Distance between (-1,0) and (8,6)

Answer:

D. Observational Study

Explanation:

An observational  study is one in which all the participants are subjected to a common treatment and then compared to people who did not receive the same treatment. This is the case with the students who where subjected to the same treatment; an additional rehearsal session. They are then observed by the professor and compared to those who did not participate in the experiment.  

This is also an example of a cohort observational study. A cohort observational study is one in which all the participants have a common uniting factor. They are made to undergo a treatment and then compared to those who did not receive the treatment. This type of study  is subject to bias because a positive or negative result might be because of other factors not related to the study.

Answer:I believe it would be 5/12

Step-by-step explanation:

You add all of them up then since it's 5 grapes and in total there is 12 fruit snacks. It should be 5 grapes of 12 fruit snacks in the bag.

Answer:

$42,900 a year

Step-by-step explanation:

so there are 26 bi-weeks in a year. (fun fact)

you take $1,650 and multiply that biweekly to get her annual salary.

1650*26=42,900

Answer:

3/90

Step-by-step explanation:

1 slot  is 1/30

2 slot is 1/30

3 slot is 1/30

this gives you that 3/90 when you had them

Answer:

D)  1/(30×30×30) = 1/27000 = 0.00003 or 0.003%

Step-by-step explanation:

Answer:

[tex]t=\frac{(43.5 -40.1)-(0)}{3.678\sqrt{\frac{1}{20}+\frac{1}{20}}}=2.923[/tex]

The degrees of freedom are

[tex]df=20+20-2=38[/tex]

And the p value is given by:

[tex]p_v =2*P(t_{38}>2.923) =0.0058[/tex]

Since the p value for this cae is lower than the significance level of 0.05 we have enough evidence to reject the null hypothesis and we can conclude that the true means for this case are significantly different

Step-by-step explanation:

When we have two independent samples from two normal distributions with equal variances we are assuming that  

[tex]\sigma^2_1 =\sigma^2_2 =\sigma^2[/tex]

And the statistic is given by this formula:

[tex]t=\frac{(\bar X_1 -\bar X_2)-(\mu_{1}-\mu_2)}{S_p\sqrt{\frac{1}{n_1}+\frac{1}{n_2}}}[/tex]

Where t follows a t distribution with [tex]n_1+n_2 -2[/tex] degrees of freedom and the pooled variance [tex]S^2_p[/tex] is given by this formula:

[tex]S^2_p =\frac{(n_1-1)S^2_1 +(n_2 -1)S^2_2}{n_1 +n_2 -2}[/tex]

The system of hypothesis on this case are:

Null hypothesis: [tex]\mu_1 = \mu_2[/tex]

Alternative hypothesis: [tex]\mu_1 \neq \mu_2[/tex]

We have the following data given:

[tex]n_1 =20[/tex] represent the sample size for group 1

[tex]n_2 =20[/tex] represent the sample size for group 2

[tex]\bar X_1 =43.5[/tex] represent the sample mean for the group 1

[tex]\bar X_2 =40.1[/tex] represent the sample mean for the group 2

[tex]s_1=4.1[/tex] represent the sample standard deviation for group 1

[tex]s_2=3.2[/tex] represent the sample standard deviation for group 2

First we can begin finding the pooled variance:

[tex]\S^2_p =\frac{(20-1)(4.1)^2 +(20 -1)(3.2)^2}{20 +20 -2}=13.525[/tex]

And the deviation would be just the square root of the variance:

[tex]S_p=3.678[/tex]

The statistic is givne by:

[tex]t=\frac{(43.5 -40.1)-(0)}{3.678\sqrt{\frac{1}{20}+\frac{1}{20}}}=2.923[/tex]

The degrees of freedom are

[tex]df=20+20-2=38[/tex]

And the p value is given by:

[tex]p_v =2*P(t_{38}>2.923) =0.0058[/tex]

Since the p value for this cae is lower than the significance level of 0.05 we have enough evidence to reject the null hypothesis and we can conclude that the true means for this case are significantly different

Using the t-distribution, as we have the standard deviation for the sample, it is found that the researcher can conclude that there is a difference between the population means at the 0.05 significance level.

At the null hypothesis, it is tested if there is no difference, that is:

[tex]H_0: \mu_1 - \mu_2 = 0[/tex]

At the alternative hypothesis, it is tested if there is a difference, that is:

[tex]H_a: \mu_1 - \mu_2 \neq 0[/tex]

For each sample, we have that they are given by

[tex]\mu_1 = 43.5, s_1 = \frac{4.1}{\sqrt{20}} = 0.9168[/tex]

[tex]\mu_2 = 40.2, s_2 = \frac{3.2}{\sqrt{20}} = 0.7155[/tex]

Hence, for the distribution of differences, the mean and the standard error are given by:

[tex]\overline{x} = \mu_1 - \mu_2 = 43.5 - 40.2 = 3.3[/tex]

[tex]s = \sqrt{s_1^2 + s_2^2} = \sqrt{0.9168^2 + 0.7155^2} = 1.163[/tex]

It is given by:

[tex]t = \frac{\overline{x} - \mu}{s}[/tex]

In which [tex]\mu = 0[/tex] is the value tested at the null hypothesis, hence:

[tex]t = \frac{\overline{x} - \mu}{s}[/tex]

[tex]t = \frac{3.3 - 0}{1.163}[/tex]

[tex]t = 2.84[/tex]

Considering a two-tailed test, as we are testing if the mean is different of a value, with a significance level of 0.05 and 20 + 20 - 2 = 38 df, the critical value is of [tex]|z^{\ast}| = 2.0244[/tex].

Since the absolute value of the test statistic is greater than the critical value, it is found that the researcher can conclude that there is a difference between the population means at the 0.05 significance level.

More can be learned about the t-distribution at https://brainly.com/question/16313918

Answer:

74 and 27

Step-by-step explanation:

let x and y be the numbers

x + y =101........eqn 1

x - y = 47.......eqn 2

solve simultaneously

from equation 2, make x the subject

x= 47 + y........eqn 3

put eqn 3 into eqn 1

(47+y) + y = 101

47 + 2y = 101

       2y= 101 - 47

       2y=54

         y= 54/2

         y= 27

put y=27 into eqn 3

x = 47 + 27

x = 74

Answer:

For 0 correct answer [tex]^4c_0p^0q^{4-0}[/tex]

For 1 correct answer [tex]^4c_1p^1q^{4-1}[/tex]

For 2 correct answer [tex]^4c_2p^0q^{4-2}[/tex]

For 3 correct answer [tex]^4c_3p^1q^{4-3}[/tex]

For 4 correct answer [tex]^4c_4p^1q^{4-4}[/tex]

Step-by-step explanation:

It is given that there are 4 questions n = 4

Number of choices is 4

So probability of getting correct answer [tex]=\frac{1}{4}[/tex]

Probability of getting incorrect answer [tex]=1-\frac{1}{4}=\frac{3}{4}[/tex]

Probability distribution is given by [tex]^nc_rp^rq^{n-r}[/tex]

Therefore probability distribution of 0 correct answer

[tex]^4c_0p^0q^{4-0}[/tex]

Therefore probability distribution of 1 correct answer

[tex]^4c_1p^1q^{4-1}[/tex]

Therefore probability distribution of 2 correct answer

[tex]^4c_2p^0q^{4-2}[/tex]

Therefore probability distribution of 3 correct answer.

[tex]^4c_3p^1q^{4-3}[/tex]

Therefore probability distribution of 4 correct answer.

[tex]^4c_4p^1q^{4-4}[/tex]

Answer: right isosceles

Step-by-step explanation:

the angle at the bottom is right therefore you need to figure out the lengths of the sides to conclude if it is isosceles or scalene. because two of the sides are the same length and the other is not it is isosceles

Answer: [tex]3(3-4x+2y)[/tex]

Step-by-step explanation:

[tex]9-12x+6y[/tex]

[tex]3(3-4x+2y)[/tex]

Answer: 28

Step-by-step explanation: see prev. explanation

The absolute deviation of 5 from the mean of this data set is 28.

Absolute deviation is "the distance between each data point to the mean".

According to the question,

The data set is 26, 12, 35, 28, 14

Average of the data set = [tex]\frac{sum of the data value }{Total number of observation}[/tex]

= [tex]\frac{26+12+35+28+14}{5}[/tex]

= [tex]\frac{115}{5}[/tex]

= 23.

Thus, the average of the data set is 23.

In order to find absolute deviation of 5 subtract each data point from the mean.

26 - 23 = |3| = 3

12 - 23  = |-11| = 11

35 - 23 = |12| = 12

28 - 23 = |5| =  5

14 - 23  = |-9| = 9.

Hence, the absolute deviation of 5 is from the mean of the data set is 28.

Learn more about absolute deviation here

https://brainly.com/question/4364130

#SPJ2

Answer:

1.

Step-by-step explanation:

∛1= 1.

It can also be seen as:

1×1×1= 1.

Answer:

A. X=6 only

Step-by-step explanation:

Answer:

The average of the extracted scores that are extreme values (outliers) = 102

Step-by-step explanation:

With the logical assumption that the population size is large enough, for a normal distribution,

68% of the data lies within 1 standard deviation of the mean.

95% of the data lies between 2 standard deviations of the mean.

99.7% of the data lies within 3 standard deviations of the mean.

So, the outliers for a normal distribution are usually beyond 3 standard deviations of the mean.

The mean = 128.5

Standard deviation = 8.2

The range of scores within 3 standard deviations of the mean is obtainable thus

(Mean ± 3standard deviations)

3 × standard deviations = 3 × 8.2 = 24.6

(128.5 ± 24.6) = (103.9, 153.1)

The 3 extracted scores are 148, 102 and 152. The only extreme value of these 3 extracted scores is 102. The two other scores are within the range of 3 standard deviations of the mean.

Hence, the average of the extracted scores that are extreme values (outliers) = 102

Hope this Helps!!!

Answer:

A. 1/2

Step-by-step explanation:

20x=10

Divide 20 on both sides of the equation to get x by itself

20x=10

___.  __

20.     20

x =1/2

Answer:

A) x= 1/2

Step-by-step explanation:

20x= 10 we then divide 10 by 20 to get x= 10/20 or if we simplify x= 1/2. Thus answer choice A) is correct!

Answer:

⅓ m/s

Step-by-step explanation:

Area of a square is:

A = s²

Take derivative of both sides with respect to time:

dA/dt = 2s ds/dt

Given that dA/dt = 6 m²/s and s = 9 m:

6 m²/s = 2 (9 m) ds/dt

ds/dt = ⅓ m/s

The Formula of the area of a square: A = bh or A = s^2

Solution:

~Take derivative of both sides

da/dt = 2s * ds/dt

~Use given values (6m^2/s and 9m)

6 = 2(9) * ds/dt

~Simplify

1/3m/s = ds/dt

Best of Luck!

Answer:

  [tex]\left[\begin{array}{cc}63&38\\49&28\end{array}\right][/tex]

Step-by-step explanation:

  [tex]\left[\begin{array}{cc}1&8\\0&7\end{array}\right]\left[\begin{array}{cc}7&6\\7&4\end{array}\right]=\left[\begin{array}{cc}(1)(7)+(8)(7)&(1)(6)+(8)(4)\\(0)(7)+(7)(7)&(0)(6)+(7)(4)\end{array}\right]\\\\=\left[\begin{array}{cc}63&38\\49&28\end{array}\right][/tex]

Each element of the product matrix is the dot product of the corresponding row in the left matrix and the corresponding column in the right matrix.

For example, the element at row 2, column 1 of the product is [0 7]·[7, 7], the dot product of row 2 of the left matrix with column 1 of the right matrix.

_____

Many calculators, spreadsheets, and web sites can do this tedious math for you.

Answer:

C

Step-by-step explanation:

Answer:

e = d + 5

Step-by-step explanation:

e = d + 5

f = d - 7

Solve for e means write as e = ...d

and this is already there...

You can not write it more compact then this.

If you try, you will notice you finally end with the initial equation which you started with, or you endup with something which is obviously very true like

e = e or d = d.

Answer:

Mode: 11

Median: 13

Answer:

(23, 13, 17, 11, 11):

Median: 13

Arithmetic mean: 15

Geometric mean: 14.380735416546

Harmonic mean: 13.848764056076

Mode: 11

Standard deviation: 4.5607017003966

Variance: 20.8

Mean Absolute Deviation: 4

Range: 12

Interquartile range: 9

Lower quartile: 11

Upper quartile: 20

Quartile deviation: 4.5

Population size:5

Answer:

The problem is clearly solved in the attachment

Answer:

B. -3(4x + 1) (x - 4)

Step-by-step explanation:

Out of the other answer choices, "B," is the only that factorizes correctly and ends up with the correct factorization (It already gives you the break-down of the trinomial).

However, if you're unsure about the answer, you can always take the end result: -3(4x + 1) (x - 4), and multiply it together to see if you can end up with the original trinomial: [tex]-12x^2 + 45x + 12[/tex]

Answer:

21

Step-by-step explanation:

Answer:

6.7

Step-by-step explanation:

Answer:

The area of the triangle is [tex]A=6 \:units^2[/tex].

Step-by-step explanation:

The area A of a triangle is given by the formula [tex]A=\frac{1}{2} bh[/tex] where b is the base and h is the height of the triangle.

From the graph, we can see that the base is 3 units and the height is 4 units. Therefore, the area of the triangle is

[tex]A=\frac{1}{2} \cdot3\cdot 4=\frac{12}{2}=6 \:units^2[/tex]

Answer:

3 1/4

Step-by-step explanation:

3/4 + (1/3 ÷1/6) - (-1/2)

Subtracting a negative is adding

3/4 + (1/3 ÷1/6) +1/2

Parentheses first

Copy dot flip

3/4 + (1/3 * 6/1) +1/2

3/4 + 2 + 1/2

Get a common denominator

3/4 + 2 + 2/4

2 + 5/4

2 + 4/4 +1/4

2+1 + 1/4

3 1/4

Work Shown:

In the numerator, we have 2^2*x^2, which is really just 4x^2. Replace x with 3 and we get 4*x^2 = 4*3^2 = 36.

For the denominator, xy^2, we get

x*y^2 = 3*2^2 = 12

So far we have,

[tex]\frac{2^2x^2}{xy^2} = \frac{4x^2}{xy^2} = \frac{36}{12} = 3\\\\\text{ or simply} \\\\\frac{2^2x^2}{xy^2} = 3[/tex]

when x = 3 and y = 2.

Square both sides to end up with...

[tex]\frac{2^2x^2}{xy^2} = 3\\\\\left(\frac{2^2x^2}{xy^2}\right)^2 = 3^2\\\\\left(\frac{2^2x^2}{xy^2}\right)^2 = 9[/tex]

Answer:

6

Step-by-step explanation:

The ratio would be 3:65, so to get it to ?:130 you would multiply by 2 (65•2=130). So all you have to do is do 3•2=6 to get the correct ratio which is 6:130. So that answer would be 6.

Answer:

Inverse of f(x)

               [tex]f^{l} (x) = \frac{8 x}{3-x}[/tex]

Step-by-step explanation:

Explanation:-

Step(i):-

Given the function

                        [tex]f(x) = \frac{3 x}{8+x}[/tex]

Given function is one-one and onto function

Hence f(x) is bijection function

                   [tex]y = f(x) = \frac{3 x}{8+x}[/tex]

now cross multiplication, we get

            ( 8+x)y = 3 x

             8 y + x y = 3 x

             8 y = 3 x - x y

taking Common 'x' we get

            x (3 - y) = 8 y

                   [tex]x = \frac{8 y}{3-y}[/tex]

Step(ii):-

The inverse function

                 [tex]x = \frac{8 y}{3-y} = f^{l}(y)[/tex]

The inverse function of x

                  [tex]f^{l}(x) = \frac{8 x}{3-x}[/tex]

Final answer:-

Inverse of f(x)

               [tex]f^{l} (x) = \frac{8 x}{3-x}[/tex]

Answer:

B

Step-by-step explanation:

Answer:

B

Step-by-step explanation:

B because first you need to read the problem and understand the information.

Answer:

Hence, Stacy will spin 6,  8.33 times out of her n = 50 attempts.

Step-by-step explanation:

Let us consider a success to get a 6. In this case, note that the probability of having a 6 in one spin is 1/6. We can consider the number of 6's in 50 spins to be a binomial random variable. Then, let X to be the number of trials we get a 6 out of 50 trials. Then, we have the following model.

We will estimate the number of times that she spins a 6 as the expected value of this random variable.

Recall that if we have X as a binomial random variable of n trials with a probability of success of p, then it's expected value is np.

Then , in this case, with n=50 and p=1/6 we expect to have  number of times of having a 6, which is 8.33.

Answer:

2 divided

Step-by-step explanation: