Answer:
CCl4 can neither form H-bonds with water molecules nor can it break H-bonds in water molecules. Therefore, it is insoluble in water. Ethanol is a polar compound and can form H-bonds with water, which is a polar solvent. Therefore,it is miscible with water in all proportions
Explanation:
FIRSTLY WATER MOLECULES CONTAIN ONE OXYGEN AND TWO HYDROGEN(H2O) .HENCE IN THIS STRUCTURE THE BOND BETWEEN OXYGEN AND HYDROGEN IS COVALENT AND POLARIZABLE .HENCE OXYGEN ATOM ATTRACTS ELECTRONS MORE STRONGLY TOWARDS INWARDS AS COMPARE TO 2 HYDROGEN ATOMS. DUE TO WHICH OXYGEN ATOM GET SLIGHTLY NEGATIVE CHARGE AND 2 HYDROGEN OCCUPY SLIGHTLY POSITIVE CHARGE THAT MAKE WATER A POLAR MOLECULE. :NOW IN ETHANOL(CH3CH2OH),ETHANOL MOLECULE IS FORMED BY 2 CARBON ATOM JOINED BY SINGLE BOND WHICH IS NOT POLAR.IN β CARBON OF ETANOL CARBON IS BONDED TO 3 HYDROGEN ATOMS WHICH MAKES IT NON POLAR DUE TO SYMMETRY BUT α CARBON HAS 2 HYDROGEN AND 1 OH- ION (SAME AS IN THE CASE OF WATER MOLECULE) SO THIS CARBON ATOM BECAMES POLAR AND HENCE ETHANOL MOLECULES BECAMES POLAR. NOW WE KNOW THAT SAME CHARGE REPEL EACH OTHER AND UNLIKE CHARGES ATTRACTS EACH OTHER SO THE SLIGHTHLY POSITIVE CHARGE OF WATER MOLECULE MAKES A BOND WITH THE.
When H2S(g) reacts with O2(g) to form H2O(g) and SO2(g), 124 kcal of energy are evolved for each mole of H2S(g) that reacts. Write a balanced equation for the reaction with an energy term in kcal as part of the equation.
Answer:
2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal
Explanation:
The reaction of the problem occurs as follows:
H2S(g) + O2(g) → H2O(g) + SO2(g)
To balance the reaction we must balance oxygens:
H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)
To balance the complete reaction:
2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)
As the energy is evolved, 124kcal are as product in the reactio per mole of H2S. As the balanced reaction contains 2 moles of H2S, the heat evolved is:
124kcal*2 = 248kcal:
2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g) + 248kcal
And this is the balanced equation
Jax designs an experiment to determine how the amount of sodium chloride affects the boiling point of water. He adds 1 g, 5 g, and 10 g of sodium chloride to three different beakers, each containing 100 mL of water. There is a fourth beaker that contains 100 mL water without any sodium chloride. He heats each of the samples on a Bunsen burner and measures the boiling point with the same thermometer. Which of the following is/are the control(s) in the experiment? (Choose all that apply)
Answer:
Amount of water
The thermometer
Explanation
In an experiment, there is always a dependent variable and an independent variable. The independent variable is manipulated and its effect on the dependent variable is observed.
The control is that factor in the experiment that must remain constant so that effect of the independent variable on the dependent variable can be observed.
In this case, the independent variable is the amount of sodium chloride while the dependent variable is the temperature at which the solution boils.
The controls must be the amount of water which must be held constant and the same thermometer used to measure the temperature so that the effect of the amount of sodium chloride on the temperature of the solution can be studied.
The following are the controls in the experiment:
The beaker with 100 mL of water without any sodium chloride.
The temperature of the Bunsen burner.
The type of thermometer used.
The control(s) in the experiment are the beaker with 100 mL of water without any sodium chloride. This beaker is used to compare the boiling points of the other beakers, which have different amounts of sodium chloride added.
The control beaker ensures that any differences in boiling point are due to the amount of sodium chloride added, and not to other factors, such as the temperature of the Bunsen burner or the type of thermometer used.
The other factors that could affect the boiling point of water, such as the humidity of the air or the altitude, are kept constant in the experiment.
To learn more about experiment, follow the link:
https://brainly.com/question/15088897
#SPJ3
Guide Questions:
1. How do you compare the distance travelled by the object
when you pushed it with a weak/gentle, strong and
strongest?
Refle
2. Which amount of force applied made the materials travelled
the farthest from the starting point. Nearest the starting
point?
3. What factors do you think affected the movement of the
materials?
Answer:
Kindly check explanation
Explanation:
The force applied is directly proportional to the distance moved by an object, the larger the applied force, the greater the distance moved.
a = f/m
a = acceleration ; f = applied force ; m = mass
From the relation, we can see that acceleration is directly proportional to force applied.
The ball will travel farthest with the greatest applied force while, nearest distance will be attained with the smallest applied force.
The distance covered is affected by both the mass of the object and the applied force
What is the pH of a solution with a 7.8 × 10−13 M hydronium ion concentration?
A) 1.9
B) 2.8
C) 11
D) 12
Answer:
12Explanation:
The pH of a solution can be found by using the formula
[tex]pH = - log [ { H_3O}^{+}][/tex]
From the question we have
[tex]ph = - log(7.8 \times {10}^{ - 13} ) \\ = 12.1079...[/tex]
We have the final answer as
12Hope this helps you
The pH of this solution with a 7.8 × 10⁻¹³ M concentration of hydronium ion is equal to: D. 12.
Given the following data:
Concentration of hydronium ion = 7.8 × 10⁻¹³ M.
What is pH?pH is literally the power of hydrogen ions and it can be defined as a measure of the molar concentration of hydrogen ions in a given solution.
How to calculate the pH of a solution?We would determine the pH of this solution by using this formula;
pH = -log[H⁺]
pH = -log(7.8 × 10⁻¹³).
pH = -(-12.1)
pH = 12.1 ≈ 12.
Read more on pH here: brainly.com/question/24233266
#SJP2
Which of the following colors has the highest energy? O A. Red O B. Green O C. Blue O D. Yellow
Answer:
C. BlueExplanation:
This is because, Blue color highest frequency of energy after Violet and Indigo.
Help for both questions please and thanks
Answer:
hey can you re post this and zoom in i can see what it say its not allowing me to zoom thx
Explanation:
According to the law of conservation of matter, what cannot change during a chemical reaction?.
Answer:The law of conservation of mass states that in a chemical reaction mass is neither created nor destroyed. ... The carbon atom changes from a solid structure to a gas but its mass does not change. Similarly, the law of conservation of energy states that the amount of energy is neither created nor destroyed.
Explanation:
Write any two drawbacks of the octet theory.
Answer:
Octet rule fails to explain the following:
(1) The stability of incomplete octet molecules, i.e., the molecules with the central atom containing less than eight electrons. (2) The stability of expanded octet molecules, i.e., the molecules with the central atom containing more than eight electrons.
A TLC plate showed 2 spots with Rf values of 0.25 and 0.26. The plate was removed from the developing chamber, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber. What would you expect to see after the second development was complete
Answer:
See explanation
Explanation:
TLC is a chromatographic method in which the solute is spotted on a plate and the plate is placed in an air tight chamber containing a solvent. The solvent is maintained below the level of the spot. The capillary movement of the solvent through the plate achieves the required separation.
If two spots have Rf values of 0.25 and 0.26 respectively and then the plate was removed from the developing chamber, subsequently, the residual solvent was allowed to evaporate from the plate, and then the plate was returned to the developing chamber.
It will be observed after the second development is complete that the new Rf values will be 0.50 and 0.52 respectively. It will just be as though the second chromatogram picked up from where the first chromatogram stopped.
To determine the enthalpy and entropy of dissolving a compound, you need to measure the Ksp at multiple _______. Then, plot ln(Ksp) vs. ______. The slope of the plotted line relates to the _______ of dissolving and the intercept of the plotted line relates to the ______ of dissolving.
Answer:
To determine the enthalpy and entropy of dissolving a compound, you need to measure the Ksp at multiple temperatures. Then, plot ln(Ksp) vs. 1/T. The slope of the plotted line relates to the enthalpy (ΔH) of dissolving and the intercept of the plotted line relates to the entropy (ΔS) of dissolving.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us use the thermodynamic definition of the Gibbs free energy and its relationship with Ksp as follows:
[tex]\Delta G=-RTln(Ksp)\\\\\Delta G=\Delta H-T\Delta S[/tex]
Thus, by combining them, we obtain:
[tex]-RTln(Ksp)=\Delta H-T\Delta S\\\\ln(Ksp)=-\frac{\Delta H}{RT} +\frac{T\Delta S}{RT} \\\\ln(Ksp)=-\frac{\Delta H}{RT} +\frac{\Delta S}{R}[/tex]
Which is related to the general line equation:
[tex]y=mx+b[/tex]
Whereas:
[tex]y=ln(Ksp)\\\\m=-\frac{\Delta H}{R} \\\\x=\frac{1}{T} \\\\b=\frac{\Delta S}{R}[/tex]
It means that we answer to the blanks as follows:
To determine the enthalpy and entropy of dissolving a compound, you need to measure the Ksp at multiple temperatures. Then, plot ln(Ksp) vs. 1/T. The slope of the plotted line relates to the enthalpy (ΔH) of dissolving and the intercept of the plotted line relates to the entropy (ΔS) of dissolving.
Regards!
After mixing the solutions in a separatory funnel, the stopper should be ______ and the liquid should be _______ and the layers allowed to separate. When you get close to the interface between the layers, ______ the funnel and turn over _______ heat up until the first layer is collected get eye level with to collect the second layer. _______
Answer:
Hence,
1) removed
2) drained through the stopcock
3) get eye level with
4) slow the draining
5) switch to a new flask
Explanation:
After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be drained through the stopcock, and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and turn over to slow the draining heat up until the first layer is collected. Switch to a new flask get eye level with it to collect the second layer.
g The most stable nucleon in terms of binding energy per nucleon is 56Fe. If the atomic mass of Fe-56 is 55.9349 amu, calculate the binding energy in J/nucleon and in Mev/nucleon for Fe-56. The atomic mass of a proton is 1.00782 amu and the atomic mass of a neutron is 1.00866 amu. Would the binding energy per nucleon for U-235 be larger or smaller than that of Fe-56
Answer:
The binding energy per nucleon of U-235 is lesser than that Fe-56
Explanation:
The binding energy refers to the energy required to hold the nucleons together in the nucleus of an atom.
It also corresponds to the energy that must be supplied in order to disintegrate the nucleus of an atom.
The binding energy per nucleon of elements depends on the number of nucleons present in the nucleus of the atom of that element. It is defined as the binding energy of the nucleus divided by the number of nucleons.
U-235 contains more nucleons than Fe-56, the binding energy per nucleon of U-235 is less than that of Fe-56. This is further confirmed by the fact that the greater the number of protons in the nucleus, the greater the coulumbic repulsion in the nucleus and the lesser the nuclear force of attraction between nucleons.
What mass of hydrochloric acid that reacted with zinc will produced 0.15dm3 of hydrogen at st.p? Equation for this reaction:
Zn + 2HCl ------> ZnCl2 + H2
Answer:
[tex]{ \tt{22.4 \: dm {}^{3} \: contains \: 1 \: mole \: of \: hydrogen }} \\ { \tt{0.15 \: {dm}^{3} \: will \: contain \: ( \frac{0.15}{22.4} \times 1) \: moles }} \\ = 0.0067 \: moles \\ { \bf{mole \: ratio = 1 :1 }} \\ { \tt{1 \: mole \: weighs \: 65.38 \: g}} \\ { \tt{0.0067 \: moles \: weighs \: (0.0067 \times 65.38) \: g}} \\ = 0.44 \: g[/tex]
Which of the following is true for a nuclear reaction? (5 points)
Select one:
a.Electrons are lost.
b.Electrons are gained.
c.The identity of element changes.
d.The identity of element remains same.
the identity of element remains same
Solids that have particles arranged in a regular, repeating patterns are known as crystalline solids.
True or False
Answer: The answer is false
Explanation:
they are arranged in a structure
called a crystalline.
Which of the following is an example of a nonrenewable resource?
a
cattle
b
uranium
c
cotton
d
trees
Answer:
b . uranium, It is not a renewable resource.
Stomach acid is approximately 0.10 M HCl. How many mL of stomach acid can be neutralized by one regular antacid tablet that contains 500 mg of solid CaCO3 (100.09 g/mol)?
Answer:
100 mL
Explanation:
The reaction that takes place is:
CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂First we convert 500 mg of CaCO₃ into mmoles, using its molar mass:
500 mg ÷ 100 mg/mmol = 5 mmol CaCO₃Then we convert 5 mmoles of CaCO₃ into HCl mmoles, using the stoichiometric coefficients of the balanced reaction:
5 mmol CaCO₃ * [tex]\frac{2mmolHCl}{1mmolCaCO_3}[/tex] = 10 mmol HClFinally we calculate the volume of a 0.10 M HCl solution (such as stomach acid) that would contain 10 mmoles:
10 mmol / 0.10 M = 100 mLAccording to the equation 2K(s) + CI2(g) 2kCI(s), potassium reacts with chlorine to form potassium chlorine. If 100 atoms of potassium react with chlorine gas, how many chlorine molecules will be needed to completely react?
Answer:
50 CI₂ molecules
Explanation:
2K(s) + CI₂(g) → 2KCI(s)By looking at the stoichiometric coefficients, we can tell that if 2 atoms of potassium (K) react with chlorine gas (CI₂), 1 chlorine molecule would react.
With that in mind we can calculate how many CI₂ molecules would react with 100 K atoms:
100 atoms K *[tex]\frac{1Cl_2Molecule}{2KAtom}[/tex] = 50 CI₂ moleculesGC-mass spectrometry is used to find the ________ of each compound in a ________. Group of answer choices none of these molecular formula, mixture of compounds molecular weight, mixture of compounds B and C molecular formula, mixture of alkanes
Answer:
mixture of compounds molecular weight
Explanation:
Gas Chromatography-mass spectrometry is used to find the mixture of compounds of each compound in a molecular weight. The Gas Chromatography also known as Mass Spectrometry (GC/MS) is an instrument that is used to separate chemical mixtures and identifies the components at a molecular level. It is one of the most accurate tools used for analyzing samples of the environment.
convert 12nanometer to centimeter
Answer:
1x10^-6
Explanation:
Sodium fluoroacetate (NaO₂C₂H₂F) is a common poison used in New Zealand to control invasive species, such as rats. It can be prepared by the substitution of a C-Cl bond in sodium chloroacetate (NaO₂C₂H₂Cl) for a C-F bond. What is the approximate enthalpy change for this substitution reaction on a 1.500 mole sample, based on the following bond energies?
C-Cl = 339.0 kJ/mol
C-F = 485.0 kJ/mol
Answer:
-219
Explanation:
1.5(339) - 1.5(485) = -219
The approximate enthalpy change for this substitution reaction is -219 kJ.
In the case of this substitution reaction, we need to find the enthalpy change when NaO₂C₂H₂Cl is converted to NaO₂C₂H₂F.
This reaction involves the breaking of the C-Cl bond and the formation of the C-F bond.
We have to subtract the bond energy of the C-F bond from that of the C-Cl bond and multiply by the number of moles involved.
So we will have;
ΔH= 1.500 mole [339.0 kJ/mol - 485.0 kJ/mol]
ΔH= -219 kJ
Learn more: https://brainly.com/question/1301642
What is the pH of a 1.0 x103 M KOH solution?
A. 11
B. 4.0
C. 10
D. 3.0
Answer:
Option A. 11
Explanation:
We'll begin by calculating the concentration of Hydroxide ion in the solution. This can be obtained as follow:
KOH (aq) —> K⁺(aq) + OH¯(aq)
From the balanced equation above,
1 mole of KOH produced 1 mole of OH¯.
Therefore, 1×10¯³ M KOH will also produce 1×10¯³ M OH¯.
Next, we shall determine the pOH of the solution. This can be obtained as follow:
Concentration of Hydroxide ion [OH¯] = 1×10¯³ M
pOH =?
pOH = –Log [OH¯]
pOH = –Log 1×10¯³
pOH = 3
Finally, we shall determine the pH of the solution. This can be obtained as follow:
pOH = 3
pH =?
pH + pOH = 14
pH + 3 = 14
Collect like terms
pH = 14 – 3
pH = 11
Therefore, the pH of the solution is 11
Select the statement(s) that describe the characteristics of transition metals. a. Transition metals have partially filled d subshells. b. Transition metals give rise to cations that have completely filled d subshells. c. Group 2B elements are not transition metals because they neither have nor readily acquire partially filled d orbitals.
Answer: The correct option is A,
--> a.) Transition metals have partially filled d subshells.
Explanation:
Transition elements are all metals of economic importance. They are found in the d- lock of the periodic table between group 2 and 3. They occupy three rows, with ten elements in each row. The term 'transition metals' refers only to an element which has PARTIALLY filled d orbitals. Typical example of transition metals include iron (Fe).
They have partially filled 3d orbitals which are responsible for the special properties of the metals. These include:
--> Physical properties: the transition metals have high boiling and melting points. They are hard, dense and lustrous. They are also good conductors of heat and electricity.
--> Chemical reactivity: In the s- block and p-block, the chemical properties of the elements in the same period vary, often quite markedly, from left to right. This does not happen with the transition metals because electrons are added progressively to the inner d-orbitals.
--> Variable oxidation states: they have variable oxidation states because 3d electrons are available for bond formation.
Select the keyword or phrase that will best complete each sentence about the three general rules of for drawing Lewis structures.a. main group b. hafnium c. valence d. hydrogen e. core f. transition metal1. Draw only__the electrons. 2. Give every___element (except hydrogen) an octet of electrons. 3. Give each____two electrons.
