For SCl4, the electron domain geometry is _______(i)________ and the molecular geometry is ______(ii)________.

Answer:

The two main classes of molecules are polar molecules and nonpolar molecules. Some molecules are clearly polar or nonpolar, while others fall somewhere on the spectrum between two classes. Here's a look at what polar and nonpolar mean, how to predict whether a molecule will be one or the other, and examples of representative compounds.

Explanation:

so its c

An example of polar molecule is a molecule made of covalent bonds that has partial positive and partial negative charges in different areas of the atom.

Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.

Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.

Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.

Learn more about covalent bond,here:

https://brainly.com/question/19382448

#SPJ2

Answer: 33. Lattice

35. Covalent

38. Triple covalent bond

Answer:

Box#:

1:CoS

2:Co2S3

3:CoSO4

4:Co2(SO4)3

5:CoSO3

6:Co2(SO3)3

Explanation:

1:Co(II) is -2 and S is -2, so the charges cancel

2:Co(III) is -3 and is -2, so you cross the charges but do not reduce

3:Co(II) is -2 and SO4 is -2, so the charges cancel

4:Co(III) is -3 and SO4 is -2 so the charges cross but do not reduce

5:Co(II) is -2 and SO3 is -2 so the charges cancel

6:Co(III) is -3 and SO3 is -2 so the charges once again cross

Answer:

Cobalt (II) sulfide → CoS

Cobalt (III) sulfide → Co₂S₃

Cobalt (II) sulfate → CoSO₄

Cobalt (III) sulfate → Co₂(SO₄)₃

Cobalt (II) sulfite → CoSO₃

Cobalt (III) sulfite → Co₂(SO₃)₃

Answer:

2

Explanation:

energy produced in nuclear fusion or even fission is due to mass defect and it can be calculated by Einstein equation e=mc2

The statement, that describes energy released by a nuclear fusion reaction is produced is "mass is converted to energy."

Nuclear fusion is the process by which two light atomic nuclei merge to produce a single heavier one, releasing huge quantities of energy in the process.

A fusion reaction occurs when two light nuclei combine to form a single heavy nucleus. Because the overall mass of the resulting single nucleus is smaller than the mass of the two initial nuclei, the process releases energy.

That is, nuclear energy refers to the energy released as a result of mass loss during the nuclear fusion processes. Both of these processes transform mass loss into energy in accordance with Einstein's mass-energy ratio, E = [tex]mc^{2}[/tex]. As a result of the fusion reaction, mass is destroyed and energy is released.

Hence, the correct answer is 2.

Learn more about nuclear fusion here

https://brainly.com/question/12701636

#SPJ2

Answer:

50g iron comprises 5.376 × 1023 atoms.

Explanation:

The volume of the dry nitrogen gas at STP is 57.4 mL

From the question given above, the following data were obtained:

Initial volume (V₁) = 77 mL

Initial temperature (T₁) = 50 °C = 50 + 273 = 323 K

Initial pressure (P₁) = 763 – 92.5 = 670.5 mmHg

Final temperature (T₂) = STP = 273 K

Final pressure (P₂) = 760 mmHg

The volume of the dry nitrogen can be obtained by using the combine gas equation as follow:

[tex] \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{670.5 \times 77}{323} = \frac{760 \times V_2}{273} \\ \\ cross \: multiply \\ \\ 323 \times 760 \times V_2 = 670.5 \times 77 \times 273 \\ \\ divide \: both \: side \: by \: 323 \times 760 \\ \\ V_2 = \: \frac{670.5 \times 77 \times 273 }{323 \times 760} \\ \\ V_2 = 57.4 \: ml[/tex]

Therefore, the volume of the dry nitrogen gas is 57.4 mL

Learn more: https://brainly.com/question/25080013

When energy is added to a system during phase change, the particles move faster.

When a substance is heated, the internal energy within a system associated with the motion of particles and that can be added to a substance is called thermal energy.

During a phase change, when more energy is added to the system, the particles within the system will have greater motion and the temperature will increase.

The attractions that hold molecules together are electrostatic forces. The correct statement about the attractions that hold particles is that attractions between particles break when  attractions due to Electrostatic forces when particles move fast enough these forces can no longer keep particles together.

Rubber band  is not a perfect comprehension for Bonds in a substance when considering phases change because for a phase change from liquid to gas the bonds do not break completely the particles can still slide past each other.

The pair of samples that will have the same average kinetic energy of benzene molecules is a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C.

Learn more: https://brainly.com/question/671212

Answer:

CaCO3 yields CaO + CO2

Exclamation

Since the Decomposition state of a redox involves a broken down compound, this equation proves that this is a DECOMPOSITION since it is being broken down.

Answer:

pH = 3.3

Explanation:

Buffer solutions minimize changes in pH when quantities of acid or base are added into the mix. The typical buffer composition is a weak electrolyte (wk acid or weak base) plus the salt of the weak electrolyte. On addition of acid or base to the buffer solution, the solution chemistry functions to remove the acid or base by reacting with the components of the buffer to shift the equilibrium of the weak electrolyte left or right to remove the excess hydronium ions or hydroxide ions is a way that results in very little change in pH of the system. One should note that buffer solutions do not prevent changes in pH but minimize changes in pH. If enough acid or base is added the buffer chemistry can be destroyed.

In this problem, the weak electrolyte is HNO₂(aq) and the salt is KNO₂(aq). In equation, the buffer solution is 0.55M HNO₂ ⇄ H⁺ + 0.75M KNO₂⁻ . The potassium ion is a spectator ion and does not enter into determination of the pH of the solution. The object is to determine the hydronium ion concentration (H⁺) and apply to the expression pH = -log[H⁺].

Solution using the I.C.E. table:

              HNO₂ ⇄    H⁺   +   KNO₂⁻

C(i)        0.55M       0M      0.75M

ΔC            -x            +x          +x

C(eq)  0.55M - x       x     0.75M + x    b/c [HNO₂] / Ka > 100, the x can be                                    

                                                             dropped giving ...

           ≅0.55M        x       ≅0.75M        

Ka = [H⁺][NO₂⁻]/[HNO₂] => [H⁺] = Ka · [HNO₂]/[NO₂⁻]

=> [H⁺] = 6.80x010⁻⁴(0.55) / (0.75) = 4.99 x 10⁻⁴M

pH = -log[H⁺] = -log(4.99 x 10⁻⁴) -(-3.3) = 3.3

Solution using the Henderson-Hasselbalch Equation:

pH = pKa + log[Base]/[Acid] = -log(Ka) + log[Base]/[Acid]

= -log(6.8 x 10⁻⁴) + log[(0.75M)/(0.55M)]

= -(-3.17) + 0.14 = 3.17 + 0.14 = 3.31 ≅ 3.3

Answer:

a number assigned to an element in chemical combination which represents the number of electrons lost (or gained, if the number is negative), by an atom of that element in the compound

Explanation:

sodium, magnesium, iron is zero.

The definition of oxidation state is as follows: Oxidation state is a number given to the atom of an element when participating in a chemical reaction.

Therefore, oxidation state can be defined as a number given to the atom of an element when participating in a chemical reaction.

Learn more about oxidation state at: https://brainly.com/question/11313964

Answer:

Physical changes can be classified as reversible or irreversible. Melting is an example of a reversible physical change.

Explanation:

Answer:

ooooooooooo0000000000000

Answer:

Question 1: What material do you think can be a cheaper and better alternative to kerosene?

Answer: Generic lamp oil can be used to replace kerosene in lamps. The cheaper lamp oil burns cleaner and has less odor than the more expensive kerosene.

Question 2:

Correct answer is the last option

Hope this helps!

Answer:

Gin= Machine that picks cotton

Explanation:

This Machine was used in the early 1940s to help pick cotton to make things.

Answer:

Electrons on the outermost shell of an atom. They are responsible for the chemical properties of an atom.

Answer:

The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth's atmosphere.

Answer:

40

Explanation:

The total mass of calcium in the products is 40

The mass number (represented by the letter A) is defined as the total number of protons and neutrons in an atom. Consider the table below, which shows data from the first six elements of the periodic table. Consider the element helium. Its atomic number is 2, so it has two protons in its nucleus.

Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number.

Learn more about mass of calcium at

https://brainly.in/question/12273172

#SPJ2

inherited traits are passed from parent to offspring according to the rules of Mendelian genetics. Most traits are not strictly determined by genes, but rather are influenced by both genes and environment

Answer:

What Questions?

Explanation:

What Questions?

Answer:

Explanation:

What is the Questions frist ?

Answer:

Function A: +3

Function B: +2

y intercept is greater in Function B, the value is 16

Explanation:

Answer:

f4

Explanation:

your welcome.

Answer:

I believe not.

Explanation:

From what I have been told atoms can never come into contact beyond the electron barrier.

Answer:

1.51e23 atoms

Explanation:

First, using the molar mass of Si (28.1 g/mol), determine the # of moles of Si we have. Then use Avogadro's number (6.022e23 atoms = 1 mol) to convert the # of moles to the # of Si atoms.

(7.02 g Si)([tex]\frac{1 mol}{28.1 g}[/tex]) = 0.250 mol Si              

(0.250 mol Si)([tex]\frac{6.022*10^{23} atoms }{1 mol}[/tex]) = 1.51e23 atoms    

The atomic mass of Silicon (Si) is 28.09 g/mol. The no. of atoms present in 7.02 g of Si is 1.46 × 10²³.

Any substance containing  6.022 × 10²³ atoms is called one mole of that substance.  The no.of moles can be calculated by dividing the given weight by the atomic mass of the substance.

Atomic mass of Si = 28.09 g/mol

      Given mass    = 7.02 g.

       No.of moles  = 7.02 g/ 28.09 g/mol

                             = 0.24 moles

One mole contains  6.02 × 10²³ atoms. Thus 0.24 mole of Si contains  6.02 × 10²³ × 0.24  = 1.46 × 10²³ atoms.

Hence, no.of atoms present in 7.02 g of Si is 1.46 × 10²³ .

To learn more about no. of moles, refer the link below:

https://brainly.com/question/26416088

#SPJ2

Answer:

i think its solar radiation

Answer:

c

Explanation:

A disadvantage of disposing of waste polymers through recycling is that

they must first be separated.

Recycling is the process of forming new polymers and compounds as against their disposal .

Recycling involves separating the items into various sections such as paper,

plastic , metal etc. This is because they both undergo different recycling

processes.

The disadvantage of this process is that it's time consuming and also

expensive as a great amount of time and man power is needed to

separate the waste items.

Read more on https://brainly.com/question/24643504