Explain the different between a molecule and a compound.

Answer is D

Explanation:

Answer:

B. Neutral

Explanation:

When there is a ionic bond,  one element steals or takes away an electron from the other element.

An example is NaCl

In this compound, Chlorine atom steals an extra electron from Sodium to fill its outer shell. So, this is a Ionic bond. Since, the Sodium compound gives away an atom, it is positively charged. Since, Chlorine steals an atom, it is negatively charged. Opposite charges attract, so they become a compound.

When positive and negative mix, it becomes neutral.

the molar concentration should be atleast 5mL off the solution since its disolved

Answer:

8.3

Explanation:

Convert mL to L.

12 mL×1 L1000 mL=0.012 L

Solve for molarity.

Molarity=moles of solute

liters of solution=0.10 mol0.012 L=8.3 M

Answer:

Explanation:

Start by writing water as HOH

Ca(OH)2 +CO2 = CaCO3+ HOH

Next pay attention to the CO2 going to CO3

We need an oxygen.

Fortunately that is provided by the (OH)2

Now we have

Ca(OH)2 + CO2 ==> CaCO3 + HOH

and believe it or not, that is balanced as it is

The left side has 1 Ca. So does the right side

The Left side has 1 C.  So does the right side.

The left side has 2 H. So does the right side

The left side has 2 oxygens (in Ca(OH2)) + 2 oxygens in CO2

So the equation is balanced.

Answer:

When you are going to measure small lengths or objects or when you are going to measure things with great accuracy.

Explanation:

Answer:

-Over time, the rates of the forward and reverse reactions equalize.

-Initially, the concentration of products is low, so the rate of the reverse reaction is also low.

Explanation:

A chemical reaction is said to be reversible when the reactants forms the products, which in turn reacts together again to give rise to the reactants. In a reversible reaction, the formation of products from reactants occurs simultaneously with the reformation of the reactants from the products. For example:

The reversible reaction: A + B ⇆ C + D means;

A + B → C + D and C + D → A + B

The rate at which both forward and reverse reactions are taking place in closed system may be initially different but with time, it gets equal to form an equilibrium reaction. However, at first, only the rate of the forward reaction proceeds because the concentration of the product is low. Hence, the rate of reaction of the reverse reaction (product to reactants) is low as well.

In the reversible reaction above, the rate of the reverse reaction (C + D → A + B) will turn out low initially because the concentration of the products (C and D) are low. With time, the rates of the forward and reverse reaction becomes equal to form an EQUILIBRIUM or STABLE reaction.

Answer:

[tex]\Large \boxed{\mathrm{A}}[/tex]

Explanation:

Rust formed from iron and oxygen combining is a chemical change, because in a chemical change, the resulting substance(s) will have different properties from the substance(s) before the chemical change.

I cant comment... So is it Right?

Answer:

The correct option is;

The gas particles move faster, have the same molecular composition, and have weaker attractions between them than the liquid particles

Explanation:

The properties of the gas molecules in comparison to liquids are

1) The gas molecules are widely spread out

2) After evaporation and while in conditions favorable to the gaseous state, the kinetic energy of a gas is larger than the inter molecular attractive forces

3) A gas fills the container in which it is placed

For liquids

1) There are strong intermolecular forces holding the molecules together in a liquid

2) Liquid attractive forces in a liquid are strong enough to hold neighboring molecules

3) The volume of a liquid is definite.

Answer:

+2

Explanation:

Oxidation number of an element, also called its oxidation state, is the number of electrons its atoms lost or gain in the process of forming a chemical compound.

To determine the oxidation state of an element or compound;

- The sum of all the oxidation numbers in a neutral compound must equal zero (0).

In the compound: Fe2(CO3)2

This compound is a neutral one, hence, its oxidation state is equal to zero (0).

It contains a polyatomic ion (carbonate ion) i.e. CO3 2-, whose net charge is -2.

Hence, to find the oxidation number of Iron (Fe), which is represented by X, in the compound, we say;

X(2) + -2(2) = 0

2X + -4 = 0

2X - 4 = 0

2X = 4

X = +2

Therefore, the oxidation number of Fe in Fe2(CO3)2 is (+2)

The compound Fe2(CO3)2 is called Iron (II) carbonate

Oxidation number of Fe in [tex]\rm Fe_2(CO_3)_2[/tex] is 2. An atom's oxidation number is a positive or negative number.

A notion used in chemistry to characterise the relative electron distribution and the level of oxidation or reduction of atoms in a compound or ion is known as the "oxidation number," sometimes known as the "oxidation state." Based on the presumption that electrons in chemical bonds are entirely transmitted to the more electronegative atom, it is a method of bookkeeping that assigns a notional charge to each individual atom in a molecule or ion.

The -4 stands for the overall charge that the carbonate ions provided, and the x is the Fe's oxidation number.

2x + (-4) = 0

2x - 4 = 0

2x = 4

x = 4/2

x = 2

To know more about oxidation number, here:

https://brainly.com/question/29100691

#SPJ6

Answer:

composition of soda-lime glass is 73% SiO2 – 15% Na2O − 7% CaO − 4% MgO − 1% Al2O3 [129,132,133].

The Soda glass formula is SiO2, Na2O, CaO, Al2O3, K2O, SO3, MgO, Fe2O3, TiO2

Soda glass is a chemical compound that stands out for being the most widely used material to make windows, bottles, glasses, among others.

This compound is characterized by being chemically stable, reasonably hard, and extremely versatile because it can be recycled since it can be melted to make new products.

Its chemical formula is made up of other compounds such as:

Additionally, the compounds found in the highest proportion in glass are SiO2 (74 atoms) and Na2O (13 atoms).

Learn more in: https://brainly.com/question/1247523

Answer:

D. Zinc.

Explanation:

Galvanization is a metal-coating process which involves the application of a thin layer of zinc to an iron or steel, so as to prevent rusting or corrosion.

The zinc metal protects the iron from rusting by sealing the surface of the iron and thus, preventing weathering and oxidation.

Hence, if Mike wants to galvanize iron to protect it from rusting. The metal he should use is zinc (Zn) because a coating of zinc would protect the iron (Fe) by corroding first when exposed to moisture or the atmosphere.

Answer:

b

Explanation:

Answer:

1. Metal.

2. Atom.

3. Homogeneous

4. Compounds.

5. Lustrous

6. Saturated.

7. Colloidal; true.

8. Homogeneous.

Explanation:

1. An element which are sonorous are called metal.

2. An element is made up of only one kind of atom.

3. Alloys are homogeneous mixtures.

4. Elements chemically combines in fixed proportion to form compounds.

5. Metals are lustrous and can be polished.

6. A solution in which no more solute can be dissolved is called a saturated solution.

7. Milk is a colloidal solution but vinegar is a true solution.

8. A solution is a homogeneous mixture.

Answer:

conclusion

Explanation:

it can't be a hypothesis since tests are carried out to verify so it is not a theory

an introduction to an experiment only gives the basis of what we are investigating therefore nothing has been proven and the question is still unanswered

The overall takeaway of an experiment’s results is the conclusion. Hence, option C is correct.

A hypothesis is a testable statement about the relationship between two or more variables or a proposed explanation for some observed experiment.

The overall takeaway of an experiment’s results can't be a hypothesis since tests are carried out to verify so it is not a theory

An experiment only gives an idea about the investigation therefore nothing has been proven and the question is still unanswered.

Hence, the overall takeaway of an experiment’s results is the conclusion.

Learn more about the hypothesis here:

brainly.com/question/5177511

#SPJ5

Answer:

1) The volume occupied by an atom is composed of mainly empty space

2) Atoms have a very small, relatively dense, central nucleus that is positively charged

3) The region around the nucleus of an atom are orbited by negatively charged electrons in a the same fashion planets orbit around the Sun.

Explanation:

The selection of gold for the gold foil experiment was due to its ability to be rolled into extremely thin sheets such that it was expected for alpha particle to perforate or pass through the foil.

Answer:

The answer is the same as .

Explanation:

There are 3 atoms in NaOH, 1 sodium, 1 oxygen and 1 hydrogen.

There are 3 atoms in H2O, 2 hydrogen and 1 oxygen.

Answer:

Rubbing your hands together converts mechanical energy to thermal energy. Turning on a light switch converts mechanical energy to electrical and radiant energy.

