Answer:
I'll let you make an educated guess off of this info! You always retain info better making an inference on a subject that you are having trouble with!
Explanation:
There are four types of wireless networks -- wireless local area networks, wireless metropolitan area networks, wireless personal area networks and wireless wide area networks -- each with its own function.
wireless local area networkA wireless local area network (WLAN) is a wireless distribution method for two or more devices. WLANs use high-frequency radio waves and often include an access point to the Internet. A WLAN allows users to move around the coverage area, often a home or small office, while maintaining a network connection.
wireless metropolitan area networkA metropolitan area network (MAN) is a computer network that connects computers within a metropolitan area, which could be a single large city, multiple cities and towns, or any given large area with multiple buildings. A MAN is larger than a local area network (LAN) but smaller than a wide area network (WAN).
wireless personal area networkA PAN provides data transmission among devices such as computers, smartphones, tablets and personal digital assistants. PANs can be used for communication among the personal devices themselves, or for connecting to a higher level network and the Internet where one master device takes up the role as gateway.
wireless wide area networkWireless wide area network (WWAN), is a form of wireless network. ... WWAN connectivity allows a user with a laptop and a WWAN card to surf the web, check email, or connect to a virtual private network (VPN) from anywhere within the regional boundaries of cellular service.
I hope this helped!!
shania
The network type Genevieve uses is a wireless local area network.
What is a wireless local area network?
A wireless local area network (WLAN) exists as a wireless distribution procedure for two or more devices. WLANs utilize high-frequency radio waves and often contain an access issue to the Internet. A WLAN permits users to move around the coverage area, often a house or small office, while preserving a network connection.
Therefore, the correct answer is option (a) LAN.
Complete questions:
Genevieve is a student who attends classes at a campus downtown. She likes to study in the college's coffee shop, where she often accesses the Internet through the college's wireless network. Which network type is Genevieve using
(a) LAN
(b) MAN
(c) PAN
(d) WAN
To learn more about wireless local area networks refer to:
https://brainly.com/question/8985345
#SPJ2
Given the following array definition, write a constant declaration named ArraySize that automatically calculates the size in bytes, of the array:
newArray DWORD 10,20,30,40,50
a) arraysize=(S-newArray)
b) arraysize#(S-new,Array)/2
c) arraySize- (S-newArray)/4
d) arraySize- (S-arraySize)
Answer:
ArraySize = ($ - newArray)
Explanation:
Given
Array name: newArray
Type: DWORD
Required
The size of the array in bytes
The following formula is used to calculate the size of an array in assembly language.
Variable = ($-Array name)
So, we have:
ArraySize = ($ - newArray)
Where ArraySize is the variable that holds the size of newArray (in bytes)
An engineer is configuring AMP for endpoints and wants to block certain files from executing. Which outbreak control method is used to accomplish this task
Question Completion with Options:
A. device flow correlation
B. simple detections
C. application blocking list
D. advanced custom detections
Answer:
The outbreak control method that is used to accomplish the task of configuring AMP for endpoints and to block certain files from executing is:
C. application blocking list
Explanation:
The application blocking list creates a list of application files, which the AMP continuously tracks and analyzes to compare the file activities with previous cyber attacks. Specifically, the AMP for Endpoints is a cloud-managed endpoint security solution, which provides a retrospective alert to prevent cyber-security threats, and rapidly detects, contains, and remediates malicious files on the endpoints.
continuously tracks and analyzes files and file activities across your systems, and compares these events to what preceded or happened in past attacks. If a file exhibits malicious behavior, the AMP provides you with a retrospective alert which enables you to stop a potential threat from succeeding.
Write an algorithm for a vending machine that sells just one product. The machine flashes a yellow light when the quantity inside is below 40% of capacity
Answer:
The algorithm is as follows:
1. Start
2. Capacity = 100%
3. Input Status (True/False)
4. While Status == True
4.1. Read Quantity (%)
4.2. Capacity = Capacity - Quantity
4.3. If Capacity < 40%
4.3.1 Display Yellow Flash
4.4. Input Status (True/False)
5. Stop
Explanation:
This starts the algorithm
1. Start
The capacity of the machine is initialized to 100%
2. Capacity = 100%
This gets the status of the sales
3. Input Status (True/False)
The following iteration is repeated until the status is false
4. While Status == True
Read current sales quantity from the user
4.1. Read Quantity (%)
Remove the quantity from the capacity
4.2. Capacity = Capacity - Quantity
Check is capacity is below 40%
4.3. If Capacity < 40%
If yes, display yellow flashes
4.3.1 Display Yellow Flash
This gets the status of the sales
4.4. Input Status (True/False)
End algorithm
5. Stop
how to not addUse methods to: 1. Get a String from the user at the command line 2. Populate an ArrayList of Character data (the wrapper class), with each char in the String represented as a separate Character element in the ArrayList 3. Output each Character to the command line, each on a separate line space into my array list
Answer:
Explanation:
The following code is written in Java. It asks the user to enter a string. Then the program loops through the string and separates the string into an ArrayList of characters. Finally, it outputs each character separately on a its own line.
import java.util.ArrayList;
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("Enter a String: ");
String answer = in.nextLine();
ArrayList<Character> charsList = new ArrayList<>();
for (int i = 0; i < answer.length(); i++) {
charsList.add(answer.charAt(i));
}
for (char x: charsList) {
System.out.println(x);
}
}
}
The term __________ denotes data that is being stored on devices like a universal serial bus (USB) thumb drive, laptop, server, DVD, CD, or server. The term __________ denotes data that exists in a mobile state on the network, such as data on the Internet, wireless networks, or a private network. A. data in transit, data on record B. data at rest, data in transit C. data in transit, data at rest D. data on record, data in motion
Answer:
B. data at rest, data in transit
Explanation:
A database management system (DBMS) can be defined as a collection of software applications that typically enables computer users to effectively and efficiently create, store, modify, retrieve, centralize and manage data or informations in a database. Thus, it allows computer users to efficiently retrieve and manage their data with an appropriate level of security.
Generally, a database management system (DBMS) acts as an intermediary between the physical data files stored on a computer system and any software application or program.
Data at rest refers to a form of data that is stored on devices such as; a universal serial bus (USB) thumb drive, laptop, server, DVD, CD, or server.
Data in transit is simply any data that exists in a mobile or dynamic state on the network, such as data on the Internet, wireless networks, or a private network.
What Internet access method would be suitable for a business requiring a high bandwidth connection where no cabled options exist?
Answer:
Fiber Optic, it allows for speeds up to 1200 mbps
Explanation:
Identify the statement about Windows tasks that is FALSE.
To launch an application, click the Windows icon, select "All Programs," and then click an application.
The boot process is the process for powering off a computer.
A common way to shut down the computer’s operating system is by using the Start menu.
Users log into their accounts on the Welcome screen, before Windows is ready to use.
The statement about Windows tasks that is FALSE is
The boot process is the process for powering off a computer.According to the question, we are to discuss about Windows tasks and how it works as regards to the computer.
As a result of this we can see that in launching an application;
we need to click on Windows iconselect "All Programs," click an application.Therefore, The boot process is not the process for powering off a computer.
Learn more about Windows tasks .
https://brainly.com/question/1594289
The statement that is false is: The boot process is the process for powering off a computer, which is the second option. The boot process is actually the process of starting or powering on a computer, not powering it off.
The boot process refers to the sequence of events that occur when a computer is powered on or restarted. It is the process of starting up the computer's hardware and loading the operating system into memory so that it is ready for use. During the boot process, the computer's firmware (such as the BIOS or UEFI) performs a series of checks and tests to ensure that the hardware components are functioning correctly. It then searches for the operating system on connected storage devices, such as the hard drive or solid-state drive, and loads it into memory.
Learn more about the boot process here.
https://brainly.com/question/24355262
#SPJ6
Output is the act of is the act of entering the data to the computer?
Answer:
Output is the act of the computer display information based on your input
Explanation:
Funny thing is that output is the exact opposite of what you just described
You have two microservices that need to communicate with each other without holding up a thread on either end. One service will receive an ID and return a message once the job is complete.
Which communication framework should be used?
A.) Have a shared database that allows both
applications to read and write to the tables to share the data instead of having to communicate
B.) Use asynchronous messaging to send and receive messages between each microservice
C.) Abandon the microservice architecture so no interaction is needed
D.) Create a third service to handle the interaction between the services
E.) Use a RESTful architecture for both, send the ID through a POST, and ping the service with a GET until a response is available
Answer: E. Use a RESTful architecture for both, send the ID through a POST, and ping the service with a GET until a response is available.
Explanation:
Since there are two microservices that need to communicate with each other without holding up a thread on either end, the communication framework should be used is a RESTful architecture for both, send the ID through a POST, and ping the service with a GET until a response is available.
REST is a software architectural style which is used in defining the set of rules that be used for the creation of web services. The REST architecture allows requesting systems to be able to access and manipulate web resources.
At the Greene City Interiors branch office, you have been asked to implement an IP network. Your network ID is currently192.168.1.0/24. You need to divide this in half network (two subnets) to accommodate hosts on two separate floors of the building, each of which is served by managed switches. The whole network is served by a single router.
Based on the above scenario, answer the following questions:
1. To divide the network in half, what subnet mask do you need to use?
2. What are the subnet IDs for each network?
3. Your manager is not satisfied with the new subnet scheme and wants to reduce the number of subnets to make more hosts and addresses available in each subnet. Is there a way to use the same subnet for the two floors of the office?
Answer:
3 is your correct answer
A technique that uses data that is labeled to train or teach a machine.
Reinforcement
Unsupervised
Supervised
Answer:
computer.
Explanation:
it uses data that is labeled to train.
__________ makes the hardware usable, while __________ commands it to perform specific tasks. a.) The operating system, RAM b.) The CPU, RAM c.) The application software, the hard disk d.) The operating system, the application software
Answer:
a then c
Explanation:
Without an operating system you just have a pile of metal, and the program contains code, which is just a series of commands
Answer:
d.) The operating system, the application software
Suppose you and four of your friends are wirelessly connected with the home wireless router. [03] At this moment router is not transmitting data to the outgoing link and all of you want to browse internet and send packets of same size to the router. Consider the bandwidth of the outgoing link is20Mbps , packet size is 2500 bytes and the processing delay of each packet is
2μs . If your packet is queued at position eleven, calculate the delay after which your packet will be transmitted
format please? i cant understand
https://ref.surveyj.co/Oware111
What is the link?
IS IT A HACKING LINK
A network administrator needs 10 prevent users from accessing the accounting department records. All users are connected to the same Layer 2 device and access the internal through the same router. Which of the following should be Implemented to segment me accounting department from the rest of the users?
a. Implement VLANs and an ACL.
b. Install a firewall and create a DMZ.
c. Create a site-to-site VPN.
d. Enable MAC address filtering.
Answer:
C
Explanation:
7. System software is the set of software programs that helps run the computer and coordinates instructions between application software and hardware devices. It consists of the operating system (OS) and utility programs. How does the mindset of the designer affect the design of the operating system (e.g., Windows vs. Linux)
Answer:
Explanation:
The main goal when designing an operating system (OS) is to make sure that the system is as efficient and intuitive as possible. This is the mindset that designers have when creating the operating system. However, this also creates drastically different designs between designers, mainly because one design structure will feel much more natural and intuitive to one designer but not another. Since the designer's own personal taste/mindset drastically affects the design, most companies find their target audience and survey/test various designs. This is done in order to find what features and styles best fit the vast majority of the people.
Irene llegó tarde al colegio_______________
ayúdenme
^_^^_^^_^^_^^_^^_^^_^^_^^_^
Answer:
Explanation:
Absconding
Which statement is accurate to describe a spreadsheet versus an Excel workbook?
a) worksheets have one or more workbooks.
b) workbooks have one or more worksheets.
c) workbooks are the same as word documents.
d) worksheets always refer to real paper.
Consider an Erlang loss system. The average processing time is 3 minutes. The average inter-arrival time is 3 minutes. The number of servers is 3. What is r (sometimes referred to as the offered load)
Answer:
r = 1
Explanation:
Average processing time ( p ) = 3 minutes
Average inter-arrival time ( a ) = 3 minutes
number of servers ( m ) = 3
Determine the value of r
r ( offered load ) = p/a
= 3 / 3 = 1
∴ value of r ( offered load ) = 1
If every company is now a technology company, then what does this mean for every student attending a business college
Answer:
Explanation:
There are all sorts of possibilities for, say, inserting new technologies into existing processes. But most of these improvements are incremental. They are worth doing; in fact, they may be necessary for survival. No self-respecting airline, for instance, could do without an application that lets you download your boarding pass to your mobile telephone. It saves paper, can't get lost and customers want it.
But while it's essential to offer applications like the electronic boarding pass, those will not distinguish a company. Electronic boarding passes have already been replicated by nearly every airline. In fact, we've already forgotten who was first.
A security analyst recommends implementing SSL for an existing web service. A technician installs the SSL certificate and successfully tests the connection on the server. Soon after, the help desk begins receiving calls from users who are unable to log in. After further investigation, it becomes clear that no users have successfully connected to the web server since the certificate installation. Which of the following is MOST likely the issue?
A. DA Incorrect firewall rules are blocking HTTPS traffic.
B. Users are still accessing the IP address and not the HTTPS address.
C. DC Workstations need an updated trusted sites list.
D Users are not using tokens to log on.
Give three reasons to use a hard drive as mass storage.
Answer:
With that in mind, let's take a look at five places where hard drives shine.
Backups and Archives. ...
Media Libraries. ...
Large Capacity Storage. ...
NAS Drives and Security. ...
RAID Arrays. ...
Other Uses.
Can someone compress this ipv6 address? 558c:0000:0000:d367:7c8e:1216:0000:66be
558c::d367:7c8e:1216:0:66be
In the right situations, the use of multi-threads can allow for application speedup. Provide a small code example that illustrates how threads can be used to arrive at an appropriate result. Identify if there is a point where too many threads might impact performance of the application. g
Answer:
Explanation:
Threads allow an applications to run faster because they allow various tasks to run at the same time instead of doing one at a time and having to wait for one to finish before starting the next task. However, if too many threads are running at the same time, or a thread has a very large task or requires another task to finish before finishing its own then this can drastically impact performance. Mainly because too many resources are being used at a single moment. The following code is a small example of how threads work in Python.
import threading
import time
def thread_function(name):
print("Thread {name}: starting")
time.sleep(2)
print("Thread {name}: finishing")
thread1 = threading.Thread(target=thread_function, args=(1,))
thread1.start()
time.sleep(1)
thread2 = threading.Thread(target=thread_function, args=(2,))
thread2.start()
thread2.join()
what is the python ?
Answer:
Python is an interpreted high-level general-purpose programming language. Python's design philosophy emphasizes code readability with its notable use of significant indentation.
This is my Opinion.
Python is an interpreted high-level general-purpose programming language. Python's design philosophy emphasizes code readability with its notable use of significant indentation.
Hope this helps you :)
31. Explain what the program does. Write out the output 20 PRINT "Hellooo00000000000, world!" 30 PRINT "I'm learning about commands in BASIC." 40 PRINT 'This text is being printed via the PRINT commarrd. 2 209
o_num = input ("Please enter the amount of \"o\": ")
zero_num = input ("Please enter the amount of zeros: ")
i = 0
while i < o_num and i < zero_num:
repeat_o = "Hell" + o_num
repeat_zero = repeat_o + zero_num
i+=1
print (repeat_zero)
Write a recursive function named is_decreasing that takes as its parameter a list of numbers. It should return True if the elements of the list are strictly decreasing (each element in the array is strictly less than the previous one), but return False otherwise.
Answer:
c
Explanation:
11111 Power 2 sovle
AWS's EC2 is primarily considered which type? OA OB. Maas O Claas O D. None of the above O E. Serverless
Answer:
IaaS (Infrastructure as a Service)
"Amazon takes the responsibility of networking, storage, server and virtualization and the user is responsible for managing the Operating System, middleware, runtime, data and application."
Consider the following JavaScript code fragment:var greeting = function ( name ) {console.log ( name )}The best answer for what is wrong with this code is:Group of answer choices
Answer:
name is a reserved word in JS and cannot be used as an identifier
Explanation:
From the group of answer choices provided the only one that may be a problem would be using the word name as a parameter. Although name is not a reserved word per say in JS it is in HTML, and since JS targets HTML it could cause some errors. This however does not prevent this code from running correctly. JS does not require semicolons anymore, and the opening and closing braces for a body of code does not need to be on their own lines. Also, variable names are not Strings and do not need to be inside quotes, even for console.log()
