Explain in your own words, why can’t we predict earthquakes?

Answer:

1. carboxylic acid

2. ether

3. aldehyde

4. ketone

5. amine

6. alcohol

Explanation:

Know the functional groups. If you would like me to teach you them let me know.

- Hope that helps! Please let me know if you need further explanation.

Answer:

6Fe^2+(aq) -------> 6Fe^3+(aq) + 6e

Explanation:

The balanced oxidation half equation is;

6Fe^2+(aq) -------> 6Fe^3+(aq) + 6e

A redox reaction is actually an acronym for oxidation-reducation reaction. Since the both reactions are complementary, there can't be oxidation without reduction and there can't be reduction without oxidation.

The main characteristic of redox reactions is that electrons are transferred in the process. The number of electrons transferred is usually deduced from the balanced reaction equation. For this reaction, the balanced overall reaction equation is;

Cr2O7^2–(aq) + 6Fe^2+(aq) +14H^+(aq)→ 2Cr^3+(aq) + 6Fe^3+ (aq) + 7H2O(l)

It is clear from the equation above that six electrons were transferred. Thus six Fe^2+ ions lost one electron each in the oxidation half equation as shown in the balanced oxidation half equation above.

Answer: In CaF2, the oxidation number of Ca is +2

, and that of F is -1

. In H2SO4, the oxidation number of H is +1

, that of S is +6

, and that of O is -2

. In CaSO4, the oxidation number of Ca is +2

, that of S is +6

, and that of O is -2

. In HF, the oxidation number of H is +1

, and that of F is -1

Answer:  A basic solution is defined as a solution which has more hydroxide (OH-) ions than hydronium ions (H+)

Answer:

Fusion doesn't produce runway chain reactions the way fission can, so there's no need to worry about meltdowns.

Answer:

i believe it is strong acids, strong bases, and salts.

Explanation:

Hope this helps : )

Answer:

It is widely believed that Buddhism entered China via the Silk Road under the Han Dynasty. After trade and travel was established with the Yuezhi, who by that time were forced southward toward India, Yuezhi monks began to travel with the merchant caravans; preaching their religion along the Silk Road.

Explanation:

i got this from google

Answer:

The correct answer is 6.32 ml

Explanation:

We have the following data:

Mass : m = 9.37 g

Density : d= 1.483 g/mL

The density a substance is equal to the mass of the substance divided into its volume. So, we calculate the volume (V) of chloroform from the mass and density as follows:

[tex]d=\frac{m}{V}[/tex]   ⇒  [tex]V = \frac{m}{d} = \frac{9.37 g}{1.483 g/ml} = 6.32 ml[/tex]

Answer:

mass ( g ) = 348 g

Explanation:

First you know : M = mole / volume (L)

in question you have the M and V and the formula of SUBSTANCE ( KF )

first you get the number of mole from equation above

so 3 = no of mole / 2

no of mole = 3 × 2 = 6 moles

and the moles equation is no of moles = mass ( g ) / molecular weight ( g/mole )

so you have already calculate the moles and you can know the MW from the Question

Mw of KF = 39 + 19 = 58

so n = mass / MW

so 6 = mass / 58

mass ( g ) = 348 g

GOOD LUCK

Answer:

1.5 L

Explanation:

Step 1:

The balanced equation for the reaction. This is given below:

HCl + NaOH —> NaCl + H2O

From the balanced equation above, The mole ratio of the acid (nA) = 1

The mole ratio of the base (nB) = 1

Step 2:

Data obtained from the question. This includes the following:

Molarity of acid (Ma) = 0.5M

Volume of acid (Va) =..?

Volume of base (Vb) = 1L

Molarity of base (Mb) = 0.75M

Step 3:

Determination of the volume of the acid needed for the reaction.

Using the formula:

MaVa/MbVb = nA/nB

The volume of the acid needed for the reaction can be obtained as follow:

0.5 x Va / 0.75 x 1 = 1

Cross multiply

0.5 x Va = 0.75 x 1

Divide both side by 0.5

Va = 0.75 /0.5

Va = 1.5 L

Therefore, the volume of the acid, HCl needed for the reaction is 1.5L

Answer:

it has  a huge surface-to-volume ratio, very high porosity and completely different physiochemical properties.

Explanation:

idk if the answer is good  !

sorry

Answer:

9.7 atm.

Explanation:

The following data were obtained from the question:

Initial pressure (P1) = 1 atm

Initial volume (V1) = 0.725 L

Final volume (V2) = 0.075 L

Final pressure (P2) =?

The final pressure can be obtained by using the Boyle's law equation since the temperature is constant. This is illustrated below:

P1V1 = P2V2

1 x 0.725 = P2 x 0.075

Divide both side by 0.075

P2 = 0.725 / 0.075

P2 = 9.7 atm.

Therefore, the new pressure is 9.7 atm.

Answer:

Option B. 20mL

Explanation:

Step 1:

Data obtained from the question.

Volume of base (Vb) =..?

Molarity of base (Mb) = 0.2M

Volume of acid (Va) = 40mL

Molarity of acid (Ma) = 0.1M

Step 2:

The balanced equation for the reaction.

HCl + NaOH —> NaCl + H2O

From the balanced equation above, the following were obtained:

Mole ratio of the acid (nA) = 1

Mole ratio of the base (nB) = 1

Step 3:

Determination of the volume of base, NaOH needed for the reaction. This is illustrated below:

MaVa/MbVb = nA/nB

0.1 x 40 / 0.2 x Vb = 1

Cross multiply

0.2 x Vb = 0.1 x 40

Divide both side by 0.2

Vb = 0.1 x 40 / 0.2

Vb = 20mL

Therefore, the volume of the base is 20mL.

Answer:

Chemical properties can be tested without changing the substance

Explanation:

Answer:

[tex]m_{H_2}=0.504gH_2[/tex]

Explanation:

Hello,

In this case, since the reaction is:

[tex]2 Na + 2 H_2O \rightarrow 2 NaOH + H_2[/tex]

We notice that since there is an excess of water, we can directly compute the yielded grams of hydrogen by using the following stoichiometric procedure, considering the 2:1 molar ratio between sodium and hydrogen (notice the 2 before the sodium and the 1 before the hydrogen at the chemical reaction) and that gaseous hydrogen has a molar mass of 2 g/mol:

[tex]m_{H_2}=11.50gNa*\frac{1molNa}{22.98gNa} *\frac{1molH_2}{2.02molNa} *\frac{2gH_2}{1molH_2} \\\\m_{H_2}=0.504gH_2[/tex]

Best regards.

Answer:

0.503g of H₂ are produced

Explanation:

Based on the chemical reaction:

2 Na + 2 H₂O → 2 NaOH + H₂

2 moles of Na react with 2 moles of water to produce 2 moles of NaOH and 1 mole of H₂

11.50g of Na -limiting reactant, molar mass 22.99g/mol- are:

11.50g× (1mol / 22.99g) = 0.500 moles of Na.

As 2 moles of Na produce 1 mole of H₂:

0.500 moles of Na × (1 mole H₂ / 2 moles Na) = 0.250 moles of H₂

As molar mass of H₂ is 2.01g/mol:

0.250 moles of H₂ × (2.01g / 1mol) = 0.503g of H₂ are produced

Answer:

[tex]\large \boxed{\text{D.) 91 kPa}}[/tex]

Explanation:

We can use the Ideal Gas Law — pV = nRT

Data:

V = 15.0 L

n = 0.55 mol

T = 300 K

Calculation:

[tex]\begin{array}{rcl}pV & =& nRT\\p \times \text{15.0 L} & = & \text{0.55 mol} \times \text{8.31 kPa$\cdot$ L$\cdot$K$^{-1}$mol$^{-1}\times$ 300 K}\\15.0p & = & \text{1370 kPa}\\p & = & \textbf{91 kPa}\end{array}\\\text{The pressure in the container is $\large \boxed{\textbf{91 kPa}}$}[/tex]

Answer:

It is a typical fires that started out of a lightning strike, or people carelessly starting it, or accidentally, or even arson, that went un-noticed and got out of hand.

Answer:

Explanation:

Forest fires always start by one of two ways - naturally caused or human caused. Natural fires are generally started by lightning, with a very small percentage started by spontaneous combustion of dry fuel such as sawdust and leaves. On the other hand, human-caused fires can be due to any number of reasons.

Answer:

nickel 48.1063%

Phosphorus 16.9245%

Oxygen 34.9692%

The percent composition of each element like nitrogen, oxygen and phosphorous in Ni₃(PO₄)₂ are 48.03%, 34.97% and 16.93% respectively.

Percent composition of any element present in any compound will be calculated as:
% comosition = (Mass of element / Mass of compound)×100%

Mass of Ni₃(PO₄)₂ compound = 366.02 g/mol

Molar mass of 3 Nitrogen atoms = 3×58.6 = 175.8 g/mol

Moar mass of 2 Phosphorous atoms = 2×31 = 62 g/mol

Moar mass of 8 Oxygen atoms = 8×16 = 128 g/mol

% comosition of Nitrogen = (175.8/366.02)×100% = 48.03%

% comosition of Oxygen = (128/366.02)×100% = 34.97%

% comosition of Phosphorous = (62/366.02)×100% = 16.93%

Hence % composition of nitrogen, oxygen and phosphorous is 48.03%, 34.97% and 16.93% respectively.

To know more about percent composition, visit the below link:

https://brainly.com/question/21044245

Answer:

c,density is the measure of compactness in a substance. Liquid particles are close together however they aren't as close as the particles in solids.

Answer:

I would say that the mutation has no effect on the organism, as it doesn't help or harm it.

hope this helps :)

Explanation:

Answer:

its a neutral

Explanation:

i did the test

Answer:

539.76 moles of O₂

Explanation:

Equation of reaction:

4Al + 3O₂ → 2Al₂O₃

From the equation of reaction above, 4 moles of Al will react with 3 moles of O₂

We can use mole-concept to find the number of moles of O₂.

4 moles of Al = 3moles of O₂

719.68 moles of Al = x moles of O₂

X = (3 × 719.68) / 4

X = 2159.04 / 4

X = 539.76 moles

539.76 moles of O₂ will react with 719.68 moles of Al

Answer:

[tex]n_{O_2}=959.57molO_2[/tex]

Explanation:

Hello,

In this case, given the reaction:

[tex]4Al (s) + 3O_2(g) \rightarrow 2Al_2O_3(s)[/tex]

Since aluminum and oxygen are in a 4:3 molar ratio, we compute the moles of oxygen that completely react as shown below:

[tex]n_{O_2}=719.68molAl*\frac{3molO_2}{4molAl} \\\\n_{O_2}=959.57molO_2[/tex]

Best regards.

The right answer is Proton.

Additional Information:

There are three types of subatomic particles. They are:

Proton is a positively charged particle,Electron is negatively charged particle and Neutron is charge less.

Hope it will be helpful to you...

Answer: PtF6

Explanation:  is one of seventeen known binary hexafluorides.

Answer: 179 of [tex]H_2O[/tex] will be produced.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} H_2=\frac{20.0g}{2.01g/mol}=9.95moles[/tex]

[tex]2H_2+O_2(g)\rightarrow 2H_2O[/tex]

According to stoichiometry :

2 moles of [tex]H_2[/tex] give =  2 moles of [tex]H_2O[/tex]

Thus 9.95 moles of [tex]H_2[/tex] will require=[tex]\frac{2}{2}\times 9.95=9.95moles[/tex]  of [tex]H_2O[/tex]

Mass of [tex]H_2O=moles\times {\text {Molar mass}}=9.95moles\times 18g/mol=179g[/tex]

Thus 179 of [tex]H_2O[/tex] will be produced.

Answer:

Aluminium Chloride and Hyrdron, also known as proton/

Explanation:

Answer:

8 kg mass

Explanation:

As we can see in the image the weight of mass 8 kgs has a large surface area as compared to the surface area of other masses. In general, it has been observed that a wide surface area has more surface particle for heat conduction. Hence, the rate of heat transfer is directly proportional to the surface area of heat conducting surface. Thus, the larger the surface area, the faster is the rate of heat conduction.

Hence, weight of mass 8Kg wil transfer heat a fast rate.

Answer:

option c

Explanation:

ffuunkie. tfnhc dhrhrjebrjeieie

Answer:

it should be +0.46 :)

Explanation:

I just took the test and got it right.

Answer:

I think it's +1.14 V, but don't take my word for it..