Four friends all give each other presents.
The total cost of the presents is £80.52
Work out the mean cost of a present in pounds (£).

As a result, the percentage of adults who selected math is different from the percentage of kids who did.

As a number out of 100, a percentage is a method to express a proportion or a fraction. It is symbolized by the number %. If there are 25 boys in a class of 100 pupils, for instance, then there are 25% of boys in the class. It is a helpful method to compare quantities and to express changes in values over time.

given

120 80

Total    200

Women Overall Party A Party B

70 60

Overall    130

Therefore, there are 130 ladies in the group.

b) The chart indicates that 70 women plan to support Party A.

Thus, the percentage of adults who selected English was 40% of 48, which is equal to 0.4 times 48 and 19.2 when rounded to the closest whole number.

b) Reeshma is not accurate. The percentage of adults who selected math is 35%, while for children it is 40%, according to the pie chart.

To know more about percentage visit:

https://brainly.com/question/28269290

#SPJ1

The complete question is:-   complete the two-way table, which shows the voting intentions of a group of men and women. a How many women are in the group?

Men

Party A Party B 120

Total    200

Women   130

Total       380

b How many women intend to vote for Party A?

2 A group of 48 adults are asked what their favourite subject was at school. They can choose from

maths, English and science.

A group of 32 school children are asked the

same question.

The total resistance of the circuit is  6 + 2i.

Resistance is a unit of measurement for the resistance to current flow in an electrical circuit. The Greek letter omega () represents the unit of measurement for resistance, which is ohms.

Georg Simon Ohm (1784–1854), a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance known as an ohm.

The amount of opposition any object applies to the flow of electric current is known as resistance. A resistor is an electrical component utilised in the circuit to provide that particular level of resistance. R = V I is a formula used to calculate an object's resistance.

given :

R1 =  (4 + 6i)

R2 = (2 - 4i)

total resistance of the circuit is

R = R1 + R2

= (4 + 6i) + (2 - 4i)

= 6 + 2i

To know more about resistance , click the below link

https://brainly.com/question/30799966

#SPJ4

The equation RT = + R1 = 4 + 6i ohms and R2 = 2 4i ohms, RT = 6 - 2i ohms, determines the circuit's total resistance.

R1 and R2 are added to determine RT: RT = R1 + R2.

The actual components added together give us 4 + 2 = 6.

When we add the fictitious parts, we obtain 6i - 4i = 2i.

RT is thus equal to 6 - 2i ohms.

To put it another way, the circuit's total resistance is a complex number containing a real component of 6 ohms and an imaginary component of -2 ohms. This shows the combined impact of the circuit's resistances R1 and R2. When a constant voltage differential of one volt (V) is supplied to two conductor points and a current of one ampere (A) results, the resistance between those points is measured in ohms. It is comparable to one volt for every ampere (V/A), to put it simply.

learn more about ohms here:

https://brainly.com/question/29750972

#SPJ4

In the equation A’ = 364V relating the surface area A and the volume V of a spherical balloon. We are also given that the volume is increasing at a rate of 18 cubic inches per second.so the rate at which the surface area of the balloon is increasing is 6552 square inches per second

We want to find the rate at which the surface area is increasing when A = 153.24 square inches and V = 178.37 cubic inches.

To find the rate of change of A with respect to time, we can use the chain rule of differentiation:

dA/dt = dA/dV × dV/dt

We know that dV/dt = 18 cubic inches per second, so we just need to find dA/dV and then we can find dA/dt.

To find dA/dV, we differentiate the equation A’ = 364V with respect to volume V:

dA/dV = 364

Now we can find dA/dt:

dA/dt = dA/dV × dV/dt ⇒ 364 × 18 ⇒ 6552 square inches per second

So the rate at which the surface area of the balloon is increasing is 6552 square inches per second when A = 153.24 square inches and V = 178.37 cubic inches.

To find the "surface area" of the sphere: https://brainly.com/question/1293273

#SPJ11

Based on the exponential decay equation, the number of employees for the company that has been decreasing yearly by 5%, will in 10 years be approximately 515.

The exponential decay equation or function gives the value in t years that has a constant ratio of decrease.

Exponential decay equation is one of the two exponential functions.  The other is the exponential growth equation.

The annual decrease in the number of employees = 5%

The current number of employees in the company = 860

The expected time = 10 years.

The exponential decay equation is as follows, y = 860 x 0.95^10.

y = 860 x 0.95^10 = 515

Learn more about exponential functions at https://brainly.com/question/30127596

#SPJ1

Answer:

The number x that is midway between x and 27, and has a midpoint of -3, is -33

midpoint = (x + 27) / 2

We also know that the midpoint is equal to -3, so we can set these two expressions equal to each other and solve for x:

-3 = (x + 27) / 2

Multiplying both sides by 2 gives:

-6 = x + 27

Subtracting 27 from both sides gives:

x = -33

Answer:

Step-by-step explanation:

In the given system of equations one taco costs $0.80 and one burrito costs $0.72.

An equation system is a finite collection of equations for which we searched for the common solutions. It is sometimes referred to as a set of simultaneous equations or an equation set. The classification of a system of equations is similar to that of a single equation. In modelling issues where the unknown values may be expressed in the form of variables, a system of equations finds use in everyday life.

Let us suppose the cost of one taco = x.

Let us suppose the cost of one burrito = y.

Then, for Emma we have:

3x + y = 3.65

For Cooper we have:

x + 2y = 3.30

Using elimination, multiply the first equation by 2 and subtract it from the second equation:

(2)(3x + y = 3.65)

6x + 2y = 7.30

x + 2y = 3.30

-5x = -4

x = 4/5

Substituting this value of x into either equation:

3(4/5) + y = 3.65

y = 2.15/3 ≈ 0.72

Therefore, one taco costs $0.80 and one burrito costs $0.72.

Learn more about system of equations here:

https://brainly.com/question/13760328

#SPJ1

If f(x,y) > 0 and is a continuous function defined over a rectangle R=[a,b]x[c,d], then the double integral over R of f(x,y) can be interpreted as the volume of a solid that lies in the first octant and under the graph of the function f(x,y) over the region R.

The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0, where f is a continuous function defined on a rectangle R = [a,b] × [c,d] is given as follows:

The double integral of f(x,y) over R, if f(x,y) > 0, gives the volume under the graph of the function f(x,y) over the region R in the first octant.

Consider a point P (x, y, z) on the graph of f(x, y) that is over the region R, and let us say that z = f(x,y). If f(x,y) > 0, then P is in the first octant (i.e. all its coordinates are positive).

As a result, the volume of the solid that lies under the graph of f(x,y) over the region R in the first octant can be found by integrating the function f(x,y) over the rectangle R in the xy-plane, which yields the double integral.

The following formula represents the double integral over R of f(x,y) if f(x,y) > 0:

∬Rf(x,y)dydx

The geometric interpretation of the double integral over R of f(x,y) if f(x,y) > 0 is given by the volume of the solid that lies under the graph of the function f(x,y) over the region R in the first octant.

To know more about the "continuous function": https://brainly.com/question/30089593

#SPJ11

It would cost €27 to buy a sheet of area 4 meters by 75 centimeters.

We solve this problem easily by employing the unitary method. To answer this question, we need to first calculate the area of the metal sheet being sold and the area of the metal sheet being purchased.

The area of the metal sheet being sold is:

5 meters × 2 meters = 10 square meters

The area of the metal sheet being purchased is:

4 meters × 0.75 meters = 3 square meters

Now we can calculate the price per square meter of the metal sheet being sold:

€90 ÷ 10 square meters = €9 per square meter

Finally, we can calculate the cost of the metal sheet being purchased:

3 square meters × €9 per square meter = €27. Therefore, the cost to buy a sheet of area 4 meters by 75 centimeters which costs €90 to a metal of area 5 meters by 2 meters would be €27.

Learn more about the unitary method on

https://brainly.com/question/14793162?referrer=searchResults

#SPJ4

Smallest number in the data set that is not an outlier is 15, Median of the first half is 17, Median of the entire data set is 20.5. Median of the second half is 22. Largest number in the data set that is not an outlier is 35.

Give a short note on Median?

In statistics, the median is a measure of central tendency that represents the middle value in a dataset. To find the median, the data must first be sorted in ascending or descending order. If the dataset contains an odd number of values, the median is the middle value. If the dataset contains an even number of values, the median is the average of the two middle values.

The median is a useful measure of central tendency in datasets that are skewed or have outliers, as it is less sensitive to extreme values than the mean. It is also useful in datasets with non-numeric values, such as rankings or survey responses.

To create a modified box plot, we need the following values:

The smallest number in the data set that is not an outlier: 15

The median of the first half of the data set: 17

The median of the entire data set: 20.5

The median of the second half of the data set: 22

The largest number in the data set that is not an outlier: 35

So the values needed to create a modified box plot for this data set are: 15, 17, 20.5, 22, 35.

The probability of selecting another black marble is 3/7. As a result, the probability of drawing two black marbles in a row without replacement

(a) P(two red marbles) with replacement:The probability of drawing a red marble from a jar with five red marbles and four black marbles is 5/9, as there are five red marbles and nine total marbles. As a result, the probability of selecting two red marbles in a row with replacement is:P(two red marbles with replacement) = (5/9) × (5/9) = 25/81without replacement:When the first marble is removed, there are now only eight marbles remaining in the jar. Because there are only four black marbles in the jar, the probability of drawing a red marble is now 5/8. Therefore, the probability of selecting two red marbles in a row without replacement is:P(two red marbles without replacement) = (5/9) × (5/8) = 25/72(b) P(two black marbles)with replacement:For the first draw, there are four black marbles in the jar and a total of nine marbles. Therefore, the probability of drawing a black marble on the first draw is 4/9. Since the first marble was not removed, there are now eight marbles in the jar, including three black ones, and there are a total of nine marbles. Therefore, the probability of selecting another black marble is 3/9 or 1/3.

The probability of drawing two black marbles in a row with replacement is:P(two black marbles with replacement) = (4/9) × (1/3) = 4/27without replacement:Since the first marble was removed, there are only eight marbles in the jar, and there are four black ones. Therefore, the probability of selecting a black marble is 4/8 or 1/2. When the first black marble is removed, there are only seven marbles left, including three black ones. Therefore, the probability of selecting another black marble is 3/7. As a result, the probability of drawing two black marbles in a row without replacement is:P(two black marbles without replacement) = (4/9) × (3/7) = 12/63(c) P(one red and one black marble)with replacement:When one red and one black marble are selected with replacement, there are nine marbles in the jar for each draw. The probability of selecting one red and one black marble in a row is:P(one red and one black marble with replacement) = 2 × (5/9) × (4/9) = 40/81without replacement:Since there are five red and four black marbles in the jar, the probability of selecting a red marble first is 5/9. Once the red marble has been drawn and removed, there are only eight marbles remaining, including four black ones. As a result, the probability of selecting a black marble is 4/8 or 1/2.

As a result, the probability of drawing one red and one black marble without replacement is:P(one red and one black marble without replacement) = (5/9) × (4/8) + (4/9) × (5/8) = 20/36 + 20/36 = 10/18 = 5/9(d) P(red on the first draw and black on the second draw)with replacement:There are nine marbles in the jar for each draw. The probability of selecting a red marble first is 5/9. When the red marble is returned to the jar, there are still nine marbles in the jar, but now there are only four black marbles. The probability of selecting a black marble on the second draw is 4/9. As a result, the probability of drawing a red marble first and a black marble second with replacement is:P(red on the first draw and black on the second draw with replacement) = (5/9) × (4/9) = 20/81without replacement:Since there are five red and four black marbles in the jar, the probability of selecting a red marble first is 5/9. Once the red marble has been drawn and removed, there are only eight marbles remaining, including four black ones. As a result, the probability of selecting a black marble is 4/8 or 1/2. As a result, the probability of drawing a red marble first and a black marble second without replacement is:P(red on the first draw and black on the second draw without replacement) = (5/9) × (4/8) = 5/18

Learn more about Selecting

brainly.com/question/30044882

#SPJ11

To create opposite x terms, we need to multiply the first equation by -5.

How to choose what term to multiply the first equation?

To choose what term to multiply the first equation, we need to consider the coefficients of the variable that we want to eliminate (in this case, the x variable) in both equations. Our goal is to create opposite terms for that variable in the two equations, so that when we add or subtract the equations, that variable will be eliminated.

