So, we know the reduction potentials of the electrodes :
Electrode A = -0.21 V
Electrode B = -0.15 V
We want our cell to be spontaneous - this means that the voltage has to be positive. In order to do so, we need to turn the more negative reduction half reaction to be an oxidation half reaction.
-0.21 is more negative than -0.15, so electrode A will be the oxidation half reaction.
Anode is where the oxidation half reaction takes place, so electrode A is the correct answer . A fun way to remember this is An(ode)Ox(idation) = AnOx and Red(uction)Cat(hode) = RedCat
The E° cell will be 0.21 -0.15 V = 0.6 V
5.96 g of ammonia reacts completely according to the following reaction:
2 NH, (g) + Co, (g) → CN,OH, (s) + H20 (1)
(a) What is the theoretical yield of urea (CN,OH,) for this reaction?
(b) If 13.74 g of urea are produced, what is the percent yield for this equation?
please show work, will give brainliest
Explanation:
this explanation may help u to understand:)
Having enough folic acid in your system by the early weeks of pregnancy is critical to prevent spina bifida.
Answer:
Yes.
Explanation:
Yes, enough folic acid in the body by the early weeks of pregnancy helps to prevent spina bifida. The body of woman uses folate during the pregnancy which produces red and white blood cells that help your baby to grow. Folate also lowers the risk of neural tube defect (NTD) in the unborn baby. Neural tube defect (NTDs) are the serious birth defects that greatly affect the spinal cord, brain and skull of the baby.
(a) Describe the process by which Nitrogen is obtained from air on a large scale
The element nitrogen exists as a gas and is obtained from air on a large scale by fractional distillation of air.
What is an element?An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ2
13. What does the Law of Conservation of Mass state?
Which compound is insoluble in water?
Answer:
The answer is C... I am almost positive.
Gamma rays have the highest frequency among all common electromagnetic radiations. It means the gamma rays have the highest energy and the longest wavelength
Answer:
yes
Explanation:
cos of high electron transfer
It took 2.30 minutes using a current of 3.00 A to plate out all the copper from 0.300 L of a solution containing Cu2 . What was the original concentration of Cu2
Answer:
7.16 × 10⁻³ M
Explanation:
Let's consider the reduction reaction of copper during the electroplating.
Cu²⁺(aq) + 2 e⁻ ⇒ Cu(s)
We can calculate the moles of Cu²⁺ present in the solution using the following relations.
1 A = 1 C/s.1 min = 60 s.1 mole of electrons has a charge of 96486 C (Faraday's constant).1 mole of Cu²⁺ is reduced when 2 moles of electrons are gained.The moles of Cu²⁺ reduced are:
[tex]2.30 min \times \frac{60s}{1min} \times \frac{3.00C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molCu^{2+} }{2mole^{-} } = 2.15 \times 10^{-3} molCu^{2+}[/tex]
[tex]2.15 \times 10^{-3} moles[/tex] of Cu²⁺ are in 0.300 L of solution.
[Cu²⁺] = 2.15 × 10⁻³ mol/0.300 L = 7.16 × 10⁻³ M
Describe the three freezing points. Is there a relationship between the amount of solute in the solution and the freezing temperature
Answer:
The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.
Explanation:
In this lab, you will be making solutions of potassium permanganate (KMnO4), which has a formula weight of 158.04 g/mole. Remember to show your calculations and include tne Correct unnits in your answers
a) How many grams of KMnO4 would you need to make 1 L of a 2M solution?
b) How many grams of KMnO4 would you need to make 350 mL of a 0.75 M solution?
c) How many grams of KMnO4 would you need to make 80 mL of a 0.01 M solution?
Answer:
A. Mass of KMnO₄ = 316.08 g
B. Mass of KMnO₄ = 41.49 g
C. Mass of KMnO₄ = 0.13 g.
Explanation:
A. Determination of the mass of KMnO₄
We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:
Volume = 1 L
Molarity = 2 M
Mole of KMnO₄ =?
Mole = Molarity × Volume
Mole of KMnO₄ = 2 × 1
Mole of KMnO₄ = 2 moles
Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:
Mole of KMnO₄ = 2 moles
Molar mass of KMnO₄ = 158.04 g/mole
Mass of KMnO₄ =?
Mass = mole × molar mass
Mass of KMnO₄ = 2 × 158.04
Mass of KMnO₄ = 316.08 g
B. Determination of the mass of KMnO₄
We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:
Volume = 350 mL = 350/1000 = 0.35 L
Molarity = 0.75 M
Mole of KMnO₄ =?
Mole = Molarity × Volume
Mole of KMnO₄ = 0.75 × 0.35
Mole of KMnO₄ = 0.2625 mole
Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:
Mole of KMnO₄ = 0.2625 mole
Molar mass of KMnO₄ = 158.04 g/mole
Mass of KMnO₄ =?
Mass = mole × molar mass
Mass of KMnO₄ = 0.2625 × 158.04
Mass of KMnO₄ = 41.49 g
C. Determination of the mass of KMnO₄
We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:
Volume = 80 mL = 80/1000 = 0.08 L
Molarity = 0.01 M
Mole of KMnO₄ =?
Mole = Molarity × Volume
Mole of KMnO₄ = 0.01 × 0.08
Mole of KMnO₄ = 0.0008 mole
Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:
Mole of KMnO₄ = 0.0008 mole
Molar mass of KMnO₄ = 158.04 g/mole
Mass of KMnO₄ =?
Mass = mole × molar mass
Mass of KMnO₄ = 0.0008 × 158.04
Mass of KMnO₄ = 0.13 g
Kristy finds the mass of an object to be 20 grams and the volume to be 10 mL. What is the density of the object? (don't send me links, just give a straight answer)
someone answer please
Answer:
A
Explanation:
Doc. No.
QMS
Rev. Date
1. In the reaction
P
> M + N
a) The reactants are:
b) The products are:
Answer: In the reaction:
a) The reactants are: P
b) The products are: M and N
Explanation:
The given reaction equation is as follows.
[tex]P \rightarrow M + N[/tex]
Reactants are the species present on the left side on an arrow in a chemical reaction equation.
On the other hand, products are the species which are present on the right side of an arrow in a chemical reaction equation.
Hence, in the given reaction equation P is the reactant. Whereas M and N are the products.
Thus, we can conclude that in the reaction:
a) The reactants are: P
b) The products are: M and N
Identify each of the following as endothermic or exothermic.
a. Water in a pond evaporates.
b. Methane gas burns on a stove top.
c. Water freezes to form ice.
d. Energy flows from the system to the surroundings.
e. Energy flows from the surroundings to the system.
Answer:
Identify each of the following as endothermic or exothermic.
a. Water in a pond evaporates.
b. Methane gas burns on a stovetop.
c. Water freezes to form ice.
d. Energy flows from the system to the surroundings.
e. Energy flows from the surroundings to the system.
Explanation:
An exothermic reaction is the one in which heat energy is released.
An endothermic reaction is one in which heat energy is absorbed.
a. Water in a pond evaporates.
This process absorbs heat energy.
Hence, this is an example of an endothermic process.
b. Methane gas burns on a stovetop and release heat energy and hence this is an example of an exothermic reaction.
c. Water freezes to form ice.
In this process heat energy is released.So this is an example of exothermic reaction.
d. Energy flows from the system to the surroundings.
That means heat energy is released into the surroundings.
So, this is an example of exothermic process.
e. Energy flows from the surroundings to the system.
That means energy is absorbed by the system.
So, it is an endothermic process.
What are the laws and calculations governing gas behavior?
Answer:
Laws governing gas behavior.
Explanation:
Boyle's law:
It relates the pressure and volume of an ideal gas at a constant temperature.
According to this law:
"The volume of a fixed amount of gas at constant temperature is inversely proportional to its pressure".
[tex]P \alpha V[/tex].
Charle's law:
It relates the volume and absolute temperature of an ideal gas at a constant pressure.
According to this law:
"The volume of a fixed amount of gas at constant pressure is directly proportional to its absolute temperature".
[tex]V \alpha T[/tex].
Avogadro's law:
According to this law:
equal volumes of all gases under the same conditions of temperature and pressure contain, an equal number of moles.
[tex]V \alpha n[/tex].
Ideal gas equation:
By combining all the above-stated gas laws, this equation is formed as shown below:
[tex]V \alpha \frac{nT}{P} \\=> V= R. nT/ P\\=>PV=nRT[/tex]
R is called universal gas constant.
It has a value of 0.0821L.atm.mol-1.K-1.
Answer:
Boyle's law, Charle's law, Guy Lussac's law and Avogadro's law
Explanation:
All the gases behaves similarly when the environment conditions are normal. But when the physical condition changes like when the pressure, volume or temperature changes, the gas behaves differently and shows a deviation.
The number of gas laws are :
Boyle's Law
Boyle's law states that when the temperature remaining constant, the pressure of the gas varies inversely to the volume of the gas.
i.e. [tex]P \propto \frac{1}{V}[/tex]
Charle' law
Charle's law states that when pressure is constant, the temperature of a gas is directly proportional to the volume.
i.e. , [tex]$T \propto V$[/tex]
Gay Lussac's law
Gay - Lussa law states the volume and the mass of the pressure of the gas is directly proportional to the temperature of the gas.
i.e. P.T = constant
Avogadro's law
It states that under the conditions of same pressure as well as temperatures, the gases having equal volumes will have same numbers of molecules.
i.e. [tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex] = constant
g Suppose you are titrating an acid of unknown concentration with a standardized base. At the beginning of the titration, you read the base titrant volume as 1.84 mL. After running the titration and reaching the endpoint, you read the base titrant volume as 27.30 mL. What volume, in mL, of base was required for the titration?
Answer:
25.46 mL
Explanation:
In a titration we use the volume and concentration of a solution to determine the previously unknown concentration of other solution. Let's consider the titration of an acid of unknown concentration with a standardized base (a base whose concentration we know). The generic neutralization reaction is:
HA + BOH ⇒ BA + H₂O
The base is in the buret and we will add it to the acid until the equivalence point is reached. The volume of base used is equal to the difference between the final reading of the buret and the initial reading of the buret.
V = 27.30 mL - 1.84 mL = 25.46 mL
HELPPPPPPPPPPPPMEEEEEEEEEE
Answer:
25%
Explanation:
Cystic fibrosis is a recessive allele, meaning that the child must be aa to suffer the symptoms. Only 1/4 of the paired alleles is aa, so the probability of getting cystic fibrosis would be 25%.
Zinc sulfate is a 2-ion electrolyte,
dissociating 40% in a
certain concentration. Calculate its
dissociation (i) factor.
On the basis of 40% dissociation, 100
particles of zinc sulfate
will yield:
40zinc ions
40 sulfate ions
60undissociated particles
Jo 11:03
Answer: The value of i is 1.4 and 40% dissociation of 100 particles of zinc sulfate will yield 60 undissociated particles.
Explanation:
The equation used to calculate the Vant' Hoff factor in dissociation follows:
[tex]\alpha =\frac{i-1}{n-1}[/tex]
where,
[tex]\alpha [/tex] = degree of dissociation = 40% = 0.40
i = Vant' Hoff factor
n = number of ions dissociated = 2
Putting values in above equation, we get:
[tex]0.40=\frac{i-1}{2-1}\\\\0.40=i-1\\\\i=1.4[/tex]
The equation used to calculate the degee of dissociation follows:
[tex]\alpha =\frac{\text{Number of particles dissociated}}{\text{Total number of particles taken}}[/tex]
Total number of particles taken = 100
Degree of dissociation = 40% = 0.40
Putting values in above equation, we get:
[tex]0.40=\frac{\text{Number of particles dissociated}}{100}\\\\\text{Number of particles dissociated}=(0.40\times 100)=40[/tex]
This means that 40 particles are dissociated and 60 particles remain undissociated in the solution.
Hence, 40% dissociation of 100 particles of zinc sulfate will yield 60 undissociated particles.
True or false? All producers are at the top of the food web
Answer:
false all producers are at the top of food web
Determine the number of significant digits in each number and list the specific significant digits. 1. 306,000 2. 0.0073 3. 39.9999 4. 25.00 5. 40,000,021 6. 45,250.0 7. 0.00011 8. 420.030700
Answer:
1. 306,000: three significant figures because the last three zeros are not preceded by a decimal point.
2. 0.0073: two significant figures because the the leftmost zeros are not significant.
3. 39.9999: six significant figures because all these numbers are nonzero digits.
4. 25.00: four significant figures because right-handed zeros, after a decimal point, are significant.
5. 40,000,021: eight significant figures because intermediate zeros are significant.
6. 45,250.0: six significant figures because al the zeros are to the right of the nonzero digits.
7. 0.00011: two significant figures as well as #2.
8. 420.030700: nine significant figures because all the zeros are to the right of the first nonzero digits and after the decimal point.
Explanation:
Hello there!
In this case, by considering the given numbers, we can proceed as follows, by keeping in mind the rules for assigning significant figures:
1. 306,000: three significant figures because the last three zeros are not preceded by a decimal point.
2. 0.0073: two significant figures because the the leftmost zeros are not significant.
3. 39.9999: six significant figures because all these numbers are nonzero digits.
4. 25.00: four significant figures because right-handed zeros, after a decimal point, are significant.
5. 40,000,021: eight significant figures because intermediate zeros are significant.
6. 45,250.0: six significant figures because al the zeros are to the right of the nonzero digits.
7. 0.00011: two significant figures as well as #2.
8. 420.030700: nine significant figures because all the zeros are to the right of the first nonzero digits and after the decimal point.
Regards!
Which of the following explains the high boiling
point of water?
a Surface tension
b Polarity
C Capillary action
d Hydrogen bonding
Answer:
The correct answer is - d. hydrogen bonding.
Explanation:
Water has strong hydrogen bonds between its molecules that require a very high amount of energy in order to break. Water molecules are joined together or bound with a strong intermolecular force called hydrogen bonds.
These bonds require more kinetic energy which means more temperature or heat in order to break the bonds and turn into steam and this is the reason it has a high boiling point.
The table shows the recipe and the available ingredients for making the maximum possible number of sandwiches.
Making Sandwiches
Recipe for One Sandwich:
2 cheese slices, 1 ham slice, 2 bread slices
Ingredients Available:
12 cheese slices, 10 ham slices, 12 bread slices
If the ingredients represent reactants of a chemical reaction, which of the following represents the leftover reactant?
A. 2 ham slices
B. 4 ham slices
C. 2 cheese slices
D. 4 cheese slices
Answer:
B. 4 ham slices
Explanation:
A chemical reaction involves one or more substances known as reactants combining chemically to give one or more substances known as products.
Reactants in chemical reactions combine in definite mole or mass ratios to give products. Therefore, when one substance is present in excess of what is required to combine with another to form products, that substance is known as the excess reagent. The other substance which is present in a smaller amount and which when used up, the reaction stops is known as the limiting reagent.
From the illustration of the sandwiches in the question, the recipe for one sandwich represents the chemical equation of a reaction. The equation form is given below:
2 cheese slices + 1 ham slice + 2 bread slices ---> 1 sandwich
The ratio of the reactant is 2 : 1 : 2
From the available ingredients, 12 cheese slices, 10 ham slices, 12 bread slices.
12 cheese slices will require 6 ham slices and 12 bread slices to produce 6 sandwiches.
However, since there are 10 ham slices, 4 ham slices will be left over unused. This is the excess or leftover reactant.
Answer:
B. 4 ham slices
Explanation:
Got it right on the test
Calculate the amount of heat required to completely sublime 55.0 g of solid dry ice CO2 at its sublimation temperature. The heat of sublimation for carbon dioxide is 32.3 kj mol
Answer:
40.4 kJ
Explanation:
Step 1: Given data
Mass of CO₂ (m): 55.0 gHeat of sublimation of CO₂ (ΔH°sub): 32.3 kJ/molStep 2: Calculate the moles corresponding to 55.0 g of CO₂
The molar mass of CO₂ is 44.01 g/mol.
n = 55.0 g × 1 mol/44.01 g = 1.25 mol
Step 3: Calculate the heat (Q) required to sublimate 1.25 moles of CO₂
We will use the following expression.
Q = n × ΔH°sub
Q = 1.25 mol × 32.3 kJ/mol = 40.4 kJ
Describe the buffer capacity of the acetic acid buffer solution in relation to the addition of both concentrated and dilute acids and bases. Reference the results in Data Tables 1,2,3, and 4 in your answer.
Answer:
The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.
Explanation:
Buffer capacity is defined as the moles of an acid or base that are needed to change the pH of a buffer in 1 unit.
A more concentrated solution of acetic buffer contains more moles of the acid per liter of solution. A solution that contains more moles of the acetic ion or the acetic acid requires more moles of base or acid to change the pH, that means:
The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.
The value of ΔH° for the reaction below is -6535 kJ. ________ kJ of heat are released in the combustion of 16.0 g of C6H6 (l)?
2C6H6 (l) + 15O2 (g) → 12CO2 (g) + 6H2O (l)
Answer:
the value of H° is below -6535 kj. +6H2O
Explanation:
6H2O answer solved
For the given reaction, 2 moles of C₆H₆ the heat energy released is - 6535 KJ. Then, for 16 g of the compound or 0.205 moles needs 669.83 KJ of heat released in combustion.
What is combustion ?Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, typically oxygen, resulting in the release of heat, light, and various combustion products, such as carbon dioxide and water vapor.
The process of combustion involves a rapid and exothermic (heat-releasing) oxidation reaction that produces a flame, which is visible in many cases.
Here, 2 moles of the hydrocarbon releases - 6535 KJ of energy.
molar mass of C₆H₆ = 78 g/mol
then no.of moles in 16 g = 16 /78 = 0.205 moles.
then energy released by 0.205 moles = 0.205 moles × 6535 KJ /2 moles = 669.83 kJ
Therefore, the heat energy released by 16 g of the compound in combustion is 669.83 kJ.
Find more on combustion :
https://brainly.com/question/13153771
#SPJ2
Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coat the metal preventing it from further oxidation. Which of the following is the correct balanced equation for the reaction?
a. Al(s) + 302(g) → 2903(s).
b. 2Al(s) + O2(g) → 2A10(s).
c. AI(s) + O2(g) → AIO (s).
d. 4Al(s) + 3O2(g) →2Al2O3.
e. 3Al(s) + O2 → Al3O2.
Answer:
d. 4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
Explanation:
Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coats the metal preventing it from further oxidation: aluminum oxide. Aluminum is a cation with charge 3+ (Al³⁻) and oxide is an anion with charge 2- (O²⁻). Thus, the neutral compound aluminum oxide has the chemical formula Al₂O₃. The unbalanced chemical equation is:
Al(s) + O₂(g) → Al₂O₃(s)
We can balance using the trial and error method. First, we will balance O atoms by multiplying Al₂O₃ by 2 and O₂ by 3.
Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
Finally, we get the balanced equation by multiplying Al by 4.
4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
A worker gets paid 11.33 $/hour. The worker works on average 39.7 hours/week for 48 weeks per year. How much does the worker make in 1.7 years?
Answer:
36704 $
Explanation:
First we calculate how much the worker gets paid in one week:
11.33 $/hour * 39.7 hour/week = 449.80 $/weekThen we calculate how many weeks does the worker work in 1.7 years:
48 week/year * 1.7 years = 81.6 weeksFinally we calculate how much does the worker make in 1.7 years:
449.80 $/week * 81.6 weeks = 36704 $Refer to your completed Table 1d of the recitation guide of ionic compound naming rules to determine whether this statement is true or false. A Roman numeral in a compound name tells you how many of that ion appear in the formula. Select one: True False
Answer:
False
Explanation:
Roman numerals are seen in the names of several compounds. They often appear immediately after the name of central atom in the molecule.
These Roman numerals are used to depict the oxidation state of the central atom in the molecule and not to show how many of that ion appear in the formula.
For instance, in carbon IV oxide, the Roman numeral IV shows that the central atom in the compound-carbon is in the +4 oxidation state.
how old was the oldest animal fossil
help thx
Answer:
the Rhyniognatha hirsti
Explanation:
at age 400 million years old
Copper sulfate is made of one copper (Cu) atom, one sulfur (S) atom, and four oxygen (O) atoms. Write the chemical formula correctly.
anuvia, the trade name for sitagliptin, was introduced in 2006 for the treatment of type 2 diabetes. In what type of orbital does the lone pair on each N atom reside.
Answer: hello your question is poorly written below is the complete question
answer:
For N1 : sp³ orbital
For N2: p orbital
For N3 : p orbital
For N4 : sp² orbital
For N5 : sp² orbital
Explanation:
Determining the type of orbital in which the lone pair on each N atom will reside.
From the configuration attached below we can determine the type of orbital and they are ;
For N1 : sp³ orbital
For N2: p orbital
For N3 : p orbital
For N4 : sp² orbital
For N5 : sp² orbital
