expand and simplify √3(√3-1)

Answer:

According to the proposed interrogate, as well as the graph provided, the correct answers to such are identified as B. Y = -2x + 5 and C. 2x + y = 4.

Step-by-step explanation:

To evaluate such, a comprehension of linear Cartesian data is required:

Slope = rise/run. If there is a negative rise, the direction of the line is proportional to the left-hand side as it exponentially grows or augments in units.

Y-intercept: The peculiar point in which the linear data observed intersects the y-axis.

X-intercept: The peculiar point in which the linear data observed intersects the x-axis.

Since this is a negative linear, all negative slopes apply.

The interrogate states, “Check all that apply.” Thus, there may be more than one correct answer, shall such be disseminated.

A. Cannot be the answer as the line should have been a horizontal line contained within quadrants I and II on the Cartesian Plane.

B. Contains a negative slope, thus is disclosed as a correct answer.

C. This configuration is denoted in “Standard Form” or “General Form”. To convert this to “Slope-Intercept Form” the following must be executed mathematically:

2x + y = 4

Y = -2x + 4 <== Slope-Intercept Form (Contains a negative slope, thus considered a correct answer.

D. Likewise, this configuration is denoted in “Standard Form” or “General Form”. To convert this to “Slope-Intercept Form” the following must be executed mathematically:

X - y = 9

-y = -x + 9

Y = x - 9 <== Slope-Intercept Form (Cannot be considered as the correct answer, given the positive slope configuration, thus is marked out).

Thus far, as evaluated, the correct answers to the proposed interrogate, as according to the linear data provided in the Cartesian Plane is acknowledged, and henceforth disseminated, as B. Y = -2x + 5 and C. 2x + y = 4.

*I hope this helps.

Answer:

B

Step-by-step explanation:

they have the same intercepts

Answer:

4

Step-by-step explanation:

We want the cubed root of 64  

(64)^(1/3)  

(4*4*4) ^ (1/3)  

4  

Unless this is 3 * sqrt(64)  

then it would be  

3 sqrt(8*8)  

3 (8)  

24

9514 1404 393

Answer:

  23°

Step-by-step explanation:

The angle a vector makes relative to the +x axis is found as ...

  α = arctan(y/x) = arctan(4.30/10.3) ≈ 22.66°

The angle is about 23°.

__

Additional comment

This vector resides in the first quadrant, so no adjustment of the angle is needed. In other quadrants, 180° may need to be added or subtracted from the angle given by the arctan function to arrive at the correct value. (Some calculators and spreadsheets have an ATAN2(x, y) function that takes signs into account.)

Answer:

Step-by-step explanation:

684 dollars

...

Calculate Energy Cost by Appliance

Answer:

x=8

Step-by-step explanation:

Answer:

[tex]Given:[/tex] Δ ABC ≈ ΔDEF

[tex]therefor:[/tex] A(ΔABC)/A(ΔDEF)=(BC)²/(EF)²

⇒ 34/A(ΔDEF)=9²/(13.5)²

⇒34/A(ΔDEF)=81/182.25

⇒A(ΔDEF)=34×182.25/81

⇒Area of ΔDEF=76.5 cm²

----------------------------------

Hope it helps...

Have a great day!!!

Answer:

Sample space = 36

P(sum of 6) = 5/36

Step-by-step explanation:

Number of faces on a dice = 6

The sample space, for a toss of 2 dice ; (Number of faces)^number of dice

Sample space = 6^2 = 6*6 = 36

Sum of numbers appearing on the dice = 6

The sum of 6 from the roll of two dice has 5 different outcomes ; Hence, required outcome = 5

Total possible outcomes = sample space = 36

Probability, P = required outcome / Total possible outcomes

P = 5 / 36

Probabilities are used to determine the chances of events

The given parameters are:

[tex]n=6[/tex] --- the faces of a six-sided die

[tex]r = 2[/tex] -- the number of dice

(a) The number of sample points

This is calculated as:

[tex]Sample = n^r[/tex]

So, we have:

[tex]Sample = 6^2[/tex]

Evaluate the exponent

[tex]Sample = 36[/tex]

Hence, the number of sample points is 36

(b) The probability that the sum of 6

See attachment for the sample space of the sum of two dice.

From the sample space, there are 5 outcomes where the sum is 6.

So, the probability is:

[tex]Pr = \frac{5}{36}[/tex] --- where 36 represents the number of sample points

Divide 5 by 36

[tex]Pr = 0.1389[/tex]

Hence, the probability that the sum of the numbers appearing on the dice is equal to 6 is 0.1389

Read more about probabilities at:

https://brainly.com/question/10707698

Answer:

His least score for him in the fourth paper has to be 76.

Step-by-step explanation:

Given that Michael has an average of 68% in his 3 papers but that is below the pass mark of 70%, to determine what must be his least score in the fouth paper to enable him pass the following calculation must be performed:

(70 x 4) - (68 x 3) = X

280 - 204 = X

76 = X

Therefore, his least score for him in the fourth paper has to be 76.

Answer:

The proportion of products that exhibit edge roughness is 0.029 = 2.9%.

Step-by-step explanation:

Proportion of products that exhibit edge roughness:

2% of 25%(new blades).

3% of 60%(average sharpness).

4% of 15%(worn). So

[tex]p = 0.02*0.25 + 0.03*0.6 + 0.04*0.15 = 0.029[/tex]

The proportion of products that exhibit edge roughness is 0.029 = 2.9%.

Answer:

the answer could be B i think cause that makes total sense

Answer:

The correct answer is "76.98%".

Step-by-step explanation:

According to the question,

⇒ [tex]P(34000<x<46000) = P[\frac{34000-40000}{5000} <\frac{x- \mu}{\sigma} <\frac{46000-40000}{5000} ][/tex]

                                       [tex]=P(-1.2<z<1.2)[/tex]

                                       [tex]=P(z<1.2)-P(z<-1.2)[/tex]

                                       [tex]=0.8849-0.1151[/tex]

                                       [tex]=0.7698[/tex]

or,

                                       [tex]=76.98[/tex]%

Answer:

[tex]|F'H'| = 2 * |FH|[/tex]

Step-by-step explanation:

Given

[tex]E = (0,1)[/tex]             [tex]E' = (-1,2)[/tex]

[tex]F = (1,1)[/tex]             [tex]F' = (1,2)[/tex]

[tex]G = (2,0)[/tex]             [tex]G' =(3,0)[/tex]

[tex]H = (0,0)[/tex]            [tex]H' = (-1,0)[/tex]

[tex](x,y) = (1,0)[/tex] -- center

[tex]k = 2[/tex] --- scale factor

See comment for proper format of question

Required

Compare FH to F'H'

From the question, we understand that the scale of dilation from EFGH to E'F'G'H is 2;

Irrespective of the center of dilation, the distance between corresponding segment will maintain the scale of dilation.

i.e.

[tex]|F'H'| = k * |FH|[/tex]

[tex]|F'H'| = 2 * |FH|[/tex]

To prove this;

Calculate distance of segments FH and F'H' using:

[tex]d = \sqrt{(x_1 - x_2)^2 + (y_1 - y_2)^2}[/tex]

Given that:

[tex]F = (1,1)[/tex]             [tex]F' = (1,2)[/tex]

[tex]H = (0,0)[/tex]            [tex]H' = (-1,0)[/tex]

We have:

[tex]FH = \sqrt{(1- 0)^2 + (1- 0)^2}[/tex]

[tex]FH = \sqrt{(1)^2 + (1)^2}[/tex]

[tex]FH = \sqrt{1 + 1}[/tex]

[tex]FH = \sqrt{2}[/tex]

Similarly;

[tex]F'H' = \sqrt{(1 --1)^2 + (2 -0)^2}[/tex]

[tex]F'H' = \sqrt{(2)^2 + (2)^2}[/tex]

Distribute

[tex]F'H' = \sqrt{(2)^2(1 +1)}[/tex]

[tex]F'H' = \sqrt{(2)^2*2}[/tex]

Split

[tex]F'H' = \sqrt{(2)^2} *\sqrt{2}[/tex]

[tex]F'H' = 2 *\sqrt{2}[/tex]

[tex]F'H' = 2\sqrt{2}[/tex]

Recall that:

[tex]|F'H'| = 2 * |FH|[/tex]

So, we have:

[tex]2\sqrt 2 = 2 * \sqrt 2[/tex]

[tex]2\sqrt 2 = 2\sqrt 2[/tex] --- true

Hence, the dilation relationship between FH and F'H' is::

[tex]|F'H'| = 2 * |FH|[/tex]

Answer:NOTT !!  A segment in the image has the same length as its corresponding segment in the pre-image.

Step-by-step explanation:

Answer:

If you want the area of something with the sides 14cm and 7cm then it would be 98 cm.

Step-by-step explanation:

Area = length * width

Area = 14 cm * 7 cm

Area = 98 cm

Answer:

1st degree

Step-by-step explanation:

You look at the largest exponet, right here, there are none so it would be 1st degree.

Answer:

1

Step-by-step explanation:

The degree of an expression with multiple exponents is the highest exponent in it. In this expression, there is no expression, so the answer will be 1 because there is no exponent and every variable and number has an invisible 1 as its exponent.

Hope this helps.

Answer:

[tex]{ \tt{slope, \: m = \frac{1 - ( - 1)}{1 - 0} }} \\m = 2 \\ y - intercept : y = mx + c \\ { \tt{1 = (2 \times 1) + c}} \\ c = - 1 \\ { \boxed{ \bf{y = 2x - 1}}}[/tex]

Answer:

A. More students prefer Model A1 calculators than the Model C3 calculators.

Answer:

17 : 27

Step-by-step explanation:

x=3

y=5

4(3)+5 : 6(5)-3

= 12+5 : 30-3

= 17 : 27

Answer:

2+6=8

Step-by-step explanation:

Start at 2

Then since we are adding 6 move 6 units to the right

Answer:

0.0287 = 2.87% probability the total of the 100 claims exceeds 1,530,000.

Step-by-step explanation:

Normal Probability Distribution

Problems of normal distributions can be solved using the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the z-score of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the p-value, we get the probability that the value of the measure is greater than X.

n instances of a normal variable:

For n instances of a normal variable, the mean is [tex]n\mu[/tex] and the standard deviation is [tex]s = \sigma\sqrt{n}[/tex]

Sum of normal variables:

When two normal variables are added, the mean is the sum of the means, while the standard deviation is the square root of the sum of the variances.

Group A follow a normal distribution with mean 10,000 and standard deviation 1,000. 50 claims of group A.

This means that:

[tex]\mu_A = 10000*50 = 500000[/tex]

[tex]s_A = 1000\sqrt{50} = 7071[/tex]

Group B follow a normal distribution with mean 20,000 and standard deviation 2,000. 50 claims of group B.

This means that:

[tex]\mu_B = 20000*50 = 1000000[/tex]

[tex]s_B = 2000\sqrt{50} = 14142[/tex]

Distribution of the total of the 100 claims:

[tex]\mu = \mu_A + \mu_B = 500000 + 1000000 = 1500000[/tex]

[tex]s = \sqrt{s_A^2+s_B^2} = \sqrt{7071^2+14142^2} = 15811[/tex]

Find the probability the total of the 100 claims exceeds 1,530,000.

This is 1 subtracted by the p-value of Z when X = 1530000. So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

By the Central Limit Theorem

[tex]Z = \frac{X - \mu}{s}[/tex]

[tex]Z = \frac{1530000 - 1500000}{15811}[/tex]

[tex]Z = 1.9[/tex]

[tex]Z = 1.9[/tex] has a p-value of 0.9713

1 - 0.9713 = 0.0287

0.0287 = 2.87% probability the total of the 100 claims exceeds 1,530,000.

14. largest 9510

15. smallest 1000000

16. n+6=22 —> n=22-6 —>n = 16

17. Add : 204 + 38429= 38633

Answer:

= 3 11/20

Sorry I am not doing the step by step.

////////////////////////

Answer:

x = -3  or x = 3  or x = 6

Step-by-step explanation:

x3 – 6x2 – 9x + 54 = 0

There is no common factor to factor out. There are 4 terms. We try factoring by grouping. Factor a common factor out of the first two terms. Factor a common factor out of the last two terms.

x^2(x - 6) - 9(x - 6) = 0

x - 6 is a common factor, so we factor it out.

(x^2 - 9)(x - 6) = 0

x^2 - 9 is the difference of 2 squares, so we factor it.

(x + 3)(x - 3)(x - 6) = 0

x + 3 = 0  or  x - 3 = 0  or x - 6 = 0

x = -3  or x = 3  or x = 6

Answer:

x=6     x=3   x=-3

Step-by-step explanation:

x^3 – 6x^2 – 9x + 54 = 0

Factor by grouping

x^3 – 6x^2     – 9x + 54 = 0

x^2(x-6)    -9(x-6 ) =0

Factor out x-6

(x-6)(x^2 -9) =0

Notice x^2 -9 is the difference of squares

(x-6)(x-3)(x+3) = 0

Using the zero product property

x-6 =0    x-3 =0   x+3 =0

x=6     x=3   x=-3

Answer:

c=cost of one chair rental

t=cost of one table rental

8c+3t=42

2c+5t=53

multiply the second equation, each term on both sides, by -4

8c+3t=42

-8c-20t=-212

add the two equations

-17t=-170

divide both sides by -17

t=$10 to rent one table

substitute t=10 into either original equation

2c+5(10)=53

2c+50=53

2c=3

c=$1.50 to rent one chair

Answer:

The answer is below

Step-by-step explanation:

Transformation is the movement of a point from its initial location to a new location. Types of transformation are rotation, reflection, translation and dilation.

If a point A(x, y) is translated a units right and b units up, the new point is at A'(x + a, y + b).

If a point A(x, y) is reflected across the line y = -x, the new point is at A'(-y, -x).

If a point A(x, y) is rotated counterclockwise by 270 degrees, the new point is at A'(y, -x).

Let us assume that triangle ABC has vertices at A(-6, -1), B(-3, -3) and C(-1, -2).

If it is moved 5 units to the right and 2 units up, the new point is at A'(-1, 1), B'(1, -1) and C'(3, 0). If it is reflected across the line y = -x, the vertices are at A"(-1, 1), B"(1, -1) and C"(0, -3). If it is then rotated counterclockwise about the origin by 270°, the new point is at A'"(-1, -1), B"'(1, 1), C"'(3, 0)

AS IN THE PICTURE...........

Answer:

AC = 377.19

Step-by-step explanation:

Since this is a right triangle, we can use trig functions

tan theta = opp /adj

tan 5 = 33/AC

AC tan 5 = 33

AC = 33/ tan 5

AC = 377.19