Determining the number to multiply the first equation by to form opposite terms for the x-variable :

In this case, the coefficient of x in the first equation is 2/5, and the coefficient of x in the second equation is -2.

To create opposite terms for x, we need to find a constant that, when multiplied by the first equation, will result in a coefficient of x that is the negative of the coefficient of x in the second equation (i.e., -2).

To do this, we can divide the coefficient of x in the second equation by the coefficient of x in the first equation, and then multiply the entire first equation by the resulting constant.

In this case, we have:

[tex](-2)/(2/5) = -5[/tex]

Multiplying the first equation by -5 gives:

[tex]-5(2/5)x + (-5)6y = -5(-10)[/tex]

which simplifies to:

[tex]-2x - 30y = 50[/tex]

Now we have two equations with opposite x terms:

[tex]-2x - 4y = 40[/tex]

[tex]-2x - 30y = 50[/tex]

To know more about equations visit :

brainly.com/question/17149704

#SPJ1

A 2-liter container costs R0.032 per milliliter, which is less than a 750-milliliter bottle, which costs R0.037 per milliliter.

a volumetric measurement using the metric system. One litre is equivalent to 1,000 milliliters. Additionally known as cc, mL, and cubic centimetre.

To evaluate which option is the most cost-effective, we need to calculate the cost per milliliter of each bottle of cooking oil.

For the 750ml bottle, the cost per milliliter is:

R28 / 750ml = R0.037 per ml

For the 2-liter bottle, the cost per milliliter is:

R63 / 2000ml = R0.032 per ml

Therefore, the 2-liter bottle is the more cost-effective option, as it has a lower cost per milliliter than the 750ml bottle. The cost per milliliter of the 2-liter bottle is R0.032, which is cheaper than the cost per milliliter of the 750ml bottle, which is R0.037.

To know more about  Milliliter visit:

https://brainly.com/question/28920784

#SPJ1

Answer:

Solve the problems. a) The number a is 4/5 of the number b. What part of number a is number b?

Step-by-step explanation:

a) If a is 4/5 of b, then b is 5/4 of a.

To find what part of a is b, we divide b by a:

b/a = 5/4

This means that b is 5/4 times larger than a, or b is 125% of a.

To find what part of a is b, we subtract 1 from this fraction:

b/a - 1 = 5/4 - 1

b/a - 1 = 1/4

So, b is 1/4 of a, or b is 25% of a.

Answer:

576 books.

Step-by-step explanation:

134+254+188=576 books in total.

Answer:

576

Step-by-step explanation:

This is literally easy!

Checked books are 134 + 254 + 188 = 576

Answer:

Step-by-step explanation:

= 2(15+8)

=2(23)

=46

Each pair of children gets to bat for 7.5 minutes.

To find out how much time each pair gets to bat, we need to divide the total session time by the number of pairs of children who bat.

Number of pairs of children who bat = 6 groups x 1 pair/group = 6 pairs

Total time for the session = 45 minutes

Time per pair of children who bat = Total time / Number of pairs of children who bat

= 45 minutes / 6 pairs

= 7.5 minutes per pair

Therefore, each pair of children gets to bat for 7.5 minutes.

Learn more about divide here : brainly.com/question/27601809

#SPJ1

(a) Dataset with mean substantially less than median:

9, 10, 11, 12, 90

The mean of this dataset is (9+10+11+12+90)/5 = 26.4, while the median is 11, which is substantially greater than the mean. The last data value is 90, which is a positive integer less than 100.

(b) Dataset with mean substantially more than median:

98, 99, 100, 101, 200

The mean of this dataset is (98+99+100+101+200)/5 = 119.6, while the median is 100, which is substantially less than the mean. The last data value is 200, which is a positive integer less than 100.

(c) Dataset with mean equal to median:

2, 3, 4, 4, 5

The mean of this dataset is (2+3+4+4+5)/5 = 3.6, which is equal to the median (the middle value of the dataset). The last data value is 5, which is a positive integer less than 100.

For more questions like Dataset click the link below:

https://brainly.com/question/26468794

#SPJ11

The height of an open cylinder of radius of 8cm given that it has a curved surface area of 1000 cm² is equals to the 159.24 cm.

