Note that for a severe supercell ts to form over the great plains, one would expect the 5,000 AGL wind to be 190/45kts (Option D)
What is a supercell?A supercell thunderstorm is distinguished by the presence of a mesocyclone, which is a deep, continually revolving updraft. As a result, these storms are sometimes known as spinning thunderstorms.
Supercells are storms that have updrafts that spin along a vertical axis and are generally but not always thunderstorms. This rotation is caused by shear in the environmental wind field (a change in wind direction and/or speed with height) that surrounds the storm as it grows.
Supercell thunderstorms are intense, long-lived storms that are characterized by strong wind shear and rotational dynamics.
The wind shear, or the change in wind speed and direction with height, is a key factor in the development and maintenance of supercell thunderstorms.
Note that AGL means Above Ground Level; while
KTS means Knots. Knots are a unit measurement of speed. I nautical mile is usually equated to one knot.
Learn more about Supercells;
https://brainly.com/question/401575?
#SPJ1
Two blocks, with masses indicated in the figure above, are at rest on a horizontal surface and connected by a string of negligible mass and a compressed spring. There is negligible friction between the blocks and the surface. The string is cut, and the spring pushes the blocks away from each other. Which of the following statements are true about the motion of the blocks immediately after the string is cut? select two answers.
1. The velocity of the center of mass of the two-block system is zero.
2. The magnitude of the acceleration of the left block is greater than that of the right block.
The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.
Learn more about center of mass here:
https://brainly.com/question/27549055
#SPJ4
A uniform plane wave with parallel polarization is propagating in a lossless dielectric medium (l is € 1), and is incident obliquely onto a plane boundary with another lossless dielectric medium (u 2, E 2). (30%) (a) Derive the Snell's laws of reflection and refraction in terms of the refractive indices and angles. (b) Derive the general expressions for the reflection and the transmission coefficients of the EM field. Find such expressions in terms of the refractive indices if both media are nonmagnetic, i.e., M F M 240. (c) Derive the general expression for the Brewster angle. Find such an expression in terms of the refractive indices if both media are nonmagnetic. (d) Prove that, under the condition of no reflection, the sum of the Brewster angle and the angle of refraction is 90° if both media are nonmagnetic. (e) For total reflection to occur, find the condition for the medium property and the critical angle.
Transmission coefficients are used in physics and electrical engineering when considering wave propagation in discontinuous media. The snells law is n₁sinθ1 = n₂sinθ2
The transmission coefficient describes the amplitude intensity or total power of the transmitted wave relative to the incident wave. The transmission coefficient is defined as the ratio of the transmitted particle flux to the incident particle flux and depends on the incident energy.
The sum of the reflected and transmitted energy must equal the total incident energy, so the transmission coefficient is calculated simply by subtracting the reflection coefficient. The ratio of the reflected wave amplitude to the incident wave amplitude is called the reflection coefficient.
Learn more about The transmission coefficients here:- https://brainly.com/question/9323897
#SPJ4
A car moving with a speed of 90km/hr was brought to rest by the application of the
Brakes in 10s How far did the car travel after the brakes were applied?
The distance travelled by the car after the brake was applied is 125 m.
What is the distance travelled by the car?
The distance travelled by the car is calculated by applying the following kinematic equation as shown below.
Mathematically, the distance travelled by the car at the given average speed is calculated as;
s = [ ( v + u ) / 2 ] t
where;
v is the final velocity of the car = 0u is the initial velocity of the car = 90 km/hr = 25 m/st is the time of motion of the car = 10 sThe distance travelled by the car is calculated as;
s = [ ( 0 + 25 m/s ) / 2 ] ( 10 s )
s = 125 m
Learn more about distance travelled here: https://brainly.com/question/24283318
#SPJ1
apply the loop rule to loop 2 (the smaller loop on the right). sum the voltage changes across each circuit element around this loop going in the direction of the arrow. remember that the current meter is ideal.express the voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.
The voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.ΣΔV = 0 = I3 ⋅ R3 - I2 ⋅ R2.
When applying Kirchhoff's second rule the loop rule we need to identify closed loops and decide whether to loop clockwise or counterclockwise. For example, in Figure 3 the loop was traversed in the same direction as the current.
Loop 1 is the full loop and Loop 2 is the small loop on the right. To apply the loop rule, add all those voltage changes. Kirchhoff's Second Law, also known as Kirchhoff's Voltage Law states that the sum of all voltages around the closed loop of any circuit must be zero. This is a result of charge conservation and energy conservation.
Learn more about The loop rule here:- https://brainly.com/question/15705903
#SPJ4
A soccer player runs at 10 m/s and runs into a 80 kg referee standing on the field causing the referee to fly forward at 6.0 m/s. Assume the soccer player comes to complete stop after impact. What would be the mass of the soccer player be?
The mass of soccer player will be 120kg. Writing down 1/2 m1 will help us remember that KE = 1/2 mv2 (v1i) 2 + 1/2 m2(vi) (vi) 2 = 1/2 m1(v1f) (v1f) 2 + 1/2 m2 (v2f) (v2f) 2.
How to solve ?According to Newton's third law,
Given that a soccer player runs at 10m/s and plows into a 80kg referee standing on the field causing the referee to fly forward at 56m/s. Let
mass of the player = ?
initial velocity of the player = 10m/s
Final velocity of the player
mass of the referee = 80 kg
Initial velocity of the referee = 0 ( since he is at rest )
Final velocity of the referee = 6 m/s
Since it is a perfectly elastic collision,
U1 =V2 - V1 ........ (1)
M1U1 = M2V2 + M1V1........ (2)
Substitute all the necessary parameters into the equation (1)
10 = 6 - V1
V1 = 10 - 6
V1 = 4 m/s
Now, Substitute all the necessary parameters into the equation (2)
10M1 = (80 x 6) + (4M1)
10 M1- 4 M1 = 480
4M1 = 480
M1 = 480/4
M1 = 120kg
Therefore, the mass of soccer player will be 120kg
Collision formula: What is it?When kinetic energy (KE) and momentum (p) are conserved during a collision, the collision is said to be elastic. To put it another way, it denotes that KE0 = KEf and po = pf. Writing down 1/2 m1 will help us remember that KE = 1/2 mv2 (v1i) 2 + 1/2 m2(vi) (vi) 2 = 1/2 m1(v1f) (v1f) 2 + 1/2 m2 (v2f) (v2f) 2.
How is velocity determined?By dividing the entire distance traveled by the time it took the object to go a certain distance, you may calculate the object's initial velocity. V, d, and t are the three variables that make up the equation V = d/t.
Learn more about Collision here:
https://brainly.com/question/12497950
#SPJ1
(1) A table tennis ball is dropped
onto the floor from a height of
4m and it rebounds to a height of
3m. If the time of contact with the floor is 0.01s, what is the magnitude and direction of the acceleration during the contact.
Answer:
Here, h1=4.00m,h92)=3.00m,Delta t =0.01 s.Letv1 be the velocity of the ball (actind downwards) just before striking the floor an dv20 be the velocity of the ball (acting upwaeds) ust after striking the floor. Then, change in velocity of the ball in time Δtv2−(−v1)v2+v1
:. acceleration, a=v2+v1Δt ..(i)
When body falls from height h1,
then u=o,v1,a=gandS=h1
As, v21=u2+2aS,
:. v_(1) ^(2) =0 + g h_(10 or v12–√gh1
Taking motion of the ball after striking the floor, then u=v2,v=0,a=−g,S=h2
As, v2=u22as,∴v21=0+2gh1orv_(1) =sqrt 32 g h_(1)Tak∈gmotionoftheballa>erstrik∈gthe⌊,⌋thenu=v_(2), v=0, a=- g, S=h_(2)As,v2=u2+2aS,wehave0 = v_(2)^(2) +2 (-g) h_92) otr v2=2–√gh2
Putting values in (i) we get,
a=2–√gh2+2–√gh1Δt)
a=2–√×9.8×3+2–√×9.8×40.01
= 1652m/s2.
Explanation:
based on the graphic, in what part of the electromagnetic spectrum does vegetation have the strongest response?
Between 400 nm and 700 nm of the electromagnetic spectrum, vegetation has the strongest response.
The electromagnetic spectrum travels in waves and spans an extensive spectrum from very long radio waves to very brief gamma rays. The human eye can simplest come across only a small portion of this spectrum called visible light.
In order from maximum to lowest power, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible mild, infrared radiation, and radio waves.
In a tumbler, the purple mild travels the fastest, and the violet light travels the slowest of all seven hues. Velocity and wavelength are without delay proportional.
Learn more about Electromagnetic spectrum here:-https://brainly.com/question/23423065
#SPJ4
One of the most controversial ideas to come out of instinct theories of aggression was Lorenz's proposal that society provide acceptable ways of permitting , or the process of discharging built-up aggressive energy.
The general instinct hypothesis, which contends that people are physiologically predisposed to or possess inclinations for violent behaviours, is known as the instinct theory of aggression in psychology.
This theory is more focused on aggression. The instinct theory of aggressiveness holds that human aggression is akin to sex and hunger, and that it can only be regulated rather than eradicated.In an effort to understand why we become aggressive and whether that behaviours can be altered, psychologists have developed three primary theories of aggression. Although many hypotheses have been put out, these three have proven most reliable and are crucial to comprehending the origins of violence. These hypotheses comprise as,
Adversity theory based on instinctTheory of Frustration and AggressionTheory of Social LearningTo know more about theory of aggression
https://brainly.com/question/3197702
#SPJ4
Design a parallel RLC circuit (see (Figure 1)) with a resonant radian frequency of 5000 rad/s. Take that L 10 mH.a) Find the value of C Express your answer to three significant figures and include the appropriate units. C= 4.00 μFb) Find the value of R so that the response is critically damped. Express your answer to three significant figures and include the appropriate units R- 25.0 Ω
The value of R so that the response is critically damped using the equation is 25.0Ω.
What is Farads?Farads is the unit of measure for capacitance, which is the amount of electrical charge stored for a given voltage. Farads can be used to measure the amount of energy stored in a capacitor, which is made up of two conductive plates separated by an insulating material. The higher the capacitance, the more energy can be stored in a given capacitor. Farads are named after Michael Faraday, the British scientist who discovered the relationship between electricity and magnetism.
The resonant frequency of an RLC circuit is given by the equation:
ω_r=1/sqrt(LC)
where ω_r is the resonant frequency in rad/s, L is the inductance in Henries, and C is the capacitance in Farads.
Given the resonant frequency of 5000 rad/s and the inductance of 10 mH, we can calculate the capacitance as follows:
C=1/(ω_r^2*L)
C=1/(5000^2*0.01)
C=4.00μF
We can find the value of R so that the response is critically damped using the equation:
R=2*sqrt(L/C)
R=2*sqrt(0.01/4.00)
R=25.0Ω
To learn more about Farads
https://brainly.com/question/24175851
#SPJ1
Emily and Henry were in the lab and graphed the heating of ice to 125°C. Emily and Brad made an observation that the graph contains three sloped and two level portions. Emily and Brad determined that the two level portions in the graph represented:
The two level portions in the graph represented phase changes.
What are phase changes?
The transition of matter from one state (solid, liquid, gas, or plasma) to another is referred to as a phase change. These changes also take place when the pressure on the system varies, as well as when the system receives enough energy or loses enough energy.
The slope of the line dividing two phases is determined by the relative densities of the two phases. The solid-liquid line, for instance, slopes up and to the right if the liquid is less dense than the solid, whereas up and to the left if the liquid is denser than the solid.
Therefore the two level portions in the graph represented phase changes.
To know phase changes from the given link
https://brainly.com/question/24858284
#SPJ1
For a particular nonlinear spring, the relationship betweem the magnitude of the applied force F and the resultant displacement x from equilibrium is given by the equation F = k x^2 What is the amount of work done by stretching the spring a distace x0? A) kx0^3 B) (1/2)kx0 C) (1/2)kx0^3 D) (1/3)kx0^2 E) (1/3)kx0^3
To get the work, you have to integrate the force as a function of [tex]$x$[/tex] from zero displacement to Xo
[tex](Integral of) $\mathrm{k} \mathrm{x}^{\wedge} 2 \mathrm{dx}$ from 0 to $\mathrm{Xo}_{\mathrm{o}}=(1 / 3) \mathrm{k}\left(\mathrm{Xo}^{\wedge}\right)^{\wedge} 3$[/tex]
The work done by stretching the spring to the given distance is [tex]W=\frac{k x_0}{3}[/tex]
The given parameters:
- Applied force on the spring [tex]$=F$[/tex]
- Extension of the spring [tex]$=x_0$[/tex]
The work done by stretching the spring to the given distance is calculated as follows;
[tex]W=\frac{k x_0}{3}[/tex]
[tex]$$\begin{aligned}& W=\int_{x_a}^{x_b} F d x \\& W=\int_{x_a}^{x_b} k x^2 d x \\& W=k \int_{x_a}^{x_b} x^2 d x \\& W=k\left[\frac{x^3}{3}\right] \\& W=k\left[\frac{x_b-x_a}{3}\right] \\& W=k\left[\frac{x_0-0}{3}\right] \\& W=\frac{k x_0}{3}\end{aligned}[/tex]
Thus, the work done by stretching the spring to the given distance is
[tex]W=\frac{k x_0}{3}[/tex]
measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is applied in the direction of the displacement.
To learn more about work done visit:
https://brainly.com/question/13662169
#SPJ4
Determine the momentum of …
a. … an electron (m= 9.1 x10-31 kg) moving at 2.18 x 106 m/s (as if it were in a Bohr orbit in the H atom).
b. … a 0.45 Caliber bullet (m = 0.162 kg) leaving the muzzle of a gun at 860 m/s.
c. … a 110-kg professional fullback running across the line at 9.2 m/s.
d. … a 360,000-kg passenger plane taxiing down a runway at 1.5 m/s
A. The momentum of the electron is 1.98×10⁻²⁴ Kg.m/s
B. The momentum of the Caliber bullet is 139.32 Kg.m/s
C. The momentum of the professional fullback is 1012 Kg.m/s
D. The momentum of the passenger plane is 540000 Kg.m/s
What is momentum?Momentum is defined as the product of mass and velocity. It is expressed mathematically as:
Momentum = mass × velocity
A. How do I determine the momentum of the electron?
Mass of electron = 9.1×10⁻³¹ KgVelocity of electron = 2.18×10⁶ m/sMomentum of electron =?Momentum = mass × velocity
Momentum of electron = 9.1×10⁻³¹ × 2.18×10⁶
Momentum of electron = 1.98×10⁻²⁴ Kg.m/s
B. How do I determine the momentum of the Caliber bullet?
Mass of Caliber bullet = 0.162 KgVelocity of Caliber bullet = 860 m/sMomentum of Caliber bullet =?Momentum = mass × velocity
Momentum of Caliber bullet = 0.162 × 860
Momentum of Caliber bullet = 139.32 Kg.m/s
C. How do I determine the momentum of the professional fullback?
Mass of professional fullback = 110 KgVelocity of professional fullback = 9.2 m/sMomentum of professional fullback =?Momentum = mass × velocity
Momentum of professional fullback = 110 × 9.2
Momentum of professional fullback = 1012 Kg.m/s
D. How do I determine the momentum of the passenger plane?
Mass of passenger plane = 360000 KgVelocity of passenger plane = 1.5 m/sMomentum of passenger plane =?Momentum = mass × velocity
Momentum of passenger plane = 360000 × 1.5
Momentum of passenger plane = 540000 Kg.m/s
Learn more about momentum:
https://brainly.com/question/250648
#SPJ1
what is the length of the y component shown below?
The length of the y component shown is C. 2.0.
How to find the length ?We are given the angle of the vector, and the length of one of the components of the vetor. Given the angle we have, the available component is the hypotenuse. The y component that we are to find, will then be the opposite or perpendicular component.
To solve for the length of the y - component therefore, the useful operation would be the Sin function.
The length of the y - component would be:
Sin 42 ° = Opposite / Hypotenuse
Sin 42 ° = y component / Hypotenuse
y - component = Sin 42 ° x Hypotenuse
y - component = Sin 42 ° x 3
y - component = 0. 6691 x 3
y - component = 2. 0
In conclusion, the y - component is 2.0.
Find out more on y-component at https://brainly.com/question/3387587
#SPJ1
Full question is:
What is the length of the y-component of the vector shown below?
A. 2.2 B. 3 c. 2.0 D. 2.7A large cannon is mounted on a cart with frictionless wheels that is initially at rest on a horizontal surface. The cannon fires a large cannonball to the right with a speed v_b which is then caught by a trap firmly attached to the cart. What is the final speed of the cannoncart-cannonball system? V > v_b, to the left
The final velocity of the cannonball-cart system is less than the initial velocity of the cannonball and the system will move in the direction of the cannonball ( V < v_b ).
What is the law of conservation of linear momentum?
The law of conservation of linear momentum states that the sum of the initial momentum is equal to sum of the final momentum, provided that the system is Isolated.
Mathematically, the law of conservation of linear momentum is given as;
Pi = Pf
where;
Pi is the sum of the initial momentumPf is the sum of the final momentumm₁u₁ + m₂u₂ = v ( m₁ + m₂ )
where;
m₁ is the mass cannon ballu₁ is the initial velocity of the cannon ballm₂ is the mass of the cartu₂ is the initial velocity of the cartv is the final velocity of the cannoncart-systemsince the cart is initially at rest, the initial velocity of the cart = 0
m₁u₁ + 0 = v ( m₁ + m₂ )
m₁u₁ = v ( m₁ + m₂ )
v = ( m₁u₁ ) / ( m₁ + m₂ )
given initial velocity of the cannon ball = v_b
The final velocity of the cannonball-cart system is calculated as follows;
V = ( m₁v_b ) / ( m₁ + m₂ )
Hence, V < v_b
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
The smoke from the Old Man’s furnace travels up from the basement at a velocity of |.5 meters per second. Ralphie is sitting in the kitchen above and can smell the smoke within 6 seconds. What is the approximate distance that the smoke travels up from the furnace?
The approximate distance that the smoke travels up from the furnace is 9metres.
What is distance?Distance is described as a numerical or occasionally qualitative measurement of how far apart objects or points are. In the field of physics or everyday usage, distance is usually referred to a physical length or an estimation based on other criteria.
Parameters given:
Velocity = 1.5
time = 6 seconds
We know that distance = speed x time
Hence, distance = 1.5 x 6 seconds
distance = 9 meters.
Distance is a scalar quantity that refers to how much ground an object has covered in the course of its motion while we can describe displacement as a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.
Learn more about distance at: https://brainly.com/question/26046491
#SPJ1
if an object producing sound is moving away from you, you would observe a wavelength than an object moving toward you. group of answer choices
If an object producing sound is moving away from us, the wavelength of the sound heard is longer than the actual wavelength. The conclusion is from the concept of Doppler effect.
What is the Doppler effect?The Doppler's effect is a phenomenon when the source of a wave and an observer move relative to each other, the frequency heard is not the same with the actual frequency.
The equation of the Doppler effect is
f₀ = [(v ± v₀)/(v ± vs)] × fs
Where
f₀ = observer frequency of soundv = speed of sound waves (340 m/s)v₀ = observer velocityvs = source velocityfs = actual frequency of sound wavesNote:
v₀ (+) if the observer moves closer to the sound source.vs (+) if the sound source moves away from the observer.When an object producing sound is moving away from us, the frequency of the sound we heard changed.
Let's say we are at rest, it means v₀ = 0. The sound source is moving away makes vs (+).
With the Doppler's effect, we get
f₀ = [(v+0) / (v+vs)] × fs
f₀/fs = v/(v+vs)
v < v+vs
f₀ < fs
The frequency of sound we heard is lower that the actual frequency.
The wavelength is inversely proportional to the frequency. It is described in the equation:
λ = c/f
It means that the lower the frequency, the longer the wavelength.
Hence, the phenomenon which the wavelength of the sound we heard is longer than the actual wavelength when the sound source is moving away from us is called the Doppler's effect.
Here is the group of answer choices:
(a) Band width
(b) Doppler's effect
(c) Sound refraction
(d) Vibrations
Learn more about Doppler's effect here:
https://brainly.com/question/29672712
#SPJ4
A(n) ____________________ is a dynamic variable on the free store without any pointer pointing to it.
A inaccessible object is a dynamic variable on the free store without any pointer pointing to it.
How to find the height of an inaccessible object using sextant?Utilize the sextant's arc to determine the angle. By dividing the object's distance from the point of observation by the tan of the angle you calculated, you may use a scientific calculator to get the object's height.
How can heights and distances that are absent or unavailable be measured?The measuring of heights and distances that are unreachable is made easier by right-triangle trigonometry. By drawing a right triangle with the unknown height or distance as one of its sides and a known side and angle on the other, it is possible to determine the unknown height or distance.
To know more about inaccessible object visit:
https://brainly.com/question/21989844
#SPJ4
Answer:
dynamic variable
which of the following sequences lists methods for determining distance in the correct order from nearest to farthest?
Parallax, main-sequence fitting, cepheid variables, Tully-Fisher relation, and Hubble's law are the sequence lists methods for determining distance.
Parallax is the closest method for determining distance. This method uses the principle of triangulation to measure the distance of a nearby star relative to Earth. Main-sequence fitting is another method used to measure the distance of stars. This method compares the brightness of a star to other stars of known distance and luminosity to determine its distance.
Cepheid variables are stars whose brightness varies in a predictable way over time. This method uses the period of the star's brightness to determine its intrinsic luminosity, and then its distance. The Tully-Fisher relation is a method for measuring the distance of galaxies. This method uses the rotation speed of the galaxy and its brightness to calculate its distance.
Finally, Hubble's law is the most distant method for determining distance. This law states that the farther away a galaxy is, the faster it moves away from us. This allows us to calculate the distance of galaxies by measuring their rate of recession.
For more questions like Hubble's law click the link below:
https://brainly.com/question/29869676
#SPJ4
the use of the doppler effect in the study of astronomy
A certain 50.0-Hz AC power line radiates an electromagnetic wave having a maximum electric field strength of 13.0 kV/m. (a) What is the wavelength of this very low frequency electromagnetic wave? (b) What is its maximum magnetic field strength?
An electromagnetic wave radiating from a specific 50.0-Hz AC power line has a maximum electric field strength of 13.0 kV/m. This extremely low frequency electromagnetic pulse has a wavelength of 6.00 x [tex]10^{6}[/tex]m.
An electromagnetic wave is what?A sinusoidal graph illustrates electromagnetic waves. It is made up of time-varying electric and magnetic fields that are perpendicular to each other and to the direction that waves travel.
How do wavelength and frequency relate to one another?Inverse proportionality describes the relationship between frequency and wavelength. Longer wavelengths are correlated with lower frequency, and vice versa. The fact that a wave's speed is equal to the product of its frequency and wavelength helps to explain how these two properties are related.
Briefing:
Given that,
Frequency of the power line, f = 50.0 Hz
Value of maximum electric field strength of 13.0 kV/m
The wavelength of this very low frequency electromagnetic wave is given by using relation as:
[tex]c = f[/tex]λ
λ [tex]= \frac{c}{f}[/tex]
λ [tex]= \frac{3.8 * 10^{8} m/s }{50}[/tex]
λ = 6 x [tex]10^{6}[/tex] m
To learn more about frequency visit:
brainly.com/question/14316711
#SPJ4
What is the Force of Gravity acting on the object in the diagram?
The force of gravity acting on the 23 Kg object in the diagram is 225.4 N
How do I determine the force of gravity?The force of gravity is defined as follow:
Force of gravity (F) = mass (m) × acceleration due to gravity (g)
Using the above formula, we can easily obtain the force gravity acting on the 23 Kg object. This is shown below:
Mass (m) = 23 KilogramsAcceleration due to gravity (g) = 9.8 m/s²Force of gravity (F) =?Force of gravity (F) = mass (m) × acceleration due to gravity (g)
Force of gravity = 23 Kg × 9.8 m/s²
Force of gravity = 225.4 N
Thus, from the calculation made above, we can conclude that the gravitaional force is 225.4 N
Learn more about force:
https://brainly.com/question/12163222
#SPJ1
a particle moves under the influence of a conservative force. the equation for the potential energy as a function of position is given by: u(x)
A particle moves under the influence of a conservative force, The maximum x-coordinate of the particle at x = -3 m is 7 m.
Given that,
Potential energy of the particle u(x) = 5x² - 20x + 2
We know the relation between force and potential energy as,
F = -du/dx = -d/dx (5x² - 20x + 2) = -(10 x - 20 ) = 20 - 10 x at mean position x = 2.
At x = -3, amplitude is given by x = 2 - (-3) = 5
The maximum x co-ordinate is given as x = 5 + 2 = 7 m
To know more about potential energy function:
https://brainly.com/question/29998972
#SPJ4
A wire loop, 2 meters by 4 meters, of negligible resistance is in the plane of the page with its left end in a uniform 0.5-tesla magnetic field directed into the page, as shown above. A 5-ohm resistor is connected between points X and Y. The field is zero outside the region enclosed by the dashed lines.
If wire loop is being pulled to the right with a constant velocity of 3 meters per second , then the potential difference induced between points X and Y is 3V .
it is given that a 5Ω resistor is connected between points X and Y ;
the magnetic field (B) = 0.5 ;
length of wire (l) [tex]=[/tex] 2 ;
velocity of the wire loop (v) = 3 m/s ;
the potential difference will be induced because charge separation on the vertical hand wire of wire loop.
Points X and Y are the same as the top and bottom of left wire.
The EMF(potential difference) induced in wire is given by
EMF = B*l*v
substituting the values ,
we get
= (0.5)(2)(3) = 3V
Therefore , the induced potential difference between points X and Y is 3V .
The given question is incomplete , the complete question is
A wire loop, 2 meters by 4 meters, of negligible resistance is in the plane of the page with its left end in a uniform 0.5-tesla magnetic field directed into the page. A 5-ohm resistor is connected between points X and Y. The field is zero outside the region enclosed by the dashed lines. The loop is being pulled to the right with a constant velocity of 3 meters per second. Make all determinations for the time that the left end of the loop is still in the field, and points X and Y are not in the field.
Determine the potential difference induced between points X and Y.
Learn more about Magnetic Field here
https://brainly.com/question/27679280
#SPJ4
Question
A rabbit moves a distance of 85 meters in 13 seconds.
What is the rabbits average speed?
7.26 m/s
0.15 m/s²
6.54 m/s
6.54 m/s²
Important Formula:
[tex]s=\dfrac{d}{t}[/tex]
__________________________________________________________
[tex]d=85m[/tex] (measured in meters)
[tex]t=13s[/tex] (measured in seconds)
[tex]s=?[/tex] (measured in meters per second; m/s)
__________________________________________________________
[tex]s=\dfrac{d}{t}[/tex]
[tex]s=\dfrac{85}{13}[/tex]
__________________________________________________________
[tex]\fbox{6.54 m/s},\fbox{Option C}[/tex]
for the circuit below all values are rms with a source frequency of 60 hertz. the generator impedance is negligible (0 w). calculate the value of ib and and determine the value of vb-n. now, calculate the rms values of apparent, real and reactive power of zb. (show units for all)
The reactive power of the branch (Qb) can be calculated from its voltage and current 676.16 VA.
What is reactive power?Reactive power is the power in an AC circuit that is required to establish and maintain a voltage across a load. It is associated with the storage and release of energy in the form of electric and magnetic fields. Reactive power does not contribute to the actual work output of a system and is measured in Volt-amperes reactive (VARs). Power factor is a measure of reactive power relative to the total power in a system.
Source frequency = 60 Hz
Generator impedance = 0 W
Circuit:
Vg = 170 V
R1 = 10 Ω
R2 = 20 Ω
Zb = 20 + j10 Ω
The current flowing through the generator (Ig) and the branch (Ib) can be calculated from Ohm's Law:
Ig = Vg/R1 + Vg/R2 = 170/10 + 170/20 = 17 A
Ib = Ig - Vg/Zb = 17 - 170/(20 + j10) = 17 - 16.4 + j4.4 = 0.6 + j4.4 A
Since Ib is a complex number, we can find its magnitude (|Ib|) and angle (θ):
|Ib| = √(0.6² + 4.4²) = 4.46 A
θ = tan⁻¹(4.4/0.6) = 80.16°
The voltage across the branch (Vb-n) can be calculated using Ohm's Law:
Vb-n = Ib × Zb = (0.6 + j4.4) × (20 + j10) = -8.4 + j74.4 V
The apparent power of the branch (Sb) can be calculated from its voltage and current:
Sb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = -45.48 + j367.04 VA
The real power of the branch (Pb) can be calculated from its voltage and current:
Pb = Vb-n × Ib = (-8.4 + j74.4) × (0.6 + j4.4) = -45.48 - j367.04 W
The reactive power of the branch (Qb) can be calculated from its voltage and current:
Qb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = 676.16 VA
To learn more about reactive power
https://brainly.com/question/23230296
#SPJ4
aphasia
Due to an automobile accident, Jenny suffered damage to her cerebral cortex in Broca's area. Jenny is most likely to experience:
Due to an automobile accident, Jenny suffered damage to her cerebral cortex in Broca's area. Jenny is most likely to experience: aphasia.
Aphasia is the inability to understand or form language due to damage to certain areas of the brain The main causes are stroke and head trauma. Although the prevalence is difficult to determine, aphasia due to stroke is estimated at 0.1-0.4% in the Global North. Aphasia can also be the result of a brain tumor, brain infection, or neurodegenerative disease (such as dementia).
To be diagnosed with aphasia, communication after an acquired brain injury Speech or language must be significantly impaired in one (or more) of the four aspects of Alternatively, in the case of progressive aphasia, it must have decreased significantly over a short period of time. The four dimensions of communication are auditory comprehension, verbal expression, reading and writing, and functional communication.
Learn more about Aphasia here : https://brainly.com/question/4045064
#SPJ4
What does the law of conservation of energy state?
energy cannot be destroyed but it can change forms
energy always gets used up in every chemical reaction
energy can be destroyed but not created
energy is always the same and it cannot be changed
I think it is "energy cannot be destroyed but it can change forms".
Field poles are electromagnets whose ____ change as the flow of current alternates in the field windings.
Field poles are electromagnets whose polarities change as the flow of current alternates in the field windings.
An electromagnet is a sort of magnet wherein the magnetic area is produced with the aid of an electric current. Electromagnets generally encompass cord wounds into a coil. A cutting edge through the wire creates a magnetic discipline that is focused inside the hole in the middle of the coil.
Electromagnets create a magnetic discipline through the application of power. When you introduce the modern, either from a battery or any other supply of strength, it flows through the wire. This creates a magnetic discipline around the coiled cord, magnetizing the metal as though it were a permanent magnet.
Learn more about Electromagnets here:-https://brainly.com/question/1408043
#SPJ4
