Help plz????????? Giving out Brainly

Help Plz????????? Giving Out Brainly

Answers

Answer 1

Answer:

Answer should be (B)

Explanation:

If the forces on an object are balanced (or if there are no forces acting on it), this is what happens: a stationary object stays still. a moving object continues to move at the same speed and in the same direction.

ALSO: forces acting upon an object are balanced, then the object will maintain its state of motion. To maintain the state of motion is to keep the current speed and direction. But if the forces are not balanced, the object will change its state of motion.


Related Questions

Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?

Answers

The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N

The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.

According to Newton's second Law;

Force = (Tension) = mass × acceleration due to gravity

We can say:

Tension = 4kg × 9.81 m/s²

Tension = 39.24 N

Tension = 40 N (to the nearest whole number)

Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N

Learn  more about Newton's Law here:

https://brainly.com/question/3715235?referrer=searchResults

What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission

Answers

Answer:

Absorption

Explanation:

the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.

Tommy does 45 Joules of work to push the pencil over 3 meter. How much force did he use?

Answers

Answer:

Work = Force × Distance

Therefore Force = Work/Distance

= 45 joules/3 metres

= 15 newton

Explanation:

Answer:

15

Explanation:

15

Compare the amplitude of these waves.

Answers

Answer:

a smooth

b less smooth

c faster

d faster than fast c

e to fast for fast

Explanation:

The ______ of Saturn vary in thickness and are composed of icy chunks ranging in size from sand to boulders (and even larger).

Answers

Answer:

"rings" - viewed from a distance, Saturn appears to be surrounded by rings

a water skier has a mass of 80 kg and accelerates at 2 m/s2. What is the net force(F) acting on him?

Answers

Answer:

160 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question

mass = 80 kg

acceleration = 2 m/s²

We have

force = 80 × 2 = 160

We have the final answer as

160 N

Hope this helps you

What is the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod

Answers

Answer:

C) 5ML^2

Explanation:

2 Spheres of mass M

Bug's mass 3M

Rod length 2L, radius L

Find Rotational Inertia I

I=Σmr^2

I=(3M+M+M)L^2

I=5ML^2

The rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².

Rotational inertia of the system

The rotational inertia of the system is determined by summing all the masses together and multiply with the radius.

I(t) = Σmr²

Where;

m is the massr is the radius

I(t) = Inertia of the 2 spheres + inertia of the bug

I(t) = (M + M)L²  + (3M)L²

I(t) = 2ML² + 3ML²

I(t) = 5ML²

Thus, the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².

Complete question is below:

There are 2 Spheres of mass M and Bug's mass 3M. The Rod length is 2L, radius L.

Learn more about rotational inertia here: https://brainly.com/question/14001220

Where does the energy released in a nuclear decay reaction come from

A. Electrons

B. Chemical bonds

C. Positrons

D. The binding energy of the nucleus

Answers

The answer is positrons

How does water temperature affect density?

Answers

it expands, increasing in volume. The warmer the water, the more space it takes up, and the lower its density.

Se aplican dos fuerzas concurrentes a un objeto de 4N a la derecha y 5N a la izquierda. ¿Hacia donde se movió y con cuanta fuerza?

Answers

The forces move strongly towards the left by 1N

Given the following

Force towards the right = 4N

Force towards the left = 5N

Note that the force acting towards the left is negative, hence the force acting towards the left is -5N

Take the sum of force

Resultant force = -5N + 4N

Resultant force = -1N

This shows that the forces move strongly towards the left by 1N

Learn more here: https://brainly.com/question/24629099

How much force is required to move a tractor 60m, when using 250J of work?

Answers

Answer:

Work done,W= 250J

Displacement , s = 60

We know that, Work done = Force x displacement

i.e , W = Fxs

250 J = F x 60m

F = 250/60

=4.16 N

Hence , 4.16 N of Force is applied on the body.

Please find attached photograph for your answer.

Hope it helps.

Do comment if you have any query.

Hello everyone, I just want to know the formula to solve this problem:

What is the speed of sound at 62°C?

and how to solve this kind of problem? My brain isn't working.. :)​

Answers

Answer:

367 m/s

Explanation:

Use simplified formula:

[tex]v=331.3\sqrt{1+T/273.15}[/tex] , where T- temperature in Celsius

How do energy transformations occur in a hydroelectric plant?


The potential energy of water is converted to mechanical energy by a turbine.


The kinetic energy of water is converted by a dam into potential energy.


The kinetic energy of water is converted by a generator into electric energy.


The potential energy of water is converted by a transformer into electric energy.

Answers

Answer:

The answer is #3: The kinetic energy of water is converted by a generator into electric energy.

Explanation:

Hydropower plants capture the energy of falling water to generate electricity. A turbine converts the kinetic energy of falling water into mechanical energy. Then a generator converts the mechanical energy from the turbine into electrical energy.

You find a rock that is about 20 grams large. This rock contains about 10 grams of Uranium-235 and 10 grams of the element it decays into (Thorium-231). The half life of Uranium-235 is 700 million years. How old is this rock?

Answers

The age of the given rock is 700 million years.

The given parameters;

original mass of the rock, = 20 gmass of the rock remaining after decay, = 10 ghalf life of Uranium, [tex]t_{1/2}[/tex] = 700 years

age of the rock ----------------------------- mass remaining

0 [tex](t_0)[/tex]  -------------------------------------------  20 g

1 half life ([tex]1 \ t_{1/2}[/tex] ) ------------------------------ 10 g

Age of the rock [tex]= t_{1/2} - t_0 = 700 \ - 0 = 700 \ million \ years[/tex]

Thus, the age of the given rock is 700 million years.

Learn more here:https://brainly.com/question/23774743

When the sum of all the forces acting on a block.

Answers

Answer:

finish the question pls

Explanation:

Guys plz i need those answers as soon as possible

Answers

9) a) formula = h(ρ)g by default g=9.8m/s²

Pressure = 2×1000×9.8 = 19600Pa

b)

If a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s, what is the velocity of the person as seen by someone not moving (watching the train going by)
A-45 m/s North
B-50 m/s South
C-55 m/s North
D-100 m/s South ​

Answers

The velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South. I can therefore conclude that none of the option given is correct.

Given that a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s.

That means the person is running relatively to the velocity of the train. Since the train and the person are moving in the same direction, the relative velocity seen by an observer watching the train going will be the addition of both the train and the person in the direction of the train.

That is,

Relative velocity = 50 + 5

Relative velocity = 55 m/s South.

Therefore, the velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South.

I can therefore conclude that none of the option given is correct.

Learn more here: https://brainly.com/question/14636414

a metal wire has a resistance of 13.00 at a temperature of 25.0 degree celsius

Answers

Explanation:

what exactly are you asking for?

A football player kicks the ball with an initial velocity of 28.3 m/s at an angle of 60° above the horizontal. The ball is in the air for a total of 5.00 s before hitting the ground. Ignoring air resistance, what would be the ball's horizontal displacement?

Answers

Hi there!

Since the ball is directed 60° above the horizontal, we must use its HORIZONTAL component to find its displacement.

We can take the cosine to do so:

vcosθ = 28.3cos(60) = 14.15 m/s

Since the ball is in the air for 5 sec, we can use the following equation:

displacement = velocity · time (d = vt)

Plug in the values:

d = 14.15 · 5 = 70.75 m

2. What are the challenges of wind energy that causes decrease in the electrical production?
3. Give two solutions:
1. Modification in the structure of the turbine
2. Modification in the function of the turbine.

4. You must estimate the cost in each solution, and which one is more affordable and efficient for the municipality to go for.

5. You must make sure that there is minimal energy loss.

Answers

Levelized production cost is a big challenge in the production of wind energy.

The main challenge in the production of wind energy is the high production cost. It has to minimize the Levelized Production Cost (LPC) which is the ratio between energy production cost and economic lifetime. This problem can be solved by doing modification in the structure of the turbine as well as we must ensure minimal energy loss.

The modification in the structure can produce more electrical energy and reduce the energy loss also provides more profit to the company so we can conclude that levelized production cost is a big challenge in the production of wind energy.

Learn more: https://brainly.com/question/25543609

in order to have beef becomes tender she will use

Answers

Answer:

you

Explanation:

you will be used is this frl?

I am confused but you do you buddy

A guitar string has a fundamental frequency f. The tension in the string is increased by 1.70%. Ignoring the very small stretch of the string. How does the fundamental frequency change?

Answers

The characteristics of the speed of the waves in strings and the resonance allows to find the change in the fundamental frequency when changing the tension is:

 The change in fundamental frequency is: f = 1.08 f₀

The speed of the chord wave is given by the relationship between the tension and the density of the medium.

          [tex]v= \sqrt{\frac{T}{\mu } }[/tex]  

Where v is the velocity of the wave, T the tension of the string and μ the density

In a rope held at the ends, a process of standing waves occurs, two at the point where it is attached we have a node and a anti-node in the center.

             2L = n λ

Where L is the length of the chord and call the wavelength

Wave speeds are related to wavelength and frequency.

        v = λ f

We substitute.

