given two equations representing reactions: which type of reaction is represented by each of these equations?

Answer: In order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.

Explanation:

More is the concentration of reactant molecules more will be the number of collisions between their molecules. As a result, more readily the products will be formed.

Hence, for the given reaction when concentration of HCl is increased then there will be increase in the number of collisions between reactants.

Thus, we can conclude that in order to increase the rate of reaction between hydrochloric acid and sugar increase the concentration of hydrochloric acid to 2 M because greater concentration results in more collision between the reactants.

Answer:

Explanation: hell noo

Explanation:

Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence

Answer:

Light can be treated like particles because it is made of chunks like things called protons.

Answer: el texto no es tan claro

Answer:

Mass of sample in mg = 15,285 mg

Explanation:

Given:

Volume of urine sample = 15 ml

Density of sample = 1.019 g/ml

FInd:

Mass of sample in mg

Computation:

Mass = density x volume

Mass of sample in mg = Volume of urine sample x Density of sample

Mass of sample in mg = 1.019 x 15

Mass of sample in mg = 15.285 gram

Mass of sample in mg = 15.285 x 1,000

Mass of sample in mg = 15,285 mg

Answer:

The empirical formula is, C4H4S

Explanation:

Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles

Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g

Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles

Mass of hydrogen = 0.025 moles × 1 = 0.025 g

Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles

Mass of sulphur= 0.0064 moles ×32 = 0.2 g

Now we obtain the mole ratios by dividing through by the lowest ratio.

C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles

C4H4S

Answer:

Concentration: 0.185M HX

Ka = 9.836x10⁻⁶

pKa = 5.01

Explanation:

A weak acid, HX, reacts with NaOH as follows:

HX + NaOH → NaX + H2O

Where 1 mole of HX reacts with 1 mole of NaOH

To solve this question we need to find the moles of NaOH at equivalence point (Were moles HX = Moles NaOH).

18.50mL = 0.01850L * (0.20mol / L) = 0.00370 moles NaOH = Moles HX

In 20.0mL = 0.0200L =

0.00370 moles HX / 0.0200L = 0.185M HX

The equilibrium of HX is:

HX(aq) ⇄ H⁺(aq) + X⁻(aq)

And Ka is defined as:

Ka = [H⁺] [X⁻] / [HX]

Where [H⁺] = [X⁻] because comes from the same equilibrium

As pH = 2.87, [H+] = 10^-pH = 1.349x10⁻³M

Replacing:

Ka = [H⁺] [H⁺] / [HX]

Ka = [1.349x10⁻³M]² / [0.185M]

Ka = 9.836x10⁻⁶

pKa = -log Ka

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

Finally we calculate the required mL of suspension, using its concentration:

Answer:

If a standard iodine solution is used as a titrant for an oxidizable analyte, the technique is iodimetry. If an excess of iodide is used to reduce a chemical species while simultaneously forming iodine.

Iodine always used in a solution excess KI is given to aid in the solubilization of free iodine, which would be insoluble in clean water during normal circumstances.

Iodine is a kind of element which are mainly used in iodometry titration. It can be represented by I.

A solution would be a homogenous mixture of two components, usually a solute as well as a solvent.

Iodimetry would be a technique that uses a standard iodine solution as a titrant for such an oxidizable analyte. When an excessive amount of iodide is used to decrease a chemical while somehow producing iodine.

To know more about iodine and solution

https://brainly.com/question/16867213

#SPJ2

Answer: The equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Explanation:

The equilibrium constant is defined as the ratio of the concentration of the products to the concentration of reactants each raised to the power of their stoichiometric coefficients.

The concentration of all the solids and liquids are considered to be 1 in the expression of equilibrium constant

For the given chemical equation:

[tex]2KClO_3(s)\rightleftharpoons 2KCl(s)+3O_2(aq)[/tex]

The expression of equilibrium constant follows:

[tex]K_{eq}=[O_2]^3[/tex]

Hence, the equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Answer:

Explanation:

Hope this helps

Answer:

it would be option C

Explanation:

Speed of light = 3×10^8m/s

Planck's constant = 6.626×10^-34 Js

Wavelength = 8 x 10^-9 m

Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9

Energy = [19.878×10^(8-34)] / 8 x 10^-9

Energy = 2.48475 × 10^(-26+9)

Energy = 2.48×10^-17 J

Explanation:

If there are 15 protons, 15 nuclear particles of unit positive charge, then

Z

=

15

. Now

Z

≡

the atomic number

, and you look at your copy of the Periodic Table, and you find that for

Z

=

15

, the element phosphorus is specified.

But we are not finished. Along with the 15 defining protons, there are also 16 neutrally charged, massive nuclear particles, 16 neutrons, and the protons and neutrons together determine the atomic mass. The isotope is thus

31

P

, which is almost 100% abundant, and an important nucleus for

NMR spectroscopy.

Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.

HOPE IT HELPS❤️

Answer:

[tex]C_3H_7O_3[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to infer that the empirical formula of mannitol contains carbon, hydrogen and oxygen, so that the first step is to calculate the moles of C and H contained in the CO2 and H2O, respectively, as the only sources of these two elements in the formula:

[tex]n_C=1.993gCO_2*\frac{1molCO_2}{44.01gCO_2}*\frac{1molC}{1molCO_2} =0.0453molC\\\\n_H=0.9519gH_2O*\frac{1molH_2O}{18.02gH_2O}*\frac{2molH}{1molH_2O} =0.106molH[/tex]

Next, we calculate the grams and moles of O by subtracting the mass of C and H from the mass of the sample:

[tex]m_O=1.375g-0.0453molC*\frac{12gC}{1molC}-0.106molH*\frac{1.01gH}{1molH}=0.724gO\\\\n_O=0.724gO*\frac{1molO}{16.0gO} =0.0453molO[/tex]

Finally, we divide the moles of C, H and O by 0.0453 as the fewest moles of both C and O to find the mole ratios in the formula:

[tex]C:\frac{0.0453mol}{0.0453mol} =1\\\\H:\frac{0.106mol}{0.0453mol} =2.34\\\\O:\frac{0.0453mol}{0.0453mol} =1[/tex]

To get:

[tex]CH_{2.34}O[/tex]

Which must be multiplied by 3 to get whole numbers for all the subscripts, and therefore obtain:

[tex]C_3H_7O_3[/tex]

Regards!

Answer: The mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Explanation:

The given balanced reaction equation is as follows.

[tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex]

Here, the mole ration of Al and hydrogen produced is 2 : 3

As mass of aluminum is given as 26.98 g. So, moles of aluminum (molar mass = 26.98 g/mol) is as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{26.98 g}{26.98 g/mol}\\= 1 mol[/tex]

So, when 1 mole of Al reacted then 1.5 moles of hydrogen is produced as per the given mole ratio.

Therefore, mass of hydrogen formed is calculated as follows.

[tex]mass = moles \times molar mass\\= 1.5 mol \times 2.02 g/mol\\= 3.03 g[/tex]

Thus, we can conclude that the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Answer:

solo I

Explanation:

Según esta teoría para que se produzca una reacción deben cumplirse tres condiciones: Las moléculas de los reactivos tienen que chocar entre sí. Estos choques deben de producirse con energía suficiente de forma que se puedan romper y formar enlaces químicos.

Answer:

[tex]m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Explanation:

Hello there!

In this case, if we consider the following chemical reaction, whereby Al2O3 is produced from Al and FeO:

[tex]3FeO+2Al\rightarrow 3Fe+Al_2O_3[/tex]

Thus, since there is 3:1 mole ratio of FeO to Al2O3, it turns out feasible for us to use their molar masses, 71.844 g/mol and 101.96 g/mol respectively, to obtain the grams of the latter as follows:

[tex]m_{Al_2O_3}=250.gFeO*\frac{1molFeO}{71.844gFeO}*\frac{1molAl_2O_3}{3molFeO} *\frac{101.96gAl_2O_3}{1molAl_2O_3}\\\\m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Regards!

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

We input the given data:

And solve for n:

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

Answer:

Cu

Explanation:

Groups 3 - 12 (or groups IIA - IIB) of the periodic table contain transition elements. Transaction elements start from period four (4) of the periodic table. The phrase alludes to the fact that the d sublevel is filling at a lower main energy level than the s sublevel that came before it.

The transition elements' arrangement is inverted from the fill order, with the 4 s filled prior to the actual 3 d begins. The transition elements are commonly referred to as transition metals since they are all metals. They are less reactive than the metals in Groups 1 and 2 and have normal metallic characteristics.

From the options given Cu is the only transition metal in the fourth period on the periodic table.

Answer: A. 142.04 g/mol

Explanation:

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Answer:

154 g

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP

At STP, 1 mole of N₂ occupies 22.4 L.

79.5 L × 1 mol/22.4 L = 3.55 mol

Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂

The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.

Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃

The molar mass of NaN₃ is 65.01 g/mol.

2.37 mol × 65.01 g/mol = 154 g

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

Answer:

ethyl ethanoate and water

Explanation:

At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.  

Ethyl liquor and water are two miscible fluids.   Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.

The answer is ethyl ethanoate and water. Hope this helps you!

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support

Equilibrium shifts to the right.

OPTION A

Answer:

5–bromo–9–chlorodecane

Explanation:

To name the compound given above, the following must be obtained:

1. The longest continuous carbon chain. This gives the parent name of the compound.

2. The substituent group attached to the compound.

3. Position of the substituent group.

4. Combine the above to obtain the name.

Now, we shall determine the name of the compound as follow:

1. The longest continuous carbon chain is 10. Thus, the parent name of the compound is decane.

2. The substituent groups attached to the compound are:

I. Bromine (Br) => Bromo

II. Chlorine (Cl) => Chloro

3. The position of the substituent groups are:

I. Br => carbon 5

II. Cl => carbon 9

NOTE: numbering is done alphabetically.

4. Therefore, the name of the compound is:

5–bromo–9–chlorodecane

Answer:

A.

Explanation:

I chose this answer and it was correct ‍♀️

Answer: