Help me with my physics, please

Answer:

|x| = √53

Explanation:

We are told that the vector starts at the point (0.0) and ends at (2,-7) .

Thus, magnitude of displacement is;

|x| = √(((-7) - 0)² + (2 - 0)²)

|x| = √(49 + 4)

|x| = √53

Answer:

The correct answer is - c.  Spaceship will have a velocity to the East and will be slowing down.

Explanation:

In this case, if turned on thruster #2 then it will exert force on the west side as thruster 2 is on the east side and it can be understood by Newton's third law that says each action has the same but opposite reaction.

As the spaceship engine applies force on the east side then according to the law the exhauster gas applies on towards west direction. It will try to decrease the velocity of the spaceship however, the direction of floating still be east side initally.

Answer:

a)  p₀ = 1.2 kg m / s,  b) p_f = 1.2 kg m / s,  c)   θ = 12.36, d)  v_{2f} = 1.278 m/s

Explanation:

For this exercise we define a system formed by the two balls, which are isolated and the forces during the collision are internal, therefore the moment is conserved

a) the initial impulse is

         p₀ = m v₁₀ + 0

         p₀ = 0.6 2

         p₀ = 1.2 kg m / s

b) as the system is isolated, the moment is conserved so

        p_f = 1.2 kg m / s

we define a reference system where the x-axis coincides with the initial movement of the cue ball

we write the final moment for each axis

X axis

         p₀ₓ = 1.2 kg m / s

         p_{fx} = m v1f cos 20 + m v2f cos θ

         p₀ = p_f

        1.2 = 0.6 (-0.8) cos 20+ 0.6 v_{2f} cos θ

         1.2482 = v_{2f} cos θ

Y axis  

        p_{oy} = 0

        p_{fy} = m v_{1f} sin 20 + m v_{2f} cos θ

        0 = 0.6 (-0.8) sin 20 + 0.6 v_{2f} sin θ

        0.2736 = v_{2f} sin θ

we write our system of equations

         0.2736 = v_{2f} sin θ

         1.2482 = v_{2f} cos θ

divide to solve

         0.219 = tan θ

          θ = tan⁻¹ 0.21919

          θ = 12.36

let's look for speed

            0.2736 = v_{2f} sin θ

             v_{2f} = 0.2736 / sin 12.36

            v_{2f} = 1.278 m / s

Answer:

zzyibgsdwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwe

Explanation:

Complete Question

The Complete Question is Attached below

Answer:

[tex]E_t=2.14*10^{-13}J[/tex]

Explanation:

From the question we are told that:

Kinetic energy [tex]K.E=5*10^{-14}[/tex]

Generally, the equation for Total Energy is mathematically given by

[tex]E_t=K.E+2me[/tex]

Where

Mass of an electron in MeV

[tex]m=0.510 998 950 00 MeV[/tex]

And

Electron Charge

[tex]1.6 * 10^{-19}[/tex]

Therefore

[tex]E_t=K.E+2me[/tex]

[tex]E_t=5*10^{-14}*0.510 998 950 00*1.6 * 10^{-19}[/tex]

[tex]E_t=2.14*10^{-13}J[/tex]

Answer:

The fumes stop getting sucked up by the fume hood once the beaker is pulled out of the hood.

The minimum width of the screen is 34 cm.

For a diffraction grating, dsinθ = mλ where d = grating spacing = 1/5640 lines per cm = 1/5640 cm per line = 1/5640 × 10⁻² m per line, θ = angle between principal maximum and the center axis of the grating, m = order of maxima = 1 (since we require the position of the principal maximum) and λ = wavelength = 455 nm = 455 × 10⁻⁹ m

So, sinθ = mλ/d

Also tanθ = L/D where θ = angle between principal maximum and the center axis of the grating, L = distance between central maximum and principal maximum and D = distance between grating and screen = 0.661 m.

