Diamond is composed of hexagonal rings in which sp3 hybridized carbon atoms are linked together.
Hybridization refers to the mixing of atomic orbitals to yield hybrid orbitals that are suitable for bonding. The energy of orbitals that combine to form hybrid orbitals must be close enough for such combination to take place.
Diamond is composed of hexagonal rings in which sp3 hbridized carbon atoms are linked together. Each carbon atom in diamond is tetrahedral.
Learn more: https://brainly.com/question/967776
The mixing of the two different orbitals to form a compound is called hybridization. For example mixing of s and p orbits.
The correct answer is sp3.
The arrangement of the elements in a different manner to form a new compound is called allotropes. For example, diamond and graphite are the allotropes of carbon.
The valence electrons are in p orbitals and p orbit mixed after the s orbitals.
Therefore, the correct answer is sp3
For more information, refer to the link:--
https://brainly.com/question/3523174
Can KI+Cl2 occur or not
Yes according to reliable sources.
For the given reactions determine if the entropy increases or decreases.
A) 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g)
B) CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O
Entropy increases in reaction 1 due to increase in the number of particles while entropy decreases in reaction 2 due to decrease in the number of particles.
Entropy refers to the degree of disorderliness in a system. The higher the entropy, the more disorderly the system is and the lower the entropy, the less disorderly the system is. We must note that entropy increases with increase in the number of particles.
In the reaction, 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g), entropy increases because one of the products is a gas and the number of particles increases from left to right. In the second reaction, CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O, entropy decreases because the number of particles decreases.
Learn more: https://brainly.com/question/14281129
HELP PLEASE I NEED THIS
What is the lowest point of a wave called?
Amplitude
Crest
Frequency
Trough
Answer:
the lowest point of the wave is called Trough
Answer:
Trough is the correct answer
Explanation:
The highest part of the wave is called the crest. The lowest part is called the trough.
Escriba un poema usando 4 de las siguientes palabras: lluvia, nieve, lluvia, granizo, tornado, huracanes, frente cálido, frente frío, alta presión, baja presión, termómetro, barómetro, anemómetro, pluviómetro, veleta o higrómetro.
plis ayúdenme porfa
Answer:
i dont speak mexican
Explanation:
After spending some time in the stomach, the food is sent to the blank
Answer:
the small intestine where nutrients are absorbed.
Magnesium metal burns in air with an intense bright light according to the equation
2 Mg(s) + O2(g) → 2 MgO(s) + 1200 kJ
A.) What is the amount of energy in kJ produced when 4.5 mol of Mg is burned in the presence of excess oxygen?
The heat produced by 4.5 moles of magnesium when burnt is 2700 kJ.
A thermochemical reaction is a reaction in which the amount of heat lost or gained is included in the reaction equation. The thermochemical reaction equation for the combustion of magnesium is shown as follows;
2 Mg(s) + O2(g) → 2 MgO(s) + 1200 kJ
From the reaction equation;
2 moles of magnesium produced 1200 kJ of heat
4.5 moles of magnesium will produce 4.5 moles × 1200 kJ/2 moles
= 2700 kJ
Learn more: https://brainly.com/question/14281129
In a constant-pressure calorimeter, 55.0 mL of 0.340 M Ba(OH), was added to 55.0 mL of 0.680 M HCI. The reaction caused the temperature of the solution to rise from 22.21 °C to 26.84 °C. If the solution has the same density and specific heat as water (1.00 g/mL and 4.184J/g • °C.) respectively), what is A4 for this reaction (per mole H,O produced)? Assume that the total volume is the sum of the individual volumes.
Answer:
Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O
The reactants are present in equimolar amounts, so there is no excess or limiting reactants.
(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O
(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J
(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O
Explanation:
A radioactive sample has a half life of 1 hour. If you start with 1.000 gram of it at noon, how much of it remains at 4pm
The amount of the sample remaining at 4pm is 0.0625 g
We'll begin by calculating the number of half-lives that has elapsed
Half-life (t½) = 1 hour
Time (t) = 4 hour
Number of half-lives (n) =?n = t / t½
n = 4 / 1
n = 4Finally, we shall determine the amount the sample remaining at 4pmNumber of half-lives (n) = 4
Initial amount (N₀) = 1 g
Amount remaining (N) =?[tex]N = \frac{N_0}{ {2}^{n}} \\ \\ N = \frac{1}{ {2}^{4}} \\ \\ N = \frac{1}{16} \\ \\ N = 0.0625 \: g[/tex]
Thus, the amount remaining at 4pm is 0.0625 g
Learn more: https://brainly.com/question/25750315
What is the [H+] if pOH =9.50
will it be acid or basic?
Taking into account the definition of pH and pOH, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.
First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
The following relationship can be established between pH and pOH:
pH + pOH= 14
In this case, being pOH= 9.50, pH is calculated as:
pH + 9.40= 14
pH= 14 - 9.50
pH= 4.50
Replacing in the definition of pH the concentration of H⁺ ions is obtained:
- log [H⁺]= 4.50
Solving :
[H⁺]= 10⁻⁴ ⁵
[H⁺]= 3.16×10⁻⁵ M
The numerical scale that measures the pH of the substances includes the numbers from 0 to 14, being acidic solutions with a pH lower than 7, and basic those with a pH greater than 7. The pH = 7 indicates the neutrality of the solution.
In this case, the pH has a value of 4.50. So, the solution is acidic.
In summary, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.
Learn more:
brainly.com/question/16032912?referrer=searchResults brainly.com/question/13557815?referrer=searchResultsYou measure the absorbance of your extracted curcumin solution and realize that the solution is too concentrated. What made you realize this
If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.
Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.
Hence, if the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.
Learn more: https://brainly.com/question/13440572
There are two unknowns in this problem - the mass of potassium carbonates and the mass of sodium carbonate. Let's designate the grams of potassium carbonate as our first unknown (you may want to call it gKcarb, or x, some other variable name that makes sense to you) and the grams of sodium carbonate as our second unknown(you may want to call it gNacarb, or y, some other variable name that makes sense to you). Set up an equation for the sum of your two unknowns. Starting with 'unknown' grams of potassium carbonate, use stoichiometry to calculate the number of moles of nitric acid that would react with the potassium carbonate. Your answer will have a variable for your unknown grams of potassium carbonate in it. Starting with 'unknown' grams of sodium carbonate, use stoichiometry to calculate the number of moles of nitric acid that would react with the sodium carbonate. Your answer will have a variable for your unknown grams of sodium carbonate in it. Set up an equation for what you get if you add these two quantities.
This problem, is describing two scenarios, the first one, a reaction between potassium carbonate and nitric acid, and also this very same acid with sodium carbonate. In addition, it is asked to set up two equations whereby you can get the grams of nitric acid needed to react with the unknown grams of both carbonates.
In this case, we can start off by designating the unknown mass of potassium carbonate as X and that of sodium carbonate as Y, so that we will be able to provide a reliable answer. Next, we write the corresponding chemical equations that take place:
K2CO3 + 2HNO3 --> 2KNO3 + H2O + CO2
Na2CO3 + 2HNO3 --> 2NaNO3 + H2O + CO2
After that, we can set up the conversion by considering the following calcultion track:
g Carbonate --> mol Carbonate --> mol HNO3 --> g HNO3
The conversion from grams to moles involve the carbonates' molar mass and the conversion from moles of nitric acid to grams, its molar mass well. In addition, we need the 1:2 mole ratio of the carbonates to nitric acid that it is evidenced in the reaction.
Therefore, the resulting equations that can be set up are shown as follows:
[tex]X g K_2CO_3 *\frac{1mol K_2CO_3 }{138.2 gK_2CO_3 } \frac{2molHNO_3}{1molK_2CO_3 } *\frac{63.1gHNO_3}{1molHNO_3} \\\\Y g Na_2CO_3 *\frac{1mol K_2CO_3 }{105.99 gK_2CO_3 } \frac{2molHNO_3}{1molNa_2CO_3 } *\frac{63.1gHNO_3}{1molHNO_3}[/tex]
Learn more:
https://brainly.com/question/22889208https://brainly.com/question/24384921What are the bond angles found in germanium disulfide ?
Answer:
Every germanium atom is tetrahedrally linked to four sulphur atoms, with an interatomic distance of 2.19A. The angle between the two sulphur bonds is 103°.
hope this helps
An interatomic distance of 2.19A exists between each germanium atom and the four sulphur atoms that are tetrahedrally connected to it. The two sulphur bonds form a 103° angle.
What is bond angle ?A complex molecule's or ion's bond angle is the angle between the two bonds, or the angle between two orbitals that contain bonding electron pairs surrounding the central atom. It is determined using a spectroscopic approach and measured in degrees.
Any angle between two bonds that share an atom is known as a bond angle, and it is often measured in degrees. The distance along the straight line between the nuclei of two bound atoms is known as a bond distance.
Bond angles also have a role on a molecule's structure. The angles between neighboring lines that form bonds are known as bond angles. The difference between linear, trigonal planar, tetrahedral, trigonal-bipyramidal, and octahedral crystals may be determined by the bond angle.
Thus, The two sulphur bonds form a 103° angle.
To learn more about bond angle, follow the link;
https://brainly.com/question/14089750
#SPJ2
A 5.35 M sugar solution is diluted from 240.0 mL to 862.5 mL. What is the concentration of the dilute solution
Answer:
1.345.0
Explanation:
Hope this helpssss
Which of the following best describes the scientific exploration of the atom?
The structure of Disodium edta
Answer:
EDTA disodium salt | C10H14N2Na2O8
Explanation:
What is it called when you have hydrogen peroxide that just eventually turns into water
Answer:
chlorine
Explanation:
Answer:chlorine reacts with hydrogen peroxide
Explanation:
A mixture is made of 40 ml of salt water to 200 ml of solution. What percent of the solution is salt water?
Answer:
16.7%
Explanation:
40 ml of salt water + 200 ml of solution = 240 ml
40/240 = 4/24 = 1/6=16.7%
please i need this now ill give you brainlest
Answer: The following information should be included;
What is the difference between the greenhouse effect, climate change and global warming?
What proof do we have that climate change is happening?
Why is it happening?
pls help 8th grade k12
how is waste removed from the body
Waste is removed from the body in various ways. Kidneys filter out metabolic waste, excess fluid and eliminate it in the form of urine. Lungs exhale CO2 from the deoxygenated blood. The undigested solid waste is egested out from the large intestine. Excretion is the process of removing wastes and excess water from the body. It is one of the major ways the body maintains homeostasis. Organs of excretion make up the excretory system. They include the kidneys, large intestine, liver, skin, and lungs.
2. What pressure is required to compress 196.0 L of air at 1.00 atmosphere into a cylinder
whose volume is 26 0 L? (2 points)
Answer:
7.54 atmExplanation:
The required pressure can be found by using the formula for Boyle's law which is
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
From the question we have
[tex]P_2 = \frac{1 \times 196}{26} = \frac{196}{26} \\ = 7.538461...[/tex]
We have the final answer as
7.54 atmHope this helps you
. Nhiệt độ ban đầu của 344 g một mẫu sắt là 18,2oC. Nếu mẫu sắt này hấp thụ 2,25 kJ nhiệt lượng thì nhiệt độ cuối của mẫu sắt này là bao nhiêu? (CFe = 0,449 J/g.K).
Answer:
i can't understand the question
4.What volume of hydrogen gas at STP is produced when 2.5 grams of zinc react with an
excess of hydrochloric acid?
Answer:
0.86
Explanation:
1mol of Zn has mass of 65.39g.The amount of Zn is 2.5g65.39g/mol=0.038mol.
The amount of H2 produced is the same as the amount of Zn consumed (0.038mol).
1mol of ideal gas will occupy 22.4L at STP.
The H2 will occupy 0.038mol×22.4L/mol=0.86L
.
17.
In the reaction N2 + 3H2 → 2NH3 how many moles of ammonia will be produced from 1.30 mol
of hydrogen and excess nitrogen?
According to the equation given, we have N2 + 3H2 → 2NH3.
Therefore, to determine the moles of NH3 we have to do the following-
1.3 mol H2 × 2 mol NH3 / 3 mol H2 = 0.87 mol
Answer: .87 moles of NH3 are produced from 1.3 moles of H2.
I hope this helps!
2. A solution NaF is add dropwise to a solution that is .0122 M in Ba . When the concentration of F exceeds ______M, BaF2 will precipitate. Neglect volume changes. BaF2 K
Explanation:
BaF2(s) <------> Ba2+(aq) + 2F-(aq)
Ksp BaF2 = 1.0 x 10^-6.
Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium
When Qsp >Ksp, BaF2 will precipitate
Qsp = [Ba2+(aq)]×[F-(aq)]^2
[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.
0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6
[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6
[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6
[F- (aq)] > 9.05 × 10^-3 moldm-3
So F- concentration should be more than 9.05 × 10^-3 moldm-3
A buffer solution was prepared by mixing 50.0 mL of a 0.100 M solution of CH3COOH with 0.500 grams of NaCH3COO. The resulting mixture is diluted to 100.0 mL. What is the pH of the solution
Answer:
100.0
Explanation:
Have a great day god bless
Identify the strongest intermolecular force that is likely to affect each of the samples described below.
A mixture of chlorine gas (Cl) and fluorine gas (F): V London dispersion forces
COMPLETE
Tweaks
Menu
A mixture of hydrogen sulfide (H2S) and hydrogen chloride (HCI): V dipole-dipole interactions
Search
Selection
COMPLETE
Guess
this
hydrogen bonding
A mixture of water (H2O) and ammonia (NH3):
Answer:
A mixture of chlorine gas (Cl2) and fluorine gas (F2):
✔ London dispersion forces
Explanation:
How is hot spot and ring of fire similar
Answer:The plates are not fixed but are constantly moving atop a layer of solid and molten rock called the mantle. The Ring of Fire is a string of volcanoes and sites of seismic activity, or earthquakes, around the edges of the Pacific Ocean. ... A hotspot is a place in the middle of a tectonic plate where hot magma rises.
Explanation:
The distance between two adjacent peaks on a wave is called the wavelength. (2pts) a. The wavelength of ultraviolet light is 255nm. What is the wavelength in meters? b. The wavelength of a beam of red light is 683nm. What is its wavelength in angstroms?
Answer:
a.2.55e-7
b.6830
Explanation:
Which choice is an element? Question 2 options: air (N2 mixed with O2 , and CO2 ) sodium chloride (NaCl) oxygen (O2 ) water (H2O )
Answer:
oxygen (O2 )
Explanation:
