HELP PLS!! ILL GIVE POINTS !! :(( m

Find the product of the complex numbers. Express your answer in
trigonometric form.
Z1 =5(cos15° + i sin 15°)
Z2=3(cos70° + i sin 70°)
A. 8(cos85° + isin85°)
B. 2 (cos(-55°) + i sin(-55°))
C. 2 (cos305° + i sin 305°)
D. 15(cos85° + i sin85°)

Answer:

5

Step-by-step explanation:

It is 5 because you just have to count by using a jumping math tectechnique.

Answer:

: = ÷

[tex]\frac{-2}{5}*\frac{6}{-1} : \frac{5}{-2} = \frac{-12}{-5} : \frac{5}{-2} = \frac{12}{5}*\frac{-2}{5}=\frac{-24}{25}[/tex]

An equivalent fraction is -24 over 25.

Answer:

B

Step-by-step explanation:

It opens downwards, so the parabola is negative. This also means the vertex of the parabola is the highest point, therefore it is a maximum.

For the equal distribution each child can take either 1 or 3 or 7 or 9 or 21 or 27 or 63 or 189 apple.

What is equal distribution?

The distribution of a something in a way that each will get same amount.

How 189 can be divided equally?

If the distribution is equally then each child should take, either 1 or 2 or 3 an so on means same amount.

For this we will check that 189 is divisible by which numbers.

Now we can see that 189 is divisible by 1, 3, 7, 9, 21, 27, 63, 189. It is clear that each child can take either 1 or 3 or 7 or 9 or 21 or 27 or 63 or 189 apple then the distribution will be equal means every child will have same amount of apple.

Therefore, the correct answer is 1, 3, 7, 9, 21, 27, 63, 189.

Learn more: https://brainly.ph/question/4734029

#SPJ2

Answer:

24

Step-by-step explanation:

There are 6 different types of rackets and 4 different types of balls.

To determine the number of different combinations

6 rackets * 4 balls

24 combinations

Answer:

24

Step-by-step explanation:

Answer:

Yo mean correct way??

yo can divide minute by 60 to convert minute into hour

For example

To convert 10 minute into hour. then we should divide 10 by 60. 10/60

Answer:

In any conversion you have to establish  ratios (or rates) for the different units being converted.

The process will be performed by a series of multiplications that will cancel out the "unwanted" units.

multiplication by one (1) does not change the value in an equation.

you have to multiply by a "series of ones" that take into account the units being converted..

for example  

1 minute/60 seconds   or  1 inch = 2.54 cm   or  1 day = 24 hours

in your problem you have minutes... lets say you have 100 minutes

100 minutes * 1 hour             minutes cancel and you have  100/60 = 1 [tex]\frac{2}{3}[/tex] hrs

                       60 minutes

Step-by-step explanation:

Answer:

5

Step-by-step explanation:

Use pythagorean theorem. A^2+B^2=C^2

13 is c because it is the hypotenuse and across from the right angle

a is unknown and b is 12

A^2+12^2=13^2

A^2 +144 = 169

A^2 = 169- 144

A^2= 25

now take the sq root of both side

A = 5

Answer:

17.7

Step-by-step explanation:

Answer:

(x,y) —> (–1 ,1)

I hope I helped you ^_^

Answer:

x = 960

Step-by-step explanation:

Using the Altitude- on- Hypotenuse theorem

( leg of large triangle )² = ( part of hypotenuse below it) × ( whole hypotenuse), so

x² = 576 × (576 + 1024) = 576 × 1600 = 921600 ( take square root of both sides )

x = [tex]\sqrt{921600}[/tex] = 960

Hey there!

Mode is basically the number(s) in a data plot you see MORE THAN once

• 18 appeared four times (this could be a possible answer)

• 17 appeared four times (this could be a possible answer)

• 19 appeared one time (this can’t be your answer)

• 20 appeared two times (this could be a possible answer)

Possible answers: 17,18, & 20

Since 17 & 18 appeared the MOST in the data plot those numbers could be your mode in your given data plot

Answer: 17 & 18

Good luck on your assignment and enjoy your day!

~Amphitrite1040:)

Answer:

B. XV and XY

Step-by-step explanation:

you can eliminate the top two options because those aren't rays. XV and XY are the only ones that end in X

Let

ATQ

[tex]\\ \qquad\quad\sf{:}\twoheadrightarrow 40x+50x=45000[/tex]

[tex]\\ \qquad\quad\sf{:}\twoheadrightarrow 90x=45000[/tex]

[tex]\\ \qquad\quad\sf{:}\twoheadrightarrow x=\dfrac{45000}{90}[/tex]

[tex]\\ \qquad\quad\sf{:}\twoheadrightarrow x=500[/tex]

Now

[tex]\\ \qquad\quad\sf{:}\twoheadrightarrow Rita=50x=50(500)=25000[/tex]

[tex]\\ \qquad\quad\sf{:}\twoheadrightarrow Mina=40x=40(500)=20000[/tex]

Answer:

Step-by-step explanation:

Answer:

Answer is option (B)......

Answer:

34 + 35 + 36 = 105

Step-by-step explanation:

Answer:

45

Step-by-step explanation:

9, 13, 17, 21, 25

We are adding 4 each time

9+4 = 13

13+4 =17

17+4 = 21

The common difference =4

a1 = 9

The formula is

an = a1+d(n-1) where n is the term number

an = 9+4(n-1)

We want the 10th term

a10 = 9+4(10-1)

     = 9+4(9)

    = 9+36

   = 45

Answer:

No answer is possible

Step-by-step explanation:

First, we can identify what the parabola looks like.

A parabola of form ax²+bx+c opens upward if a > 0 and downward if a < 0. The a is what the x² is multiplied by, and in this case, it is positive 2. Therefore, this parabola opens upward.

Next, the vertex of a parabola is equal to -b/(2a). Here, b (what x is multiplied by) is 1 and a =2, so -b/(2a) = -1/4 = -0.25.

This means that the parabola opens upward, and is going down until it reaches the vertex of x=-0.25 and up after that point. Graphing the function confirms this.

Given these, we can then solve for when the endpoints of the interval are reached and go from there.

The first endpoint in -2 ≤ f(x) ≤ 16 is f(x) = 2. Therefore, we can solve for f(x)=-2 by saying

2x²+x-4 = -2

add 2 to both sides to put everything on one side into a quadratic formula

2x²+x-2 = 0

To factor this, we first can identify, in ax²+bx+c, that a=2, b=1, and c=-2. We must find two values that add up to b=1 and multiply to c*a = -2  * 2 = -4. As (2,-2), (4,-1), and (-1,4) are the only integer values that multiply to -4, this will not work. We must apply the quadratic formula, so

x= (-b ± √(b²-4ac))/(2a)

x = (-1 ± √(1-(-4*2*2)))/(2*2)

= (-1 ± √(1+16))/4

= (-1 ± √17) / 4

when f(x) = -2

Next, we can solve for when f(x) = 16

2x²+x-4 = 16

subtract 16 from both sides to make this a quadratic equation

2x²+x-20 = 0

To factor, we must find two values that multiply to -40 and add up to 1. Nothing seems to work here in terms of whole numbers, so we can apply the quadratic formula, so

x = (-1 ± √(1-(-20*2*4)))/(2*2)

= (-1 ± √(1+160))/4

= (-1 ± √161)/4

Our two values of f(x) = -2 are (-1 ± √17) / 4 and our two values of f(x) = 16 are (-1 ± √161)/4 . Our vertex is at x=-0.25, so all values less than that are going down and all values greater than that are going up. We can notice that

(-1 - √17)/4 ≈ -1.3 and (-1-√161)/4 ≈ -3.4 are less than that value, while (-1+√17)/4 ≈ 0.8 and (-1+√161)/4 ≈ 2.9 are greater than that value. This means that when −2 ≤ f(x) ≤ 16 , we have two ranges -- from -3.4 to -1.3 and from 0.8 to 2.9 . Between -1.3 and 0.8, the function goes down then up, with all values less than f(x)=-2. Below -3.4 and above 2.9, all values are greater than f(x) = 16. One thing we can notice is that both ranges have a difference of approximately 2.1 between its high and low x values. The question asks for a value of a where a ≤ x ≤ a+3. As the difference between the high and low values are only 2.1, it would be impossible to have a range of greater than that.

Part (a)

Since we want segment AT to be an altitude, this means that point A is somewhere on segment RI such that angle TAI is 90 degrees. In other words, segments AT and RI are perpendicular. Check out the diagram below.

We'll need to find the slope of line RI, so we'll need the slope formula

R = (x1,y1) = (-2,-2)

I = (x2,y2) = (4,1)

m = slope of line RI

m = (y2-y1)/(x2-x1)

m = (1-(-2))/(4-(-2))

m = (1+2)/(4+2)

m = 3/6

m = 1/2

m = 0.5

The slope of line RI is 1/2 or 0.5

Now let's use point R(-2,-2) along with that slope we just found to find the equation of line RI.

Turn to point slope form

y - y1 = m(x - x1)

y - (-2) = 0.5(x -(-2))

y + 2 = 0.5(x + 2)

y + 2 = 0.5x + 1

y = 0.5x + 1 - 2

y = 0.5x - 1

This is the equation of line RI. We'll use it later.

----------

We found that the slope of line RI was 1/2.

The negative reciprocal involves us flipping the fraction and flipping the sign to get -2/1 or simply -2.

The perpendicular slope is -2. This is the slope of altitude AT.

We want line AT to go through T(-2,4), so we'll use this point along with the perpendicular slope we just found to calculate the equation of line AT.

We'll turn to the point slope form

y - y1 = m(x - x1)

y - 4 = -2(x - (-2))

y - 4 = -2(x + 2)

y - 4 = -2x - 4

y = -2x - 4 + 4

y = -2x

The equation of the line that goes through points A and T is y = -2x.

----------

To summarize so far, we have these two equations

Apply substitution to solve for (x,y) to find the intersection point. This will determine where point A is located.

y = 0.5x - 1

-2x = 0.5x - 1

-2x-0.5x = -1

-2.5x = -1

x = -1/(-2.5)

x = 0.4

Then we can determine y like so

y = -2x

y = -2(0.4)

y = -0.8

Therefore, point A is located at (0.4, -0.8). Both coordinate values are exact. In fraction form, we can say that the point is (2/5, -4/5), but I find decimals easier to work with in this instance.

===============================================================

Part (b)

To find the length of segment AT, we can find the distance from A to T. As you can probably guess, we'll use the distance formula.

A = (x1,y1) = (0.4, -0.8) ... found back in part (a)

T = (x2,y2) = (-2, 4) ... given

[tex]d = \sqrt{ (x_2-x_1)^2+(y_2-y_1)^2 }\\\\d = \sqrt{ (-2-0.4)^2+(4 - (-0.8))^2 }\\\\d = \sqrt{ (-2-0.4)^2+(4 + 0.8)^2 }\\\\d = \sqrt{ (-2.4)^2+(4.8)^2 }\\\\d = \sqrt{ 5.76+23.04 }\\\\d = \sqrt{ 28.8 }\\\\d \approx 5.36656\\\\d \approx 5.37\\\\[/tex]

The distance from point A to point T is approximately 5.37 units. This means that segment AT is roughly 5.37 units long.

Answer:

Step-by-step explanation:

Hello!

x² + 5x-2

6² + 5*6 -2 =

36 +30 -2 =

66 -2=

64

Answer:

(-1,-0.5)

Step-by-step explanation:

Find the solution to this problem by using the midpoint formula which is (x1+x2/2,y1+y2/2) plug in the values of y and x to get -11+9/2+0-1/2. simplify to get the solution of (-1,-0.5)

Answer:

84

Step-by-step explanation:

To find the average of the data or the mean, add 75, 82, and 95 which is 252, then 252 divided by 3 = 84. Hopefully, this helps :)

Answer:

its basically just rate of change or slope. with derivatoves you can find the slope of a tangent line which is a line that touches the curve at a point.

Answer: -1

Step-by-step explanation:

Look at the patter it has

let breadth be X

length = 2x

height = 8m

rate of painting the four wall= 20/m^2

cost of painting=9600

Area of four wall= cost of painting / rate

= 9600/20

= 480m^2

again,

Area of four wall = 2 h(l+b)

or, 480=2×8(X+2x)

or, 480/16=3x

or, 30/3=X

or, X= 10m

again,

2x= 2×10m=20m

again,

Area of floor = length × breadth

= 20×10

=200m^2

again,

rate of carpeting the floor= 400/m^2

cost of carpeting the floor = rate × area

= 400× 200

= Rs. 80000

Answer: 33

Work Shown:

Apply the pythagorean theorem to get

[tex]a^2 + b^2 = c^2\\\\x^2 + 44^2 = 55^2\\\\x^2 + 1936 = 3025\\\\x^2 = 3025 - 1936\\\\x^2 = 1089\\\\x = 33[/tex]

Answer:

B

Step-by-step explanation:

f(x) = 2x^2 - 4x + 5                   Put brackets around the first 2 terms.

f(x) = (2x^2 - 4x) + 5                 Take out the common factor of 2

f(x) = 2(x^2 - 2x) + 5                 1/2 the second term and square.

f(x) = 2(x^2 -2x + (2/2)^2) + 5   Express brackets as a perfect square.

f(x) = 2(x - 1)^2 + 5                     Multiply 2 * 1 (the term without an x. Subtract.

f(x) = 2(x - 1)^2 + 5 - 2                Combine

f(x) = 2(x - 1)^2 + 3

Answer:

5+5t

Step-by-step explanation:

The answer you are looking for is t^3+3t^2+6t+4.

Solution:

(t+1)(t^2+2t+4)

t^3+2t^2+4t+t^2+2t+4

t^3+3t^2+6t+4

Answer:

See below.

Step-by-step explanation:

17.)

[tex]x+100+120+100=360\\x+320=360\\x=40[/tex]

18.)

[tex]x+150+77+48=360\\x+275=360\\x=85[/tex]

19.)

[tex]x+122+92+76=360\\x+290=360\\x=70[/tex]

20.)

[tex]x+115+85+60=360\\x+260=360\\x=100[/tex]

Answer:

Graph B

Explanation: