Answer:
potential and chemical
Explanation:
When the gravimeter was invented.
Answer:
it was invented in 1960
Explanation:
it was descibed as a wooden instrument ideally suited for gravity programmes in areas of limited latitude and temperature variations
Calculate the molarity of the following solution: 1.0 mole of KCl in .75 L of solution.
1.3 M
2.0 M
0.750 M
99 M
Answer:
1.3 M
Explanation:
1 mole= Concentration * Volume
1 mole=C*0.75 L
C=1.3 M
HELPPPP pleaseeeeee!!!!
Answer:
Length=Meter
Mass=Kilogram
Time=Second
Explanation:
Si is the International System of Units and means not just the U.S metric system.
Hope this helps and Please mark as Brainliest
Calculate the pressure kPa of 0.421 mole of helium gas at 254 degree celsius when it occupies a volume of 3.32 L.
1. A light bulb is filled with 3.54 g of argon at 25 C and 725 mmHg. What is
the volume of this gas?
Answer: The volume of given gas is 2.27 L.
Explanation:
Given: Mass = 3.54 g
Temperature = [tex]25^{o}C[/tex] = (25 + 273) K = 298 K
Pressure = 725 mm Hg (1 mm Hg = 0.00131579) = 0.95 atm
As moles is the mass of substance divided by its molar mass.
So, moles of argon (molar mass = 40 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{3.54 g}{40 g/mol}\\= 0.0885 mol[/tex]
Formula used to calculate the volume of given gas is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\0.95 atm \times V = 0.0885 mol \times 0.0821 L atm/mol K \times 298 K\\V = 2.27 L[/tex]
Thus, we can conclude that the volume of given gas is 2.27 L.
Question: What happens with the electrons between two atoms in a polar covalent bond?
a) Electrons are equally shared
b) Electrons are transferred
c) Electrons are unequally shared
d) Electrons become mobile in a ‘sea of electrons’
Answer:
c) Electrons are unequally shared
How much mass does 1 mol of O2 gas have?
O A. 16.00 x 2g
O B. 16.00 x (6.02 x 10^23) g
C. 2 x (6.02 x 10^23) g
D. 16.00 g
Answer:
Option A.
Explanation:
1 mol of anything contains 6.02×10²³ particles.
We know that 1 mol of oxygen gas contains 2 moles of O.
1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.
By the way, the mass for 1 mol of O₂ may be:
Option A → 16 g/mol . 2 mol
32 g
Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.
Another example can be:
1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.
How many moles of aluminum oxide are produced when 6 moles of oxygen gas react?
4Al + 3O2 → 2Al2O3
Answer:
4 moles of aluminum and 6 moles of oxygen are produced
Help needed asap, I will mark the brainiest tomorrow after homework is graded (PLEASE NOT FUNNY BUSINESS)
Answer:
Oh my gosh
dis one pass me
please help mee 11-14
Answer:
11. A)outward
12. B) inward
13. B) opaque
14. I really don't know (sorry)
Explanation:
Se realiza una mezcla de minerales de Cu y Fe: 20 kg FeS2 (pirita), 70 kg de Fe2O3 (hemetita) 15 kg de CuFe2 (calcopirita) y 90 kg de CuO (tenorita). Calcule: Porcentaje de hierro Porcentaje de cu Porcentaje de azufre y oxigeno
Answer:
34.78% Fe
39.66% Cu
5.48% S
20.07% O
Explanation:
Para resolver esta pregunta debemos hallar la masa de cada átomo en cada mineral. Así, podremos hallar el porcentaje de cada átomo:
Pirita (Fe: 55.845g/mol; S: 32.065g/mol; FeS2: 119.975g/mol)
Masa Fe:
20kg FeS2 * (1*55.845g/mol / 119.975g/mol) = 9.31kg Fe
Masa S:
20kg FeS2 * (2*32.065g/mol / 119.975g/mol) = 10.69kg S
Hemetita (Fe: 55.845g/mol; O: 16g/mol; Fe2O3: 159.688g/mol)
Masa Fe:
70kg Fe2O3 * (2*55.845g/mol / 159.688g/mol) = 48.96kg Fe
Masa O:
70kg Fe2O3 * (3*16g/mol / 159.688g/mol) = 21.04kg O
Calcopirita (Fe: 55.845g/mol; Cu: 63.546g/mol; CuFe2: 175.236 g/mol)
Masa Fe:
15kg CuFe2 * (2*55.845g/mol / 175.236 g/mol) = 9.56kg Fe
Masa Cu:
15kg CuFe2 * (1*63.546g/mol / 175.236 g/mol) = 5.44kg Cu
Tenorita (O: 16g/mol; Cu: 63.546g/mol; CuO: 79.545 g/mol)
Masa O:
90kg CuO * (1*16g/mol / 79.545 g/mol) = 18.10kg O
Masa Cu:
90kg CuO * (1*63.546g/mol / 79.545 g/mol) = 71.90kg Cu
Masa Total: 20kg + 70kg + 15kg + 90kg = 195kg
Porcentaje Hierro:
9.31kg Fe + 48.96kg Fe + 9.56kg Fe / 195kg * 100 =
34.78% Fe
Porcentaje Cobre:
5.44kg Cu + 71.90kg Cu / 195kg * 100 =
39.66% Cu
Porcentaje Azufre:
10.69kg S / 195kg * 100 =
5.48% S
Porcentaje Oxígeno:
21.04kg O + 18.10kg O/ 195kg * 100 =
20.07% O
A certain element has two naturally occurring isotopes. The atomic mass of isotope 1 (35.4723 % natural abundance) is 184.9529 amu. Determine the atomic mass of isotope 2. The average atomic mass of the element is 186.2071 amu. Do not include units; report answer to 4 decimal places.
Answer:
the value
Explanation:
What is the IUPAC name of linkage isomer of [(NH3)3Pt(NO2)]Cl ? (remember it's linkage isomer)
triamminechloroplatinum(II) nitrite
any artist out there?
I need help knowing what colors I should use for a painting.
you can explain your question i can help if i know it
Answer:
You could use red, blue, yellow, white, black, brown, green, orange, purple
Other useful colors:
Payne grey
Yellow or golden ocher
Titanium buff or raw titanium
Explanation:
Consider the reaction 4FeS2 + 11O2 → 2Fe2O3 + 8SO2. If 8 moles of FeS2 react with 15 moles of O2, what is the limiting reactant? (3 points)
Select one:
a. FeS2
b. Fe2O3
c. O2
d. SO2
If 8 moles of FeS2 react with 15 moles of O2, the limiting reactant is O2.
WHAT IS LIMITING REACTANT:A limiting reactant is reactant that is totally consumed when the chemical reaction is completed.According to this question, the following reaction was given: 4FeS2 + 11O2 → 2Fe2O3 + 8SO2.4 moles of FeS₂ reacts with 11 moles of O₂
This means, 8 moles of FeS₂ will react with (8 × 11/2) = 22 moles of O₂15 moles of O₂ is available. In comparison with 22 moles, O₂ is in short supply .
Therefore, If 8 moles of FeS2 react with 15 moles of O2, O₂ is the limiting reagent.
Learn more about limiting reactant at: https://brainly.com/question/14225536
Answer:
They are right it's O2
Explanation:
I accidently rated it low but it's 100% right
Write the electron configuration for Gold (Au). You may choose to write it in the long form or in the noble gas configuration form (shortcut).
Answer:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s¹4f¹⁴5d¹⁰
Explanation:
Angiosperms produce brightly colored blooms and sweet-smelling flowers. Why have angiosperms developed these adaptations? A. to ensure seed dispersal B. to keep predators from eating the plants C. to attract pollinators and help ensure fertilization D. to allow time for seed development
Answer:
C
Explanation:
Angiosperms have developed these adaptations because it attracts pollinators which helps the ecosystem grow.
What is used to describe the conditions of a reaction at equilibrium?
O A. A reaction-rate constant
O B. An activation energy
O C. An ideal gas constant
O D. An equilibrium constant
SUBM
help chemistry pls answer
How do you find the number of moles of copper in copper gluconate? In my experiment I used 1.4 g of copper gluconate, and ended up with 0.1 g of copper.
Answer: 0.0016 moles of copper are present in copper gluconate
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of copper = 0.1 g
Molar mass of copper = 63.55 g/mol
Plugging values in equation 1:
[tex]\text{Moles of copper}=\frac{0.1g}{63.55g/mol}=0.0016 mol[/tex]
Hence, 0.0016 moles of copper are present in copper gluconate
the structure of carbon dioxide using dots and crosses
Answer:
on image
Explanation:
2. When we lift a stool, its ____________
A) gravitational potential energy is increased
B) gravitational potential energy is decreased
C) kinetic energy is decreased
D) gravitational potential energy remains unchanged
A.)
Standing on an elevated ledge would be more potential energy than standing on the ground. Same applies for anything else -- Including a chair!
Which of the following is the best definition of nuclear fission?
O A. Nuclear fission is the joining of two or more nuclei into one
nucleus.
B. Nuclear fission is the formation of new isotopes through a gain of
electrons.
C. Nuclear fission is the splitting of a nucleus into two or more
nuclei.
O D. Nuclear fission is an exothermic reaction between two stable
nuclei.
Answer:
C
Explanation:
Nuclear fission is a process where the nucleus of an atom is split into two or more smaller nuclei, known as fission products.
Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , therefore option (c) is correct.
What do you mean by the nuclear fission ?Nuclear fission is a process in which an unstable nucleus splits into two nuclides and emits neutrons.
The fission process often produces free neutrons and photons and releases a large amount of energy. Therefore , nuclear fission is either a nuclear reaction or a radioactive decay process.
The fission process often produces gamma radiations , and releases a very large amount of energy .
Nuclear fission is the splitting of a nucleus into two or more nuclei defines best of nuclear fission among the following , hence option (c) is correct.
Learn more about nuclear fission , here:
https://brainly.com/question/14899304
#SPJ2
PLEASE HELP SOMEONE !!!!!!!!!!!!!!!!!!!
Answer:
sodium
Explanation:
sodium has 11 electrons.
[tex]what \: is \: acid \: \: \: {?} [/tex]
meaning:An acid is a chemical substance, usually a liquid, which contains hydrogen and can react with other substances to form salts. Some acids burn or dissolve other substances that they come into contact with.
Answer:
Hope it help you#CarryOnLearningWhich of the following is a correct statement about water?
A)Hydrogen bonding causes water to be strongly cohesive.
B)Hydrogen bonding causes water to have a low surface tension.
C)Water is a universal solvent because polar and nonpolar solutes can dissolve in it.
D) Water is less dense as a liquid than as a solid because of changes in bond structure.
Answer:
D) Water is less dense as a liquid than as a solid because of changes in bond structure.
Explanation:
I hope I was able to help!
Have a nice day :)
The correct statements about water is that hydrogen bonding causes water to be strongly cohesive and is less dense as a liquid and solid.
What is hydrogen bonding?It is bonding in between the hydrogen atom and most electronegative atoms like flourine, chlorine, oxygen atoms, etc.
In water molecule hydrogen bonding is present in the form of intermolecular as well as intramolecular force and makes it more cohesive to get attracted towards each other.Water molecule has a high surface tension, as a result of which it is able to form a drop of water.Water is not a universal solvent, else it is a polar solvent and able to dissolve only polar molecules.It is also true that water is less dense as a liquid than as a solid because of changes in bond structure.Hence water is less dense as a liquid than as a solid because of changes in bond structure and hydrogen bonding causes water to be strongly cohesive.
To know more about water, visit the below link:
https://brainly.com/question/18681949
What is the mass of 10.5 moles of H20?
Answer:
180g
Explanation:
So, 10 mole of water will weigh (18x10) = 180g.
Why is it important for scientist to be repeatable?
Answer:
It is important for scientists to be repeatable so it lets them see patterns and trends in their results. This is affirmative for their work, making it stronger and better able to support their claims. This helps maintain The integrity of data.
Repeating an experiment more than once helps determine if the data was a fluke, or represents the normal case. It helps guard against jumping to conclusions without enough evidence. The number of repeats depends on many factors, including the spread of the data and the availability of resources
Explanation:
which of these elements has two valence electrons?
a. hydrogen (H)
b. barium (Ba)
c. nitrogen (N)
d. krypton (Kr)
e. bromine (Br)
Which organisms release carbon dioxide into the air (abiotic matter) in an ecosystem?
only producers
only decomposers
only consumers
producers, consumers, and decomposers
Answer:
All 3
Explanation:
Decomposers break apart complex organic materials into more elementary substances: water and carbon dioxide, plus simple compounds containing nitrogen, phosphorus, and calcium. All of these components are substances that plants need to grow.
Some decomposers are specialized and break down only a certain kind of dead organism. Others are generalists that feed on lots of different materials. Thanks to decomposers, nutrients get added back to the soil or water, so the producers can use them to grow and reproduce.