            [tex]\sqrt{\frac{T}{\mu } } = \frac{2L}{n} \ \ f[/tex]  

For the fundamental frequency n = 1

            f₀ = [tex]f_o = \sqrt{\frac{T}{\mu } } \ \ \frac{1}{2L}[/tex]  

They indicate that the tension increases 1.70%

           T = T₀ + 0.17 T₀

           T = 1.17 T₀

We substitute.

         [tex]f = \sqrt{1.17 } \ \sqrt{\frac{T_o}{\mu } } \ \ \frac{1}{2L}[/tex]

         f = ra1.17 f₀

         f = 1.08 f₀

In conclusion, using the characteristics of the velocity of the waves in strings and the resonance we can find the change in the fundamental frequency when changing the tension is:

 The change in fundamental frequency is: f = 1.08 f₀

Learn more about string resonance here: brainly.com/question/16010929

helpp I'll give brainliest smth
Why there has to be a driving force to keep the car moving at a constant speed?​

Answers

Explanation:

For example, when a car travels at a constant speed, the driving force from the engine is balanced by resistive forces such as air resistance and friction in the car's moving parts. ... an object falling at terminal velocity experiences the same air resistance as its weight.

Using your outline and the materials you’ve gathered, write a 500- to 750-word paper using word processing software. Be sure to proofread and revise your writing to catch any errors in grammar, spelling, logic, or organization. Add a works cited page at the end to give credit to your sources. Submit your completed paper along with this activity to your teacher for evaluation.

please do it based off of Werner Heisenberg the scientist.

Answers

Answer:

im half new how does this work

Explanation:

Answer:Werner Heisenberg was born on 5th December, 1901, at Wurzburg. He was the son of Dr. August Heisenberg and his wife Annie Wecklein. His father later became Professor of the Middle and Modern Greek languages in the University of Munich. It was probably due to his influence that Heisenberg remarked, when the Japanese physicist Yukawa discovered the particle now known as the meson and the term “mesotron” was proposed for it, that the Greek word “mesos” has no “tr” in it, with the result that the name “mesotron” was changed to “meson”.Heisenberg went to the Maximilian school at Munich until 1920, when he went to the University of Munich to study physics under Sommerfeld, Wien, Pringsheim, and Rosenthal. During the winter of 1922-1923 he went to Göttingen to study physics under Max Born, Franck, and Hilbert. In 1923 he took his Ph.D. at the University of Munich and then became Assistant to Max Born at the University of Göttingen, and in 1924 he gained the venia legendi at that University.From 1924 until 1925 he worked, with a Rockefeller Grant, with Nlels Bohr, at the University of Copenhagen, returning for the summer of 1925 to Göttingen.In 1926 he was appointed Lecturer in Theoretical Physics at the University of Copenhagen under Nlels Bohr and in 1927, when he was only 26, he was appointed Professor of Theoretical Physics at the University of Leipzig.In 1929 he went on a lecture tour to the United States, Japan, and India.In 1941 he was appointed Professor of Physics at the University of Berlin and Director of the Kaiser Wilhelm Institute for Physics there.At the end of the Second World War he, and other German physicists, were taken prisoner by American troops and sent to England, but in 1946 he returned to Germany and reorganized, with his colleagues, the Institute for Physics at Göttingen. This Institute was, in 1948, renamed the Max Planck Institute for Physics.In 1948 Heisenberg stayed for some months in Cambridge, England, to give lectures, and in 1950 and 1954 he was invited to lecture in the United States. In the winter of 1955-1956 he gave the Gifford Lectures at the University of St. Andrews, Scotland, these lectures being subsequently published as a book.During 1955 Heisenberg was occupied with preparations for the removal of the Max Planck Institute for Physics to Munich. Still Director of this Institute, he went with it to Munich and in 1958 he was appointed Professor of Physics in the University of Munich. His Institute was then renamed the Max Planck Institute for Physics and Astrophysics.

I will give a 5-star answer and Brainlest
Direct contact is necessary for which type of energy transfer?
A. Conduction
B. Sound Waves
C. Convection
D. Radiation

Answers

Answer:

D

Explanation:

 

Which colour of light is refracted more by a prsim green or blue.explain​

Answers

Answer:

The light waves are refracted as they enter and leave the prism. The shorter the wavelength of the light, the more it is refracted. As a result, red light is refracted the least and violet light is refracted the most - causing the coloured light to spread out to form a spectrum.

Explanation:

hope this helps

Answer: Neither, its actually violet aka purple. This is because it has the shortest wavelength. This is also why red light is refracted the least because it has the longest wavelength.

Would appreciate brainly <3

Where could light travel the easiest and fastest?

A) through air
B) through empty space
C) through liquid hydrogen

Answers

Explanation:

Light travels fastest through air

Answer:

try through air

Explanation:

A crane lifts a 10000 N load through a distance of 30mins in 40s calculate work done

Answers

Given,

Force = 10,000 N

Distance = 30 m

Time = 40 s

Work done = force × distance

Work = 10,000 × 30

Work = 300,000 J

______

꧁✿ ᴿᴬᴵᴺᴮᴼᵂˢᴬᴸᵀ2222 ✬꧂

The work done on the object is equal to the power it experiences which is equal to 735 watts.

What is work done?

Work done is defined as the product of force applied and the distance over which the force is applied on the object. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.

The time rate of doing work is called as power, which is designated by the symbol P. It is measured in the units of watts, where one watt is equal to one joule energy applied per second time.

Work done on an object is equal to the force (F) multiplied by the distance d in the direction of the force. Where, time interval is Δt.

P = W/Δt = F × d/Δt = m × g × h/Δt = 100 × 9.8 × 30 / 40

Power = 735 watts

The power of the object is 735 watts.

Learn more about Work done here:

https://brainly.com/question/13662169

#SPJ2

why do we believe 90 percent of the mass of the milky way is in the form of dark matter?

Answers

Answer:

The orbital speeds of stars far from the galactic center are surprisingly high, suggesting that these stars are feeling gravitational effects from unseen matter in the halo.

An irregularly shaped stone was lowered into a graduated cylinder holding a volume of water equal to 20L. The height of water rose to 30.2mL. If the mass of the stone was 25g what was its density?

Answers

Answer:

2.45 g/mL

Explanation:

(assuming that the original volume was 20 mL and not L)

Since you know the amount of water in the cylinder before and after you placed the rock in, you can subtract them to get the volume of the rock itself. [tex]30.2-20=10.2[/tex] mL.

To get the rock's density, use the equation [tex]d=\frac{m}{v}[/tex], where m is mass and v is volume.

[tex]d=\frac{25 g}{10.2mL}\\\\d=2.45 g/mL[/tex]

Other Questions
Oranges cost 85 cents each.Leo has a $10 note.Work out the maximum number of oranges he can buy how many gigabytes is animal crossing new horizons Write a paragraph explaining why someone is helpful if they serve on a jury(i dont care if you dont do it i just need to get rid of some points) What city did the Ming dynasty build in 1368 what did it eventually become Type your response in the box.Look again at the map of North America in 1700. Based on what you just learned, how did the French and IndianWar redraw the boundaries of North America? Who lost territory and who gained territory? Also, what did the warmean for Oklahoma? Your answer should be 75-100 words in length.BIxFont Sizes 11 times 11 in binary . Help i need it today! How was new imperialism in the 19th century a result of industrialization in Europe? Why would the expansion of factory work and manufacturing lead to European nations scramble for territory in Africa and Asia? 4d=12 solve for the variable When testing the effect of light on flowering patterns of plants, temperature would be considered a?A.independent variableB. dependent variableC. constant Jazz developed in the African American communities of New Orleans and then quickly spread in the musical communities of St. Louis and Chicago. What conclusion can you draw from the spread of jazz?A. Jazz was prohibited in Eastern and Southern cities.B. Vibrant black communities in these cities adopted jazz.C. Jazz immediately began crossing racial barriers in these cities.D. Neither of these cities had radio stations on which to play jazz. Which of the following is a correct sequence of levels of organization from largest tosmallest? A. organ system, nervouse tissue, brainB. brain, organ system, nerve cell, nervous tissueC. organism, organ system, tissue, cell, organD. nervous system, brain, nervous tissue, nerve cell Weight-bearing exercise helps make bone stronger, because:there is no risk of fracture with exercise.exercise causes more calcium to enter the body.bone grows stronger in response to the stresses put on it.exercise triggers the expansion of epiphyseal plates. Three types of macromolecules are mentioned in the video that are digested and ABSORBED in the small intestine. What do they all get absorbed into first?LactealsEpithelial cells Capillaries Which of the following questions should you ask to help identify the main idea of a piece of writing?A) Who said this quotation?B) Where can I read more on this subject?C) Whats the point of this piece of writing?D) How long is this story or essay? What does the discriminant tell you. What is the length of the hypotenuse? If necessary, round to the nearest tenth. ____________ results from chemicals in car exhaust reacting with the sunlight.Acid RainContaminant fogSmogGreenhouse Effect The British philosopher John Locke believed in pantheism. What is pantheism?A. the idea that God granted salvation to the repentantB. the idea that God created a rational universeC. the idea that God exists in natureD. the idea that God does not exist g A long-term study has revealed that a test for cancer in men is very effective. The study shows that 89% of the men for which the test is positive actually have cancer. If a man selected at random tests positive for cancer with this test, what is the probability that he does not have cancer What does it mean to be marginalized.