The area obtained after substracting the circular area from the total area of the cylinder is called as curved surface area. Curved surface area is calculated by formula, 2πrh

where r --> radius of cylinder

h --> height of cylinder

π --> math special constant

We have an open cylinder with the following dimensions,

Radius of cylinder, r = 8 cm

Curved surface area of cylinder, A = 1000 cm². We have to calculate the height of this open cylinder. Let the height of an open cylinder be 'h cm' . Using the above formula, height of cylinder, h = curved Area/ 2πr

=> h = A/2π

=> h = 1000/2 ( 3.14)

=> h = 1000/6.28

=> h = 159.24

Hence, required value of height is 159.24 cm.

For more information about curved surface area of cylinder, visit :

https://brainly.com/question/20560861

#SPJ4

Net rendering is a method of rendering a computer-generated animation or image on multiple computers over a network.

Net rendering is a method of rendering a computer-generated animation or image on multiple computers over a network. This technique allows a user to take advantage of the computing power of multiple computers to render a scene. To do this, the user would divide the scene into several parts, assigning each part to a different computer. The computers would then render each part of the scene independently, and then the results are combined into a single image. This process can significantly reduce the time required to render a scene, as the workload is distributed over multiple computers. For example, if it would normally take a single computer 10 minutes to render a scene, net rendering could reduce that time to 2 minutes.

Learn more about significantly here:

https://brainly.com/question/14789537

#SPJ1

Answer: 100:3

Step-by-step explanation:

Answer:

the ratio of first-year college basketball players to high school seniors playing basketball is 3:100.

Step-by-step explanation:

The problem states that for every 75,000 high school seniors playing basketball, about 2,250 play college basketball as first-year students. To write the ratio of first-year college basketball players to high school seniors playing basketball, we need to compare the two quantities.

The ratio is a way of expressing the relationship between two numbers as a fraction or a pair of numbers separated by a colon (:). In this case, we want to express the ratio of the number of first-year college basketball players to the number of high school seniors playing basketball.

To write the ratio, we start by putting the number of first-year college basketball players (2,250) in the numerator of a fraction. We put the number of high school seniors playing basketball (75,000) in the denominator of the same fraction.

So the ratio can be expressed as:

2,250/75,000

To simplify this fraction, we can divide both the numerator and denominator by a common factor. In this case, both 2,250 and 75,000 are divisible by 750. Dividing both numbers by 750 gives:

2,250/75,000 = 3/100

Step 1: x is a positive number, so the absolute value of x will be equal to x.

Step 2: The expression x+|x| simplifies to 2x

Step 3: Therefore, the expression x+|x| = 2x if x≥0

Answer:

[tex]5x {}^{3} - x + 5x + 2[/tex]

Step-by-step explanation:

Greetings!!!

So to find the sum of (f+g)(x) just simply add these two functions

Add like terms together

If you have any questions tag it on comments

Hope it helps!!!

The smallest value of `n` for which `S_n` has an element of order greater than or equal to 100 is 101.

To determine the smallest value of n for which S_n has an element of order greater than or equal to 100, we can use the formula

S_n = n!/r!(n - r)!,

where n is the number of elements in the set, and r is the number of elements being chosen at a time.

Given, S_n has an element of order greater than or equal to 100. The smallest value of n should be determined.

The formula for the number of permutations in a set with n elements is given by, `S_n = n!/r!(n - r)!`

where `n` is the number of elements in the set and `r` is the number of elements being chosen at a time.

The element of order `n` in `S_n` is an `n` cycle. For `n = 100`, we have an element of order 100.

This element can be expressed as `(1 2 3 ... 99 100)`. Thus, `r = 100`.

Substituting these values in the formula of S_n we get, S_n = n!/r!(n - r)! => n!/(100!(n - 100)!)

Now, we have to find the smallest value of n for which S_n has an element of order greater than or equal to 100. If we substitute `n = 100`, then we will have an element of order 100. But the question asks for the smallest value of n. So, if we substitute `n = 101`, we will have an element of order `101`. Hence, the smallest value of `n` for which `S_n` has an element of order greater than or equal to 100 is 101.

To know more about the smallest value: https://brainly.com/question/31133248

#SPJ11

The simplified form of the given expression as required to be determined in the task content is; 2x⁴√5.

It follows from the task content that the Simon form of the given expression √20x⁸ is required to be determined from the task content.

On this note, since the given expression is; √20x⁸.

We have that; = √ (4 × 5 × x⁸)

Therefore, since 4 and x⁸ are perfect squares; it follows that we have;

= 2x⁴ √5.

Ultimately, the simplified form of the given expression as required to be determined is; 2x⁴ √5.

Complete question; The correct expression is; √20x⁸.

Read more on perfect squares;

https://brainly.com/question/27307830

#SPJ1

The dimensions of the open rectangular box of maximum volume that can be made from a sheet of cardboard 19 in. by 11 in. by cutting congruent squares from the corners and folding up the sides are 6.33 in. x 3.33 in. x 5.33 in. The volume of the box is 113.78 in³.

The dimensions of the box can be found with the following steps:

First, determine the side length of the square that is to be removed from each corner of the cardboard box. Since this will be done uniformly on all four corners, let the side length be x. The dimensions of the cardboard box can then be written as:

Length = 19 in. - 2x

Breadth = 11 in. - 2x

Height = x

After folding the cardboard along the creases, the base of the rectangular box will be (19 - 2x) in. by (11 - 2x) in. with the height of the box being x in. The volume of the box can then be found by multiplying the base and height of the box, i.e.,

Volume = (19 - 2x) (11 - 2x) x

Let V(x) be the volume of the rectangular box in terms of x. Then:

V(x) = (19 - 2x) (11 - 2x) x

Simplifying,

V(x) = 4x³ - 60x² + 209x

The maximum value of V(x) can be found by differentiating V(x) with respect to x and equating the result to zero. Therefore,

V'(x) = 12x² - 120x + 209 = 0

Solving, V(x) has a maximum value when x = 19/3 - 2(2/3)√14 or x = 19/3 + 2(2/3)√14. The value x = 19/3 - 2(2/3)√14 is the maximum value because x must be less than 5.5, which is the minimum of 11/2 and 19/2 divided by 3, the upper bound for x. Therefore, the dimensions of the box are

Length = 19 - 2(19/3 - 2(2/3)√14) = 6.33 in.

Breadth = 11 - 2(19/3 - 2(2/3)√14) = 3.33 in.

Height = 19/3 - 2(2/3)√14 = 5.33 in.

Thus, the dimensions of the box are 6.33 in. x 3.33 in. x 5.33 in. The volume of the box is:

V = 6.33 x 3.33 x 5.33 = 113.78 in³.

Learn more about maximum volume here: https://brainly.com/question/10373132

#SPJ11

Answer:

Step-by-step explanation:

2/5-1 2/5

Answer:

CP of computer = 27000 rs.

Step-by-step explanation:

D% = Dis/MP*100

We know, Dis = MP-SP

Given Profit= 1160 rs.

So,CP = 27000 rs.

To understand why b = d = 0 if the function is even, we need to consider the definition of an even function.Therefore If P(x) is an even function, then b = d = 0.

A polynomial is a mathematical expression that consists of variables and coefficients, combined using the operations of addition, subtraction, and multiplication. It can have one or more terms and can be of any degree.

An even function is a function that satisfies the condition f(x) = f(-x) for all x in the domain of the function.

If P(x) is an even function, then we have P(x) = P(-x) for all x. Substituting -x for x in the expression for P(x), we get:

P(-x) = a(-x)⁴ + b(-x)³ + c(-x)² + d(-x) + e

= a(x⁴) - b(x³) + c(x²) - d(x) + e

Since P(x) = P(-x), we can equate the two expressions for P(x) and P(-x) to get:

a(x⁴) + b(x⁴) + c(x²) + d(x) + e = a(x⁴) - b(x³) + c(x²) - d(x) + e

Simplifying this equation, we get:

2b(x³) + 2d(x) = 0

Since this equation holds for all values of x, we can set x = 0 to get:

2d(0) = 0

which implies that d = 0. Similarly, setting x = 1, we get:

2b(1³) + 2d(1) = 0

2b = 0

b = 0

To know more about function visit:

https://brainly.com/question/29124137

#SPJ1