HELPPP PLEASEEEEE
Name the following alkane molecule:

Answer:

The empirical formula is, C4H4S

Explanation:

Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles

Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g

Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles

Mass of hydrogen = 0.025 moles × 1 = 0.025 g

Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles

Mass of sulphur= 0.0064 moles ×32 = 0.2 g

Now we obtain the mole ratios by dividing through by the lowest ratio.

C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles

C4H4S

Answer: In order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.

Explanation:

More is the concentration of reactant molecules more will be the number of collisions between their molecules. As a result, more readily the products will be formed.

Hence, for the given reaction when concentration of HCl is increased then there will be increase in the number of collisions between reactants.

Thus, we can conclude that in order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

Explanation:

Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support

Answer:

Examples. Glucose (C6H12O6), ribose (C5H10O5), Acetic acid (C2H4O2), and formaldehyde (CH2O) all have different molecular formulas but the same empirical formula: CH2O.

Explanation:In chemistry, the empirical formula of a chemical compound is the simplest positive integer ratio of atoms present in a compound.

Answer:

Light can be treated like particles because it is made of chunks like things called protons.

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

We input the given data:

And solve for n:

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

Answer: el texto no es tan claro

Answer:

ee = 96%

Explanation:

Enantiomeric excess, ee, is a way to express a mixture that is not enantiomerically pure. It is defined as 100 times the ratio between the  differences of amounts of enantiomers and the total amunt. that is:

ee = |A-B|/ A+B * 100

ee = |98%-2%| / 98+2 * 100

Answer:

Phenols do not exhibit the same pka values as other alcohols;

They are generally more acidic.

Using the knowledge that hydrogen acidity is directly related to the stability of the anion formed, explain why phenol is more acidic than cyclohexane.

Explanation:

According to Bromsted=Lowry acid-base theory,

an acid is a substance that can release [tex]H^{+}[/tex] ions when dissolved in water.

So, acid is a proton donor.

If the conjugate base of an acid is more stable then, that acid is a strong acid.

In the case of phenol,

the phenoxide ion formed is stabilized by resonance.

[tex]C_6H_5OH -> C_6H_5O^- +H^+[/tex]

The resonance in phenoxide ion is shown below:

Whereas in the case of cyclohexanol resonance is not possible.

So, cyclohexanol is a weak acid compared to phenol.

Answer:

Research that releases a poisonous gas into the air.

Explanation:

Since I don't know the options I will guess it is ^

answer is 2546 h

mark me as Branliest

Answer:

-713 kJ

Explanation:

Step 1: Write the balaned thermochemical equation

4 NH₃(g) + 3 O₂(g) → 2 N₂(g) + 6 H₂O(g)  ΔΗ = -1267 kJ

Step 2: Calculate the moles corresponding to 38.4 g of NH₃

The molar mass of NH₃ is 17.03 g/mol.

38.4 g × 1 mol/17.03 g = 2.25 mol

Step 3: Calculate the  enthalpy change to burn 2.25 mol of ammonia

According to the thermochemical equation, 1267 kJ are released per 4 moles of ammonia that react.

2.25 mol × (-1267 kJ/4 mol) = -713 kJ

Answer:

Explanation: hell noo

Answer:

6.33×10¯²² g

Explanation:

From the question given above, the following data were obtained:

Number of atoms = 6 atoms

Mass of copper (Cu) =?

From Avogadro's hypothesis, we understood that:

6.02×10²³ atoms = 1 mole of Cu

But 1 mole of Cu = 63.5 g

Thus,

6.02×10²³ atoms = 63.5 g of Cu

Finally, we shall determine the mass of 6 atoms of copper. This can be obtained as illustrated below:

6.02×10²³ atoms = 63.5 g of Cu

Therefore,

6 atoms = (6 × 63.5) / 6.02×10²³

6 atoms = 6.33×10¯²² g of Cu

Therefore, the mass of 6 atoms of copper is 6.33×10¯²² g.

Equilibrium shifts to the right.

OPTION A

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.

HOPE IT HELPS❤️

Answer:

154 g

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP

At STP, 1 mole of N₂ occupies 22.4 L.

79.5 L × 1 mol/22.4 L = 3.55 mol

Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂

The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.

Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃

The molar mass of NaN₃ is 65.01 g/mol.

2.37 mol × 65.01 g/mol = 154 g

Answer:

ethyl ethanoate and water

Explanation:

At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.  

Ethyl liquor and water are two miscible fluids.   Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.

The answer is ethyl ethanoate and water. Hope this helps you!

Answer:

The correct answer is - A. ammonia blue.

Explanation:

It is given that there is a mixture of ammonium chloride and sodium hydroxide and if we heat the  Mixture of NH4Cl and NaOH then, the following reaction will take place-

NH4Cl (aq)+ NaOH (aq)==> NaCl (aq) + NH3 (g)+ H2O (l)

In this reaction, there is a release of NH3 gas which is absorbed on litmus paper. We know that NH3 gas is basic in nature and so it will turn litmus paper blue.

Thus, the correct answer would be - NH3 (ammonia ) and Blue

Answer:

Explanation:

Both extraction and wash are technical materials separation processes. Both seek to carry out a separation of liquid-liquid, through the relationship between solvent and solute present in this solution. Both use a separation funnel and are very similar processes where the main difference is the purpose that each one seeks to exercise. The extraction causes the dissolution of the material that the researcher wants to leave behind. this process leaves impurities in the initial solution layer and moves the researcher's desired compound to the second layer of solution. A chemical reaction can take place during this process.

A wash, on the other hand, dissolves all impurities from the solution and extracts the compound desired by the researcher. Therefore, we can conclude that during this process the impurities are moved from one layer to another in the solution until it is discarded from the funnel, leaving the desired compound in the initial layer.

Answer:

Decrease temperature or reduce pressure

Answer:

128.4 g

Explanation:

Step 1: Given data

Step 2: Determine the total mass of the sample

The mass percent of element X in X(NO₃)₂ is 52.55%, that is, there are 52.55 g of X every 100 g of X(NO₃)₂. Then, the mass of X(NO₃)₂ that contains 67.50 g of X is:

67.50 g X × 100 g X(NO₃)₂/52.55 g X = 128.4 g X(NO₃)₂

Answer:

Explanation:

Hope this helps

Answer:

solo I

Explanation:

Según esta teoría para que se produzca una reacción deben cumplirse tres condiciones: Las moléculas de los reactivos tienen que chocar entre sí. Estos choques deben de producirse con energía suficiente de forma que se puedan romper y formar enlaces químicos.

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

Finally we calculate the required mL of suspension, using its concentration: