Answer:
DataExplanation:
Data are the facts, figures, and other evidence gathered through observations.
descoberto em 1996 por pesquisadores alemães o novo elemento químico de numero 112 poderá ser batizado de copernicium em homenagem ao cientista e astronomo Nicolau Copérnico segundo os cientistas o elemento é aproximadamente é 277 vezes mais pesado que o hidrogênio, o que torna o elemento mais pesado da tabela periódica ocupando a posição relativaa ao 7°periodo do grupo 12. A tabela periódica, uma das realizaações mais notáveis da quimica, foi desenvolivda exclusivamente a partir das propriedades fisícas e químmicas dos elementos e, por isso, o conhecimento da posição ocupada por um elemento químico permite que se façam algumas previsões quanto às suas propriedades.
considerando a localização dos átomos dos elementos químicos x, y e z na tabela periódica é incorreto afirmar que
x = 3° período do grupo 1 (I A)
y = 2° período do Grupo 14 (IV A)
z = 2° período do grupo 16 (VI A)
Answer:
Loading...
Explanation:
If zinc has an atomic number of 30 and a mass number of 65 what is the correct number of protons neutrons and electrons ?
Answer:
protons 30
neutrons 35
electrons 30
4.250 x 10-6 nm in standard form , please help!!
Answer: 4,250 x 10 - 6
Explanation: ok so we have a decimal number, what you do with that is
[tex]4.250 x 10^{3}[/tex] = 4.250 x 1,000 = 4,250 now you can just move the decimal every time without that equation but its better safe. I'm pretty sure that's how they want it, because its not expanded or word.
Element Z has 2 natural isotopes. One isotope has a mass of 15.0 amu and a relative abundance of 30%. The other isotope has a mass of 16.0 amu. What is the second isotope's relative abundance?
Answer:
70%
Explanation:
Just substract 100 % - 30%
!!DUE TODAY, NEED HELP ASAP!!
A student measured the masses of some aluminum and copper cylinders of different volumes. The data is displayed below:
Aluminum: Copper:
Volume (mL)
Mass (g)
Volume (mL)
Mass (g)
3.7
9.99
1.8
16.02
6
16.2
2.3
20.47
8.5
22.99
3.5
31.15
10.74
29
4.2
37.38
15
40.5
5.8
51.62
On graph paper graph the data above on ONE graph. Use the graph paper so the longer side is your y-axis.
Use up the majority of the graph paper. Do not make a small graph!
Use a ruler/straight edge so you graph is neat.
You will need to plot the points for each substance and create a double line graph. When connecting your points for each substance, continue the lines past the plotted points.
Be sure to include a key to identify the substances.
Make your X-axis volume(mL) and your Y-axis mass(g)
Look at the numbers for both substances when creating your scales. You will most likely have a different scale for mass and volume. What is the lowest number? What is the highest number? What does it make sense to go by?
Calculate the density of each metal.
Aluminum:_________________________ Copper:________________________
What happens to the mass of the copper at the volume increases from 6 to 8mL?
Which sample is more dense? How does the graph show you this?
Answer: The data are not arranged in a useful pattern. I arranged them as best I could and made a graph in Excel for demonstration.
Explanation: The data are plotted with mass on the x axis and volume on the y. Add a key to identify the top line as CU and the bottom as Al.
The density of Cu is 8.9 g/ml and 2.70 for Al.
The mass of copper increases by 17.8 grams going from 6 to 8 ml. (8.9 g/ml)*(2 ml) = 17.8 grams.
Copper is more dense. c The graph shows that for the same volumes, copper has the higher mass.
Through _
plants move enormous quantities
of water from soil to air .
Explanation:
The water eventually is released to the atmosphere as vapor via the plant's stomata — tiny, closeable, pore-like structures on the surfaces of leaves. Overall, this uptake of water at the roots, transport of water through plant tissues, and release of vapor by leaves is known as transpiration
Through transpiration, plants move enormous quantities of water from the soil to the air.
Transpiration is the process by which plants lose water vapor through small openings called stomata in their leaves. Water is taken up by the roots from the soil and transported to the leaves through the xylem vessels. Once in the leaves, water evaporates from the surface of the cells and exits through the stomata into the surrounding air.
This continuous loss of water through transpiration creates a pulling force, known as the transpiration pull or tension, which helps to draw water upward from the roots. As water molecules evaporate from the leaves, more water is pulled up through the plant's vascular system to replace the lost water.
Transpiration not only aids in the transport of water and nutrients from the roots to the rest of the plant, but it also plays a crucial role in regulating the plant's temperature, maintaining cell turgidity, and facilitating the movement of minerals within the plant.
To know more about transpiration here
https://brainly.com/question/32368258
#SPJ2
which elements are liquid in the periodic table?
Read the information in the table below:
Reaction
Description Energy to IS break bonds is more tha renergy release to form bonds Energy to break bonds is less than energy release to form bonds
Which type of reaction is represented by B?
Answer: Exothermic
Explanation: The energy of the reactants is leass than that of the products. Conservation of energy means that the excess is given off, or exothermic.
Help!! due tomorrow
.
Answer:
It's B. The molecules in the system have more kinetic energy than a solid.
what are lower and higher energy levels.
Answer:
If an atom, ion, or molecule is at the lowest possible energy level, it and its electrons are said to be in the ground state. If it is at a higher energy level, it is said to be excited, or any electrons that have higher energy than the ground state are excited
Explanation:
pls mark brainliest
Isotope ?-1 has an atomic mass of 1.
99.985% of all atoms of element ? are of this
form.
Isotope ?-2 has an atomic mass of 2
0.015% of all atoms of element ? are of this form.
Answer: Isotope-1: Hydrogen (H)
Isotope-2: Deuterium (H)
Explanation: The periodic table shows that the smallest element in hydrogen (H), at an average atomic weight of 1.008. Hydrogen-1 has one proton, one electron, and no neutrons, which adds to 1 AMU. Hyrogen-2 is an isotope of hydrogen that contains 1 neutron in addition to the proton, bringing the mass to 2 AMU. It is only at 0.0156% abundance on Earth and is given the name Deuterium, sometimes refered to as "heavy water" when incorporated into a water molecule. A third isotope has 2 neutrons, and is called Tritium.
Help Please I need to finish TODAY
Answer:
A. > digestive and circulation
B. > digestive and excertory
C. > nervous and muscluar
D.> digestive and circulation
hope this helps !! please make brainlest!
Most electrochemical cells are the site of redox reactions. They contain 2 electrodes, the ______ where reduction occurs and the _______
A. cathode, anode
B. None of these
C. anode, galvanode
D. anode, cathode
Answer:
A.cathode,anodeExplanation:
positive and negative
pls make me the brainliestHow many nickels are there in $5.25?
Answer:
105
Explanation:
1 nickel = 5 cents
5.25 dollars x 100 cents
= 525 cents
525 cents / 5 cents
= 105 nickels
electrolysis of aqueous copper(2) sulfate half ionic equation
Answer:
Copper is less reactive than hydrogen, so copper (Cu) is produced at the negative electrode. The half equation is: Cu2+ + 2e- → Cu
The hydroxide ion is more reactive than the sulphate ion, therefore this forms water (H2O) and oxygen at the positive electrode.
How many kilojoules are required to raise the temperature of a 150. g sample of silver from 25 °C to 135 °C? Silver has a specific heat of 0.235 J/g °C.
Answer:
3.8775 kJ
Explanation:
The formula is Q=mcdeltat
We know m (mass) is 150, c (specific heat) is 0.235, and delta t (change in temperature) is 135-25=110
Plug that in and solve for Q
150*0.235*110=3877.5 J
The problem is that this is still in joules so we have to convert to kilojoules
3877.5 J * 1 kJ/1000 J = 3.8775 kJ
Why the volume of a gas is not measured immediately after it is collected?
Answer:
Collecting gas over waterWhen collecting oxygen gas and calculating its partial pressure by displacing water from an inverted bottle, the presence of water vapor in the collecting bottle must be accounted for; this is easily accomplished using Dalton’s Law of Partial Pressures.
Which phrase best describes a period on the periodic table?
a. elements that are in the same group
b. elements that have the same number of electrons
c. a column of elements
d. a row of elements
Answer:
d. a row of elements
Explanation:
Elements that are in the same group, have same number of electrons and make up a column in a periodic table.
[tex].[/tex]
The phrase which best describes a period on the periodic table is; a row of elements.
The elements in the periodic table are divided into rows and columns. The rows are called the periods while the columns are called the groups.
This means that a period is best described as a row of elements from the foregoing.
Therefore, the correct answer is option D: a row of elements.
Learn more: https://brainly.com/question/11155928
the energy required for the complete removal of 1 mol of electrons from 1 mole of gaseous atoms or ions is called energy. For a neutral element this energy is a measure of how easily the element forms an ion with a charge.
Answer: I believe you may have meant "ionization energy?" Yes, for a neutral element this is a measure of the energy required to remove a valence electron.
Explanation: See above.
By definition, The energy required for the complete removal of 1 mol of electrons from 1 mole of gaseous atoms or ions is called Ionization energy. For a neutral element this energy is a measure of how easily the element forms an ion with a charge.
The electrons are attracted to the nucleus and it is necessary to provide energy to start them.
Ionization energy is the energy required to remove an electron from a gaseous atom, isolated and in a ground state. The electrons in the last shell, which are the weakest attracted to the nucleus, are always lost. In this way the neutral atom becomes a gaseous cation (positively charged ion).
The further away the electron is from the nucleus, the easier it is to remove it, that is, the less energy is needed.
Finally:
The energy required for the complete removal of 1 mol of electrons from 1 mole of gaseous atoms or ions is called Ionization energy. For a neutral element this energy is a measure of how easily the element forms an ion with a charge.
Learn more:
https://brainly.com/question/24409114brainly.com/question/16243729?referrer=searchResults brainly.com/question/11623163?referrer=searchResults brainly.com/question/1602374?referrer=searchResultsHow many atoms of each elements are in three molecules
Answer:
Molecules of compounds have atoms of two or more different elements. For example, water (H2O) has three atoms, two hydrogen (H) atoms and one oxygen (O) atom.
Explanation:
where did they start water conservation in tamil nadu . short answer
Explanation:
The 2019 water crisis in Chennai has made us realize the importance of saving water more than ever. Water, as we all know, is a finite resource without which our planet would be a barren wasteland. Today with our increasing population it would be logical to say that our water consumption has also increased. And with increasing demand and lesser supply, water scarcity arises. Our ancestors who had foreseen the potential dangers of water scarcity had developed methods to conserve water that was suited for the varied terrain of the Tamil-speaking kingdoms.
Traditional Rainwater Conservation methods of Tamil Nadu
Eri
There are no perennial rivers in Tamil Nadu except the Thamirabharani River which flows through Thirunelveli district. And so, several hundred years ago a simple system was devised to utilize the rainwater to the fullest. An Eri or tank system is one of the oldest forms of water conservation systems in India. Many Eris are still in use in Tamil Nadu and play an active role in irrigation. They act as water reservoirs and flood control systems. They prevent soil erosion, recharge groundwater, and prevent wastage of runoff water during heavy rainfall.
Kudimaramathu
Kudimaramathu is one of the old traditional practice of stakeholders participating in the maintenance and management of irrigation systems. During earlier days, citizens of a village used to actively participate in maintaining the water bodies of their village by deepening and widening the lakes and ponds and restoring the water bodies back to their original form. The silt, rich in nutrients, collected in the process would be used by the farmers themselves in their field. A sense of collective ownership ensured the continued survival of the water bodies.
Density and Years: What do you know?Objectives: determine and compare density of pennies to assess composition. Procedure:1. Read the directions and create a data table accordingly.2. Place 15-20 pennies in order of consecutive dates. Find the mass of each penny and record.3. Find the volume of all 5 pennies by water displacement and record in your data table. Record the volume adding 5 more pennies at a time until you have measured them all (15-20).a. Find the average volume of 1 penny.4. Calculate the density of each penny and graph according to the year.5. If the density of copper is 8.96 g/cm3 what would the mass of a pure copper penny be?6. Draw a conclusion.7. How might this relate to a real world example?
Answer:I dunno
Explanation:it is the best thing I ever said in this app
English
M.
3.x - 9
2r-7
.X + 2
18
Answer:
it will come answer 21 write
Nitrogen oxide emissions combine with water vapor, producing nitric acid
a
Chemical Change
b
Physical Change
Answer:
chemical change
I hope it's helps you
A compound contains only carbon, hydrogen, and oxygen. Combustion of 8.544 mg of the compound yields 12.81 mg CO2 and 3.50 mg H2O. The molar mass of the compound is 176.1 g/mol. What are the empirical and molecular formulas of the compound
Answer:
The empirical formula is the formula with a minimum whole number ratio of the constituent atoms present in a molecule. While the molecular formula has the actual number of atoms of various elements present in the molecule of the substance.
Empirical formula is C₃H₄O₃
Molecular formula is C₆H₈O₆
This question involves finding the empirical and molecular formulas. Empirical formula is the one where minimum whole number ratio of the constituent atoms present in a molecule is shown whereas molecular formula is the one that shows the number of each type of atom that are present in a molecule.The compound contains only carbon, oxygen and hydrogen and undergoes combustion. Thus;[tex]C_{x}[/tex][tex]H_{y} O_{z}[/tex] + O₂ ⟶ xCO₂ + [tex]\frac{y}{z} H_{2} O[/tex]
The combustion yields 12.81 mg of CO₂.From online sources, molar mass of CO₂ = 44 g/mol
number of moles of CO₂ = 12.81/44 = 0.291m mol
Mass of carbon in it is; C = 12 × 0.291 = 3.492 mg
Similarly the combustion yields 3.50 mg H2O.molar mass of water = 18 g/mol
number of moles of water in it = 3.5/18 = 0.194m mol
Hydrogen has 2 nos in water and so;
number of moles of hydrogen = 2 × 0.194 = 0.388m mol
Mass of hydrogen = 1 × 0.388 = 0.388 mg
Compound is 8.544 mg and so;Oxygen mass = 8.544 - (3.492 + 0.388) = 4.664 mg
Similarly, moles of oxygen that has molar mass of 16 is;
no of moles of oxygen = 4.664/16 = 0.2915m mol
Thus;Ratio of C:H:O is; 0.291:0.388;0.2915
Simplifying this gives us the empirical formula ratio as;
3:4:3
Thus;
Empirical formula is C₃H₄O₃
Molar mass of C₃H₄O₃ = (12 × 3) + (1 × 4) + (16 × 3) = 88 g/molWe are told that the molar mass of the compound is 176.1 g/mol.
Thus;
Molecular formula is; (176.1/88)C₃H₄O₃ = C₆H₈O₆
Read more at; brainly.com/question/14853529
How is energy stored in a Van der Graaf generator?
A. Energy is stored in the nucleus
B. Energy is not stored
C. Energy is stored in the chemical bonds
D. Energy is stored in an electrical field
Answer:
C
Explanation:
A Van de Graaff generator is an electrostatic generator which uses a moving belt to accumulate electric charge on a hollow metal globe on the top of an insulated column, creating very high electric potentials. It produces very high voltage direct current (DC) electricity at low current levels
An element has an atomic number of 16. An ion of this element has a 2-charge. How was the ion formed?
Answer: The answer is ‘a neutral atom gained 2 electrons’
Explanation: Because electrons are negatively charged and adding 2 extra would make the ion negatively charged by 2
Answer:
The answer to all the quiz questions are
Explanation:
1. Which statement describes the number of protons in each atom of an element?
*The number of protons is given by the atomic number, which increases by one moving from left to right across each row of the periodic table.*
2. An element has an atomic number of 16. An ion of this element has a 2– charge. How was the ion formed?
*A neutral atom gained 2 electrons.*
3. Rubidium has an atomic number of 37 and a mass number of 85. How many protons, neutrons, and electrons does an ion of rubidium with a 1+ charge have?
*37 protons, 48 neutrons, and 36 electrons*
4. There are three stable forms of neon: neon-20, neon-21, and neon-22. Which statement is true?
*Their atomic masses differ.*
5. Beryllium has an atomic number of 4. How many neutrons does the isotope beryllium-9 have?
*5*
can any one tell me same for ALCL3 I need it urgently plzzz
Lets Form bonds
Al=2,8,3
Lets Write actual configuration or modern
[tex]\\ \sf\longmapsto 1s^22s^22p^63s^3[/tex]
It has valency +3Cl:-2,8,7Let's write configuration
[tex]\\ \sf\longmapsto 1s^22s^22p^63s^23p^5[/tex]
It has valency -1Now Criss cross valency (Refer to attachment)
We get
[tex]\\ \sf\longmapsto AlCl_3[/tex]
What correctly describes the melting of a solid
The particles in the solid LOSE enough energy to OVERCOME the interactions between the particles
The particles in the solid GAIN enough energy to FORM the interactions between the particles
The particles in the solid GAIN enough energy to OVERCOME the interactions between the particles
The particles in the solid LOSE enough energy to raise the temperature of the solid enough to turn it into a
liquid
Answer:
A reaction in which heat is absorbed by reactant molecules and energy of products become more than reactants is known as an endothermic reaction
Chewing food to break it down into smaller particles represents a physical change, but the charging of starch into sugars by enzymes in the digestive system represents a chemical change.Chemical or physical change?
Answer:
Chemical changeExplanation:
The charging of starch into sugars by enzymes in the digestive system shows a chemical change.[tex]\tt{ \green{P} \orange{s} \red{y} \blue{x} \pink{c} \purple{h} \green{i} e}[/tex]