Answer:

The volume at 0.860 atm and 15°C will be 56.638 L

Explanation:

Gay Lussac's law explains the variation in the pressure of a gas by modifying its temperature, keeping the volume constant: it determines that pressure and temperature are directly proportional quantities. In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the temperature of the gas remains constant:

[tex]\frac{P}{T}=k[/tex]

On the other hand, Boyle's law determines that the pressure exerted by a gas is inversely proportional to its volume at constant temperature. This is expressed mathematically as:

P*V=k

Finally, Charles's law says that at constant pressure, the volume of an ideal gas is directly proportional to its absolute temperature and is expressed mathematically as:

[tex]\frac{V}{T}=k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charles's and Gay-Lussac's law:

[tex]\frac{P*V}{T}=k[/tex]

When you want to study two different states, an initial one and a final one of a gas, you use:

[tex]\frac{P1*V1}{T1}=\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{1.05 atm*48 L}{298 K}=\frac{0.86atm*V2}{288 K}[/tex]

and solving:

[tex]V2=\frac{288 K}{0.86 atm} *\frac{1.05 atm*48 L}{298 K}[/tex]

you get:

V2= 56.638 L

The volume at 0.860 atm and 15°C will be 56.638 L

Answer:

The water cycle or hydrologic is a continuous cycle where water evaporates, travels into the air and becomes part of a cloud, falls down to earth as precipitation, and then evaporates again. This repeats again and again in a never-ending cycle. Water keeps moving and changing from a solid to a liquid to a gas, over and over again.

Precipitation creates runoff that travels over the ground surface and helps to fill lakes and rivers. It also percolates or moves downward through openings in the soil to replenish aquifers under the ground. Some places receive more precipitation than others do. These areas are usually close to oceans or large bodies of water that allow more water to evaporate and form clouds. Other areas receive less precipitation. Often these areas are far from water or near mountains. As clouds move up and over mountains, the water vapor condenses to form precipitation and freezes. Snow falls on the peaks.

The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle, also known as the hydrological cycle.

The water cycle demonstrates how water is constantly moving both inside the Earth and in the atmosphere. It is a complicated system with a wide range of processes.

Water vapor is created when liquid water evaporates, and this water vapor then condenses to form clouds and falls back to earth as rain and snow.

The constant flow of water between the ground and the atmosphere is known as the water cycle. Water travels to land as precipitation, like snow and rain.

The cycle is then completed by the water evaporating, condensing into clouds in the atmosphere, and precipitating once more on earth. The water cycle is composed mostly of four processes: evaporation, convection, precipitation, and collection.

Thus, The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle.

To learn more about the water cycle, follow the link;

https://brainly.com/question/1151425

#SPJ2

Answer:

inter atomic bonds

Explanation:

because it is loosely held

Explanation:

89cjowdncu8wncuhrwionu9wjvionajofhjowednuiw4fmji2rn most jom4opr

Answer:

Fórmula empírica: C₂H₂N

Fórmula molecular: C₄H₄N₂

Explanation:

Un compuesto que contiene carbono hidrógeno y nitrógeno con fórmula CₐHₓNₙ es sometido a combustion produciendo:

CₐHₓNₙ + O₂ → aCO₂ + x/2 H₂O + nNO₂

Con la masa de dióxido de carbono y agua podemos encontrar las moles de carbono e hidrógeno y su aporte a los 0.452g de muestra que fueron puestos en combustión, así:

Moles C:

Moles C = Moles CO₂ = 0.994g CO₂ ₓ (1mol / 44g) = 0.0226 moles C

Masa C: 0.0226 moles C ₓ (12.01g / mol) = 0.271g Carbono hay en la muestra

Moles H:

Moles H = 2 Moles H₂O = 0.203g H₂O ₓ (1mol / 18g) = 0.0113 moles H₂O = 0.0226 moles H

Masa H: 0.0226 moles H ₓ (1.01g / mol) = 0.023g Hidrógeno hay en la muestra

Así, la masa de nitrógeno en la muestra y sus moles son:

Masa N = 0.452g - 0.271g C - 0.023g H

Masa N = 0.158g Nitrógeno

Y su moles son:

0.158g ₓ (1 mol / 14.01g) = 0.0113 moles N

Con las moles de C, H y N podemos determinar la formula empírica que se define como: "La relación de números enteros más simple entre la cantidad de átomos presentes en una mólecula. Si usamos como base las moles de nitrógeno (Valor menor):

Relación H/N: 0.0226 mol / 0.0113 mol = 2

Relación C/N: 0.0226 mol / 0.0113 mol = 2

Relación N/N: 0.0113 mol / 0.0113 mol = 1

Así, la fórmula empírica es:

Esta fórmula empírica tiene una masa molar de:

2C = 2*12 g/mol = 24g/mol

2H = 2*1g/mol = 2g/mol

N = 14g/mol

24+14+2 = 40g/mol

Como la masa molecular del compuesto es 80g/mol (Dos veces la de la fórmula empírica, la fórmula molecular es 2 veces la fórmula empírica:

a single neutral atom of zinc has 30 protons

Answer:

The particles of frosting absorbed energy from their surroundings and changed from the solid to the liquid state.

Explanation:

On a sunny day, the energy of the particles in the surrounding is higher than the energy of the frosting tray of cupcakes.

As a result of the exchange of energy between the tray of cupcakes and the surrounding, the tray of cupcakes absorbs energy from the surrounding. When this occurs, the firm frosting is now converted from solid to liquid which is runny and wet to touch, hence the answer above.

Answer:

Option C.

Explanation:

The arrangement of electrons in their orbital follows certain rules.

The Hund's rule practically explained how electrons are distributed in their orbitals.

The Hund's rule states that electrons distributed among the orbitals of the same shell singly (without partner) before pairing occurs.

In the filling of these electrons in their orbitals, we fill in the electron without pairing first because electrons tends to repel each other before filling with the opposite spin as shown in the attached photo.

Answer:

Explanation:

The glass (which does not crystallize even though it is accepted) of a window is NOT a mineral, since it is neither a substance of natural origin (although it is manufactured from natural components) nor does it have a defined crystalline structure, that is, the atoms they are not arranged in an orderly and regular way along axes and planes forming flat faces that keep a symmetry.

Remember that a mineral is defined as a solid, inorganic, homogeneous substance, of natural origin, with a crystalline structure and a determined and well-defined chemical composition within narrow margins and that has regular and characteristic physical properties.

Explanation: No, glass is not a mineral. ... Definable chemical composition: SiO2 *Actually, most industrially-produced glass is not pure silica, but having impurities is still a definable chemical composition so this part of the definition is ok. Orderly arrangement of atoms in a lattice: NO.

Answer:

1.Chemistry is the scientific discipline involved with elements and compounds composed of atoms, molecules and ions: their composition, structure, properties, behavior and the changes they undergo during a reaction with other substances.

2.The scientific method is an empirical method of acquiring knowledge that has characterized the development of science since at least the 17th century. It involves careful observation, applying rigorous skepticism about what is observed, given that cognitive assumptions can distort how one interprets the observations.

Answer:

The system will shift to the left producing more moles of gases trying to maintain the original pressure of the system

Explanation:

Based on LeChatelier's principle, a change in temperature, pressure, volume or concentration on a system result in an opposing change trying to maintain the initial equilibrium conditions.

In the reaction:

N₂(g) + 3H₂(g) ⇄ 2NH₃(g)

4 moles of gas reacts producing 2 moles of gas.

In a gas reaction, the system will try to maintain the total pressure.

If the volume of the container increases, the system will shift to the side of the reaction that has more moles of gases in order to maintain the pressure.

That means if in the reaction the volume of the container increase from 2.0L to 4.0L the system will shift to the left producing more moles of gases trying to maintain the original pressure of the system.

Answer:

C. 1 cubic foot of loose sand

Explanation:

For many  objects having equal volume , surface area will be maximum

of the object which has spherical shape .

But when a sphere is broken into tiny small spheres , total surface area of all the small spheres will be more than surface area of big sphere .

Hence among the given option , surface area of loose sand will have greatest surface area . Loose sand is equivalent to small spheres .

Answer:

the answer would be C 1 cubic foot of loose sand.

There are two types of ions in chemistry, one is cation and the other is anion. Anion is the negative charge ion. Therefore, the formula of hydrogen sulfite ion is HSO₃⁻

Chemical Compound is a combination of ions, ions forms by combination of element and element forms by combination of atoms in fixed proportion.

According to our question the chemical compound from which hydrogen sulfite ion is coming is sulfurous acid that is H₂SO₃. So to get hydrogen sulfite ion we need to remove one hydrogen ion that is H⁺ from the chemical compound sulfurous acid.

The balanced reaction is

H₂SO₃[tex]\rightarrow[/tex]H⁺ + HSO₃⁻

From above reaction we can see that the charge over hydrogen sulfite ion is -1

Therefore the formula of hydrogen sulfite is HSO3-

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ6