Answer:
Step-by-step explanation:
To factor 25x^6 + 10x^3 + 12, we can first factor out the greatest common factor of the three terms which is 1, then use a substitution:
Let's substitute y = x^3. Then, the expression becomes:
25y^2 + 10y + 12
We can now try to factor this quadratic expression. However, since the discriminant (b^2 - 4ac) of this quadratic equation is negative (10^2 - 4*25*12 = -440), this expression cannot be factored using real numbers.
Therefore, the final answer for the factoring is:
25x^6 + 10x^3 + 12 = (unfactorable)
I am stuck on this question..
The output of the definite integral and summation expression can be presented as follows;
[tex](\frac{\int\limits^1_0 {(\sum\limits_{n=5}^5 n\cdot 5 \cdot \sqrt{25} )} \, dx }{\int\limits^1_0 {(\sum\limits_{n=2}^5 2 + 6)} \, dx } ) = \frac{125}{32} =3\frac{29}{32}[/tex]
What is the difference between definite and indefinite integral?An indefinite integral is an antiderivative of a function, while a definite integral is the limit of a sum of areas of rectangles.
The steps to integrate the specified definite integral expression can be presented as follows;
The integrals and the summations in the question are simplified thus;
Sum n = 5 to 5 n × 5 × √(25) is the sum of n times 5 times √(25) over the range [5, 5], which is the same as 5 × 5 × √(25) = 125
Sum n = 2 to 5, 2 + 6 is the sum of (2 + 6) over the range [2, 5], which, based on the operation is (2 + 6) + (2 + 6) + (2 + 6) + (2 + 6) = 32
The integration of the above summations are found as follows;
Integrate 125 dx from 0 to 1 is the definite integral of the constant function, 125, over the interval [0, 1], which is the same as 125 × (1 - 0) = 125.
The integration of 32 dx from 0 to 1 is the definite integral of the constant function 32 over the interval [0, 1], which is just 32 × (1 - 0) = 32
Plugging in the above values into the original expression, we get;
[tex]\frac{\int\limits^1_0 ({\sum\limits_{n=5}^5}n\cdot 5\cdot \sqrt{25} ) \, dx }{\int\limits^1_0 (\sum\limits_{n=2}^5 2+6) \, dx } = \frac{125}{32}[/tex]
Learn more on evaluation of integrals here: https://brainly.com/question/29853090
#SPJ1
Q4.
The diagram shows a regular hexagon OABCDE.
a
E
OA = a
AB = b
M is the midpoint of OE.
N is the midpoint of AB.
(a) Find MN in terms of a and/or b.
b
B
D
Diagram NOT
accurately drawn
By answering the presented question, we may conclude that So, the Pythagorean theorem length of MN is expressed in terms of a and b.
What is Pythagorean theorem?Its Pythagorean theorem is just a fundamental mathematical principle that explains the connection between the sides of a triangle that is right. It asserts that the sum of the squares of both the widths of the other two sides is a square of both the width of the hypotenuse (the side facing the perfect angle) the side opposite the right angle). The mathematical mathematics is as follows: c2 = a2 + b2 At which "c" indicates the length of the right triangle and "a" and "b" reflect the extents of the additional two sides, started referring to as the legs.
Because M is the midpoint of OE and N is the midpoint of AB, we can draw a line segment connecting M and N that is parallel to OB and AE and perpendicular to AB.
the Pythagorean theorem
[tex]OE² = OX² + XE²OE²[/tex]
[tex](a + b/2)² + (2a - b/√3)²OE² = 7a²/4 + 3ab/2 + b²/4AN²[/tex]
[tex]AE² + EN²AN² = (2a√3)² + (b/2)²AN²[/tex]
[tex]12a² + b²/4MN² = AN² + AM²MN² \\\\ 12a² + b²/4 + (7a²/4 + 3ab/2 + b²/4)MN²\\\\19a²/2 + 3ab/2 + b²/2MN = √(19a²/2 + 3ab/2 + b²/2)[/tex]
So, the length of MN is expressed in terms of a and b.
To know more about Pythagorean theorem visit:
brainly.com/question/14930619
#SPJ1
Soccer ball specifications require a diameter of 8.65 inches with an allowable margin of error of 0.05 inch.
Use this information to complete these statements.
The equation that can be used to find d, the diameter of a new soccer ball, is
| ____ | = ____
The minimum possible diameter of a soccer ball is ____,
and the maximum possible diameter is ____
The equation that can be used to find d, the diameter of a new soccer ball, is: |d - 8.65| = 0.05
What is diameter ?
Diameter is the distance across a circle passing through its center, and it is defined as the length of a straight line passing through the center of a circle and connecting two points on the circumference of the circle. In the case of a soccer ball, the diameter is the distance between two opposite points on the surface of the ball, passing through its center.
Radius is a term used in geometry to refer to the distance from the center of a circle to any point on its circumference. It is defined as half of the diameter of a circle. In the case of a soccer ball, the radius is the distance from the center of the ball to its surface. The radius is related to the diameter by the formula:
radius = diameter / 2
The minimum possible diameter of a soccer ball is:
d = 8.65 - 0.05 = 8.60 inches
The maximum possible diameter is:
d = 8.65 + 0.05 = 8.70 inches
To know more about measurement visit :-
https://brainly.com/question/27233632
#SPJ1
If the GM between √2 and 2√2 is a find the value of a.
Answer:
If the GM between √2 and 2√2 is a find the value of a.
Step-by-step explanation:
To find the geometric mean between two numbers, we simply take the square root of their product.
In this case, we want to find the geometric mean between √2 and 2√2.
Their product is:
√2 * 2√2 = 2√4 = 2*2 = 4
So, the geometric mean between √2 and 2√2 is the square root of 4, which is:
√4 = 2
Therefore, the value of a is 2.
5. Solve the following problems. Note: In those problems the geometric multiplicity is less than algebraic multiplicity. (a)d/ dx = ( 1 −44 −7) x2−30
Answer:
-130
Step-by-step explanation:
please help i have been trying to get an answer for 5+ hours
How is the quotient of 556 and 16 determined using an area model?
Enter your answers in the boxes to complete the equations. Your final answer should be a mixed number in simplest form.
Answer:
To use an area model to determine the quotient of 556 and 16, we can divide a rectangle of area 556 into 16 equal parts. Each part will have an area of 556/16.
We can start by dividing 556 into 16 groups of 10 (160), and then into 16 groups of 3 (48). That leaves us with a remainder of 4.
So we have:
556 = 16 x 34 + 48 + 4
This shows that 556 can be written as 16 times some whole number (34) plus a remainder of 48 + 4/16.
Simplifying the remainder, we have:
48 + 4/16 = 48 + 1/4 = 48.25
Therefore, the quotient of 556 and 16 is:
556/16 = 34 1/4
The quotient of 556 and 16 using an area model can be determined by producing a rectangle with the total area of 556 and one side of 16. The length of the other side will be the quotient. In this case, the quotient is 34 3/4.
Explanation:When asked to determine the quotient of 556 and 16 using the area model, one way to think of this is making a rectangle. The total area is 556 and one side is 16. The length of the other side will be the quotient.
Start by first estimating how many times 16 could fit into 556. Let's take 30 as an estimate, because 30*16 = 480, which is relatively close to 556. Draw a rectangle with the width of 16 and the length of 30.
Find the difference between the rectangle's area and 556. So, 556 - 480 = 76. Now, 76 is our remaining area to fill. 16 goes into 76 four more times, adding up to 64.
There is still a leftover area, which is 76-64 = 12. This is smaller than our width of 16. So, your final answer is 34 12/16 or 34 3/4 in simplest form.
Learn more about Area Model here:https://brainly.com/question/18472914
#SPJ2
for h(x) = 4x-1, find h(0) and h(2)
Answer:
- 1 and 7
Step-by-step explanation:
to find h(0) substitute x = 0 into h(x)
h(0) = 4(0) - 1 = 0 - 1 = - 1
to find h2) substitute x = 2 into h(x)
h(2) = 4(2) - 1 = 8 - 1 = 7
If P = 2y² + 4xy + 4
Q = − 3y² + 7 - 3xy
R=- 3xy + 8
Find P+Q=R.
Answer:
P = [tex]2y^{2}[/tex] + 4xy +4
Q = [tex]-3y^{2}[/tex] + 7 -3xy
R = -3xy +8
Step-by-step explanation:
This is a modification of A7 - Quadratic Approximation. Create a Matlab function called myta which takes four arguments in the form myta(f,n,a,b). Heref is a function handle, n is a nonnegative integer, and a and b are real numbers. The Matlab function should find the nth Taylor Polynomial to f(x) at x = a and plug in x = b, then it should return the absolute value of the difference between this value and f(b). The the nth Taylor Polynomial to f (x) is the function g(x) = f(a) + f'(a)(x – a) += f'(a)(x – a)? + 1 1 f''(a)(x – a)3 + + f(n)(a)(x – a)". 1 3! n! 3 Here are some samples of input and output for you to test your code. When you submit your code the inputs will be different. Here vpa is being used to show lots of digits
As we have defined the Matlab function called myta which takes four arguments in the form myta(f,n,a,b).
The purpose of the function is to find the nth Taylor polynomial of the function f(x) at x = a and evaluate it at x = b. Then, it should return the absolute value of the difference between this value and f(b).
Now that we have the nth Taylor polynomial of f(x) at x = a, we can evaluate it at x = b and calculate the absolute difference between this value and f(b).
function result = myta(f,n,a,b)
syms x; % define x as symbolic variable
g = f(a); % initialize g as f(a)
for i=1:n % iterate from 1 to n
deriv = diff(f,x,i-1); % calculate the ith derivative of f
term = deriv*(x-a)^(i-1)/factorial(i-1); % calculate the ith term of the Taylor series
g = g + term; % add the ith term to g
end
result = abs(g - f(b)); % calculate the absolute difference between g(b) and f(b)
end
This code calculates the absolute difference between g(b) and f(b) using the "abs" function and assigns it to the output variable "result".
To know more about function here
https://brainly.com/question/28193995
#SPJ4
what is 4547.14 in standard form
Answer:
4.54714 × 103
Step-by-step explanation:
consider using a z test to test h0: p 5 .6. determine the p-value in each of the following situations. a. ha:p..6,z51.47 b. ha:p,.6,z522.70 c. ha:p?.6,z522.70 d. ha:p,.6,z5.25
a) P-value = P(z<1.47) = 0.9292.
b) P-value = P(z>2.70) = 0.0036.
c) P-value = 2 × P(z>2.70) = 0.0072.
d) P-value = P(z>2.5) = 0.0062.
Z-test is a statistical test for the null hypothesis, which refers to the population mean, where the population standard deviation is known. P-value represents the probability value for any hypothesis, where a small p-value indicates that the null hypothesis is less accurate.
P-value, for the given values of z-test is calculated as follows: a) For ha: p < .6, z=1.47The p-value for this hypothesis test is calculated as follows: P-value = P(z<1.47) = 0.9292. Therefore, the P-value is 0.9292. b) For ha: p > .6, z=2.70The p-value for this hypothesis test is calculated as follows.
P-value = P(z>2.70) = 0.0036. Therefore, the P-value is 0.0036.c) For ha: p ≠ .6, z=2.70The p-value for this hypothesis test is calculated as follows: P-value = 2 × P(z>2.70) = 0.0072.
Therefore, the P-value is 0.0072.d) For ha: p > .6, z=2.5The p-value for this hypothesis test is calculated as follows: P-value = P(z>2.5) = 0.0062. Therefore, the P-value is 0.0062.
Learn more about Z Test
brainly.com/question/15683598
#SPJ11
Michelle asked 30 people entering a movie theater how many movies they had seen over the past year. Here are the results of her poll. 0, 5, 3, 2, 6, 8, 10, 12, 11, 16, 0, 3, 4, 7, 2, 0, 1, 9, 6, 4, 4, 8, 14, 16, 17, 18, 5, 3, 6, 8 (a) Create a frequency table for the data with 5 classes. (b) Create a histogram from your frequency table. Label the axes and give the histogram a title. Answer: (c) Number of movies Frequency
Part (a) of this sentence displays the frequency chart, and part (c) displays the histogram (b) .
what is histogram ?A graph that displays the distribution of a collection of continuous data is called a histogram. It is composed of a number of bars, each of which represents a set of values, and whose height denotes the frequency or number of data points that lie within a given range. Histograms are used to depict a distribution's shape, centre, and spread graphically. They are frequently used to find patterns and trends in data in areas like statistics, data analysis, and scientific study.
given
(A) We must first identify the data's range before dividing it into 5 intervals of equal width in order to construct a frequency table with 5 classes. The values are in the range of 0 to 18.
(b) We plot the class intervals on the x-axis and the frequency on the y-axis to generate a histogram from the frequency chart. The counts are used to illustrate how frequently each class interval occurs.
Part (a) of this sentence displays the frequency chart, and part (c) displays the histogram (b).
To know more about histogram visit :-
https://brainly.com/question/16819077
#SPJ1
if a data set is symmetrical, which statistical measure best represents the entire spread of the data set?
The best statistical measure to represent the entire spread of the data set when a data set is symmetrical is the standard deviation.
The standard deviation is a measure of how much the individual data points vary from the mean of the data set.
It is calculated by taking the square root of the variance.
It is the average of the squared differences of each data point from the mean.
In a symmetrical data set, the mean, median, and mode are all equal and located at the center of the data set.
This represents that the data points are evenly distributed around the center.
The standard deviation can provide a good measure of the spread of the data points from this center.
Other measures of spread representing the range or interquartile range, may not be as useful in a symmetrical data set .
As they are more affected by outliers and skewness in the data.
Therefore, the symmetrical data set in best way represented by statistical measure known as standard deviation.
Learn more about data set here
brainly.com/question/16159794
#SPJ4
listed are 29 ages for academy award winning best actors in order from smallest to largest. 18; 21; 22; 25; 26; 27; 29; 30; 31; 33; 36; 37; 41; 42; 47; 52; 55; 57; 58; 62; 64; 67; 69; 71; 72; 73; 74; 76; 77 a. (5pts) find the score at the 20th percentile
The score at the 20th percentile is 27.
To find the score at the 20th percentile of the 29 ages for Academy Award winning best actors, follow the steps below:
Arrange the given ages from smallest to largest.
18; 21; 22; 25; 26; 27; 29; 30; 31; 33; 36; 37; 41; 42; 47; 52; 55; 57; 58; 62; 64; 67; 69; 71; 72; 73; 74; 76; 77
Determine the total number of data points
n = 29
Find the rank of the percentile
20th percentile = (20/100) * 29 = 5.8 = 6 (rounded to the nearest whole number).The rank of the percentile is 6.
Use the rank to determine the corresponding data value. The corresponding data value is the value at the 6th position when the data is arranged in ascending order. The score at the 20th percentile is 27.
To learn more about score at percentile refer :
https://brainly.com/question/14444761
#SPJ11
1) y = |x+2| how do i make a table and graph this solution! someone help!!
Answer:
(-1,1)
(0,2
(1,3)
(2,4)
a chess club with 80 memberd is electing a new presidentm jose received 52 votes. what percentage of the club members voted for Jose?
Answer:
Step-by-step explanation:
(52 divided by 80) multiplied by 100
that will give you the answer
In an introductory psychology class with n = 50 students, there are 9 freshman males, 15 freshman females, 8 sophomore males, 12 sophomore females, and 6 junior females. A random sample of n = 2 students is selected from the class. If the first student in the sample is a male, what is the probability that the second student will also be a male?
a. 8/14
b. 12/20
c. 20/44
d. 20/50
Answer: Total number of males= C
Step-by-step explanation:
I need help I need to show my work please help
Answer: 19
Step-by-step explanation:
This is an isosceles trapezoid. Note that because this is an isosceles trapezoid, QN and MP are equal. Use the lengths given and solve:
3x + 1 + 6 = 6x - 5
3x = 12
x = 4
Plug x = 4 in 3x + 1 + 6, and we get 3(4) + 1 + 6 = 12 + 7 = 19
Hope this helps!
a bin can hold 28 pounds. each toy car weighs 7 ounces. how many toy cars can the bin hold? (2 points) 64 toy cars 72 toy cars 88 toy cars 92 toy cars
A bin can hold 28 pounds. each toy car weighs 7 ounces., so the bin can hold 64 toy cars.
How to determine the number of toy carsTo determine the number of toy cars the bin can hold, we must first convert the weight limit of the bin and the weight of the toy cars to a uniform unit of measure.
We'll then divide the weight limit of the bin by the weight of one toy car. After that, we'll multiply the resulting value by the number of ounces in one pound (16).
Here's how to solve the problem:
1 pound = 16 ounces
Therefore, a bin that can hold 28 pounds can hold:28 × 16 = 448 Ounces
The weight of one toy car is 7 ounces.
Divide the weight limit of the bin (448 ounces) by the weight of one toy car (7 ounces):
448 ÷ 7 = 64
Therefore, the bin can hold 64 toy cars.
Learn more about weight limit at
https://brainly.com/question/14375094
#SPJ11
Pls help me I will make u brainest
How many different numbers can be obtained from multiplying 2 distinct integer divisors of 10?
3
4
5
6
7
8
9
We can obtain 6 different numbers by multiplying 2 distinct integer divisors of 10.
How many different numbers can be obtained from multiplying 2 distinct integer divisors of 10?The divisors of 10 are 1, 2, 5, and 10.
To determine how many different numbers can be obtained from multiplying 2 distinct integer divisors.
We need to select 2 distinct divisors and find their product.
The possible pairs are:
1 and 2, product = 21 and 5, product = 51 and 10, product = 102 and 5, product = 102 and 10, product = 205 and 10, product = 50Therefoore, we can obtain 6 different numbers.
Learn more about divisors here: https://brainly.com/question/30144788
#SPJ1
I really need help on this question!
Answer:
The 2nd table
Step-by-step explanation:
For the first set of x and y values, divide y (9/4) by x(3)
Change 3 to 1/3 due to the keep-change-flip rule and multiply that by 9/4 as 9/4 × 1/3= 9/12 which is equivalent to 3/4
Do the same process with 6 and 9/2 and that should give you 3/4 as well
Therefore the second table of values have a proportional relationship to each other as they have the same quotient.
Hope this helps.
M/S Sing Trader purchased refrigerator for Rs.10,000 taxable amount. They sold it to
Amrutbhai for Rs. 12,000 taxable amount. The rate of GST is 28%, then find the CGST
and SGST to be paid by M/S Sing Trader
The CGST and SGST that M/S Sing Trader must pay as the GST rate is 28% is Rs. 280 CGST and Rs. 280 SGST.
Given that,
M/S Sing Trader spent Rs. 10,000 in taxable revenue for a refrigerator. For a taxable amount of Rs. 12,000, they sold it to Amrutbhai.
We have to find the CGST and SGST that M/S Sing Trader must pay as the GST rate is 28%.
We know that,
Input tax = 10000 × 28%
Output tax = 12000 × 28%
GST payable = 12000 × 28% - 10000 × 28%
GST payable = 28% (12000-10000)
GST payable = 28% (2000)
GST payable = [tex]\frac{28}{100}[/tex](2000)
GST payable = 28×20
GST payable = 560
CGST = SGST = [tex]\frac{GST}{2}[/tex] = [tex]\frac{560}{2}[/tex] = Rs. 280
Therefore, The CGST and SGST that M/S Sing Trader must pay as the GST rate is 28% is Rs. 280 CGST and Rs. 280 SGST.
To know more, visit:
https://brainly.com/question/20038104
https://brainly.com/question/16613199
growth models like those used in forecastx usually model situations well where a process grows multiple choice a. until reaching saturation. b. at a more or less constant rate. c. at an exponential rate. d. in a linear fashion.
Growth models like those used in ForecastX usually model situations well where a process grows at an exponential rate. Which is (C).
What is ForecastX?
ForecastX is forecasting software that is used for business purposes. It is simple to use and allows you to forecast your sales, income, or other metrics. ForecastX allows you to create accurate and reliable forecasts using automated time series analysis, a method of forecasting that incorporates historical data to make predictions about the future.
The speed or frequency of something is referred to as the rate. A rate is a ratio that compares two values in different units. The term "rate" is used to describe any ratio that specifies how one quantity varies with respect to another quantity.
Growth models like those used in ForecastX usually model situations well where a process grows at an exponential rate.
To know more about ForecastX: https://brainly.com/question/30900556?source=archive
#SPJ11
I cant figure it out
4x - 4/4x² + x is the value of linear equation.
What in mathematics is a linear equation?
A linear equation is an algebraic equation of the form y=mx+b, where m is the slope and b is the y-intercept, and only a constant and a first-order (linear) term are included. The variables in the previous sentence, y and x, are referred to as a "linear equation with two variables" at times.
Equations with power 1 variables are known as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.
28x³ - 28x²/28x⁴ + 7x³
= 28x²( x - 1 )/7x³( 4x + 1)
= 4( x - 1)/x( 4x + 1)
= 4x - 4/4x² + x
Learn more about linear equation
brainly.com/question/11897796
#SPJ1
ABCD is a quadrilateral A) Calculate the value of x. B) When ABCD is drawn to scale, would the lines AD and BC be parallel or not? You must justify your answer without using a scale drawing
A) The value of x = 45 degrees
B) Lines AD and BC are not parallel when ABCD is drawn to scale.
To solve this problem, we can use the fact that the sum of the angles in a quadrilateral is 360 degrees.
A) angle A + angle B + angle C + angle D = 360
2x + 90 + x + 3x = 360
6x + 90 = 360
6x = 270
x = 45
Therefore, x = 45 degrees.
B) To determine if lines AD and BC are parallel, we can look at the opposite angles of the quadrilateral. If they are supplementary (add up to 180 degrees), then the lines are parallel.
angle A + angle C = 2x + x = 3x = 135 degrees
angle B + angle D = 90 + 3x = 90 + 135 = 225 degrees
Since angle A + angle C and angle B + angle D do not add up to 180 degrees, the opposite angles are not supplementary, and therefore, lines AD and BC are not parallel.
Learn more about quadrilateral here
brainly.com/question/9550663
#SPJ4
The given question is incomplete, the complete question is:
ABCD is a quadrilateral A) Calculate the value of x. B) When ABCD is drawn to scale, would the lines AD and BC be parallel or not?
How do you integrate a problem numerically?
Numerical integration involves approximating the definite integral of a function using numerical methods.
There are various techniques for numerical integration, including the Trapezoidal rule, Simpson's rule, and Gaussian quadrature.In general, these methods divide the integration interval into smaller sub-intervals and approximate the area under the curve within each sub-interval using mathematical formulas.
The approximations are then summed up to estimate the integral over the entire interval.The accuracy of the numerical integration depends on the number of sub-intervals used and the specific method used. Generally, increasing the number of sub-intervals leads to a more accurate approximation.
Overall, numerical integration is a useful tool for evaluating integrals that cannot be solved analytically and is commonly used in various fields such as physics, engineering, and finance.
For more questions like Integration click the link below:
https://brainly.com/question/30900582
#SPJ11
(4) 2. Determine the exact answer for each of the calculations in question 2.1 above, by working out the errors caused by rounding, and compensating for them. 2.2.1. 723 + 586 2.2.2. 2850-1155
Helppp pls due today
[tex]\frac{x}{360} *\pi r^2[/tex] is the formula for area of sectors
x=120
r=2
substitute the values
[tex]\frac{120}{360} *\pi *(2)^2= 4.2 to 1dp[/tex]
If the midpoint of 2 sides of a triangle are connected with a segment then
The Midpoint is the middle- point of the line member. The midpoint connecting two sides of a triangle is resemblant to the third side and half as long.
The midpoint is the middle of the line member. It's equidistant from both endpoints and is the centroid of the member and endpoints. Cut a member in two.
The midpoint theorem states that a line member drawn from the midpoint of two sides of a triangle is resemblant to the third side and half the length of the third side of the triangle.
The mean theorem helps us find the missing values for the sides of triangles. Connects the sides of a triangle with a line member drawn from the midpoints of two sides of the triangle.
To know more about Mid-point,
brainly.com/question/28443113
#SPJ4
a business give 30% discount on everyting. If a radio costed 1610 Dollars how much did it cost before discount
Can someone help with the calculation of this.
Answer:
$2300
Step-by-step explanation:
$1610 is 7/10 the original cost. Multiplying by 10/7 reverses that, and we get the starting cost of $2300
Hope this helps!
