given two temperatures, 39 °F and 51°F, which if the following correctly compares the number of chances for particals to bounce off each other during chemical reaction?
Same at both
Lower at 39 °F
Lower at 51 °F
Does not depend on temperature​

Explanation:

1. Nucleus is a memberane bound organelle that contains cell,s chromosomes.

Acetaminophen is used to treat patients with aches and fever. It is safe to give a dose of 4 grams in 24 hours period.

It is an effective medicine which does not require much time to provide relief to the patient.

Usually tylenol is the best medicine which consists of Acetaminophen in appropriate quantity to provide relief from pain and fever.

The reporting for the doses introduced to the patient must be routine since it is not an emergency case.

The correct answer is a. Routine

Learn more at https://brainly.com/question/24335381

Answer:

Chromosome condensation, the landmark event at the onset of prophase, often begins in isolated patches of chromatin at the nuclear periphery. Later, chromosome condense into two threads termed sister chromatids that are closely paired along their entire lengths.

Explanation:

hope dis help & may I have brainly plz

Follow the rules of Bronsted Lowry theory

So

#a

NH_2-

Add a H

#b

HnO_3

Take a H

#1

Conjugate acid means one H+ is added

sw

#2

Conjugate base means donate a H+

Answer:

nfururhrj waltz quiz amora7ersgdsYsdi6 whiz 53

96rduttie

Answer:

No.Kerosene oil and water do not mix with each other and form two separate layers.

Answer:

No

Explanation:

They cannot be mixed together they will form upper and lower layer

Answer:

D) 152 g

Explanation:

a mass of 1 mol Cr2O3 = 2 × 52 + 3 × 16 = 152 g number of moles of Cr2O3.

Answer:

Two methods which help us to conserve water are:

Sprinkler irrigation system: this irrigation has an arrangement of vertical pipes with rotating nozzles on the top. It is more useful in the uneven and sandy land where sufficient water is not available.

Drip irrigation system: this irrigation system has an arrangement of pipes or tubes with very small holes in them to water plants drop by drop just at the base of the root. It is very efficient as water is not wasted at all.

Answer:

Solar heating of the Earth's surface is uneven because land heats faster than water, and this causes air to warm, expand and rise over land while it cools and sinks over the cooler water surfaces.This differential heating is passed on to the air above by conduction which causes air expansion and changes in pressure.

Answer:

21.4g of HBr is the minimum mass that could be left over.

Explanation:

Based on the reaction:

HBr + NaOH → NaBr + H2O

1 mole of HBr reacts per mole of NaOH

To solve this question we need to find the moles of both reactants. If moles NaOH > moles HBr, the difference in moles represents the minimum moles of HBr that could be left over because this reaction is 1:1. Using the molar mass we can find the minimum mass of HBr that could be left over, as follows:

Moles NaOH -40.0g/mol-

17g * (1mol/40.0g) = 0.425 moles NaOH

Moles HBr -Molar mass: 80.91g/mol-

55.8g * (1mol/80.91g) = 0.690 moles HBr

The difference in moles is:

0.690 moles - 0.425 moles =

0.265 moles of HBr could be left over

The mass is:

0.265 moles * (80.91g/mol) =

Answer:

-76.3 kJ

Explanation:

Here is the complete question

Given the standard enthalpy changes for the following two reactions:

(1) 2Fe(s) + O₂(g) → 2FeO(s)......ΔH° = -544.0 kJ

(2) 2Zn(s) + O₂(g) → 2ZnO(s)......ΔH° = -696.6 kJ. What is the standard enthalpy change for the reaction:

(3) FeO(s) + Zn(s) → Fe(s) + ZnO(s)......ΔH° = ?

Solution

Since (1) 2Fe(s) + O₂(g) → 2FeO(s)......ΔH° = -544.0 kJ

reversing the reaction, we have

2FeO(s) → 2Fe(s) + O₂(g) ......ΔH° = +544.0 kJ (4)

Adding reactions (2) and (3), we have

2FeO(s) → 2Fe(s) + O₂(g) ......ΔH° = +544.0 kJ (4)

2Zn(s) + O₂(g) → 2ZnO(s)......ΔH° = -696.6 kJ  (2)

This gives

2FeO(s) + 2Zn(s) → 2Fe(s) + 2ZnO(s)......ΔH° =

The enthalpy change for this reaction is the sum of enthalpy changes for reaction (2) and (3) = ΔH° = +544.0 kJ + (-696.6 kJ)

= +544.0 kJ - 696.6 kJ)

= -152.6 kJ

Since the required reaction is (3) which is FeO(s) + Zn(s) → Fe(s) + ZnO(s)

we divide the enthalpy change for reaction (4) by 2 to obtain the enthalpy change for reaction (3).

So, ΔH° = -152.6 kJ/2 = -76.3 kJ

So, the standard enthalpy change for the reaction

FeO(s) + Zn(s) → Fe(s) + ZnO(s) is -76.3 kJ

Answer:

Explanation:

hope this helps you

The mass of the marble is greater than that of the water. The marble weighs more than an equivalent volume of the water. The force from dropping the marble breaks the surface tension of the water. The marble has greater mass and volume than the water.

Answer:

Moles of water are 0.868

Explanation:

Answer:

-401.06 atm

Explanation:

Applying,

P = (nRT/V-nb)-(an²/V²)............... Equation 1

Where P = Pressure, R = Universal gas constant, V = molar Volume, T = Temperature in Kelvin, a = gas constant a , b = gas constant b, n = numbers of mole

From the question,

Given: T = 299.8 K, V = 0.8006 L, a = 2.318 L.atm/mol, b = 3.978×10²L/mol

Constant: R = 0.0082 atm.dm³/K.mol

Substitute these values into equation 1

P = [(0.0082×299.8×10.53)/(0.8006-(10.53×397.8)]-[(10.53²×2.318/0.8006²)]

P = (25.89/-4188.0334)-(400.995)

P = -0.0618-400.995

P = -401.06 atm

Answer:

When atoms approach one another closely, the electron clouds interact with each other and with the nuclei. If this interaction is such that the total energy of the system is lowered, then the atoms bond together to form a molecule.

Explanation:

Answer:

The two carbon atoms share a total of six electrons with each other.

Explanation:

Looking at the structure of the molecule H-C≡C-H as shown in the question, we will notice that there exists a triple bond between the two carbon atoms.

Each bond between the two carbon atoms represents two electrons shared. Since there are three bonds between the two carbon atoms, then a total of six electrons were shared between the two carbon atoms hence the answer chosen above.

Answer:

d. Prevents a drastic change in pH when an acid or base enters a solution.

Explanation:

The purpose of a buffer is to resist pH change and keep the solution relatively stable.

Answer:

1,000.000

Explanation:

Using Charles law

[tex]\boxed{\sf \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}[/tex]

[tex]\\ \sf\longmapsto V_1T_2=V_2T_1[/tex]

[tex]\\ \sf\longmapsto 1(40)=27V_2[/tex]

[tex]\\ \sf\longmapsto V_2=\dfrac{40}{27}[/tex]

[tex]\\ \sf\longmapsto V_2=1.48\ell[/tex]

Answer:

The hydrogen must be compressed to 1333.13302 kPa.

Explanation:

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:

P * V = n * R * T

In this case:

Replacing:

P* 10.5 L= 5.75 moles* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] * 293 K

Solving:

[tex]P=\frac{5.75 moles* 0.082 \frac{atm*L}{mol*K} * 293 K}{10.5 L}[/tex]

P= 13.157 atm

If 1 atm is equal to 101.325 kPa, then 13.157 atm is equal to 1333.13302 kPa.

The hydrogen must be compressed to 1333.13302 kPa.

Answer:

Compounds are substances made from atoms of different elements joined by chemical bonds. Common examples are water (H2O), salt (sodium chloride, NaCl), methane (CH4).

Explanation:

Zinc is the anode (solid zinc is oxidised). Silver is the cathode (silver ions are reduced).

By convention in standard cell notation, the anode is written on the left and the cathode is written on the right. So, in this cell: Zinc is the anode (solid zinc is oxidised). Silver is the cathode (silver ions are reduced).

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 1.2 M

Molarity of diluted solution (M₂) = 0.5 M

Volume of diluted solution (V₂) = 100 mL

The volume of stock solution needed can be obtained by using the dilution formula as illustrated below:

1.2 × V₁ = 0.5 × 100

1.2 × V₁ = 50

Divide both side by 1.2

V₁ = 50 / 1.2

Thus, 42 mL of the stock solution is needed.

Learn more: https://brainly.com/question/24219233

Answer:

They need 41.7 mL of the original stock solution.

Explanation:

We can use the following equation for dilutions:

Cc x Vc = Cd x Vd

Where Cc and Vc are the concentration and volume values in the concentrated condition, whereas Cd and Vd are the concentration and volume values in the diluted condition.

The concentrated solution is the original stock solution, and it has:

Cc = 1.2 M

The diluted solution must be:

Cd = 0.500 M

Vd = 100 mL

So, we have to calculate Vc. For this, we replace the data in the equation:

[tex]V_{c} = \frac{C_{d} V_{d} }{C_{c} } = \frac{(0.500 M)(100 mL)}{1.2 M} = 41.7 mL[/tex]

Therefore, 41.7 mL of 1.2 M original stock solution are required to make 100  mL of a diluted solution with a concentration of 0.500 M.

Answer:

a. 1 mole of acid is equal to one equivalent.

b. 1.00 moles of HCl are found.

c. 1L of 2.00M NaOH is needed to reach the equivalence point

Explanation:

HCl reacts with NaOH as follows:

HCl + NaOH → NaCl + H2O

Where 1 mole of HCl reacts with 1 mole of NaOH. The reaction is 1:1

a. As the reaction is 1:1, 1 mole of acid is equal to one equivalent

b. The initial moles of HCl are:

1.00L * (2.00moles HCl / 1L) = 2.00 moles of HCl

At the halfway point, the moles of HCl are the half, that is:

1.00 moles of HCl are found

c. At equivalence point, we need to add the moles of NaOH needed for a complete reaction of the moles of HCl. As the moles of HCl are 2.00 and the reaction is 1:1, we need to add 2.00 moles of NaOH, that is:

2.00moles NaOH * (1L / 2.00mol) =

1L of 2.00M NaOH is needed to reach the equivalence point

Ortho and para hydrogen are nuclei forms

Answer:

false, it is not an example of facilitated diffusion

Answer:

Explanation:

When a drop of ink added into the water gradually moves in the whole quantity of water due to this entire water turns into blue color. This is nothing but the diffusion of ink particles into the water molecules. This is because water, as well as ink molecules, are in random motion due to the motion of ink substance.

Product B and E are toxic because they contain "BROMIDE" or ingredients that end in 'ol'

Based on the directions given in the information of this question, any product containing "bromide" or containing an ingredient that ends in "ol" is assumed to be TOXIC.

After carefully evaluating the ingredient contents of each product in the image attached to this question, it was realized that product B contains "pyridostigmine bromide" as an ingredient while product E contains "butorphanol" as an ingredient. Hence, in accordance to the guide given in this question, products B and E are toxic.

Learn more: https://brainly.com/question/2913382

Answer:

N2 but i really didn't know

The compound that would be expected to be an electrolyte is : ( A ) N₂

An electrolyte is any subsatnce which conducts electircity when dissolved in a solvent such as water. From the question the compound that can conduct electricty when dissolved in water is N₂

Hence we can conclude that The compound that would be expected to be an electrolyte is : ( A ) N₂

Learn more about electrolyte : https://brainly.com/question/14308411

#SPJ2