Encuentre la presion en la otra seccion estrecha si las velocidades en las secciones son de 0.50m\sy 2m\s

Answers

Answer 1

Answer:

ΔP = 1875 Pa,   P₂ = P₁ - 1875

Explanation:

Let's use Bernoulli's equation, with the subscript 1 for the widest Mars and the subscript 2 for the narrowest part, suppose that the pipe is horizontal

          P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂

          P₁ -P₂ = ½ ρ (v₂² - v₁²)

suppose the fluid is water

          P₁ - P₂ = ½ 1000 (2² - 0.5²)

         ΔP = 1875 Pa

this is the pressure difference between the two sections

the pressure in the narrowest section is

           P₂ = P₁ - 1875


Related Questions

Difference between gravitational force and frictional​

Answers

Explanation:

gravitational force or gravity is the force of attraction between objects that have mass.

frictional force is the forec that opposes motion (movement) when two surface are in contact. (acts in the opposite direction of motion)

so to sum it up,

- gravtional force is the force of attraction between objects that have mass.

- objects on the earth have weight because of gravitational force between them and the earth.

frictional force

- oppose motion

- slow down and stop moving objects and;

- produce heat

hope it helps :)

Answer: the difference is that they are 2 completely separate things

D 2. Which of the following is an example of a specific goal?
O I want to lose weight.
I want to get stronger.
O I want to be able to walk one mile in 15 minutes.
I want to improve my speed.

Answers

I want to improve my speed

Answer:

D

Explanation:

A liquid has a density of 2 g/mL, the volume is measured at 20 mL, what is the mass of the liquid?

Answers

Answer: 40 grams, if it is two grams per mL and you have 20 mL, you multiply 2 grams/mL and you get the answer

can someone help me asap please​

Answers

Answer:

Resultant force is 20 N

Explanation:

Resolving vertically:

[tex]{ \sf{F_{y} = (8 \cos 30 \degree) + (12 \cos 30 \degree) }} \\ { \sf{ \sum F_{y} = 17.3 \: newtons }}[/tex]

Resolving horizontally:

[tex]{ \sf{F_{x} = (8 \sin 30 \degree) + (12 \sin 30 \degree) }} \\ { \sf{ \sum F _{x} = 10 \: newtons}}[/tex]

Resultant force:

[tex]{ \boxed{ \bf{F = \sqrt{ {F _{x} }^{2} + {F _{y} }^{2} } }}} \\ { \sf{F = \sqrt{ {17.3}^{2} + {10}^{2} } }} \\ { \sf{F = \sqrt{399.29} }} \\ F = 19.98 \approx20 \: newtons[/tex]

Question 7 of 25
Which two chemical equations are balanced?
O A. 2PBrg + 3Cl2 - 2PC13 + 3Br2
O B. 2Na+ MgCl2
2NaCl + Mg
-
C. 2LIOH + 2H2S - Li2S + 2H20
D. 2AgNO3 + NaCl - NaNO3 + 2AGCI

Answers

Answer:

2PBr₃ + 3Cl₂ → 2PCl₃ + 3Br₂

2Na + MgCl₂ → 2NaCl + Mg

Explanation:

A balanced chemical equation is a chemical equation that have an equal number of elements of each type on both sides of the equation

Among the given chemical reactions, we have;

2PBr₃ + 3Cl₂ → 2PCl₃ + 3Br₂

In the above reaction;

The number of phosphorus, P, on either side of the equation = 2

The number of bromine atoms, Br, on either side of the equation = 6

The number of chlorine atoms, Cl, on either side of the equation = 6

Therefore, the number of elements in the reactant side and products side of the reaction are equal and the reaction is balanced

The second balanced chemical reaction is 2Na + MgCl₂ → 2NaCl + Mg

In the above reaction, there are two sodium atoms, Na,  one magnesium atom and two chlorine atoms on both sides of the reaction, therefore, the reaction is balanced

2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.

Answers

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

What is the centripetal acceleration of a point on the perimeter of a bicycle wheel diameter 70.0 cm when the bike is moving 8.0 m/s? (160 m/s)

Answers

It’s 180 m/s^2 dude. I think I have you in my class lol.

The centripetal acceleration of an object is due to the changing velocity in a circular path and the centripetal acceleration of the bicycle is 182.85 m/s².

What is Centripetal acceleration?

Centripetal acceleration of an object can be defined as the property of the motion of an object which is traversing a circular path. Any object which is moving in a circular path and has an acceleration vector pointed towards the center of that circular path is known as Centripetal acceleration.

The centripetal acceleration of an object can be calculated by the formula:

ac = v²/ r

where, ac = centripetal acceleration,

v = velocity of the object,

r = radius of the circular path

The centripetal acceleration of the object will be:

ac = (8)²/ r

radius = diameter/ 2

radius = 70/ 2

radius = 35cm or 0.35 m

ac = 64/ 0.35

ac = 182.85 m/s²

Therefore, the centripetal acceleration of the bicycle will be 182.85 m/s².

Learn more about Centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ2

Tick (3) the correct statement about electrostatic charges.
(a) Earthing causes positive charges to flow from the object to the ground.
(b) Similar types of electric charges attract one another.
(c) An electroscope is used to determine the presence of electrostatic charges.

Answers

Answer:

similar type of electric charges attract one another

I think this is a coorect staement

Answer:

C ) An electroscope is used to determine the presence of electrostatic charges

A 210 Ohm resistor uses 9.28 W of power. How much current flows through the resistor? (unit=A)

Answers

Answer:

.21

Explanation:

i see everyone got it wrong so ill give you the answer, good luck :)

86,400 seconds into day​

Answers

Answer:

60×60×24=86,400

Explanation:

i.e. 86,400 secs is 1 day

1 hour = 60 minutes

1 minute = 60 seconds

1 day = 24 hours

60 min. × 60 sec. × 24 hr.

60 × 60 × 24 = 86,400 seconds

∴ 86,400 seconds = 1 day

Clois what is the weight of a body in the earth, if its weig is 5Nin moon?

Answers

Explanation:

because the moon has less mass than earth, the force due to gravity at the lunar surface is only about 1/6 that on earthso,the weight of a body on earth is 6×5N =30N

A simple machine has efficiency 90%. What does it mean? No machine has 109 efficiency,why?​

Answers

Answer:

Efficiency of a machine is 90% this means that the total energy produced to the machine only 90% is useful and given as a output.

Machines are not 100% efficient because some of the work done by a machine is used to overcome friction

Given: F = k· m. g
Solve for "k"

Answers

Answer:

[tex]F = kmg \\ k = \frac{F}{mg} [/tex]

Explanation:

F = k . m . g

=> F = k . mg

[tex] = > k = \frac{F}{mg} (ans)[/tex]

In a lunar experiment, a 950-g aluminum (920 J/(°Ckg)) sphere is dropped from the space probe while is 75 m above the Lunar ground. If the sphere’s temperature increased by 0.11°C when it hits the ground, what percentage of the initial mechanical energy was absorbed as thermal energy by the aluminum sphere?

Answers

Answer:

13.759 % of the initial mechanical energy is lost as thermal energy.

Explanation:

By the First Law of Thermodynamics we know that increase in internal energy of the object ([tex]U[/tex]), in joules, is equal to the lost amount of the change in gravitational potential energy ([tex]U_{g}[/tex]), in joules:

[tex]\frac{x}{100} \cdot \Delta U_{g} = \Delta U[/tex] (1)

Where [tex]x[/tex] is the percentage of the energy loss, no unit.

By definition of the gravitational potential energy and internal energy, we expand this equation:

[tex]\frac{x\cdot m \cdot g \cdot h}{100} = m\cdot c\cdot \Delta T[/tex] (1b)

Where:

[tex]m[/tex] - Mass of the object, in kilograms.

[tex]g[/tex] - Gravitational acceleration, in meters per square second.

[tex]h[/tex] - Initial height of the object above the lunar ground, in meters.

[tex]c[/tex] - Specific heat of aluminium, in joules per degree Celsius-kilogram.

[tex]\Delta T[/tex] - Temperature increase due to collision, in degree Celsius.

If we know that [tex]m = 0.95\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]h = 75\,m[/tex], [tex]c = 920\,\frac{J}{kg\cdot ^{\circ}C}[/tex] and [tex]\Delta T = 0.11\,^{\circ}C[/tex], then the percentage of energy loss due to collision is:

[tex]x = \frac{100\cdot c\cdot \Delta T}{g\cdot h}[/tex]

[tex]x = \frac{100\cdot \left(920\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (0.11\,^{\circ}C)}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (75\,m)}[/tex]

[tex]x = 13.759\,\%[/tex]

13.759 % of the initial mechanical energy is lost as thermal energy.

why Fossil fuel has been used more in the existing world ?​

Answers

Fossil fuels are found most of the part of the world .It can be found easily by the people.It is free of cost or low cost.Thats why people can find it easily and in low cost.Also it is easy to useSo fossil fuel has been used more in existing world

why does apparent depth of different liquids vary

Answers

It’s due to the refraction of light rays as they traverse the boundary between water and air. The greater the viewing angle, the more the bending of the light and therefore the less the apparent depth. An object placed in a denser medium, when viewed from rarer medium appears to be at a lesser depth than its real depth due to refraction of light.

factor that affect gravitation

Answers

1) Two major factors, mass and distance, affect the strength of gravitational force on an object.

2) Most common factors that affect gravity are mass of the body, distance from centers, shape of bodies,etc. Gravity is a binding force, always acting to bind any material closure and closure inwards. If we think this way, then gravity is maximum at its centre and decreases slowly away from its centre.

hope it helps you

mark my answer as brainlist and follow

have a nice day

.............................

Answers

Dot, dot, dot, dot, lol

(9x10^2) + (1x10^2)
10x10^4
10x10^3
1x10^4
1x10^3

Answers

Answer:

10 x 10⁴

I hope it's helps you

Answer:

Yes

Explanation:

3. Take sugar, oil, corn syrup, a glass and water. Pour the water in the glass and then add each of the above the substances one after the other. Observe and note your observations. And give reason for your observation.

Answers

Here are the observations

Sugar:-

Sugar is soluble in water so It will dissolve in water .

Corn syrup:-

Corn syrup is also basically a sugar.It will dissolve in water too .If we shake the mixture in glass then corn syrup will be dissolved.

Oil:-

Oil is not soluble in waterHence it won't dissolve in water.It will float over water and make two layers

A body having uniform velocity has zero acceleration? give reason​

Answers

Answer:

A body having uniform velocity has zero acceleration because

there is not change in velocity.

A ball is dropped from the roof of a 25-m-tall building. What is the velocity of the object when it touches the ground? Suppose the ball is a perfect golf ball and it bounces such that the ve locity as it leaves the ground has the same magnitude but the op posite direction as the velocity with which it reached the ground How high will the ball bounce? Now suppose instead that the ball bounces back to a height of 20 m. What was the velocity with which it left the ground?

Answers

Answer:

a)  [tex]h=25m[/tex]

b)  [tex]v=19.8m/sec[/tex]

Explanation:

From the question we are told that:

Height [tex]h=25m[/tex]

Bounce Height [tex]h'=20m[/tex]

Generally the Kinematic equation is mathematically given by

[tex]V=\sqrt{2gh}\\\\V=\sqrt{2*9.81*25}[/tex]

[tex]V=22.1m/sec[/tex]

Therefore Height

[tex]h=\frac{V^2}{2g}\\\\h=\frac{22.1^2}{2*9.81}[/tex]

[tex]h=25m[/tex]

b)

Generally the Kinematic equation is mathematically given by

[tex]v^2=2ah[/tex]

[tex]v^2=2*9.8*20[/tex]

[tex]v=\sqrt{2*9.8*20}[/tex]

[tex]v=19.8m/sec[/tex]

A skipper on a boat notices wave crests passing his anchor chain every 5.6 s . He estimates the distance between wave crests to be 16 m . He also correctly estimates the speed of the waves. Find this speed.

Answers

Answer:

v = 2.85 m/s

Explanation:

Given that,

A skipper on a boat notices wave crests passing his anchor chain every 5.6 s.

The distance between wave crests to be 16 m.

We need to find the speed of the waves. The speed of a wave can be calculated by the formula as follows :

[tex]v=f\lambda\\\\v=\dfrac{\lambda}{T}\\\\v=\dfrac{16}{5.6}\\\\v=2.85\ m/s[/tex]

So, the speed of the wave is 2.85 m/s.

in a cathode-ray tube, particles are fired at the screen. What are these particles

Answers

Thomson's experiments with cathode ray tubes showed that all atoms contain tiny negatively charged subatomic particles or electrons.

Ploughing field with harrow pulled by a tractor is a modern technology​

Answers

Ploughing field with harrow pulled by a tractor being a modern technology​ is true.

What is Technology?

This involves the use of scientific knowledge to tackle different life problems and has different sectors.

Ploughing field with harrow pulled by a tractor involves machines and not manual labour which makes it a modern technology.

Read more about Technology here https://brainly.com/question/7788080

#SPJ1


State one effect of increase in heat for a temperature range of 50°C to 100°C
on Plastic

Answers

Answer:

why is fraction called a necessary evil

The heat for a temperature in plastic increases at the range of 50°C to 100°C then the plastic decreases its stiffness or flexural modulus.

It is given that the temperature is increased from 50°C to 100°C that means temperature is increasing.

It is required to state the effect of increase in heat on plastic.

What will be the effect of increase in heat for a temperature range of 50°C to 100°C on Plastic?

The plastic starts to lose its stiffness or we say that it converts into a softened material as long as we increase the temperature of the material.

So if we increase the temperature too much or exceed above the limit of temperature range then it will distort.

Also there are many qualities that can be affected by increasing the temperature like mechanical property, material fatigue or chemical phenomenon.

Therefore, the heat for a temperature range of 50°C to 100°C

Plastic increases then the plastic decreases its stiffness or flexural modulus.

Learn more about the range of temperature here:

https://brainly.com/question/11316625

#SPJ5

define Archemedics principle?​

Answers

THIS IS YOUR ANSWER :

Archimedes’ principle, physical law of buoyancy, discovered by the ancient Greek mathematician and inventor Archimedes, stating that any body completely or partially submerged in a fluid (gas or liquid) at rest is acted upon by an upward, or buoyant, force, the magnitude of which is equal to the weight of the fluid displaced by the body.

☺✍️HOPE IT HELPS YOU ✍️☺

Assuming Faraday constant to be 96500c/mol and relative atomic mass of copper 63,calculate the mass of copper liberated by 2A current in 5min.ans 0.196gm ​

Answers

Answer: The mass of copper liberated is 0.196 g.

Explanation:

The oxidation half-reaction of copper follows:

[tex]Cu\rightarrow Cu^{2+}+2e^-[/tex]

Calculating the theoretical mass deposited by using Faraday's law, which is:

[tex]m=\frac{M\times I\times t(s)}{n\times F}[/tex] ......(1)

where,

m = actual mass deposited = ? g

M = molar mass of metal = 63 g/mol

I = average current = 2 A

t = time period in seconds = 5 min = 300 s (Conversion factor: 1 min = 60 sec)

n = number of electrons exchanged = 2

F = Faraday's constant = 96500 C/mol

Putting values in equation 1, we get:

[tex]m=\frac{63 g/mol\times 2A\times 300s}{2\times 96500 C/mol}\\\\m=0.196g[/tex]

Hence, the mass of copper liberated is 0.196 g.

1. Una carga Q1 = + 12 μC se coloca a una distancia r = 0.024 m desde una carga Q2 = + 16 μC. a) Determina la magnitud de la fuerza electrostática que actúa sobre las dos cargas, Q1 y Q2. b) ¿Es la fuerza la atracción o repulsión? 2. Determina la intensidad del campo eléctrico a una distancia radial de r = 48 mm desde una carga de Q = 24 μC. 3. Una carga Q1 = 24 mC se coloca a una distancia r = 0.032 m desde una carga Q2 = - 12 μC. a. Determina la cantidad de energía potencial eléctrica que tiene la carga Q1. b. Determina el potencial eléctrico en la posición de Q2.

Answers

Answer:

1. a. 3,000 N

b. Repulsión

2. 46.875 × 10⁶ N/C

3. a. 81,000 J

b. 6.75 × 10⁹ V

Explanation:

1. Los parámetros dados son;

Q₁ = +12 μC, Q₂ = +16 μC

La distancia entre las cargas, r = 0.024

La magnitud de la fuerza electrostática, F, entre cargas se da como sigue;

[tex]F = k \times \dfrac{Q_1 \cdot Q_2}{r^2}[/tex]

Donde, k = constante de Coulomb = 9.0 × 10⁹ N · m² / C²

Por lo tanto, obtenemos;

F = 9.0 × 10⁹ × 12 × 10⁻⁶ × 16 × 10⁻⁶ / 0.024² = 3.000

La magnitud de la fuerza electrostática, entre las cargas, F = 3000 N

(b) Dado que tanto Q₁ como Q₂ son cargas positivas, y las cargas iguales se repelen entre sí, la fuerza es la repulsión.

2) La intensidad de un campo eléctrico, E, se da como sigue;

[tex]E = \dfrac{k \cdot Q}{r^2}[/tex]

La magnitud de la carga, Q = 24 μC

La distancia donde se mide el campo, r = 48 mm = 0.048 m

Por lo tanto, E = 9.0 × 10⁹ × 12 × 10⁻⁶ / 0.048² = 46,875,000 N / C

La intensidad de un campo eléctrico, E = 46,875,000 N / C = 46.875 × 10⁶ N / C

3. La magnitud de las cargas son;

Q₁ = 24 mC

Q₂ = -12 μC

La distancia entre las cargas, r = 0.032 m

un. El potencial eléctrico de una carga, [tex]U_E[/tex] , se da de la siguiente manera;

[tex]U_E = k \times \dfrac{Q_1 \cdot Q_2}{r}[/tex]

Por lo tanto;

[tex]U_E[/tex] = 9.0×10⁹ × 24 × 10⁻³ × (-12) × 10⁻⁶ /0.032 = -81,000

La energía potencial eléctrica entre la carga, Q₁ y Q₂= -81,000 J

b. El potencial eléctrico de Q₁ en Q₂, V₁ = [tex]k \times \dfrac{Q_1 }{r}[/tex]

Por lo tanto, V₁ = 9.0×10⁹ × 24 × 10⁻³/0.032 = 6.75 × 10⁹

El potencial eléctrico de Q₁ en Q₂, V₁ = 6.75 × 10⁹ V

is placing a compass near a wire with live electrical current biology, chemistry, or physics?

Answers

The process of PLACING a compass wherever you want it involves Biology.  Biology deals with everything that has to happen for your brain to send instructions to your muscles, your muscles to operate your arm and your hand, and your hand to move the compass to where you want it, while your eyes keep track of what's happening and send course-corrections through your brain.

Once you get the compass there and see it start doing strange things, those EFFECTS are explained by laws of nature that are covered in Physics.

Placing a compass near a wire with live electrical current involves physics. Because, the deflection in magnetic field by the current from the electrical wire is dealt with physics.

What is magnetic field ?

A magnetic field is generated by the field lines originating from a magnet or an electrical  coil. The moving current is always associated with a magnetic field.

A compass acts as a tiny magnet and it deflects to the north in  the absence of an electrical field. If an electric field is brought in contact with the compass the needle will deflect into the direction of the magnetic field from the wire.

The strength of a magnetic field, associated electric field, magnetic flux etc. are more focused in the branches of physics. The magnetic properties of a substance is a physical property.

Find more on magnetic properties:

https://brainly.com/question/4242549

#SPJ2

Other Questions
How does Lincoln show the contrasts between America four years earlier and America at the time of his address? What might his motives have been for pointing out these differences? How does emphasizing the changes that have taken place in America strengthen his argument? Now- a quick question. Assume at the beginning of Year2, Becker Company has a credit (positive) balance in the AOCI account of $10800. Becker Company reports $653000 of net income for Year2. Becker has an unrealized gain of $12000 during Year2. The gain qualifies as OCI (Other comprehensive income). 1. What will Becker report as Accumulated Other Comprehensive Income on the Year2 balance sheet ways to improve games and sports Can you answer this math homework? Please! who led mexican rebles against the spanish after miguel hidalgo in 1811? please answer me my question I need the answer to this what is approximately unit price for 1 g of organic green seedless grapes if it costs 6.49 for 400g? Question 26 (1 point)By enclosing lines 6 to 11 in parentheses, the main impression that thewriter creates is one of- an expression of excitement- an act of reverence- a humorous interjection- a personal aside define the following terms of domestication Write a Java program to create a class called Cars. The class should include three instance variables: makes (type: String), models (type: String), and years (type: int); and two methods: a constructor() to initialize three variables and a show() to display the information of a car. Write a class called TestCars to test the class Cars. This class should be able to read the makes, models, and years of three cars from screen input, create three-car objects using the constructor() and display each car's make, model, and years using the show(). (5pts) 1. Cundo se habla de clima con que lo relacionas.2. Describe cada uno de los fenmenos atmosfricos que se encuentran en la ilustracin.3. Cmo son las condiciones de temperatura y de vientos que se presentan en el lugar en que te encuentras en este momento?Crees que estas condiciones pueden cambiar ms tarde? Por qu?4. Explica cmo es el clima de tu regin. Cmo influye en la forma de vida de los habitantes de tu regin?5. Explica con un ejemplo la diferencia entre estado de tiempo atmosfrico y clima.6. Elabora un mapa conceptual, en el que resaltes las principales caractersticas de los elementos del clima.7. Explica cmo la hora del da y la presencia o ausencia de vegetacin influye sobre la temperatura.8. Segn lo anterior, dnde se siente ms calor, en el campo o en la ciudad? Explica tu respuesta.9. Segn el grfico (zonas de latitudes), por qu en la zona ecuatorial se presentan altas temperaturas durante todo el ao?10. En qu zona de latitud se encuentra nuestro pas? De acuerdo a esta ubicacin, describe las caractersticas climticas generales.11. Qu tipos de clima predominan en nuestro pas? Cmo influyen estos climas en la vida de los colombianos?12. Cul es el tipo de clima de tu departamento?13. Cmo se relaciona el tipo de clima de tu departamento con las actividades que se desarrollan en l? please help mee!! The predicate of a sentence is.... Which of these is an example of how the media might perpetuate a sexual stereotype Complete the missing parts of thetable for the following function. (picture) please answer all asap the polygons in each pair are similar. find the missing side length. Solve 60 5(1 + 1(1 + 1)) Why did Dimitri most likely get the flu? Vaccinations are not always effective. Vaccinations are not effective if hygiene is poor. Vaccinations give individuals the flu with full symptoms. Vaccinations work only when provided at the onset of the disease. 9. what is the measure of QSR What problems are to be faced in absence of transport facilities