
(please mark my answer as brainliest)
Is the function represented by the following table linear, quadratic or exponential?
The function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.
What is function in mathematics?Function in mathematics is a relation between two sets, where one set is the input and the other set is the output. Functions are an important tool in mathematics and can be used to describe and model real-world phenomena. Functions take inputs, manipulate them and produce outputs. They can be used to represent relationships between two or more variables, or to represent a complex process. Functions allow us to break down complex problems into smaller, more manageable pieces and to study how changes in one variable affect other variables.
The function represented by the table is linear. It can be determined by the fact that the y-values change by the same amount every time the x-values increase by one unit. In this case, the y-values decrease by 2 each time the x-values increase by one unit. This is an example of a linear function.
Linear functions have the shape of a straight line and are characterized by having a constant rate of change. The constant rate of change is represented by the slope of the line, which in this case is -2. This means that for every one unit increase in the x-values, the y-values decrease by two.
A quadratic function is the opposite of a linear function, as it has a rate of change that is not constant. Quadratic functions are characterized by their parabolic shape and their rate of change increases as x-values increase. Exponential functions are characterized by their curved shape and increase exponentially as x-values increase.
In conclusion, the function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.
To know more about function click-
https://brainly.com/question/25841119
#SPJ1
Bokomo produced 300 Granola megapacks for the Mogoditshane market. Bokomo’s marginal cost equation is as follows: MC=2x-100. Find the cost of producing an additional 200 items due to increased demand.
The cost of producing an additional 200 items due to increased demand is 180,000 Botswana Pula.
What is marginal cost?Marginal cost is the additional cost incurred by producing one additional unit of a good or service. In other words, it is the cost of producing one more unit of output.
According to question:The marginal cost (MC) equation given is MC = 2x - 100, where x is the number of units produced.
To find the cost of producing an additional 200 items due to increased demand, we need to calculate the marginal cost of producing these 200 items and then multiply that by 200.
The marginal cost of producing 200 additional items is given by:
MC(200) = 2(300 + 200) - 100
MC(200) = 2(500) - 100
MC(200) = 900
So the marginal cost of producing 200 additional items is 900. To find the total cost of producing these 200 items, we can simply multiply the marginal cost by the number of units produced, which in this case is 200:
Total cost = MC(200) × 200
Total cost = 900 × 200
Total cost = 180,000
Therefore, the cost of producing an additional 200 items due to increased demand is 180,000 Botswana Pula.
To know more about marginal cost visit:
https://brainly.com/question/1264758
#SPJ1
Values of the Born exponents for Rb+ and l-are 10 and 12, respectively. The Born exponent for Rbl is therefore: O A. 2 O B.22 C. 1/11 OD. 11
The Born exponent or interatomic potential energy for Rbl is 11 ( approximately). The correct option is D).
The Born exponent for RbI can be calculated using the relationship between the Born exponent and the interionic distance. The Born exponent is defined as the ratio of the repulsive to attractive contributions to the interatomic potential energy, and it depends on the charges and sizes of the ions.
For Rb+ and I-, the Born exponents are 10 and 12, respectively. This means that the repulsive interaction between Rb+ and I- is weaker than the attractive interaction, as the repulsion is proportional to Rb+^10 and the attraction is proportional to I^-12. Therefore, the attractive interaction dominates.
For RbI, we can use the relationship between the Born exponent and the interionic distance to calculate the Born exponent. This relationship is given by:
B = (1/d) * ln[(l1 + l2)/|l1 - l2|]
where B is the Born exponent, d is the interionic distance, and l1 and l2 are the ionic radii of the cation and anion, respectively.
Assuming the ionic radii of Rb+ and I- are additive, we have:
l1 + l2 = l(RbI) = l(Rb+) + l(I-) = 1.52 + 1.81 = 3.33 Å
|l1 - l2| = |l(Rb+) - l(I-)| = |1.52 - 1.81| = 0.29 Å
Substituting these values into the equation for B, we get:
B = (1/d) * ln[(l1 + l2)/|l1 - l2|] = (1/d) * ln[3.33/0.29] ≈ 11.02
Therefore, the Born exponent for RbI is approximately 11.02.
The correct answer is D).
To know more about interatomic potential:
https://brainly.com/question/29557336
#SPJ4
Find x, if √x +2y^2 = 15 and √4x - 4y^2=6
pls help very soon
Answer:
We have two equations:
√x +2y^2 = 15 ----(1)
√4x - 4y^2=6 ----(2)
Let's solve for x:
From (1), we have:
√x = 15 - 2y^2
Squaring both sides, we get:
x = (15 - 2y^2)^2
Expanding, we get:
x = 225 - 60y^2 + 4y^4
From (2), we have:
√4x = 6 + 4y^2
Squaring both sides, we get:
4x = (6 + 4y^2)^2
Expanding, we get:
4x = 36 + 48y^2 + 16y^4
Substituting the expression for x from equation (1), we get:
4(225 - 60y^2 + 4y^4) = 36 + 48y^2 + 16y^4
Simplifying, we get:
900 - 240y^2 + 16y^4 = 9 + 12y^2 + 4y^4
Rearranging, we get:
12y^2 - 12y^4 = 891
Dividing both sides by 12y^2, we get:
1 - y^2 = 74.25/(y^2)
Multiplying both sides by y^2, we get:
y^2 - y^4 = 74.25
Let z = y^2. Substituting, we get:
z - z^2 = 74.25
Rearranging, we get:
z^2 - z + 74.25 = 0
Using the quadratic formula, we get:
z = (1 ± √(1 - 4(1)(74.25))) / 2
z = (1 ± √(-295)) / 2
Since the square root of a negative number is not real, there are no real solutions for z, which means there are no real solutions for y and x.
Therefore, the answer is "no solution".
Solve please geometry, solve for x
Answer: The answer is D
Step-by-step explanation:
Pythagorean theorem: a²+b²=c²
x²+x²=14²
2x²=196
Evaluate...
x=7√2
What is the code to this I need help asap.
Based on the information in the image, the values of the symbols in order would be: 5, 9.86, 9.93, 7.91. 10.56.
How to find the equivalent value of each symbol?To find the equivalent value of each symbol we must apply the Pythagorean theorem and find the value of the hopotenuse of all triangles as shown below:
Triangle 1:
4² + 3² = c²16 + 9 = c²c = 5Triangle 2:
5² + 8.5² = c²25 + 72.25 = c²c = 9.86Triangle 3:
9.86² + b² = 14²b² = 14² - 9.86²b² = 98.78b = 9.93Triangle 4:
a² + 6² = 9.93²a² = 9.93² - 6²a² = 62.60a = 7.91Triangle 5:
7.91² + 7² = c²62.56 + 49 = c²111.56 = c²10.56 = cAccording to the above, the values of the symbols in order would be:
5, 9.86, 9.93, 7.91. 10.56.
Learn more about triangles in: https://brainly.com/question/2773823
#SPJ1
A shop is having a 40% sale. A jumper originally costs £50. How much will it be in sale?
Answer:
30 pounds
Step-by-step explanation:
Since the jumper costs 50 pounds, the decimal for the number will be:
50.
To find ten percent of the number, you move the decimal one time to the LEFT.
Therefore, 10% of 50 pounds will be 5 pounds. To find 40%, we simply will multiply the 10% amount by 4.
40% of 50 will be:
20
Therefore, the jumper will have 20 pounds off.
Since the original cost is 50 pounds, we simply will just subtract 50 - 20:
50 - 20 = 30
The jumper will cost 30 pounds with the sale deal.
find the two numbers whose ratio is 3:7 and their difference is 20
Answer:
the two numbers are 15 and 35, and their ratio is 3:7, and their difference is 20.
Step-by-step explanation:
What is the probability that a 58% free-throw shooter will miss her next free throw?
se spherical coordinates to evaluate the triple integral where is the region bounded by the spheres and .
The value of the triple integral[tex]\int \int\int _{E } \frac{e^{-(x^2+y^2+z^2)}}{\sqrt{(x^2+y^2+z^2}}\sqrt{dV}[/tex] by using spherical coordinates [tex]2\pi(e^{-1}-e^{-9})[/tex].
Given that the triple integral is-
[tex]\int \int\int _{E } \frac{e^{-(x^2+y^2+z^2)}}{\sqrt{(x^2+y^2+z^2}}\sqrt{dV}[/tex]
E is the region bounded by the spheres which are,
[tex]x^2+y^2+z^2=1\\\\x^2+y^2+z^2=9[/tex]
In spherical coordinates we have,
x = r cosθ sin ∅
y = r sinθ sin∅
z = r cos∅
dV = r²sin∅ dr dθ d∅
E contains two spheres of radius 1 and 3 () respectively, the bounds will be like this,
1 ≤ r ≤ 3
0 ≤ θ ≤ 2π
0 ≤ ∅ ≤ π
Then
[tex]\int \int\int _{E } \frac{e^{-(x^2+y^2+z^2)}}{\sqrt{(x^2+y^2+z^2}}\sqrt{dV}[/tex]
[tex]\int\int\int _{E} \frac{e^{-r^2}}{r}r^2Sin\phi drd\phi d\theta\\\\2\pi \int_{0}^{\pi} \int_1^3 re^{-r^2} dr d\phi\\\\2\pi \int_1^3 re^{-r^2} dr\\\\2\pi(e^{-1}-e^{-9})[/tex]
The complete question is-
Use spherical coordinates to evaluate the triple integral ∭ee−(x2 y2 z2)x2 y2 z2−−−−−−−−−−√dv, where e is the region bounded by the spheres x2 y2 z2=1 and x2 y2 z2=9.
learn more about triple integral,
https://brainly.com/question/30404807
#SPJ4
Consider g(x) = {a sin x + b, if x 2pi .
A. Find the values of a and b such that g(x) is a differentiable function.
B. Write the equation of the tangent line to g(x) at x = 2pi.
C. Use the tangent line equation from part B to write an approximation for the value of g(6).
Do not simplify
Answer:
A. For g(x) to be differentiable, the derivative of g(x) must exist at every point in its domain. The derivative of a sin x + b is a cos x, which exists for all values of x. Therefore, any values of a and b will make g(x) a differentiable function.
B. To find the equation of the tangent line to g(x) at x = 2π, we need to find the slope of the tangent line, which is the derivative of g(x) evaluated at x = 2π.
g'(x) = a cos x, so g'(2π) = a cos(2π) = a
Therefore, the slope of the tangent line at x = 2π is a. To find the y-intercept of the tangent line, we can plug in x = 2π into g(x) and subtract a times 2π:
y = g(2π) - a(2π)
= (a sin 2π + b) - a(2π)
= b - 2aπ
So the equation of the tangent line is:
y = ax + (b - 2aπ)
C. We can use the tangent line equation to approximate g(6) by plugging in x = 6 and using the equation of the tangent line at x = 2π.
First, we need to find the value of a. Since g'(2π) = a, we can use the derivative of g(x) to find a:
g'(x) = a cos x
g'(2π) = a cos (2π) = a
g'(x) = a = 2
Now, we can plug in a = 2, b = any value, and x = 2π into the tangent line equation:
y = ax + (b - 2aπ)
g(2π) = 2πa + (b - 2aπ)
a sin 6 + b ≈ 12π + (b - 4π)
Since we don't know the value of b, we can't find the exact value of g(6), but we can use the approximation:
g(6) ≈ 12π + (b - 4π)
Jenny took the car, the bus, and the train to get home in time.
What form of punctuation is missing?
O A. No punctuation is missing.
OB.
A period
OC.
A comma
OD. A semicolon
Last three times I have tried to take a picture of my question. Nothing comes up that resembles any of it. I don’t know what’s wrong with this app but it’s not helping.
According to the question. A. No punctuation is missing.
What is punctuation ?Punctuation is the use of symbols to indicate the structure and organization of written language. It is used to help make the meaning of sentences clearer and to make them easier to read and understand. Punctuation marks can also be used to indicate pauses in speech, to create emphasis, and to indicate the speaker’s attitude. There are many different types of punctuation marks, each with its own purpose. The most commonly used punctuation marks are the period, comma, question mark, exclamation mark, quotation marks, and the apostrophe.
Quotation marks are used to enclose quoted material, while the apostrophe is used to indicate possession or to replace missing letters in a word or phrase. By using punctuation correctly, writers can ensure that their messages are correctly understood by their readers.
To learn more about punctuation
https://brainly.com/question/30321693
#SPJ1
For the graph, find the average rate of change on the intervals given
See attached picture
The average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] are 2, -1.5, 1, and -1.5, respectively.
What is the average rate in math?It expresses how much the function changed per unit on average during that time period. It is computed by taking the slope of the straight line connecting the interval's endpoints on the function's graph.
To calculate the average rate of change for the intervals shown in the graph, we must first determine the slope of the line connecting the endpoints of each interval.
0-3 interval:
Because the interval's endpoints are (0, 1) and (3, 7), the slope of the line connecting them is:
slope = (y change) / (x change) = (7 - 1) / (3 - 0) = 2
pauses [3, 5]:
Because the interval's endpoints are (3, 7) and (5, 4), the slope of the line connecting them is:
slope = (y change) / (x change) = (4 - 7) / (5 - 3) = -1.5
[5–7] Interval:
Because the interval's endpoints are (5, 4) and (7, 6), the slope of the line connecting them is:
slope = (y change) / (x change) = (6 - 4) / (7 - 5) = 1
Interval 7 and 9:
Because the interval's endpoints are (7, 6) and (9, 3), the slope of the line connecting them is:
slope = (y change) / (x change) = (3 - 6) / (9 - 7) = -1.5
As a result, the average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] is 2, -1.5, 1, and -1.5.
To know more about Average Rate visit:
https://brainly.com/question/23715190
#SPJ1
Suppose A and B are nxn matrices such that B and AB are both invertible. Prove that A is also invertible.
Hint: Show that A can be multiplied (on either side) by some other matrix or matrices to equal I
Matrix B and AB both are invertible implies that A is invertible as a matrix C such that AC = CA = I.
For matrix A to be invertible,
Show that there exists a matrix C such that AC = CA = I,
where I is the identity matrix.
Since B and AB are both invertible,
There exist matrices D and E such that ,
BD = DB = I
And ABE = EAB = I.
Multiplying both sides of the equation ABE = I by D on the left and E on the right, we get,
ADEBE = DE
Since BD = I, we can simplify this to,
ADE = DE
Multiplying both sides of this equation by B on the left and B^(-1) on the right, we get,
AD = DB^(-1)
Now, let C = DB^(-1).
Then we have,
AC
= ADB^(-1)
= ABEB^(-1)
= AI
= A
and
CA
= DB^(-1)A
= DB^(-1)ABE
= DI
= I
Therefore, A is invertible as a matrix C such that AC = CA = I.
learn more about matrix here
brainly.com/question/13100048
#SPJ4
Use the shell method to set up and evaluate the integral that gives the volume of the solid generated by revolving the plane region about the y-axis.
Answer:
[tex]\dfrac{4096\pi}{5}\approx 2573.593\; \sf (3\;d.p.)[/tex]
Step-by-step explanation:
The shell method is a calculus technique used to find the volume of a solid revolution by decomposing the solid into cylindrical shells. The volume of each cylindrical shell is the product of the surface area of the cylinder and the thickness of the cylindrical wall. The total volume of the solid is found by integrating the volumes of all the shells over a certain interval.
The volume of the solid formed by revolving a region, R, around a vertical axis, bounded by x = a and x = b, is given by:
[tex]\displaystyle 2\pi \int^b_ar(x)h(x)\;\text{d}x[/tex]
where:
r(x) is the distance from the axis of rotation to x.h(x) is the height of the solid at x (the height of the shell).[tex]\hrulefill[/tex]
We want to find the volume of the solid formed by rotating the region bounded by y = 0, y = √x, x = 0 and x = 16 about the y-axis.
As the axis of rotation is the y-axis, r(x) = x.
Therefore, in this case:
[tex]r(x)=x[/tex]
[tex]h(x)=\sqrt{x}[/tex]
[tex]a=0[/tex]
[tex]b=16[/tex]
Set up the integral:
[tex]\displaystyle 2\pi \int^{16}_0x\sqrt{x}\;\text{d}x[/tex]
Rewrite the square root of x as x to the power of 1/2:
[tex]\displaystyle 2\pi \int^{16}_0x \cdot x^{\frac{1}{2}}\;\text{d}x[/tex]
[tex]\textsf{Apply the exponent rule:} \quad a^b \cdot a^c=a^{b+c}[/tex]
[tex]\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x[/tex]
Integrate using the power rule (increase the power by 1, then divide by the new power):
[tex]\begin{aligned}\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x&=2\pi \left[\dfrac{2}{5}x^{\frac{5}{2}}\right]^{16}_0\\\\&=2\pi \left[\dfrac{2}{5}(16)^{\frac{5}{2}}-\dfrac{2}{5}(0)^{\frac{5}{2}}\right]\\\\&=2 \pi \cdot \dfrac{2}{5}(16)^{\frac{5}{2}}\\\\&=\dfrac{4\pi}{5}\cdot 1024\\\\&=\dfrac{4096\pi}{5}\\\\&\approx 2573.593\; \sf (3\;d.p.)\end{aligned}[/tex]
Therefore, the volume of the solid is exactly 4096π/5 or approximately 2573.593 (3 d.p.).
[tex]\hrulefill[/tex]
[tex]\boxed{\begin{minipage}{4 cm}\underline{Power Rule of Integration}\\\\$\displaystyle \int x^n\:\text{d}x=\dfrac{x^{n+1}}{n+1}(+\;\text{C})$\\\end{minipage}}[/tex]
The Ford F-150 is the best selling truck in the United States.
The average gas tank for this vehicle is 23 gallons. On a long
highway trip, gas is used at a rate of about 3.2 gallons per hour.
The gallons of gas g in the vehicle's tank can be modeled by the
equation g(t)=23 -3.2t where t is the time (in hours).
a) Identify the domain and range of the function. Then graph
the function.
b) At the end of the trip there are 6.4 gallons left. How long
was the trip?
a) The domain and the range of the function are given as follows:
Domain: [0, 7.1875].Range: [0,23].The graph of the function is given by the image presented at the end of the answer.
b) The trip was 5.1875 hours long.
What are the domain and the range of a function?The function for this problem is defined as follows:
g(t) = 23 - 3.2t.
The domain is the set of input values that can be assumed by the function. The time cannot have negative measures, hence the lower bound of the domain is of zero, while the gas cannot be negative, hence the upper bound of the volume is given as follows:
23 - 3.2t = 0
3.2t = 23
t = 23/3.2
t = 7.1875 hours.
The range is given by the set of all output values assumed the function, which are the values of the gas, hence it is [0,23].
The graph is a linear function between points (0, 23) and (7.1875, 0).
At the end of the trip there were 6.4 gallons left, hence the length of the trip is given as follows:
23 - 3.2t = 6.4
t = (23 - 6.4)/3.2
t = 5.1875 hours.
More can be learned about functions at https://brainly.com/question/24808124
#SPJ1
You applied for k40 000.00 for a bank loan and you where given a flat rate interest of 9% for 2½ years. What is the amount he will pay the bank?
Answer:
The formula to calculate the amount of loan with flat rate interest is:
Amount = Principal + (Principal x Rate x Time)
Where,
Principal = the amount of loan
Rate = the interest rate per year
Time = the time period in years
Given,
Principal = K40,000.00
Rate = 9% per year
Time = 2.5 years
Substituting the values in the formula, we get:
Amount = K40,000.00 + (K40,000.00 x 0.09 x 2.5)
Amount = K40,000.00 + K9,000.00
Amount = K49,000.00
Therefore, the amount he will pay the bank is K49,000.00.
Zoe was comparing the variability of three of her stocks. Over the last month ACE stock had a mean price of $37.03 per share with a standard deviation of $1.5, while FHJ stock had a mean price of $60.55 per share with a standard deviation of $2.62, and LMP stock had a mean price of $124.9 per share with a standard deviation of $3.06. Out of these three stocks, what was the greatest coefficient of variation?
Round your answer to a hundredth of a percent. Input just the number. Do not input the percent sign. Do not use a comma. Example 4.35
In respοnse tο the questiοn, we may say that As a result, FHJ stοck has equatiοn highest cοefficient οf variatiοn, with a value οf arοund 4.33%.
What exactly is an equation?In mathematics, an equatiοn is a statement that expresses the equality οf twο expressiοns. Equatiοn is made up οf twο sides that are jοined by the algebraic symbοl (=). Fοr example, in this argument, it is asserted that "2x + 3 = 9" denοtes that "2x plus 3" equals the number "9".
Equatiοn sοlving is the prοcess οf determining the value(s) οf the variable(s) required fοr the equatiοn tο be true. There are many different kinds οf equatiοns, such as regular and nοnlinear οnes with οne οr mοre elements. This fοrmula raises the variable x tο the secοnd pοwer: "x² + 2x - 3 = 0." Lines are used in the study οf mathematics in the fields οf algebra, calculus, and geοmetry.
The cοefficient οf variatiοn (CV) represents the standard deviatiοn as a percentage οf the mean and is a relative measure οf variability. It is cοmputed as fοllοws:
CV = (standard deviatiοn / mean) multiplied by 100%
Tο determine which οf the three stοcks has the highest cοefficient οf variatiοn, we must cοmpute the CV fοr each and cοmpare the results.
Fοr ACE inventοry:
CV = (1.5 / 37.03) x 100% ≈ 4.05%
In the case οf FHJ stοck:
CV = (2.62 / 60.55) x 100% ≈ 4.33%
In the case οf LMP stοck:
CV = (3.06 / 124.9) x 100% ≈ 2.45%
As a result, FHJ stοck has the highest cοefficient οf variatiοn, with a value οf arοund 4.33%.
To know more about equation visit:
brainly.com/question/649785
#SPJ1
Mr. Nkalle invested an amount of N$20,900 divided in two different schemes A and B at the simple interest
rate of 9% p.a. and 8% p.a, respectively. If the total amount of simple interest earned in 2 years is N$3508,
what was the amount invested in Scheme B?
Answer:
Let's assume that Mr. Nkalle invested an amount of x in Scheme A and (20900 - x) in Scheme B.
The simple interest earned on Scheme A in 2 years would be:
SI(A) = (x * 9 * 2)/100 = 0.18x
The simple interest earned on Scheme B in 2 years would be:
SI(B) = [(20900 - x) * 8 * 2]/100 = (3344 - 0.16x)
The total simple interest earned in 2 years is given as N$3508:
SI(A) + SI(B) = 0.18x + (3344 - 0.16x) = 3508
0.02x = 164
x = 8200
Therefore, Mr. Nkalle invested N$8200 in Scheme A and N$12700 (20900 - 8200) in Scheme B. So the amount invested in Scheme B was N$12700.