Given the force diagram of the basketball, what can you tell about the basketball motion?

Given The Force Diagram Of The Basketball, What Can You Tell About The Basketball Motion?

Answers

Answer 1

Newton's laws allow to find the result for the movement of the basketballl:

On the vertical axis the ball is on the ground. On the horizontal axis the ball is accelerating in the direction of the pushing force.

Newton's laws establish the relationship between the forces on objects:

The 1st law states that if the net force is zero the object is stationary or with constant speed. The 2nd law gives a relation of the force with the mass and the acceleration of the body. The 3rd. Law states that the force appears in pairs, one on each body with the same magnitude, but in the opposite direction.

Let's apply these principles to the ball's motion diagram.

The two vertical forces are in the opposite direction, one is due to the weight of the body and the other is the attraction of the earth to the support of the ball, they are of equal magnitude, not their action-reaction force and reluctant because it is applied to the same body

       In conclusion we can say that the ball is on the ground.

The two horizontal forces are in the opposite direction, the thrust force is greater than the friction therefore using Newton's second law the ball must be accelerating in the direction of the thrust force.

       In conclusion we can say that the ball is accelerating in the direction of the pushing force.

In conclusion using Newton's laws we can find the result for the motion of the basketball:

On the vertical axis the ball is on the ground. On the horizontal axis the ball is accelerating in the direction of the pushing force.

Learn more about Newton's laws here:  brainly.com/question/3715235


Related Questions

Two students were climbing stairs at school. Student 1 has a weight of 700 N. Student 2 has a weight of 650 N. How much power would each student have if each took 6 s to climb a 4 m tall flight of stairs?

Student 1 would have 4200 W, and Student 2 would have 3900 W of power.

Student 1 would have 116 W, and Student 2 would have 108 W of power.

Student 1 would have 2800 W, and Student 2 would have 2600 W of power.

Student 1 would have 467 W, and Student 2 would have 433 W of power.

Answers

Student 1 would have a power 467 W and student 2 would have a power of 433 W. The correct option is the fourth option - Student 1 would have 467 W, and Student 2 would have 433 W of power.

From the question,

We are to calculate the power each student would have to climb the flight of stairs.

Power can be calculated using the formula

[tex]P = \frac{F \times d}{t}[/tex]

Where

P is Power

F is the force

d is the distance

and t is the time

NOTE: The weight of the students represent the force

For student 1

F = 700 N

d = 4 m

t = 6 s

∴ [tex]P = \frac{700 \times 4}{6}[/tex]

P = 467 W

For student 2

F = 650 N

d = 4 m

t = 6 s

∴ [tex]P = \frac{650 \times 4}{6}[/tex]

P = 433 W

Hence, Student 1 would have a power 467 W and student 2 would have a power of 433 W. The correct option is the fourth option - Student 1 would have 467 W, and Student 2 would have 433 W of power.

Learn more here: https://brainly.com/question/18801566

Which of the following best describes an achievement test that is given at the end of a learning segment to evaluate mastery of objectives?

Answers

Answer

An Achievement test is an assessment of developed knowledge or skill. ... Achievement tests are developed to measure skills and knowledge learned in a given grade level, usually through planned instruction, such as training or classroom instruction. Achievement tests are often contrasted with aptitude tests.

Explanation:

can you classify matter based on chemical properties

Answers

Answer:

Explanation:

Matter can be broken down into two categories: pure substances and mixtures. Pure substances are further broken down into elements and compounds. Mixtures are physically combined structures that can be separated into their original components. A chemical substance is composed of one type of atom or molecule.

Calculate the amount of work done (in joules) to raise the 0.2kg mass 0.5 m

Answers

Answer:

1

Explanation:

A=mgh=0.2*10*0.5=1 J

Name two environmental factors, one natural and one human-made, that could account for the trend or pattern in bird (quail, wren) and rodent (mice, rabbits) populations before 1997. Help!

Answers

Factors such as more crops, fewer predators, invasive species, and changes in the environment explain a decrease or increase in the birds and rodent populations.

Before 1997, both rodents and birds populations increased due to different factors. Moreover, these factors can be classified as natural or human-made factors. Here are the factors that mainly affected these animals:

Bird population:

Increase:

Decrease in predators that increase birds chances to survive (natural factor)

Increase in crops that improve food access for birds (human factor)

Decrease:

Invasive species or increase of predators (natural factor)

Destruction of natural habitats due to an increase in industry and extraction (human factor)

Rodent population:

Increase:

More adaptability that increased rodents chances to survive (natural factor)Increase in crops that improve food access for rodents (human factor)

Decrease:

Invasive species or increase of predators (natural factor)Increase in rabbit consumption and use of rodent control products (human factor)

Learn more in: https://brainly.com/question/18123593

9. The acceleration (a)-time (t) graph of a particle moving in a straight line is as shown in figure. At time t = 0, the velocity of particle is 10 m/s. What is the velocity at t = 8 s?
(1) 2 m/s
(2) 4 m/s
(3) 10 m/s
(4) 12 m/s​

Answers

Answer:Acceleration - time graph for a particle moving in a straight line is as shown in figure. Change in velocity of the particle from t = 0 to t = 6s is:-.

1 answer

·

Top answer:

Change in velocity = (sum of area of graph) = ( 12 × 4 × 4 ) + ( 12 × ( + 2) ( - 1) ) - 4 = 8 - 4 = 4 x

Explanation:

If work stays the same and the distance is increased, then less force is needed to do the work.
True
False

Answers

Not sure what “work” defines but from my understanding I’d go with false.

Answer:

False

Explanation:

This is because the work is the same so the force won't change

A 30.0-g object moving to the right at 20.5 cm/s overtakes and collides elastically with a 13.0-g object moving in the same direction at 15.0 cm/s. Find the velocity of each object after the collision. (Take the positive direction to be to the right. Indicate the direction with the sign of your answer.)

Answers

Let m₁ and m₂ be the masses of the two objects, and v₁ and v₂ their initial velocities. So

m₁ = 30.0 g = 0.0300 kg

m₂ = 13.0 g = 0.0130 kg

v₁ = + 20.5 cm/s = 0.205 m/s

v₂ = + 15.0 cm/s = 0.150 m/s

and we want to find v₁' and v₂', the final velocities of either object after their collision.

Momentum is conserved throughout the objects' collision, so that

m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'

where v₁' and v₂' are the first and second object's velocities after the collision.

Kinetic energy is also conserved, so that

1/2 m₁v₁² + 1/2 m₂v₂² = 1/2 m₁(v₁')² + 1/2 m₂(v₂')²

or

m₁v₁² + m₂v₂² = m₁(v₁')² + m₂(v₂')²

From the first equation (omitting units), we have

0.0300 • 0.205 + 0.0130 • 0.150 = 0.0300 v₁' + 0.0130 v₂'

0.0810 = 0.0300 v₁' + 0.0130 v₂'

81 = 30 v₁' + 13 v₂'

From the second equation,

0.0300 • 0.205² + 0.0130 • 0.150² = 0.0300 (v₁')² + 0.0130 (v₂')²

0.00155 ≈ 0.0300 (v₁')² + 0.0130 (v₂')²

1.55 ≈ 30 (v₁')² + 13 (v₂')²

Solving both equations simultaneously gives two solutions, one of which corresponds to the initial conditions. The other yields

v₁' ≈ + 0.172 m/s

and

v₂' ≈ + 0.227 m/s

What happened when a lobster release a claw? a. The lobster attacks with the claw. b. The lobster let the claw go. C. The lobster bites off the claw. D. The lobster eats with the claw.

Answers

Answer:b

Explanation:

Answer:

The lobster let the claw go. so, B.

Explanation:

i hope this helps.

which of the following statements describes a perfectly inelastic collision

Answers

Answer: An ice hockey player picks up a trophy as he slides past it.

Two pool balls colliding precisely inelastically and rebounding off one another is an example. So, the correct option is A.

What is an Inelastic collision?

Inelastic collisions are those in which the total kinetic energy is lower after the impact than it was before. The stick is travelling quickly in the direction of the ball before to the contact. The stick comes to a stop following the accident. It transfers some of its kinetic energy to the cue ball, which rolls forward.

The type of collision mentioned in the given example is known as an inelastic collision is one in which the system's momentum is preserved but its kinetic energy is not. In a ballistic pendulum, an example of an inelastic collision. Dropped ball of clay is another illustration of an inelastic collision.

Thus, the correct option is A.

Learn more about Inelastic collision, here:

https://brainly.com/question/15742157

#SPJ7

Your question is incomplete, most probably the complete question is:

Which of the following statements describes a perfectly inelastic collision?

A. Two billiard balls bounce off of each other,

B. A car crashes into a tree and rebounds in the other direction,

C. A wad of chewing gum is thrown and sticks to a moving truck,

D. Two ice skaters hit each other and fall over in opposite directions,

PLEASE HELP ME GET THIS RIGHT

Answers

Explanation:

I'm not sure, but I would go for the more than A since its orbital speed is at its fastest and the sweep occurs in about the same period of days.

In which of the following situations is the Doppler Effect absent?



The source and the observer are moving towards each other.



The observer is moving toward the source.



The source is moving away from the observer.



The source and the observer are both moving with the same velocity.

Answers

Answer:

Correct option is

C

The listener is moving towards the source of sound

The Doppler effect (or the Doppler shift) is the change in frequency or wavelength of a wave (or another periodic event) for an observer moving relative to its source.

So if both listener and source of sound are stationary or are moving with the same velocity that is relative velocity is zero, there won't be any change in frequency.

Thus, in this case, the effect will arise when a listener is moving towards the source of the sound.

A 27 kg chair initially at rest on a horizontal
floor requires a 173 N horizontal force to set
it in motion. Once the chair is in motion, a
148 N horizontal force keeps it moving at a
constant velocity.
The acceleration of gravity is 9.81 m/s.
a) What is the coefficient of static friction
between the chair and the floor?

Answers

Answer:

4653

4565445655687568677667876

Please write a paragraph explaining the bible verse below in your own words.

Exodus 16:19-20

Answers

Answer:

Moses had told them to not keep the food till morning but some kept some anyways because they probably thought they were going to starve or not have food the next morning but what I think it means is that you have to trust in God that he will provide for you and so when the people kept the food cuz he thought they were probably going to start of the next day it got maggots

A car of mass 5000 kg was initially moving at 100 km/h and stops at a distance of 55 m. Find the
magnitude of the net force (in N) acting to stop the car.

Answers

Answer:

 |F| = 35 kN

Explanation:

a = F/m

100 km/hr(1000 m/km / 3600 s/hr) = 27.8 m/s

v² = u² + 2as

   a = (v² - u²) / 2s

F/m = (v² - u²) / 2s

   F = m(v² - u²) / 2s

   F = 5000(0² - 27.8²) / 2(55)

   F = - 35,072.9517...

The Greek root astro means "stars." Use the context clues to choose the correct definition of the word astronomer. According to the astronomer, the bigger the telescope, the more detail we can see in the images. O A. a person who studies astronauts O B. a person who studies the stars O C. a person who tells the future O D. a person who studies other people​

Answers

Answer:

b, it's a pretty easy explanation

Comparing energy resources

Answers

you’re gonna wanna circle the first 5 at the top and do the bottom ones last

2.(01.01 LC)
Which of the following is true for gravitational force? (3 points)
Decreases with increase in mass
Increases with increase in mass
Increases with increase in distance
Decreases with decrease in distance

Answers

Answer:

Increases with increase in mass

Explanation:

gravity is proportional to mass and inversely proportional to the square of the distance between them

F = GMm/d²

On clear day, sunlight delivers approximately 1000 J each second to a 1 m2 surface; smaller areas receive proportionally less--half the area receives half the energy. A 12% efficient solar cell, a square 12 cm on a side, is in bright sunlight.

How much electric power does it produce?

Answers

The direct proportions rule allows to find the result for the energy produced by a solar cell is:

        E = 1,728 J

       

The efficiency of a solar cell is the percentage of incident energy that transforms into electricity.

The direct  proportions rule or three rule stable that if two quantities are proportional the product remains constant.

They indicate that the length of the solar cell is l = 12 cm = 0.12m. Let's find the area of ​​the solar cell.

        A = l²

        A = 0.12²

        A = 1.44 10⁻² m²

Let's use a direct proportion rule. If 1 m² receives 1000J of energy, how much does an area of ​​1.44 10⁻² m² receive?

        Energy_cell = 1000 J ( [tex]\frac{1.44 \ 10^{-2}}{1}[/tex] )

        Energy_ cell = 14.4 J

Let's use another direct ratio rule for efficiency.

       [tex]Energy_{produced} = Energy_{cell} \frac{12}{100} \\Energy_{produced} = 14.4 0.12 \\Energy_{produced} = 1.728 J[/tex]

   

In conclusion using the direct proportions rule we can find the result for the energy produced by a solar cell is:

        E = 1,728 J

Learn more here:  https://brainly.com/question/11918400

Croquet ball A moving at 8.3 m/s makes a head on collision with ball B of equal mass and initially at rest. Immediately after the collision ball B moves forward at 6.4 m/s .

What fraction of the initial kinetic energy is lost in the collision?

Answers

Answer:

0.25

Explanation:

That is the right answer.

The fraction of the initial kinetic energy is lost in the collision is 35.3%.

The given parameters:

Initial velocity of ball A = 8.3 m/sInitial velocity of ball B = 0Final velocity of ball B = 6.4 m/s

The initial kinetic energy of the system collision is calculated as follows;

[tex]K.E_i = \frac{1}{2} mv_1_i^2 + \frac{1}{2} mv_2_i^2\\\\K.E_i = \frac{1}{2} (m)(8.3)^2 + \frac{1}{2} (m) (0)^2\\\\K.E_i = 34.445 m[/tex]

The final velocity of ball A after collision is calculated as follows;

[tex]u_1 + v_1 = u_2 + v_2\\\\8.3 + v_1 = 0 + 6.4\\\\v_1 = 6.4 - 8.3\\\\v_1 = -1.9 \ m/s[/tex]

The final kinetic energy of the system after collision is calculated as follows;

[tex]K.E_f = \frac{1}{2} m(-1.9)^2 + \frac{1}{2} m(6.4)^2\\\\K.E_f = 22.285 \ m \[/tex]

The fraction of the initial kinetic energy is lost in the collision is calculated as follows;

[tex]= \frac{K_i - K_f}{K_i} \\\\= \frac{34.445 - 22.285}{34.445} \\\\= 0.353\\\\= 35.3\%[/tex]

Learn more about kinetic energy of elastic collision here: https://brainly.com/question/7694106

WILL MARK BRAINLIEST

1. What is the difference between distance and displacement?
A. Distance is measured in feet. Displacement is measured in meters

B. Distance is the difference between how quickly you move between two points. Displacement is the average of that motion

C. Distance is a measure of length of travel. Displacement is the measure of the time it takes to move that length

D. Distance is the length of travel. Displacement is the straight line distance between the starting point and the ending point

2. When forces are in opposite directions, they subtract from one another
A. True
B. False

3. When two forces are in opposite directions, and they are the exact same magnitude, the forces will
A. Subtract from each other
B. Cancel Out
C. Go on Infinitely
D. eventually reach equilibrium

4. Acceleration is a change in motion over time
True or False

Answers

Answer:

1. C

2. True

3. D

4. True

Explanation:

While distance refers to “how much land an object has traversed throughout its journey,” displacement measures “how far an object is out of place.” In this post, let's look at the difference between distance and displacement. Thus, option C is correct.

What are the distance and displacement?

Displacement and distance are two distinct ideas. The total distance travelled is larger than the displacement between those two points if an object changes direction while travelling.

Distance is the length of any path connecting any two places. Displacement is the straight-line distance between any two points when calculated along the shortest route.

Therefore, The direction is ignored when calculating distance. The direction is accounted for in the displacement calculation.