For small angles sinθ ≈ tanθ

So, mλ/d = L/D

making L subject of the formula, we have

L = mλD/d

L = 1 × 455 × 10⁻⁹ m × 0.661 m ÷  1/5640 × 10⁻² m per line

L = 1 × 455 × 10⁻⁹ m × 0.661 m  × 5640 × 10² line per m

L = 1696258.2 × 10⁻⁷ m

L = 0.16963 m

L ≅ 0.17 m

So, for centers of all the principal maxima formed on either side of the central maximum fall on the screen, the minimum width of the screen is w = 2L.

So, w = 2 × 0.17 m

w = 0.34 m

w = 34 cm

So for the centers of all the principal maxima formed on either side of the central maximum fall on the screen, the minimum width of the screen is 34 cm.

Learn more about diffraction grating here:

https://brainly.com/question/15712101

Answer:

 emf = 312 V

Explanation:

In this exercise the electromotive force is asked, for which we must use Faraday's law

           emf =  [tex]- N \frac{d \Phi }{dt}[/tex]- N dfi / dt

           Ф = B. A = B A cos θ

bold type indicates vectors.

They indicate that the magnetic field is constant, the angle between the normal to the area and the magnetic field is parallel by local cosine values ​​1

It also indicates that the area is reduced from  a₀ = 0.325 me² to a_f = 0 in a time interval of ΔT = 0.100 s, suppose that this reduction is linear

            emf = -N B [tex]\frac{dA}{dT}[/tex]

            emf = - N B (A_f - A₀) / Dt

we calculate

           emf = - 60 1.60 (0 - 0.325) /0.100

           emf = 312 V

The direction of this voltage is exiting the page

Answer:

These four are rotary, oscillating, linear and reciprocating. Each one moves in a slightly different way and each type of achieved using different mechanical means that help us understand linear motion and motion control.

(I got this off the web so credits to the rightful owner and I hope you have good day :)

Answer:

A curved mirror is a mirror with a curved reflecting surface. The surface may be either convex or concave. Most curved mirrors have surfaces that are shaped like part of a sphere, but other shapes are sometimes used in optical devices.

A convex mirror (or lens) is one constructed so that it is thicker in the middle than it is at the edge.

Answer:

F = 1.128 10⁸ Pa

Explanation:

Pressure is defined by

         P = F / A

If the gas is ideal for equal force eds on all the walls, so on the piston area we have

        F = P A

We reduce the pressure to the SI system

       P = 150 kpa (1000 Pa / 1kPa = 150 103 Pa

we calculate

       F = 150 10³ / 0.00133

       F = 1.128 10⁸ Pa

Answer:

L = 169.5 m

Explanation:

Using Ohm's Law:

V = IR

where,

V = Voltage = 1.5 V

I = Current = 10 mA = 0.01 A

R = Resistance = ?

Therefore,

1.5 V = (0.01 A)R

R = 150 Ω

But the resistance of a wire is given by the following formula:

[tex]R = \frac{\rho L}{A}[/tex]

where,

ρ = resistivity = 1 x 10⁻⁶ Ω.m

L = length of wire = ?

A = cross-sectional area of wire = πr² = π(0.6 mm)² = π(0.6 x 10⁻³ m)²

A = 1.13 x 10⁻⁶ m²

Therefore,

[tex]150\ \Omega = \frac{(1\ x\ 10^{-6}\ \Omega .m)L}{1.13\ x\ 10^{-6}\ m^2}\\\\L = \frac{150\ \Omega(1.13\ x\ 10^{-6}\ m^2)}{1\ x\ 10^{-6}\ \Omega .m}\\\\[/tex]

L = 169.5 m

Explanation:

F = ma

[tex]a = \frac{f}{m} [/tex]

[tex]a = \frac{1500}{500} = 3[/tex]

[tex]a = \frac{v2 - v1}{t} [/tex]

[tex]3 = \frac{v2 - 10}{10} [/tex]

v2 (final) = 40 m/s to the right direction

Answer:

The resolving power remains same.

Explanation:

The resolving power of the lens is directly proportional to the diameter of the lens not on the focal length.

As the diameter is same but the focal length is doubled so the resolving power remains same.

Answer:

350

Explanation:

Since it travels 350 meters per second, the jet will travel 350 meters in one second.

Blood comes into the right atrium from the body, moves into the right ventricle and is pushed into the pulmonary arteries in the lungs. After picking up oxygen, the blood travels back to the heart through the pulmonary veins into the left atrium, to the left ventricle and out to the body's tissues through the aorta.

Hope it helps you

Mark my answer as brainlist

have a nice day

Answer:

When drugs are taken in are body are brain release dopamine: which make us feel so pleasure and good, and for this some people are addicted to drugs which makes them feel good. on other hand damaging their health.

Answer:

Explanation:

An impulse results in a change of momentum.

The impulse is the product of a force and a distance. This will be represented by the area under the curve

a) W = ½(4.00)(3.00) = 6.00 J

b) W = (11.0 - 4.00)(3.00) = 21.0 J

c) W = ½(17.0 - 11.0)(3.00) = 9.00 J

d) ASSUMING the speed at x = 0 is in the direction of applied force

½(3.00)(v₄²) = ½(3.00)(0.450²) + 6.00

v₄ = 2.05 m/s

½(3.00)(v₁₇²) = ½(3.00)(0.450²) + 6.00 + 21.0 + 9.00

v₁₇ = 4.92 m/s

If the initial speed is NOT in the direction of applied force, the final speed will be slightly less in both cases.

Answer:

b = frequency

Answer:

gshshs

Explanation:

hshsksksksbsbbshd

Answer:

Microwave is a types of a electromagnetic radiation

Answer:

Transvers

Explanation:

Because microwave is electromagnetic  waves and all electromagnetic waves are transvers.

Answer:

Very TRUE

Option A is legit

The SI unit of pressure is the pascal: 1Pa=1N/m2 1 Pa = 1 N/m 2 . Pressure due to the weight of a liquid of constant density is given by p=ρgh p = ρ g h , where p is the pressure, h is the depth of the liquid, ρ is the density of the liquid, and g is the acceleration due to gravity.

Answer:

D) Quadruple.

Explanation:

We will use the second equation of motion to solve this problem:

[tex]s = v_it + \frac{1}{2}gt^2[/tex]

where,

s = distance travelled by the rock

vi = initial speed of rock = 0 m/s

t = time taken

g = acceleration due to gravity on the surface of the moon

Therefore,

[tex]s = (0\ m/s)t+\frac{1}{2}gt^2\\\\s =\frac{1}{2}gt^2[/tex]----------- equation (1)

Now, we double the time:

[tex]s' = \frac{1}{2}g(2t)^2\\\\s' = 4(\frac{1}{2}gt^2)[/tex]

using equation (1):

s' = 4s

Hence, the correct option is:

D) Quadruple.

Answer:

If decreased blood pressure is detected, the adrenal gland is stimulated by these stretch receptors to release aldosterone, which increases sodium reabsorption from the urine, sweat, and the gut. This causes increased osmolarity in the extracellular fluid, which will eventually return blood pressure toward normal.

Answer:

The mass of the second block=0.457 kg

Explanation:

We are given that

m1=1.5 kg

v1=1.3m/s

v2=4.3 m/s

V=2.0 m/s

We have to find the mass of the second block.

[tex]m_1v_1+m_2v_2=(m_1+m_2)V[/tex]

Let m2=m

Substitute the values

[tex]1.5(1.3)+m(4.3)=(1.5+m)(2)[/tex]

[tex]1.95+4.3m=3+2m[/tex]

[tex]4.3m-2m=3-1.95[/tex]

[tex]2.3m=1.05[/tex]

[tex]m=\frac{1.05}{2.3}[/tex]

[tex]m=0.457 kg[/tex]

Hence,  the mass of the second block=0.457 kg

Answer:

check photo

Explanation: