Answer:
Solar radiation may be converted directly into electricity by solar cells (photovoltaic cells). In such cells, a small electric voltage is generated when light strikes the junction between a metal and a semiconductor (such as silicon) or the junction between two different semiconductors.
Explanation:
Pls mark me as brainliest
Solar radiation may be converted directly into electricity by solar cells or photovoltaic cells. This is how solar energy is used to generate electricity.
What is solar energy?Solar energy is the radiant light and heat from the Sun that is captured and used in a variety of technologies, including solar power to generate electricity, solar thermal energy, and solar architecture.
When the sun shines on a solar panel, the photovoltaic cells in the panel absorb the energy from the sun. When light strikes the junction of a metal and a semiconductor (such as silicon) or the junction of two different semiconductors, a small electric voltage is generated. This energy generates electrical charges that move in response to an internal electrical field in the cell, resulting in the flow of electricity.
Therefore, solar energy is used to generate electricity.
To learn more about solar energy, click here:
https://brainly.com/question/9704099
#SPJ6
radio waves are electromagnetic waves that travel at the speed of light 300 000 kilometers per second what is the wave length of FM radio waves received 100 megahertz on your radio dial
The wavelength of 100-MHz radio waves is 3 m, yet using the sensitivity of the resonant frequency to the magnetic field strength, details smaller than a millimeter can be imaged.Hope this helps you ❤️MaRk mE aS braiNliest ❤️
A resistor is submerged in an insulated container of water. A voltage of 12 V is applied to the resistor resulting in a current of 1.2 A. If this voltage and current are maintained for 5 minutes, how much electrical energy is dissipated by the resistor
Explanation:
Given:
[tex]\Delta t = 5\:\text{min} = 300\:\text{s}[/tex]
[tex]V = 12 V[/tex]
[tex]I = 1.2 A[/tex]
Recall that power P is given by
[tex]P = VI[/tex]
so the amount of energy dissipated [tex]\Delta E[/tex] is given by
[tex]\Delta E = VI\Delta t = (12\:\text{V})(1.2\:\text{A})(300\:\text{s})[/tex]
[tex]\:\:\:\:\:\:\:= 4320\:\text{W} = 4.32\:\text{kW}[/tex]
need help with question after number 40
Answer:
4 device 3 e e and 4 divide 3 + 5 barabar 11 33 size to 46 size 35 and size 49 browser
A plastic dowel has a Young's Modulus of 1.50 ✕ 1010 N/m2. Assume the dowel will break if more than 1.50 ✕ 108 N/m2 is exerted. What is the maximum force (in kN) that can be applied to the dowel assuming a diameter of 2.30 cm?
A.
52.3 kN
B.
62.3 kN
C.
72.3 kN
D.
42.3 N
Answer:
cobina
Explanation:
me 2
Which of the following is a form of mechanical energy?
A. Chemical energy
B. Gravitational potential energy
C. Thermal energy
D. Nuclear energy
Answer:
B
Explanation:
no reason for this answer
A circular parallel-plate capacitor whose plates have a radius of 25 cm is being charged with a current of 1.3 A. What is the magnetic field 11 cm from the center of the plates
The magnetic field at 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.
Given;
radius of the circular plate, d = 25 cm = 0.25 m
current in the plate, I = 1.3 A
distance from the center of the circular plate, r = 11 cm = 0.11 m
To find:
magnetic field (B)The magnetic field from the given distance is calculated as from Biot Savart equation:
[tex]B = \frac{\mu_o I}{2\pi r} \\\\where;\\\\\mu_o \ is \ permeability \ of \ free \ space \ 4\pi \times 10^{-7} \ T.m/A\\\\B = \frac{(4\pi \times 10^{-7} ) \times (1.3)}{2\pi \times 0.11} \\\\B = 2.364 \ \times 10^{-6} \ T[/tex]
Therefore, the magnetic field 11 cm from the center of the plates is 2.364 x 10⁻⁷ T.
Learn more here: https://brainly.com/question/17035710
HELP ME ASAP PLSSS!!
List what sources of uncertainty go into calculating the wavelength of the laser (no explanation necessary here). (b) Accurately report the uncertainties for these quantities. (c) Explain which of these contributes the most to the final uncertainty on the laser wavelength
Answer:
thanks for da 5points hoi
Explanation: thanks dawg
There can be uncertainty in calculating the wavelength of a laser light due to experimental errors
All measurements have an uncertainty, in the case of direct measurements the uncertainty is equal to the precision of the given instrument.
What are uncertainity in measuring ?Uncertainty means the range of possible values within which the true value of the measurement lies.
What are errors?