Learn more about displacement here:

https://brainly.com/question/11934397

#SPJ2

2. Match the term to the definition
1. Reversibility
a. A break between activities during a workout.
2. Overload
3. Progression
4 Duration
5. Rest
b. Length of an individual workout.
c. The Improvement seen when you are training will be lost if you stop
training.
d. Moving forward through a sequence to gradually build up the body.
e Number of training sessions per week.
f. Level of difficulty of your workout.
9. Improvements will only be seen in the areas that you work on.
h The time between workouts that allows your body to heal and adapt to
the stress from your workout.
6. Recovery
7. Frequency
8. Specificity
1. Increase the amount of stress you put on your body.
9. Intensity

Answers

A is rest
B is duration
C is reversibility
D is progression
E is frequency
F is intensity
G is specificity
H is recovery
I is overload
Reversibility is the over load of the progression

What are the two factors that affect the frictional force between objects

Answers

Answer: The factors that affect the friction between two surfaces are the weight of the object and the coefficient of friction of the surface.

what is translator disadvantage?​

Answers

Machine translators:

Level of accuracy can be very low.

Accuracy is also very inconsistent across different languages.

Machines can't translate context.

Mistakes are sometimes costly.

Sometimes translation simply doesn't work.

Human translators:

Turnaround time is longer.

Translators rarely work for free.

Unless you use a translation agency, with access to thousands of translators, you're limited to the languages any one translator can work with.

Two point particles, with masses m and 2 m, are separated by some distance Lin an uniform gravitational field. The center of gravity of this two particle system is:________
А. located L/2 distance away from either mass and on the line joining the two particles.
B. located 1/3 distance away from 2 m and on the line joining the two particles.
C. located L/4 distance away from 2 m and on the line joining the two particles.
D. located L/3 distance away from mand on the line joining the two particles.
E. located L/4 distance away from m and on the line joining the two particles.
F. located where the mass 2 m is located.

Answers

The center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

The given parameters:

Mass of the first particle, = mMass of the second particle, = 2mDistance between the two particles, = L

The center of gravity of the two particles when first particle is fixed is calculated as;

[tex]C_G = \frac{m(0 ) \ +2m(L) }{m+ 2m} \\\\C_G = \frac{2mL}{3m} \\\\C_G = \frac{2L}{3}[/tex]

The center of gravity of the two particles when second particle is fixed is calculated as;

[tex]C_G = \frac{m(L) \ + \ 2m(0)}{m + 2m} \\\\C_G = \frac{mL}{3m} \\\\C_G = \frac{L}{3}[/tex]

Thus, the center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

Learn more about center of gravity here: https://brainly.com/question/874205

Calculate the torque produced by a 50.0 N perpendicular force at the end of a 0.300 m long wrench.

Answers

Answer:

Torque = 50N x 0.3m = 15Nm

Explanation:

Torque = Force x length of lever arm. To obtain the torque simply multiply the two given values.

Which of the following methods of pest control used in IPM systems is effective because of the increase in biological diversity it provides? timed crop planting O weed suppression composted soil amendments deep tilling soil​

Answers

Answer:

Decline in soil health is a serious worldwide problem that decreases complexity and stability of agricultural ecosystems, commonly making them more prone to outbreaks of herbivorous insect pests. Potato (Solanum tuberosum L., Solanaceae) and onion (Allium cepa L., Amaryllidaceae) production is currently characterized by high soil disturbance and heavy reliance on synthetic inputs, including insecticides. Evidence suggests that adopting soil conservation techniques often (but not always) increases mortality and decreases reproductive output for the major insect pests of these important vegetable crops. Known mechanisms responsible for such an effect include increases in density and activity of natural enemy populations, enhanced plant defenses, and modified physical characteristics of respective agricultural habitats. However, most research efforts focused on mulches and organic soil amendments, with additional research needed on elucidating effects and their mechanisms for conservation tillage, cover crops, and arbuscular mycorrhizae.

Introduction

Soil erosion is a serious problem worldwide (Amundson et al., 2015). Although it is often overshadowed in public discourse by other concerns, such as climate change and invasive species, soil deterioration receives considerable attention from the scientific community (Montgomery, 2007; Borrelli et al., 2017; Berhe et al., 2018). In addition to the loss of agricultural productivity, soil erosion has been linked to increased emissions of greenhouse gases and reduced water quality (Amundson et al., 2015; Berhe et al., 2018). Global soil erosion is forecasted to increase in the near future because of cropland expansion, especially in the least economically developed areas (Borrelli et al., 2017).

a wave travels at a constant speed. how does the wavelength change if the frequency is reduced by a factor of 3? assume the speed of the wave remains unchanged.
A. the wavelength decreases by a factor of 3
B. the wavelength does not change
C. the wavelength increases by a factor of 3
D. the wavelength increases by a factor of 9

Answers

Answer:

b

Explanation:

when the wavelength increase it doesnt affect the frequency of a wave.

Answer: The wavelength increases by a factor of 3

Explanation:

If you represented Earth's history by a line that is 1 m long, how long a segment (in cm) would represent the 400 million years since life moved onto the land

Answers

The length of the segment that will represent the 400 million years is 8.8 cm.

The given parameters:

length of age of the Earth = 1 meter longage of the Earth = 4.54 billion yearstime to be represented in the given segment = 400 million years

The length of the segment that will represent the 400 million years is calculated as follows;

4.54 billion years ------------- 1 m

400 million years ------------- ?

[tex]\frac{1 \ m}{4.54 \times 10^9 \ years} \times 400 \times 10^6 \ years = 0.088 \ m[/tex]

The length of the segment in centimeters (cm) is calculated as follows;

[tex]= 0.088 \ m \times 100 \ cm\\\\= 8.8 \ cm[/tex]

Learn more here:https://brainly.com/question/19471802

HIHIHHHHHHHHIHIHIIHIHHHHIHIHIHIHIHIHIHIHIHIHIHIHIHIIH

Answers

Lana rhoades is the best

Answer:

Ok thanks for the points though

Explanation:

Other Questions
What is the rhyme scheme of this poem? My favorite food is stew.Ive got it in my headThat you might like it too,Or maybe you like bread. A. ababB. abba C. aaaaD. aabb 17.In the reaction N2 + 3H2 2NH3 how many moles of ammonia will be produced from 1.30 molof hydrogen and excess nitrogen? Does anyone know this? Draw triangle GMTPLS CREATE DRAWING!! refer to attachment does anyone know how to find the electron configuration of an element without using a periodic table?? group and period is already given what is the name of the spot where man first walked on the moon HELP ME!! Move the terms to their corresponding categories. Either Domain or Range. How can offspring be created that have a specific phenotype and genotype? Does this represent a function? Jared has not read the chapter on psychological disorders, so he misunderstands some basic facts. For example, he believes that schizophrenia refers to a multiple personality split rather than a: a. split in personality. b. split from reality. c. split from one's peers. d. defense mechanism. Find the least 2-digit whole number N so that the sum 2^9+2^4+N is a perfect square. What is the slope of the line that passes through the points (-6, -8)and (-14, 4) ? Write your answer in simplest form. Use a calculator to find log 0.0019. round answer to 2 decimal places A solution containing cacl2 is mixed with a solution of li2c2o4 to form a solution that is 2. 1*10^-5m in calcium ion and 4. 75*10-5 m in oxalate ion. What will happen once these solutions are mixed?\. When did the first rocket ship get launched The lawmaking responsibility of the members of the house is to. Sarah has written an outline for an essay one of the bullet points shows the education public about the importance of using seatbelts convince more people to use them in which part of the outline can this idea Please helpppp I will mark you branliest pleaseee Problem example: For the given sequence: -2,2,6,10,14,18Write a recursive formula to find the nth term: a = an-1+4Write a explicit formula to find the nth term: a = -2 + 4(n-1)What is the 64th term in the sequence? A package contains 12 ounces of cereal .If you use 1 portion of this cereal which is 1 1/3 how much would be left in the cereal box?