THE ADVANTAGE OF IODIN
IODINE CAN LEAD TO GOITER AND OTHER THYROID PROBLEMS.THE DISADVANTAGE OF IODIN
IODIN MAY LEAD TO THYROIDITIS AND THYROID PAPILLARY CANCERThe distance between two adjacent peaks on a wave is called the wavelength. (2pts) a. The wavelength of ultraviolet light is 255nm. What is the wavelength in meters? b. The wavelength of a beam of red light is 683nm. What is its wavelength in angstroms?
Answer:
a.2.55e-7
b.6830
Explanation:
There are two unknowns in this problem - the mass of potassium carbonates and the mass of sodium carbonate. Let's designate the grams of potassium carbonate as our first unknown (you may want to call it gKcarb, or x, some other variable name that makes sense to you) and the grams of sodium carbonate as our second unknown(you may want to call it gNacarb, or y, some other variable name that makes sense to you). Set up an equation for the sum of your two unknowns. Starting with 'unknown' grams of potassium carbonate, use stoichiometry to calculate the number of moles of nitric acid that would react with the potassium carbonate. Your answer will have a variable for your unknown grams of potassium carbonate in it. Starting with 'unknown' grams of sodium carbonate, use stoichiometry to calculate the number of moles of nitric acid that would react with the sodium carbonate. Your answer will have a variable for your unknown grams of sodium carbonate in it. Set up an equation for what you get if you add these two quantities.
This problem, is describing two scenarios, the first one, a reaction between potassium carbonate and nitric acid, and also this very same acid with sodium carbonate. In addition, it is asked to set up two equations whereby you can get the grams of nitric acid needed to react with the unknown grams of both carbonates.
In this case, we can start off by designating the unknown mass of potassium carbonate as X and that of sodium carbonate as Y, so that we will be able to provide a reliable answer. Next, we write the corresponding chemical equations that take place:
K2CO3 + 2HNO3 --> 2KNO3 + H2O + CO2
Na2CO3 + 2HNO3 --> 2NaNO3 + H2O + CO2
After that, we can set up the conversion by considering the following calcultion track:
g Carbonate --> mol Carbonate --> mol HNO3 --> g HNO3
The conversion from grams to moles involve the carbonates' molar mass and the conversion from moles of nitric acid to grams, its molar mass well. In addition, we need the 1:2 mole ratio of the carbonates to nitric acid that it is evidenced in the reaction.
Therefore, the resulting equations that can be set up are shown as follows:
[tex]X g K_2CO_3 *\frac{1mol K_2CO_3 }{138.2 gK_2CO_3 } \frac{2molHNO_3}{1molK_2CO_3 } *\frac{63.1gHNO_3}{1molHNO_3} \\\\Y g Na_2CO_3 *\frac{1mol K_2CO_3 }{105.99 gK_2CO_3 } \frac{2molHNO_3}{1molNa_2CO_3 } *\frac{63.1gHNO_3}{1molHNO_3}[/tex]
Learn more:
https://brainly.com/question/22889208https://brainly.com/question/24384921what is the name of something that starts with N and ends with G
Nutmeg
Nubbing
Notifying
Neezing
Nudging
Needing
Niffing
Narcotizing
Nanjing
Neighbouring
Nothing
Nimming
Neighboring
Netting
Nesting
Narcing
Nitpicking
Non-Living
Neutralizing
Nightwalking
Nonspeaking
40.0 g of ice cubes at 0.0°C are combined with 150. g of liquid water at 20.0°C in a coffee cup calorimeter. Calculate the final temperature reached, assuming no heat loss or gain from the surroundings. (Data: specific heat capacity of H2O(l), c = 4.18 J/g×°C; H2O(s) => H2O(l) DH = 6.02 kJ/mol)Calculate the final temperature reached, assuming no heat loss or gain from the surroundings. (Data: specific heat capacity of H2O(l), c = 4.18 J/g×°C; H2O(s) => H2O(l) DH = 6.02 kJ/mol)
The final temperature of the mixture in the coffee cup calorimeter is; 19.467 °C
According to the law of energy conservation:
As such; the heat transfer in the liquid water is equal to heat gained by the ice
Heat transfer by liquid water is therefore;
DH = m × c × DTDH = 6.02 kJ/mol) = 150 × 4.18 × (T1 - T2)6020 J/mol = 627 × (20 - T2)However, since 18g of water makes one mole
6020 J/mol = 6020/18 = 334.44 J/g.334.44 = 627 × (20 - T2)0.533 = (20 - T2)T2 = 20 - 0.533T2 = 19.467°C
Read more on heat:
https://brainly.com/question/21406849
In this photograph, a soccer player is about to kick the ball. Use the situation to explain that when two objects interact, the force between them can cause energy to be transferred. In your response, identify the type of energy that each object has before they interact, the forces exerted when the objects interact, and the type of energy that each object has after they interact.
The explanation to the question is stated as follows:
Newton's first law of motion states that: a body will continue in its state of rest or uniform motion unless an external force acts on it. So then, the ball initially possesses potential energy because it was at rest. While the leg of the soccer player possesses kinetic energy because its in motion.
Thus, when the player hits the ball, a force known as push has been applied. This would ensure that the ball compels and moves in the direction of the applied force. Therefore after the interaction, the leg of the player now possesses potential energy, since it would come to rest after hitting the ball. While the ball would start moving, now possessing kinetic energy.
Visit: https://brainly.com/question/12099288
the process of breaking food is to release energy is called _____
Answer:
The process by which food is broken down to release energy is called respiration
I hope it helps.
Answer:
Respiration
Explanation:
hope this helps.
What are the bond angles found in germanium disulfide ?
Answer:
Every germanium atom is tetrahedrally linked to four sulphur atoms, with an interatomic distance of 2.19A. The angle between the two sulphur bonds is 103°.
hope this helps
An interatomic distance of 2.19A exists between each germanium atom and the four sulphur atoms that are tetrahedrally connected to it. The two sulphur bonds form a 103° angle.
What is bond angle ?A complex molecule's or ion's bond angle is the angle between the two bonds, or the angle between two orbitals that contain bonding electron pairs surrounding the central atom. It is determined using a spectroscopic approach and measured in degrees.
Any angle between two bonds that share an atom is known as a bond angle, and it is often measured in degrees. The distance along the straight line between the nuclei of two bound atoms is known as a bond distance.
Bond angles also have a role on a molecule's structure. The angles between neighboring lines that form bonds are known as bond angles. The difference between linear, trigonal planar, tetrahedral, trigonal-bipyramidal, and octahedral crystals may be determined by the bond angle.
Thus, The two sulphur bonds form a 103° angle.
To learn more about bond angle, follow the link;
https://brainly.com/question/14089750
#SPJ2
A buffer solution was prepared by mixing 50.0 mL of a 0.100 M solution of CH3COOH with 0.500 grams of NaCH3COO. The resulting mixture is diluted to 100.0 mL. What is the pH of the solution
Answer:
100.0
Explanation:
Have a great day god bless
A mixture is made of 40 ml of salt water to 200 ml of solution. What percent of the solution is salt water?
Answer:
16.7%
Explanation:
40 ml of salt water + 200 ml of solution = 240 ml
40/240 = 4/24 = 1/6=16.7%
A radioactive sample has a half life of 1 hour. If you start with 1.000 gram of it at noon, how much of it remains at 4pm
The amount of the sample remaining at 4pm is 0.0625 g
We'll begin by calculating the number of half-lives that has elapsed
Half-life (t½) = 1 hour
Time (t) = 4 hour
Number of half-lives (n) =?n = t / t½
n = 4 / 1
n = 4Finally, we shall determine the amount the sample remaining at 4pmNumber of half-lives (n) = 4
Initial amount (N₀) = 1 g
Amount remaining (N) =?[tex]N = \frac{N_0}{ {2}^{n}} \\ \\ N = \frac{1}{ {2}^{4}} \\ \\ N = \frac{1}{16} \\ \\ N = 0.0625 \: g[/tex]
Thus, the amount remaining at 4pm is 0.0625 g
Learn more: https://brainly.com/question/25750315
2. A solution NaF is add dropwise to a solution that is .0122 M in Ba . When the concentration of F exceeds ______M, BaF2 will precipitate. Neglect volume changes. BaF2 K
Explanation:
BaF2(s) <------> Ba2+(aq) + 2F-(aq)
Ksp BaF2 = 1.0 x 10^-6.
Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium
When Qsp >Ksp, BaF2 will precipitate
Qsp = [Ba2+(aq)]×[F-(aq)]^2
[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.
0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6
[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6
[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6
[F- (aq)] > 9.05 × 10^-3 moldm-3
So F- concentration should be more than 9.05 × 10^-3 moldm-3
17.
In the reaction N2 + 3H2 → 2NH3 how many moles of ammonia will be produced from 1.30 mol
of hydrogen and excess nitrogen?
According to the equation given, we have N2 + 3H2 → 2NH3.
Therefore, to determine the moles of NH3 we have to do the following-
1.3 mol H2 × 2 mol NH3 / 3 mol H2 = 0.87 mol
Answer: .87 moles of NH3 are produced from 1.3 moles of H2.
I hope this helps!
The structure of Disodium edta
Answer:
EDTA disodium salt | C10H14N2Na2O8
Explanation:
You measure the absorbance of your extracted curcumin solution and realize that the solution is too concentrated. What made you realize this
If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.
Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.
Hence, if the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.
Learn more: https://brainly.com/question/13440572
What is the net charge of C
Explanation:
Sorry, I don't know, but I can tell you that when an atom, or a body, has the same amount of positive charges (protons) and negative charges (electrons), it is said to be electrically neutral. ... The net charge corresponds to the algebraic sum of all the charges that a body possesses.
Answer: Neutral carbon-12 (or any carbon atom) has 6 electrons with a total negative charge of 6e- orbiting a nucleus with a total positive charge of 6e+, so that the total net charge is zero. The nucleus is made up of 6 protons, each with a positive charge of e+, and 6 neutrons, each with zero charge.
Explanation:
HELP PLEASE I NEED THIS
What is the lowest point of a wave called?
Amplitude
Crest
Frequency
Trough
Answer:
the lowest point of the wave is called Trough
Answer:
Trough is the correct answer
Explanation:
The highest part of the wave is called the crest. The lowest part is called the trough.
Which choice is an element? Question 2 options: air (N2 mixed with O2 , and CO2 ) sodium chloride (NaCl) oxygen (O2 ) water (H2O )
Answer:
oxygen (O2 )
Explanation:
After spending some time in the stomach, the food is sent to the blank
Answer:
the small intestine where nutrients are absorbed.
Which of the following is NOT a property of gases?
Which of the following is NOT a property of gases?
a. Constant shape
b. Fill their container
c. Have mass
d. Easily compressed
Answer:
a. Constant shape
*1. The internal energy with a system associated with the motion of particles and that can be added to a substance is called_____.
A. Thermal energy
B. Electrostatic forces
C. Temperature
D. Kinetic energy
•
•
•
*2. Which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?
A. The particles within the system will have greater motion, and the temperature will decrease.
B. The particles within the system will have greater motion, and the temperature will increase.
C. The particles within the system will have less motion, and the temperature will increase.
D. The particles within the system will have less motion, and the temperature will decrease.
•
•
•
*3. Which statement correctly describes how attractions that hold particles break?
A. Attractions due to electrostatic forces. When particles have low enough energy, these forces can no longer keep particles together.
B. Attractions due to gravitational forces. When particles have low enough energy, these forces can no longer keep particles together.
C. Attractions due to gravitational forces. When particles move fast enough, these forces can no longer keep particles together.
D. Attractions due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
•
•
•
*4. Which statement explains why a rubber band analogy is not a perfect comparison for bonds in a substance when considering phase changes?
A. For a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
B. For a phase change from liquid to gas, the bonds do not break completely and the particles can still slide past each other.
C. For a phase change from solid to liquid, the bonds break completely and particles can move independently of each other.
D. For a phase change from solid to liquid, the bonds do not break completely in the particles can still slide past each other.
•
•
•
*5. The boiling point of benzene is 80°C. Which pair of samples will have the same average kinetic energy as benzene molecules?
A. Two samples of liquid benzene, one at 70°C in the other at 80°C.
B. A sample of liquid benzene at 70°C and a sample of gaseous benzene at 90°C.
C. Two samples of gaseous benzene, one at 80°C in the other at 90°C.
D. A sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C.
Answer:
1. A/Thermal Energy
2. B/The particles within the system will have greater motion, and the temperature will increase.
3. C/Attractions occur due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
4. D/ For a phase change from solid to liquid, the bonds do not break completely and particles can still slide past each other.
5. D/ a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC
Explanation:
I took the Test.
1. Internal energy associated with systems and particles is thermal energy. Thus, option A is correct.
The internal energy has been described as the energy that has been assessed by the molecules and bonds at the STP. Thermal energy has been the energy of particular molecules and the system comprising all the molecules have the summation of the thermal energy.
Thus, internal energy associated with systems and particles is thermal energy. Thus, option A is correct.
2. The addition of energy results in greater motion with an increase in temperature has been representation no phase change. Thus, option B is correct.
The addition of energy to the substance results in the increased motion of the particles. The energy higher than the threshold energy has been responsible for the phase change of the substance.
The addition of energy results in greater motion with an increase in temperature has been representation no phase change. Thus, option B is correct.
3. The movement of the particles under the gravitational attraction is not enough to hold the particles together at a longer distance. Thus, option B is correct.
The attraction has been the force that has been responsible for holding the particles in a molecule. Different attractions have a different levels of stability and strength.
The movement of the particles under the gravitational attraction is not enough to hold the particles together at a longer distance. Thus, option B is correct.
4. The phase change of the molecules has been mediated by overcoming the force of attraction that allows the molecules to move freely. The solid to liquid phase change has been mediated with the breaking of the attraction between the bonds allowing free movement.
Thus, statement 4 is incorrect, and option D is correct.
5. The kinetic energy has been the energy possessed by the moving molecules in the medium. The molecules in liquid and gas have been possessing the same energy at the same temperature, Thus, option D is correct.
For more information about energy and electrostatic interactions, refer to the link:
https://brainly.com/question/6170401
Magnesium metal burns in air with an intense bright light according to the equation
2 Mg(s) + O2(g) → 2 MgO(s) + 1200 kJ
A.) What is the amount of energy in kJ produced when 4.5 mol of Mg is burned in the presence of excess oxygen?
The heat produced by 4.5 moles of magnesium when burnt is 2700 kJ.
A thermochemical reaction is a reaction in which the amount of heat lost or gained is included in the reaction equation. The thermochemical reaction equation for the combustion of magnesium is shown as follows;
2 Mg(s) + O2(g) → 2 MgO(s) + 1200 kJ
From the reaction equation;
2 moles of magnesium produced 1200 kJ of heat
4.5 moles of magnesium will produce 4.5 moles × 1200 kJ/2 moles
= 2700 kJ
Learn more: https://brainly.com/question/14281129
The pH of an acidic solution is 4.83. What is [H"]?
[tex]pH = -\log[H^{+}] \\\\\implies \log[H^{+}] = -pH\\\\\implies [H^{+}] = 10^{-pH}\\\\\implies [H^{+}] = 10^{-4.83} = 0.000015[/tex]
How much does a cloud weigh in pounds?
Answer:
1.1 million pounds
Explanation:
Answer:
1.1 million pounds
Explanation:
that's a lot of water above us!!
Bas +
PtF2 →
BaF2 +
Pts
Need to balance it
it is already balanced
REACTANTS
Barium sulfide (BaS) + platinum (Ii) fluoride
PRODUCT
Barium fluoride (BaF2) + Cooperite (PtS)
Hope this answer helps you dear! take care
What is a solute?
substance in which another substance dissolves and mixes evenly A
a solution unable to be separated by any means B
a mixture that can easily be separated with simple tools C
the substance that dissolves into another substance D
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~ D
Solute is the substance that dissolves into another substance
. Nhiệt độ ban đầu của 344 g một mẫu sắt là 18,2oC. Nếu mẫu sắt này hấp thụ 2,25 kJ nhiệt lượng thì nhiệt độ cuối của mẫu sắt này là bao nhiêu? (CFe = 0,449 J/g.K).
Answer:
i can't understand the question
pls help 8th grade k12
For the given reactions determine if the entropy increases or decreases.
A) 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g)
B) CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O
Entropy increases in reaction 1 due to increase in the number of particles while entropy decreases in reaction 2 due to decrease in the number of particles.
Entropy refers to the degree of disorderliness in a system. The higher the entropy, the more disorderly the system is and the lower the entropy, the less disorderly the system is. We must note that entropy increases with increase in the number of particles.
In the reaction, 2 KClO3 (s)⇌2 KCl (s)+3 O2 (g), entropy increases because one of the products is a gas and the number of particles increases from left to right. In the second reaction, CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O, entropy decreases because the number of particles decreases.
Learn more: https://brainly.com/question/14281129
What is it called when you have hydrogen peroxide that just eventually turns into water
Answer:
chlorine
Explanation:
Answer:chlorine reacts with hydrogen peroxide
Explanation:
i want help with these questions thanks !
Answer:
I will give you hints, as follows:
Explanation:
- two words: climate change
- methane smells funny
- the number of electric cars sold each year is increasing
- there´s a reason they´re call "renewable"
- GEOmetry, GEOlogy, GEOthermal
Hope this helps!