The deviation in the value of the measured quantity from the actual quantity or true value is called an error
(a) For the calculation of wavelength of laser light , the sources which can lead to uncertainty are
1. least count of measuring instruments like spectrometer or interferometer
2. Parallax error in the measurement
3. Error in identifying the order of fringes
4.. unable to identify the accurate reading of Vernier or circular scales present in the measuring instruments.
5. Propagating errors
What is least count?
The least count of a measuring instrument is the smallest and accurate value in the measured quantity that can be measured by instrument.
What is propagating error?When you have derived variables, that is, when measurements are made with different instruments, each with a different uncertainty, the way to find the uncertainty or error is that all the errors add up. which increases the uncertainty
b. The uncertainty in measurement due to least count depends on the instrument used for measurement f wavelength. A Michelson's
interferometer has the least count of .0001mm. whereas spectrometer has a least count of 0.5⁰. Hence uncertainty in the measurement by Michelson's interferometer is very less as compared to any other instrument.
C. The maximum uncertainty arises due to the least count , as all other errors can be minimized by taking an average value of many observations but the least count of an instrument do not change so uncertainty within the least count arises.
To know more on errors and uncertainty in measurements here
https://brainly.com/question/24652157
#SPJ2
A cowgirl ties one end of a 10.0 m long rope to a fence post (to the left of the cowgirl) and pulls on the other end so the rope is stretched horizontally with a tension of 140 N. The mass of the rope is
Answer:
Mass is zero if the whole rope is horizontal. Imaginary rope.
Explanation:
With any mass at all, only a small section of the rope will be truly horizontal. The rope curve will be a a catenary.
A circular loop of wire 10 cm in radius carries a current of 20 A. The axial magnetic field 15 cm from the center of the loop is approximately:
a. 37 mu-T
b. 13 mu-T
c. 21 mu-T
d. 41 mu-T
e. 18 mu-T]
Answer:
ans is c
Explanation:
chk photo
The axial magnetic field 15 cm from the center of the loop is approximately 21 μT. Hence, option (c) is correct.
What is magnetic field?In the vicinity of a magnet, an electric current, or a shifting electric field, there is a vector field called a magnetic field where magnetic forces can be seen. Electric charges in motion and the intrinsic magnetic moments of elementary particles connected to the fundamental quantum characteristic known as spin create a magnetic field.
Given parameters:
Radius of the circular loop: r = 10 cm = 0.10 m.
Current passing through the loop: I = 20 A.
Axial distance of the point: z = 15 cm = 0.15 m.
Hence, the axial magnetic field at that point:
B = (μ₀/4π) 2πR²I/(z²+R²)^(3/2)
By putting these values, we get B = 21 × 10⁻⁶ T = 21 μT.
Learn more about magnetic field here:
https://brainly.com/question/14848188
#SPJ5
Define hydropower or hydroelectric power ?
No Spam..
[tex]\:[/tex]
Hydroelectric power, also called hydropower is the electricity produced from generators driven by turbines that convert the potential energy of falling or fast-flowing water into mechanical energy.
Answer:
Hydroelectric power/hydropower - electricity produced by a hydraulic source, specifically energy generated falling or flowing water
A uniform disk with mass 43.9 kgkg and radius 0.280 mm is pivoted at its center about a horizontal, frictionless axle that is stationary. The disk is initially at rest, and then a constant force 29.0 NN is applied tangent to the rim of the disk. Part A What is the magnitude vv of the tangential velocity of a point on the rim of the disk after the disk has turned through 0.400 revolution
Answer:
1.36 m/s
Explanation:
I = ½mR²
τ = FR
α = τ/I = FR / (½mR²) = 2F/mR
a = Rα = 2F/m
s = θR
v² = u² + 2as
u = 0
v = √2as = √(2(2F/m)(θR)) = 2√(FθR/m)
v = 2√(29.0(0.400)(2π)(0.280) / 43.9) = 1.3636272...
A rugby player passes the ball 7.00 m across the field, where it is caught at the same height as it left his hand.
(a) At what angle was the ball thrown if its initial speed was 12.0 m/ s, assuming that the smaller of the two possible angles was used?
(b) What other angle gives the same range, and why would it not be used?
(c) How long did this pass take?
Answer:
a) θ = 14.23º, b) θ₂ = 75.77, c) t = 0.6019 s
Explanation:
This is a missile throwing exercise.
a) the reach of the ball is the distance traveled for the same departure height
R = [tex]\frac{v_o^2 \ sin 2 \theta }{g}[/tex]
sin 2θ = [tex]\frac{Rg}{v_o^2}[/tex]
sin 2θ = 7.00 9.8 / 12.0²
2θ = sin⁻¹ (0.476389) = 28.45º
θ = 14.23º
the complementary angle that gives the same range is the angle after 45 that the same value is missing to reach 90º
θ ’= 90 -14.23
θ’= 75.77º
b) the two angles that give the same range are
θ₁ = 14.23
θ₂ = 75.77
the greater angle has a much greater height so the time of the movement is greater and has a greater chance of being intercepted by the other team.
C) the time of the pass can be calculated with the expression
x = v₀ₓ t
t = x / v₀ₓ
t = 7 / 11.63
t = 0.6019 s
The average human walks at a speed of 5km per hour if your PE teacher asks you to walk for 30 minutes in gym class how far would you walk(km)?
Answer:
2.5 km
Explanation:
Answer:
2.5 km
Explanation:
Distance = speed x time
So =5 x 0.5
A painter sets up a uniform plank so that he can paint a high wall. The plank is 2 m long and weighs 400 N. The two supports holding up the plank are placed 0.2 m from either end. Show that the upwards force on each of the planks is 200 N. Draw a sketch.
The upward force on each supporting plank is 200 N
The given parameters include;
weight of the plank, W₁ = 400 Nlength of the plank, l = 2 mupward force of each supporting plank, = W₂ and W₃To show that the upward force of each supporting plank is 200 N, make the following sketch.
W₂ W₃
↑ ↑
-----------------------------------------------------------------------
0.2m ↓ 0.2m
400 N
The two supporting planks keeps the 2m plank in equilibrium position. If the plank is in equilibrium position the sum of the upward forces equals sum of the downward force.W₂ + W₃ = 400 N
But the distance of each supporting plank from the end is equal, (0.2m).
Then, W₂ = W₃
2W₂ = 400 N
W₂ = 400N/2
W₂ = 200 N
W₃ = 200 N
Therefore, the upward force on each supporting plank that keeps the plank in equilibrium position is 200 N.
To learn more about equilibrium forces visit: https://brainly.com/question/12582625
Can someone log into my acc FOR ME I will pay you to complete my physics assignments for money or points?!!
Answer: no sorry../
Explanation:
What is measurement
Answer:
Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.
Explanation:
A scientific method can be defined as a research method that typically involves the use of experimental and mathematical techniques which comprises of a series of steps such as systematic observation, measurement, and analysis to formulate, test and modify a hypothesis.
Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.
Basically, the dimensions include important parameters such as width, height, length, area, volume, circumference, breadth, etc.
A rock with a mass of 16 kilograms is put aboard an airplane in New York City and flown to Boston. How much work does the gravitational field of the earth do on the rock
The work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.
The given parameter include:
the mass of the object, m₁ = 16 kg
Note: the mass of the earth, m₂ = 5.972 x 10²⁴ kg
The work done by the gravitational field of the earth is given as;Work done = gravitational force (F) x radius of the earth (R)
[tex]Work \ done = \frac{Gm_1m_2}{R^2} \times R\\\\Work \ done = \frac{Gm_1m_2}{R} \\\\where;\\\\R \ is \ the \ radius \ of \ the \ earth = 6,378 \ km = 6,378,000 \ m\\\\G \ is \ the \ universal \ gravitation \ constant = 6.674 \times 10^{-11} Nm^2/kg^2\ \\\\Work \ done = \frac{(6.674 \times 10^{-11} ) \times (5.972\times 10^{24}) \times (16)}{6,378,000 } \\\\Work \ done = 9.998 \times 10^{8} \ J[/tex]
Therefore, the work done by the gravitational field of the earth on the rock is 9.998 x 10⁸ J.
To learn more about work done by gravitational field of the earth visit: https://brainly.com/question/13934028
An ink-jet printer steers charged ink drops vertically. Each drop of ink has a mass of 10-11 kg, and a charge due to 500,000 extra electrons. It goes through two electrodes that gives a vertical acceleration of 104 m/s2. The deflecting electric field is _____ MV/m.
Answer:
E = 1.25 MV / m
Explanation:
For this exercise let's use Newton's second law
F = m a
where the force is electric
F = q E
we substitute
q E = m a
E = m a / q
indicate there are 500,000 excess electrons
q = 500000 e
q = 500000 1.6 10⁻¹⁹
q = 8 10⁻¹⁴ C
the mass is m = 10⁻¹¹ kg and the acceleration a = 10⁴ m / s²
let's calculate
E = 10⁻¹¹ 10⁴ / 8 10⁻¹⁴
E = 0.125 10⁷ V / m = 1.25 10⁶ V / m
E = 1.25 MV / m
Rays of light coming from the sun (a very distant object) are near and parallel to the principal axis of a concave mirror. After reflecting from the mirror, where will the rays cross each other at a single point?
The rays __________
a. will not cross each other after reflecting from a concave mirror.
b. will cross at the center of curvature.
c. will cross at the point where the principal axis intersects the mirror.
d. will cross at the focal point. will cross at a point beyond the center of curvature.
A concave mirror is an example of curved mirrors. So that the appropriate answer to the given question is option D. The rays will cross at the focal point.
A concave mirror is a type of mirror in which its inner part is the reflecting surface, while its outer part is the back of the mirror. This mirror reflects all parallel rays close to the principal axis to a point of convergence. It can also be referred to as the converging mirror.
In this type of mirror, all rays of light parallel to the principal axis of the mirror after reflection will cross at the focal point.
Therefore, the required answer to the given question is option D. i.e The rays will cross at the focal point.
For reference: https://brainly.com/question/20380620
Which technological device makes an energy conversion in the same way that a human ear makes an energy conversion?
a.) a loudspeaker
b.) a headphone
c.) a light bulb
d.) a microphone
I think it's c because of the concept of mechanical energy to electrical energy but I'm not sure
Answer:
I THINK C
Explanation:
BECAUSE A Light Emitting Diode (LED) glows even when a weak electric current passes through it.
The speed of a sound wave
A. Depends on wavelength.
B. Depends on the medium.
C. Depends on amplitude.
D. None of the above.
Answer:
B) the medium
Explanation:
B. Depends on the medium.
Which of the following is not an example of approximate simple harmonic motion
Answer:
where are the options
it's not full question
A massage technique that consists of applying pressure to specific points of the face and body to release muscle tension, stimulate and restore balance (chi) is known as
Answer:Acupressure
.
.
..
But why post this question in Physics
Describe sound and record
Answer:
record is information created, received and maintained as evidence and information by an organization or person.in simpler terms it's a collection of of fields probably of different data types.
sound is however something loud or soft.which can be defined as vibrations that travel through the air or another medium.
I hope this helps
A political campaign manager must decide whether to emphasize television advertisements or letters to potential voters in a reelection campaign. Describe the production function for campaign votes.
A. Campaign managers produce campaign votes.
B. Reelection campaigns produce campaign votes.
C. Television advertisements and campaign votes produce letters to potential voters.
D. Television advertisements and letters to potential voters produce reelection campaigns.
E. Television advertisements and letters to potential voters produce campaign votes.
How might information about this function (such as the shape of the isoquants) help the campaign manager plan strategy?
A. If the marginal rate of technical substitution of television advertisements for letters to potential voters is constant, then the campaign manager should use a combination of the two inputs.
B. If television advertisements and letters to potential voters are perfect complements, then the campaign manager should use them in fixed proportions.
C. If television advertisements and letters to potential voters are perfect substitutes, then the campaign manager should use them in fixed proportions.
D. If the isoquant curves for television advertisements and letters to potential voters are convex, then the campaign manager should use only the cheaper input per vote.
E. If the isocost lines for television advertisements and letters to potential voters are convex, then the campaign manager should use a combination of the two inputs.
Answer:
First answer - (E)
Second answer - (B)
Explanation:
The trade-off here is between TV ADVERTISEMENTS and LETTERS TO POTENTIAL VOTERS. The campaign manager for the candidate who is running for reelection, is trying to decide which of the two factors he should use more of or emphasize. The production function for campaign votes can be simplified as
TVAD + LTPV = CV
This is the production function for campaign votes.
PART A
Describe the production function for campaign votes (in words).
ANSWER: (E)
Television advertisements and (or 'plus') letters to potential voters, produce (or 'equal') campaign votes.
PART B
How might information about this function (such as the shape of the isoquants) help the campaign manager plan strategy?
ANSWER: (B)
If television advertisements and letters to potential voters are perfect complements (complements are goods or actions that 'must' go together or be used together) then the campaign manager should use them in fixed proportions (e.g. in a ratio of 50:50).
Which circuit element is of special importance in AC circuits?
A. Resistor
B. Ammeter
C. Battery
D. Capacitor
Answer:
Explanation:capacitor
Answer:
Ammeter
Explanation:
pls mark me as a brainlist
Fish is cold blooded animal
1.2miles=__________km
Answer:
1.931 kilometres is the answer of 1.2 miles
Answer and Explanation:
1 mile = 1.609 km
Set up a fraction to cancel the miles to get the kilometers.
[tex]\frac{1.2mi}{?km} *\frac{1.609}{1mi} = 1.9308km[/tex] <- This is the answer.
#teamtrees #PAW (Plant And Water)
1 A thing ring has a mass of 6kg and a radius of 20cm. calculate the rotational inertia.
Answer:
2400kgm²
Explanation:
Rotational inertia=mass x radius²
