Do only number 2 and thank

Answer: hello options related to your question is missing attached below is the missing part of your question

answer: No charge of the length of the bonds expected because the rod did not touch the charge source ( option A )

Explanation:

When the Charge is first, Furthest away and second  and closest to the source charge. The spring like bonds can be said to have No charge of the length  of the bonds expected because the rod did not touch the charge source when Furthest away the bond with charge will be less effective

Explanation:

sorry I need some points foe this

Complete Question

A flywheel in a motor is spinning at 510 rpm when a power failure suddenly occurs. The flywheel has mass 40.0 kg and diameter 75.0 cm . The power is off for 40.0 s , and during this time the flywheel slows down uniformly due to friction in its axle bearings. During the time the power is off, the flywheel makes 210 complete revolutions. At what rate is the flywheel spinning when the power comes back on(in rpm)? How long after the beginning of the power failure would it have taken the flywheel to stop if the power had not come back on, and how many revolutions would the wheel have made during this time?

Answer:

[tex]\theta=274rev[/tex]

Explanation:

From the question we are told that:

Angular velocity [tex]\omega=510rpm[/tex]

Mass [tex]m=40.kg[/tex]

Diameter d [tex]75=>0.75m[/tex]

Off Time [tex]t=40.0s[/tex]

Oscillation at Power off [tex]N=210[/tex]

Generally the equation for Angular displacement is mathematically given by

 [tex]\theta_{\infty}=\frac{w+w_0}{t}t[/tex]

 [tex]w=\frac{2*\theta_{\infty}}{t}-w_0[/tex]

 [tex]w=\frac{28210}{40*(\frac{1}{60})}-510[/tex]

 [tex]w=120rpm[/tex]

Generally the equation for Time to come to rest is mathematically given by

 [tex]t=(\frac{\omega_0}{\omega_0-\omega})t[/tex]

 [tex]t=(\frac{510}{510-120rpm})(40.0)(\frac{1}{60})[/tex]

 [tex]t=0.87min[/tex]

Therefore Angular displacement is

 [tex]\theta =(\frac{120+510}{2})0.87[/tex]

 [tex]\theta=274rev[/tex]

Answer:

21 m

Explanation:

Since the displacement from the door is 2 m West, we have our vector as -2i. The vector representing 14.0 m South is -14.0j. The vector representing 25.0 m East is 25.0i. The vector representing 11.0 m North is 11.0j. And, the vector representing 2.0 m West is -2.0i.

So, to get our position vector at the other location, we add all the vectors together.

So, r = -2i + (-14.0j) + 25.0i + 11.0j - 2i

= -4i + 25.0i - 14.0j + 11.0j

= 21.0i -3j m

Now, if we assume the position vector for the door is at the origin, we have r₀ = 0i + 0j m

So, our displacement from the door is r - r₀ = 21.0i - 3.0j - (0i + 0j) =  21.0i - 3.0j

So, the magnitude of the resultant displacement |r - r₀| = √(21.0² + 3.0²)

= 3.0√(7.0² + 1)

= 3.0√(49 + 1)

= 3.0√50

= 3.0 × 7.0711

= 21.2

≅ 21 m to the nearest integer

Answer:

In physics and classical mechanics, the three-body problem is the problem of taking the initial positions and velocities (or momenta) of three point masses and solving for their subsequent motion according to Newton's laws of motion and Newton's law of universal gravitation.[1] The three-body problem is a special case of the n-body problem. Unlike two-body problems, no general closed-form solution exists,[1] as the resulting dynamical system is chaotic for most initial conditions, and numerical methods are generally required.

Hope this answer is right!

Answer:

692.31 N

Explanation:

Applying,

F = ma............... Equation 1

Where F = Average force required to stop the player, m = mass of the player, a = acceleration of the player

But,

a = (v-u)/t............ Equation 2

Where v = final velocity, u = initial velocity, t = time.

Substitute equation 2 into equation 1

F = m(v-u)/t............ Equation 3

From the question,

Given: m = 75 kg, u = 6.0 m/s, v = 0 m/s (to stop), t = 0.65 s

Substitute these values into equation 3

F = 75(0-6)/0.65

F = -692.31 N

Hence the average force required to stop the player is 692.31 N

Answer:

4 amp

Explanation:

From ohm's law,

V=IR

so,

I=V/R

I=120/30

I=4amp ans..

Answer:

50km/h

Explanation:

Average Speed = Distance/Time

100km/2h = 50km/h

Answer:

The two of the following measurements, when taken together, would allow engineers to find the total mechanical energy dissipated during the skid

B. The contact area of each tire with the track.

C. The co-efficent of static friction between the tires and the track.

D. The co-efficent of static friction between the tires and the track.

Explanation:

Answer:

With the help of formula.

Explanation:

We can calculate the electric potential of any point through the formula of electric potential which is given below.

Electric potential =  Coulomb constant x charge/ distance of separation.

Symbolically it can be written as,  V = k q/ r where

V = electric potential  

k = Coulomb constant

q = charge

r = distance of separation

If we have all these data, we can simply put the data in the formula and we will get the value of electric potential.

Answer:

334.314 (kJ)

Explanation:

1) the formula for the required energy is: Q=c*m(Bp-t), where c - 4100 J/kg*C; m - 0.9 kg; Bp - 100.6 C; t - 10 C.

2) according to the formula above:

Q=4100*0.9*(100.6-10)=41*9*906=334314 (J).

Answer:

Explanation:

V = I * R

V = 4 * 12.1 = 48.4 v

Answer:

Explanation:

What a lot of words to solve such a simple problem! The perpendicular force is the one that is pushing straight down on the plane. There is no side to side movement here or friction acting on this dimension at all. Perpendicular force is the same as the weight of the block. That's it! Perpendicular force is also normal force which is the same thing as weight:

w = mg so

w = (4.04)(9.8) and

w = 4.0 × 10¹ N

The magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N

The given parameter are:

mass M = 4.04 kg

Angle of inclination = 30 degree

Acceleration due to gravity = 9.8 m/s^s

To calculate the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the plane, The force will be the weight of the block which is equal to the normal reaction.

Normal N = mgcosФ

N = 4.04 x 9.8 x cos30

N = 34.28 Newtons

At all point in the plane,  the magnitude of the perpendicular force that the block exerts on the surface of the plane will be the same.

Therefore,  the magnitude of the perpendicular force that the block exerts on the surface of the plane at a distance of 2.37 m down the incline plane is 34.3N

Learn more here : https://brainly.com/question/23944424

Answer:

No, the metal sphere becomes positively charged because electrons are transferred from the sphere to the rod.

Answer:

The proton has the same charge as the neutron.

Explanation:

Because the proton has a positive charge whereas the neutron has no charge  at all.

Explanation:

Sound travels from the tour guide to the other of the canyon and then back, thus hearing the echo. The time of 2.0 s represents the time it takes the sound to make a round trip, therefore it takes 1.0 s for the tour guide's voice to reach the other side of the canyon. At 20°C, the speed of sound is 343 m/s therefore the width of the canyon is

[tex]x = vt = (343\:m/s)(1.0\:s) = 343\:m[/tex]

The canyon in the given question is 340 m wide.

Echo is a reflection of sound that comes to the listener after the direct sound, but with a delay. The delay is inversely proportional to the separation between the source and the listener of the reflecting surface.

To hear the echo, the following conditions must be met:

There must be a minimum of 17 meters between the sound source and the reflecting surface, and there must be at least 0.1 seconds between the original sound and its echo.

Given parameters:

When a tour guide shouts across a canyon, her echo is heard 2.00 s later. That means, in two seconds the sound goes to other wall of canyon and reflected back.

At a temperature of 20 °C, velocity of sound is 340 m/s.

So, the wide is the canyon be = velocity of sound × time/2

= 340 m/s ×2 s/2s = 340 m.

Hence, the wide is the canyon be 340 m.

Learn more about echo here:

https://brainly.com/question/26833784

#SPJ2

Answer:

A

Explanation:

Wavelength is represented by lambda

Answer:

Density = 4.84 g/cm³

Explanation:

Given the following data;

Mass = 30 g

Volume = 6.2 cm³

To find the density of the piece of iron;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the equation;

[tex]Density = \frac{mass}{volume}[/tex]

Substituting into the equation, we have;

[tex]Density = \frac{30}{6.2}[/tex]

Density = 4.84 g/cm³

Answer:

tie hair back

only burn the amount of chemicals as

directed by the lab procedure

Explanation:

The correct safety precautions for Amelia to take from the options would be to tie her hair back and to only burn the amount of chemicals recommended by the lab procedure.

With her hair left flowing freely, Amelia runs the risk of the hair catching flame while trying to burn the chemicals according to the procedure. Hence, tying her hair up into one neat bunch will limit the risk of it catching fire while working in the lab.

Also, burning less or more than the amount of chemicals recommended by the procedure may be dangerous or hinder Amelia from getting the right result.

Answer:

1,3

Explanation:

just did it

Answer:

The first law states that an object at rest will stay at rest, and an object in motion will stay in motion unless acted on by a net external force. Mathematically, this is equivalent to saying that if The second law states that the rate of change of momentum of a body over time is directly proportional to the force applied, and occurs in the same direction as the applied force. the net force on an object is zero, then the velocity of the object is constant. The third law states that all forces between two objects exist in equal magnitude and opposite direction: if one object A exerts a force FA on a second object B, then B simultaneously exerts a force FB on A, and the two forces are equal in magnitude and opposite in direction

Explanation:

Answer: 1200kg

Explanation:

KE = (1/2)mv^2

103kJ = 103000J

103000J = (1/2) * m * (13.1m/s)^2

Solve for m

A car has a kinetic energy of 103kJ, and the speed of the car is 13.1 m/s,then the mass of the car would have been 1200 kilograms.

Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.

A car has a kinetic energy of 103 kJ. The speed of the car is 13.1 m/s,

The kinetic energy of the car = 1/2 × mass × velocity

                                     103000 =0.5 × mass × (13.1) ²

The mass of the car = 1200 Kilogram

Thus, if a car has a kinetic energy of 103kJ, and the speed of the car is 13.1 m/s,then the mass of the car would have been 1200 kilograms.

To learn more about mechanical energy, refer to the link;

https://brainly.com/question/2409175

#SPJ5

Explanation:

The change in entropy is a measure of temperature. When the temperature of a compound or a system increases, there will be more randomness in the system.

The boiling point is directly related to the number of carbon atoms but is indirectly proportional to the branching in a hydrocarbon.

Butane and methyl propane, both have 4 carbon atoms.

But, butane has 4 carbon atoms in a straight chain while methyl propane has 3 carbon atoms in a straight chain and 1 methyl substituent which makes it a branched hydrocarbon.

Thus, the boiling point of methyl propane will be less than the butane. Likewise, the pattern in entropies will be seen.

Answer:

8.829 Joules

Explanation:

The potential energy of an object, is the energy it posses (the energy stored within the object) by virtue of its relative elevation or height, position, state, or arrangement

The potential energy of an object raised to a given height, P.E. = m·g·h

Where;

m = The mass of the object

g = The acceleration due to gravity, a constant ≈ 9.81 m/s²

h = The present height of the object

For the potato sack having a mass, m = 2 kg, and raised to a height, h = 450 cm = 0.45 m, we have;

The potential energy given to the potato sack, by raising its height, P.E. is given as follows;

P.E. = 2 kg × 9.81 m/s² × 0.45 m = 8.829 Joules

The potential energy given to the potato sack, P.E. = 8.829 Joules

yes it matters because if it's not sharp it would take all day

Answer:

an axe is a type of machine called a wedge. it does matter how sharp your axe is. if your axe is not sharp then you will have a harder time cutting wood.

Explanation:

Answer:

False

Explanation:

Electromagnetic strength is inversely proportional to separation distance

Answer:

A ball rolling down the slope.

A bicycle rider is riding the bicycle on tthe slope where both pedals are engaged.

Answer:

For Ryan:

[tex]at \: highest \: point : v = 0 \\ velocity = 0 \: {ms}^{ - 1} [/tex]

For the football kicked:

[tex]s = ut - \frac{1}{2} g {t}^{2} \\ for \: range : s = 0 \\ u \sin( \theta) = \frac{gt}{2} \\ t = \frac{2u \sin(\theta) }{g} \\ range(x) = ut \\ x = \frac{ {2u {}^{2} \sin(\theta) }^{} }{g} \\ \frac{50 \times 9.8}{ {2318.9}^{} } = \sin(\theta) \\ \\but \: 0 = u \sin(25) - 2 \times 9.8 \times 50 \\ u = 2318.9 \: {ms}^{ - 1} \\ \theta = 12.2 \degree[/tex]

Answer:

the highest point for the first question is 0 meters per second

the answer for question 2 is 45 degrees

Answer:

nuclear fission

Explanation:

nuclear fission

Answer: Nuclear fission

Explanation:

Answer:

It spreads diseases.

Explanation:

But when cooked food is kept on the place where uncooked meat or food was kept the germs spread to the cooked food also and as the cooked food cannot be washed it harms us as we directly consume it.