Answer:
1. Draw only the valence electrons.
2. Give every element main group element (except hydrogen) an octet of electrons.
3. Give each hydrogen two electrons.
Explanation:
Lewis structures are used to describe the arrangement or configurations of the valence electrons of molecules and polyatomic ions involved in electronic bonding. A Lewis structure consists of the symbols of the elements in the molecule surrounded by dots with each dot representing each of the elements valence electrons. Also, the electrons shared between two elements are shown by dots between the two elements and these electrons are known as shared electron pairs. The valence electrons on atom that is not involved in bonding is known as lone pairs.
The three general rules for drawing Lewis structures are:
1. Draw only the valence electrons. Only the valence electrons of the atoms of elements are shown since they are the only electrons involved in chemical bonding.
2. Give every element main group element (except hydrogen) an octet of electrons. The complete eight valence electrons of the noble gases is associated with their stability. Thus, the main group elements show a tendency to form enough bonds to obtain eight valence electronsmin order to achieve stability. This is known as the octet rule. However, since the maximum number of valence electrons for elements in the first period of the period table is two, the noble gas helium has completely-filled valence shell containing two electrons known as a duplet. Hydrogen belongs to the first period and is therefore an exception tomthe octet rule.
3. Give each hydrogen two electrons. Hydrogen attains a duplet structure in accordance with the structure of helium
Classify each structure according to its functional class.
Compound A contains a carbonyl bonded to two alkyl groups.
Compound B contains an oxygen bonded to two alkyl groups.
Compound C contains a carbonyl bonded to propyl and N H C H 3.
Compound D is a nitrogen bonded to three alkyl groups.
Classify structure A according to its functional class.
Classify structure B according to its functional class.
Classify structure C according to its functional class.
Classify structure D according to its functional class.
Answer:
Classify each structure according to its functional class.
Compound A contains a carbonyl bonded to two alkyl groups.
Compound B contains an oxygen bonded to two alkyl groups.
Compound C contains a carbonyl bonded to propyl and N H C H 3.
Compound D is a nitrogen bonded to three alkyl groups.
Explanation:
Compound A contains a carbonyl bonded to two alkyl groups.
-C=O group is called a carbonyl group.
If it is present between two alkyl groups then, it is a ketone.
Compound B contains oxygen bonded to two alkyl groups.
Compound B is an example of an ether molecule.
Compound C contains a carbonyl bonded to propyl and N H C H 3.
Compound C is C3H7-CO-NHCH3 which is an amide molecule.
Compound D is nitrogen bonded to three alkyl groups.
This is an example of a tertiary amine group.
Ch3-ch2-o-ch2-ch2-och3
Explanation:
ethoxypropane
Ch3-ch2-o-ch2-ch2-och3
Taxol is a potent chemotherapeutic agent (isolated from the Pacific Yew tree) which is especially effective against ovarian cancer. Which functional groups is not contained in taxol?
Answer:
Amine
Explanation:
The functional groups contained in Taxol are :
Ketone , Ester, Amide and Alcohol
while the functional group that is not contained in the Taxol is Amine
Taxol is a very potent anti-cancer chemotherapeutic, and it is also groped into a class called Taxanes and this makes it effective in the treatment of breast and ovarian cancer.
Which of these is a model that
represents valence electrons in
an atom as dots around the
element's chemical symbol?
Give the balanced equation for the neutralisation of the excess NaOH with HCI.
1 NaCl + 1 HCl ➡️ 1 NaCl + Water (H2O) .
I am holding a balloon containing 439 mL of gas over my fireplace. The temperature and pressure of the gas inside the balloon is 317.15 K and 0.959 atm, respectively. Suppose I don't want the pressure to change, but I want to the volume to go down to 0.378 L. What is the temperature that I need to reach when I cool down the balloon?
To what temperature (in Celsius) must the balloon be cooled to reduce its volume to 0.378 L if the pressure doesn't change (remained constant)?
Answer:
-0.08 °C
Explanation:
We can solve this problem by using Charles' law, which states that at constant pressure:
V₁T₂ = V₂T₁Where in this case:
V₁ = 439 mLT₂ = ?V₂ = 0.378 L ⇒ 0.378 * 1000 = 378 mLT₁ = 317.15 KWe input the data:
439 mL * T₂ = 378 mL * 317.15 KAnd solve for T₂:
T₂ = 273.08 KFinally we convert 273.08 K to Celsius:
273.08 K - 273.16 = -0.08 °C