Answer:
reaches a higher temperature is LEAD.
Explanation:
In this exercise we have a calorimeter problem, in which the initial energy is absorbed by each body
E₀ = m c_e ΔT
where E₀ = 5000 J
ΔT = [tex]\frac{E_o}{m \ c_e}[/tex]
the specific heats for each material are tabulated
material c_e (J / kg ºC)
glass 837
copper 387
lead 128
gold 129
As they indicate that the mass of the materials is the same, the one with the greatest temperature difference is the one with the least specific heat, consequently the one that reaches a higher temperature is LEAD.
let's calculate for a mass of 1 kg
glass
ΔT = 5000/(1 837)
ΔT = 6ºC
Lead
ΔT = 5000/(1 128)
ΔT = 39.1º
GOLD
ΔT = 5000/(1 129)
ΔT = 38.8º C
PLEASE HELP ME!
1. Figure 5.20 shows a graph of displacement against time for a wave.
(a) What is meant by amplitude?
(b) Determine the period of oscillation, T. Then, calculate the frequency of oscillation.
2. Compare and contrast progressive wave and stationary wave.
Answer:
a) A = 3 cm, b) T = 0.4 s, f = 2.5 Hz,
2) A standing wave the displacement of the wave is canceled and only one oscillation remains
Explanation:
a) in an oscillatory movement the amplitude is the highest value of the signal in this case
A = 3 cm
b) the period of oscillation is the time it takes for the wave to repeat itself in this case
T = 0.4 s
the period is the inverse of the frequency
f = 1 /T
f = 1 /, 0.4
f = 2.5 Hz
2) a traveling wave is a wave for which as time increases the displacement increases, in the case of a transverse wave the oscillation is perpendicular to the displacement and in the case of a longitudinal wave the oscillation is in the same direction of the displacement.
A standing wave occurs when a traveling wave bounces off some object and there are two waves, one that travels in one direction and the other that travels in the opposite direction. In this case, the displacement of the wave is canceled and only one oscillation remains.
calculate the density of a solid of mass 20kg if it occupies a volume of 4m³
Answer:
Density=Mass/Volume
=20/4 kg/m^3
=5 kg/m^3
What is gravitational force??
Answer:
the force of attraction between all masses in the universe
Explanation:
Have a nice day :)
what simple machine is a Window Screen
AnswER PIZZA?
Explanation:
Un móvil viaja inicialmente con una velocidad de 55 m/s, al cabo de cierto tiempo, su velocidad es de 115 m/s, de repente frena bruscamente con una desaceleración de 14, 500 m/s2. ¿qué distancia recorrerá antes de frenar?
Answer:
Distancia, S = 2.84 metros
Explanation:
Dados los siguientes datos;
Velocidad inicial = 55 m/s
Velocidad final = 115 m/s
Deceleración = 14500 m/s²
Para encontrar qué tan lejos viajaría el automóvil, usaríamos la tercera ecuación de movimiento;
V² = U² + 2aS
115² = 55² + 2*14500*S
13225 = 3025 + 29000S
29000S = 13225 - 3025
29000S = 10200
S = 29000/10200
Distancia, S = 2.84 metros
A car has a mass of 550 kg. What is the weight of the car?
A. 6335 N
B. 7250 N
C. 550 N
D. 5390 N
Answer:
The answer is D. 5390
Explanation:
A kilogram to newton unit is 1 kg to 9.80665 newtons
If you do 550 times 9.80665 you get roughly 5393.6575 which is the closest to 5390
desde lo alto de una antena de telefono se lanza una peloota de tenis, la antena mide 150 metros. se mide el alcance horizontal y cae a unos 70 metros de su base. Calcular: a)La velocidad horizontal inicial con a que fue lanzada la pelota. b) La velocidad vertical con la cual llega la pelota al piso
Explanation:
las respuestas están en la foto de arriba
:3333333333333333333333
Answer:
Cannot see all the answer choices but, when pressure goes up, volume goes down. So your best bet is to choose the graph that has a downward slant.
Explanation:
50 points question (Who is known as father of science)Albert Einstein
Answer:
Albert Einstein is known as the father of science.
Una persona A tiene cierta cantidad de masa y una persona B tiene la mitad de masa de la persona A ¿como es el peso de B respecto al de A?
Answer:
El peso de la persona B es la mitad del peso de la persona A.
Explanation:
El peso de la persona B puede calcularse con la siguiente ecuación:
[tex] P_{B} = m_{B}g [/tex] (1)
En donde:
[tex]m_{B}[/tex]: es la masa de la persona B
g: es la gravedad
Dado que la persona B tiene la mitad de la masa de la persona A, tenemos:
[tex] m_{B} = \frac{m_{A}}{2} [/tex] (2)
En donde:
[tex]m_{A}[/tex]: es la masa de la persona A
Al introducir la ecuación (2) en (1) nos queda:
[tex] P_{B} = \frac{m_{A}}{2}g [/tex] (3)
Sabemos que el peso de la persona A está dado por:
[tex] P_{A} = m_{A}g [/tex] (4)
Entonces, al introducir la ecuación (4) en (3) tenemos:
[tex] P_{B} = \frac{P_{A}}{2} [/tex]
Por lo tanto, el peso de la persona B es la mitad del peso de la persona A.
Espero que te sea de utilidad!
in The unit of power is a
derived unite
The unit of power is
a derived unit be con
CAY
Answer:
Watts
Explanation:
The SI unit for power is the watt (W), where 1 watt equals 1 joule/second (1 W=1 J/s).
Can someone help me with this one :") thanks
explain the derivation of Newton's third and second law.
Answer:
Consider an isolated system of 2 bodies A & B. An isolated system means where there is no external force acting.Now let F be the force acting on B by A & F be the force acting on A by B.Now rate of change of momentum of A =dpA/dt and rate of change of momentum of B =d pB/dt
thus FAB=d pB/dt (i)......
FBA=dpA/dt (ii)........
Adding 1 and 2 we get FAB+FBA=d pB/dt+dpA/dt =d(pB+pA)/dt
But if no force is applied momentum will also be 0 because no velocity will be there so rate of change of momentum will also be 0
thus d(pA+pB)/dt=0
therefore FAB+FBA=0
or,FAB=-FBA
(3RD LAW OF MOTION)
What is cerebellum ?
Con respecto a las magnitudes longitud del péndulo y periodo, ¿por qué la línea de mejor ajuste de los puntos-dato de la distribución indica que sí hay relación entre ambas magnitudes?
Answer:
Por que existe una relación entre dichas magnitudes.
Para un pendulo perfecto de largo L, sabemos que el periodo esta definido como:
[tex]T = 2*\pi *\sqrt{L/g}[/tex]
Donde:
pi = 3.14
L = largo del péndulo
g = aceleración gravitatoria = 9.8 m/s^2
Entonces podemos ver que el periodo es proporcional a la raíz cuadrada de la longitud del péndulo.
Esto es por lo que al analizar datos de un experimento se debería observar una relación entre esas magnitudes.
Why is an organism that reproduces asexually genetically identical to its parent?
A.All of the offspring’s genes mutated to look like the parent’s genes.
B.The offspring inherited only half of the parent’s genes.
C.All of the offspring’s genes came from the parent.
D.The offspring inherited only the parent’s dominant genetic engineering
Which best explains why a firework being ignited is an example of an exothermic reaction and not an endothermic reaction?
Answer:
The fireworks give off heat.
Explanation:
Why is SI UNIT called decimal system?
Answer:
The metric system is a called a decimal-based system because it is based on multiples of ten. Any measurement given in one metric unit (e.g., kilogram) can be converted to another metric unit (e.g., gram) simply by moving the decimal place.
Explanation:
Hope it helps
Si se tiene un gato hidráulico y se aplica una fuerza en el Area 1, se refleja otra fuerza en el Area 2, teniendo en cuenta la siguiente condición A1 < A2. Podemos afirmar que las fuerzas son:
Answer:
the forces are proportional to their areas of application
Explanation:
In a hydraulic jack, Pascal's principle is used, that the pressure in an incompressible liquid is the same at the same height, whereby the pressure on both sides of the jack are the same
P₁ = P₂
the pressure is defined by
P = F / A
we substitute
[tex]\frac{F_1}{A_1} = \frac{F_2}{A_2}[/tex]
F₂ = [tex]\frac{A_2}{A_1} \ F_1[/tex]
therefore the force is F₂> F₁
Therefore the forces are proportional to their areas of application
when a wooden block floats in water displaces 0.006 cubic of the water find the weight of the wooden block when it is in air
Answer:
solve it with the formula 1−0.4=0.6, 0.6Vρg=Vρbg where ρb
Explanation:
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.Thus, the fraction of immersed volume remains the same.
The buoyant force acting on an immersed body is equal to the weight of the fluid displaced by it, if the fluid is in rest. In this case, the fluid is accelerating upwards so the buoyant force must also provide the displaced fluid force to accelerate. Therefore, buoyant force will be fVρgeff where V = volume of body and f = fraction of volume of body immersed in fluid and geff=g+a=1.5g.When fluid is at rest: f=⇒ρb=0.6ρ.In the second case: 1.5fVρg=Vρbg+Vρba=1.5Vρbg⇒fρ=ρb⇒f=0.6.Thus, the fraction of immersed volume remains the same.Body will float with 40% of the volume above water surface.
Brian has an object suspended in the air. It has a mass of 100 kg and is 25 meters above the ground. What is the object’s potential energy?
Explanation:
the PE = Weight x g x Height above ground where g is the gravitational constant (9.8m/s^2)
so tge PE = 100 x 9.8 x 25 = 24500 J
Witch action is designed to increase the safety of a person carrying a microscope from one place to another
Answer: Microscope is an instrument that is used for observing micro particles, cells, and nanosized particles.
Explanation:
Placing one hand below the stage of the microscope and other hand must be used to hold the arm of the microscope. This facilitates the safety of the microscope as it will provide support to the entire structure of the microscope and also to the lens and mirrors attached to the structure of the microscope. If any of the part get damaged or lost during carrying it will affect the overall functioning of the microscope.
Answer:
wrapping the electrical cord around the arm of the microscope
Explanation:
just took the test
Suggest two ways in which the boy could balance the beam?
Answer:
Hope this is what you were looking for!
Explanation:
1) So, if we are talking about balancing a straight stick (beam), he could put a finger from each hand on either side of it and move them together. As a result of friction his fingers will meet at the balance point.
2) Method of trial and error.
calculate the density of a pure substance if 100cm cubed of it has a mass of 20 grams
Answer:
5
Explanation:
20 x 5 = 100
please help with my finals
the answer is the speed of blue ball after collision is 2.6v
can i have the physical science grade 12 june 2021 paper (common paper)
Answer:
u have to purchase it via online e-commerce platforms
Answer:
what your crazy anong pong common paper
Un automóvil se anuncia con una potencia de 600 hp y cuando se prueba en una subida pesada, alcanza una velocidad máxima de 45 km/h ¿cuál es la fuerza máxima que le imprime el motor?
Answer:
The force is 35808 N.
Explanation:
Power, P = 600 hp = 600 x 746 W = 447600 W
speed, v = 45 km/h = 12.5 m/s
Let the force is F.
P = F v
447600 = F x 12.5
F = 35808 N
3. How does the centripetal force change when
the rubber stopper makes a circular motion
with a smaller radius?
Answer:
The centripetal force increases.
Explanation:
Centripetal force is given by [tex]F_c=ma_c[/tex]; where [tex]a_c=\frac{v^2}{r}[/tex].
Given these two equations, we can rewrite the formula for centripetal force as:
[tex]F_c=m\frac{v^2}{r}[/tex]
As shown, radius is in the denominator, thus, a smaller radius would lead to a larger centripetal force.
(2²)⁴pepelelellelrle
hiytreawretyuiouytrdsedrtyuiougfdgiojgfchjkljhjkl;kjhbjkljhbnjknjbnjknbvnm,nbm,nmjj
Answer:
Stimulants are a group of drugs that result in increased activity in the body. Sometimes referred to as “uppers,” these drugs are frequently abused due to their performance-enhancing and euphoric effects. Generally, those who abuse stimulants experience heightened energy levels and enhanced focus.
Stimulants speed up mental and physical processes, which can produce desirable effects in the short-term by increasing levels of dopamine in the brain. While users may feel great due to the short-term effects of stimulants, long-term abuse of these drugs can have significant consequences, which is why it is so important for those who abuse the drugs to get help as quickly as possible.
Explanation:
hope this works
