Answer: The nuclear symbol of an isotope indicates the number of protons and neutrons in an atom of the element. It does not indicate the number of electrons. The number of neutrons is not stated. Instead, you have to figure it out based on the number of protons or atomic number.
Explanation:
brain me
the basic fact that determines molecular shapes is that
Answer:
The shape of a molecule is mostly determined by repulsion among the pairs of electrons around a central atom.
Chemical & Earth Science Name:______________________________________
Date: ________________________________
Nonmetals & Metalloids Worksheet
Write the letter of the correct answer on the line at the left.
1. _____ Which of the following is NOT a
property of most nonmetals?
A found on the right side of the
periodic table
B solids tend to be dull and brittle
C excellent electric conductivity
D many are gases at room temperature
3. _____ Two of the same atoms bonded
together is called a(n)
A isotope
B diatomic molecule
C binary atom
D semiconductor
2. _____ The only nonmetal in Group 14 is
A carbon
B oxygen
C nitrogen
D fluorine
4. _____ The highly reactive nonmetals of
Group 17 are called the
A noble gases
B metalloids
C halogens
D actinides
If the statement is true, write true. If the statement is false, change the underlined word
or words to make the statement true.
5. ___________________ Atoms of nonmetals usually lose electrons when they combine
with other atoms.
6. __________________ When two or more atoms bond by sharing electrons, they form
a molecule.
7. __________________ The elements that have some properties of metals and some
properties of nonmetals are called halogens.
8. __________________ Helium has chemical properties so different from those of the
other elements that it cannot be placed in any group.
9. __________________ Substances that can carry electric current under some
conditions but not under others are called semiconductors.
10. __________________ The Group 15 element oxygen is used to make compounds
known as fertilizers.
Answer:
whoa this question is long
Explanation:
how did u write it gosh
Suppose that you experimentally determine the molar extinction coefficient (ε) of a complex ion sample to be 8171 L/mol-cm at 510 nm. The literature value for the ε of the complex ion sample is reported as 8400 L/mol-cm. What is the percent purity of your experimental sample
The percent purity of your experimental sample is 97.3 %
The percentage purity % = impure value/pure value × 100 %.
Actual value of molar extinction coefficient = impure value = 8171 L/mol-cm, pure value = literature value = 8400 L/mol-cm.
Substituting the values of the variables into the equation, we have
% purity = 8171 L/mol-cm/8400 L/mol-cm × 100 %
% purity = 0.9727 × 100 %
% purity = 97.27 %
% purity ≅ 97.3 %
The percent purity of your experimental sample is 97.3 %
Learn more about percentage purity here:
https://brainly.com/question/17836636
This table displays which one is it A. Price values of the metals ,B. Physical properties of the metals ,C. Chemical properties of the metals ,D. Corrosive resistance of the metals
Answer:
b the physical components
4NaCl + 2SO2 + _____H2O + _____O2 → _____Na2SO4 + 4HCl
Which numbers balance this equation?
- 1,2,4
- 1,2,2
- 2,1,2
- 2,1,4
The numbers that balance the following equation: 4NaCl + 2SO2 + H2O + O2 → Na2SO4 + 4HCl is 2, 1, 2.
BALANCING EQUATION:
Balancing a chemical equation means to make sure that the number of atoms of each element on both sides of the equation are equal. According to this question, the following chemical reaction are given: 4NaCl + 2SO2 + H2O + O2 → Na2SO4 + 4HCl Some of the coefficients (numbers) have been placed there while some are missing. The equation that includes the missing coefficients (numbers) to balance the equation is:4NaCl + 2SO2 + 2H2O + O2 → 2Na2SO4 + 4HCl
Learn more at: https://brainly.com/question/21049751?referrer=searchResults
Answer:212
Explanation:yeah
how many moles are present in 10.0 grams of sodium hydroxide
Answer:
0.25
Explanation:
no.of moles =10/40
balance CHCl3 + O2 = CO2 + H2O + Cl2
Answer:
2CHCl3 + 5/2 O2 => 2CO2 + H20 + 3Cl2
Explanation:
Left Hand Side(LHS)
We have CHCl3 and O2
Right Hand Side(RHS)
We have CO2, H2O and Cl2
Balancing
To make sure that they have same values, put 2 before CHCl3 giving 2CHCl3 and 3 on Cl2(RHS) for chlorine gas giving 3Cl2
H2O remains the same
Before CO2 put 2 giving 2CO2
To make sure that oxygen is balanced put 5/2 before it. This gives 5/2 O2 (2 cancels out don't worry)
Combining all;
2CHCl3 + 5/2 O2 => 2CO2 + H20 + 3Cl2
I hope this helps. Have a nice studies.
please help pick more then one answer!!!
Select all the correct answers.
How will the results of the Human Genome Project benefit the future of genetics? (Select all that apply.)
A. Scientists can develop better diagnostic methods for genetic diseases.
B. Scientists can successfully prevent the occurrence of genetic diseases in humans.
C. Scientists can prevent the process of human aging.
D. Scientists can compare the genomes of humans and other different organisms.
E. Scientists can produce organisms more superior than humans.
Answer: A. B.
Explanation:
Which of the following is similar in size to an atom?
O A ball used in sports, such as a basketball
O A large building, similar to a shopping mall
O A particle you cannot see with your eyes
O A seed of a fruit from an apple or orange
What can you say about the reactants of photosynthesis and the products of cellular respiration?
Answer:
The reactants of cellular respiration are oxygen and sugar, which are the products of photosynthesis
Explanation:
An unknown element X forms a compound with chlorine: XCL2. Predict the chemical formula of the compound that element X makes with oxygen. Justify your answer.
water is formed when 48g of oxygen combine with 6g of hydrogen. what mass of oxygen combines with 2g of hydrogen
Answer:
16g of oxygen reacts with 2 g of hydrogen to form 18g of Water
How does Bone Marrow Donor Program work?
Name some diseases that can be cured by bone marrow transplant.
What is Donors’ Registry Program?
noooooooooooooooooooooo
Carbon tetrachlordie (CCI4) is ___
A. iconic
B. Covalent
Answer:
b
Explanation:
Water is continuously changing state and moving from place to place in the water cycle. This diagram shows these processes and movements. (Bro there's no science AHHHH)
Answer: bro- i have no idea wat science that is but heres the water cycle-
.
Approximately now much energy will it take to
break all the bonds present in the molecule below?
Answer:
498 kj/mol
Explanation:
Chemical reactions occur as a result of bond breaking and bond formation.
The bonds in reactants are broken and atoms are rearranged to form new bonds.
During bond breaking energy is absorbed to break the bonds of reactants while bond formation involves the release of energy during the formation of new bonds.
In our case;
In 1 mole of the Oxygen molecule, there is one O=O bond
Energy absorbed to break O=O is 498 kJ/mol
Therefore, the ΔH required to break all the bonds in one mole of Oxygen(O₂) molecules is 498kJ/mol.
Note that, bond breaking is endothermic since energy is absorbed from the surroundings.
mark brainliest pls
Element with the largest electron cloud
Out of the answer choices, rubidium has the highest energy valence shell. With a single electron in the fifth energy level, krypton will have the highest number of energy levels of the group I elements listed.
kasama na po jan ang explenation
Word Equation for Magnesium reacting with Iron Chloride
Answer:
3Mg+2FeCl3------------3MgCl2+ 3Fe
suitable electrolytes for fuel cells
Answer:
Alkaline fuel cells use an alkaline electrolyte such as potassium hydroxide or an alkaline membrane that conducts hydroxide ions rather than protons.
Explanation:
OR USE GATORADE AND POWERADE. BE A MAN.
When a substance is heated ,the kinetic energy of its molecules
Answer:
When a substance is heated ,the kinetic energy of its molecules also increase.
Explanation:
K.E is directly proportional to T
Is cobalt(II)oxide ionic or covalent
[tex]\small{\green}\fcolorbox{blue}{cyan}{\bf{\underline{\red{\color{red}Answer}}}}[/tex]
[tex]{\huge{\fcolorbox{yellow}{red}{\orange{\boxed{\boxed{\boxed{\boxed{\underbrace{\overbrace{\mathfrak{\pink{\fcolorbox{green}{blue}{Ionic}}}}}}}}}}}}}[/tex]
The compound cobalt(II)oxide is an ionic compound.
An ionic compound is a composed composed of a metal and a nonmetal. Hence the compound is actually an ion pair. The ion charges in the compound must be balanced.The compound cobalt(II)oxide is composed of a metal (cobalt) and a nonmetal (oxygen) hence the compound cobalt(II)oxide is an ionic compound.Hence, the fact that cobalt II oxide is comprised of a cation and an anion means that it us an ionic compound.
Learn more about ionic compound:https://brainly.com/question/9167977
Help with this question which I attached a picture of
[tex]\huge\underline\mathtt\colorbox{cyan}{A. Element L}[/tex]
Explanation:
Because the unidentified element has exactly the same Bright-Line Spectra of wavelength in nanometeres as does element L.
[tex]\huge\bold{\purple{\bold{⚡BeBrainly⚡}}} [/tex]
8 Fe + S8 → 8 FeS, how many moles of iron (Fe) are needed to react with 8.49 moles of sulfur (S8)?
Based on the balanced equation, the mole ratio of Iron to Sulphur is 8 to 1.
This means that for every mole of sulfur, 8 moles of iron is needed for the reaction.
∴ since the moles of Sulfur = 8.49 moles
⇒ moles of Iron = 8.49 moles × 8
= 67.92 moles
How might a molecule have a very strong molecular dipole?
Answer:
When you make the electronegativities of A(Positive partial charge) and C (Negative Partial charge) less and have B with a strong electronegativity to create a very strong molecular dipole. ... Both molecules possess strong molecular dipoles.
density is 6g/mL and volume is 40 mL what is the mass
Answer:
240g
Explanation:
Using the equation m=pV, where m=mass, p=density, and V=Volume
m=(6)(40)=240
m=240
how long does it take to rehydrate after being dehydrated
Answer:
up to 120 minutes to digest water and rehydrate your body
Don't really understand the question
Answer:
Did they mean those diagrams are the salt or what?
Calculate the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy.
Q = mcΔT
The specific heat of water is 4.18 J/g°C.
Taking into account the definition of calorimetry, the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy is 86.12 C.
In first place, calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is the amount of heat that a body can receive or give up without affecting its molecular structure. If the molecular structure does not change, the state (solid, liquid, gaseous) does not change. Since the molecular structure does not change, a change in temperature is observed.
In other words, sensible heat is the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case, you know:
Q= 1800 J c= 4.18 [tex]\frac{J}{gC}[/tex] m= 5 g ΔT= ?Replacing in the expression to calculate heat exchanges:
1800 J= 4.18[tex]\frac{J}{gC}[/tex]× 5 g× ΔT
Solving:
1800 J ÷ (4.18[tex]\frac{J}{gC}[/tex]× 5 g)= ΔT
ΔT= 86.12 C
In summary, the change in temperature of a 5.0 g sample of water that loses 1800J of heat energy is 86.12 C.
Learn more:
brainly.com/question/11586486?referrer=searchResults brainly.com/question/24724338?referrer=searchResultsLook at the Recording station detector on the upper left side of the Gizmo. What happens when the seismic waves hit the recording station?
Answer:
I don’t know what recording station you’re referring to but, When seismic waves reach the seismograph, a graphical record, or seismogram, is produced
Explanation:
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
The seismic wave has been the radiation, with the result of the movement of the earth surface. The movement has been result in the earthquake.
The intensity of the earthquake has been measured by seismograph on the Richter scale. The seismic wave results in the movement of the leads to the production of the seismograph.
The seismic waves hitting the recording station has been resulted in the seismograph, that has been evident of the earthquake.
For more information about earthquake, refer to the link:
https://brainly.com/question/1296104
How many formula units are in 0.0022 mol of NaCl (it’s urgent plz)
Answer:
1.204 × 10²¹ unitsExplanation:
The number of formula units can be found by using the formula
N = n × L
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 0.002 × 6.02 × 10²³
We have the final answer as
1.204 × 10²¹ unitsHope this helps you
