Determine if the ordered pair (-2, -4) is a solution for equation 2y - 3x = -2.

Answer:

We know that A receives R500 less than C, so we can write:

4x = 9x - 500

Solving for x, we get:

5x = 500

x = 100

Now we can calculate the amounts received by each person:

A = 4x = 4(100) = R400

B = 7x = 7(100) = R700

C = 9x = 9(100) = R900

To check our answer, we can verify that the ratios of the amounts received by A, B, and C are indeed 4:7:9:

A:B = 400:700 = 4:7

B:C = 700:900 = 7:9

Therefore, the total amount divided is:

400 + 700 + 900 = R2000

So the amount that is divided is R2000.

Step-by-step explanation:

The total amount of money divided is R2000.

Ratio is described as the comparison of two quantities to determine how many times one obtains the other. The proportion can be expressed as a fraction or as a sign: between two integers.

We are given that;

The ratio of A, B and C= 4:7:9

Now,

Let's start by assigning variables to the unknowns in the problem. Let's call the total amount of money "T". Then, if A receives 4x, B receives 7x, and C receives 9x, where "x" is some constant, we can write:

4x + 500 = C's share

We can also write an equation to represent the fact that the three shares add up to the total amount:

4x + 7x + 9x = T

Simplifying this equation, we get:

20x = T

Now we can substitute the first equation into the second equation and solve for x:

4x + 7x + (4x + 500) = 20x

15x + 500 = 20x

500 = 5x

x = 100

Now we can find the individual shares by multiplying x by the appropriate ratio factor:

A's share = 4x = 400

B's share = 7x = 700

C's share = 9x = 900

Finally, we can check that these add up to the total amount:

400 + 700 + 900 = 2000

Therefore, by the given ratio the answer will be R2000.

Learn more about the ratio here:

brainly.com/question/13419413

#SPJ2

1.4m/s is the rate that Roberto is walking. We know the formula for calculating the time i.e. t= d/r.

The term "distance" refers to how far we move. The rate is a measurement of our trip speed. Time is measured by how far we travel. The distance an object will travel over time and at a specific average rate is the subject of rate problems.

Given,

Distance = D

D= 1.4t

Rate= ?

Substituting the given values in the formula t= d/r

where,

t= time in seconds

d= distance

r= rate

We get,

t= 1.4t/r

t/1.4t= 1/r

t gets cancelled

so we have,

1/1.4= 1/r

r= 1.4m/s

Therefore, 1.4m/s is the rate at which Roberto is walking.

Learn more about Rate here: brainly.com/question/29781084

#SPJ4

The complete question is as follows:

Roberto is walking. The distance, D, in meters, he walks can be found using the equation D=1. 4t, where t is time in seconds.

What is the rate that Roberto's walking in meters per second?

Check the picture below.

Answer:

x=-3

Step-by-step explanation:

Answer:Given : number of hours spent studying for a history final exam and the score on that exam.

To Find : Which value is an outlier

(1.5, 65)

(3.5, 71)

(4.5, 98)

(6.5, 88)

Solution:

Number of hours spent studying =x            

Exam score   = y

x         y

1.5       65

2         68

3.5      71

4.5      98

6         82

1.5 -   2   difference = 0.5

2 - 3.5     difference = 1.5

3.5 - 4.5   difference = 1

4.5 - 6       difference = 1.5

No outlier

65  - 68   Difference  3

68 - 71      Difference  3

71 -  98      Difference  27

71 - 82     Difference  11

Hence 98 is outlier

(4.5    ,  98 )  is outlier

Learn More:

Mrs. Juarez graded ten English papers and recorded the scores. 92 ...

brainly.in/question/16382460

If the first quartile is 142 and the semi-interquartile range is 18, find ...

brainly.in/question/13279139

first quartile is 20 then semi-inter quartile range is

brainly.in/question/13187486

Step-by-step explanation:

Answer:

- [tex]\frac{8}{13}[/tex]

Step-by-step explanation:

let n be the other rational number , then

- [tex]\frac{26}{3}[/tex] n = [tex]\frac{16}{3}[/tex]

[a number × its reciprocal = 1 ]

multiply both sides by the reciprocal - [tex]\frac{3}{26}[/tex]

n = [tex]\frac{16}{3}[/tex] × - [tex]\frac{3}{26}[/tex]  ( cancel the 3 on numerator/ denominator )

n = - [tex]\frac{16}{26}[/tex] = - [tex]\frac{8}{13}[/tex]

a) The constant k is 5.427 x 10^−12 and its natural logarithm is -26.68.

b) The mean salary of the given model by using the probability density function is approximately $270.86.

a) The cumulative distribution function of the given random variable is provided as follows:

F(x) = {1−kx^−3 if x>44000, and 0 otherwise

The cumulative distribution function is given as

F(x) = 1−kx^−3 if x>44000 and F(x) = 0, if x≤44000i)

We need to check the value of the cumulative distribution function at 44000

We have, F(44000) = 0

0 = 1−k(44000)^−3

⇒ 1 = k(44000)^−3

⇒ k = 1/(44000)^−3

⇒ 5.427 x 10^−12

Taking the natural logarithm of k, we have ln(k) = −28.68 (approx.)

Hence, the constant k is 5.427 x 10^−12 and its natural logarithm to three decimal places is -28.68

b) The probability density function is given as,

f(x) = F'(x) = 3kx^−4, for x>44000 and f(x) = 0, otherwise

The mean or expected value of the random variable is given as

E(X) = ∫[−∞,∞]xf(x)dx

= ∫[44000,∞]x(3kx^−4)dx

= 3k∫[44000,∞]x^−3dx

= 3k[(−1/2)x^−2] [∞,44000]

= (3k/2)(44000)^−2

= 270.86 (approx.)

Therefore, the mean salary given by the model is $270.86 (approx.)

To know more about the "probability density function": https://brainly.com/question/15714810

#SPJ11

Answer:

Equation: 2(357+30×5) = 580

x=4

Step-by-step explanation:

In one package, there is such a relationship:

357+30X5 = y

(Y is the price of a package)

The price of two parcels is 580:

then. 24=580

y= 290

x=4, so: equation: 2(35x+150) =580

Step-by-step explanation:

A shopkeeper buys a number of books for Rs. 80. If he had bought 4 more for the same amount each book would have cost Rs. 1 less. How many books did he buy?

A

8

B

16

Correct Answer

C

24

D

28

Medium

Open in App

Updated on : 2022-09-05

Solution



Verified by Toppr

Correct option is B)

Let the shopkeeper buy x number of books. 

According to the given condition cost of x books =Rs80

Therefore cost of each book =x80

Again when he had brought 4 more books

Then total books in this case =x+4

So cost of each book in this case =x+480

According to Question, 

x80−x+480=1

x(x+4)80(x+4)−80x=1

x2+20x−16x−320=0

(x−16)(x+20)=0

x=16orx=−20

Hence the shopkeeper brought 16 books

A basis for the space of 2x2 lower triangular matrices is [tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex].

Lower triangular matrices resemble the following:

[tex]\left[\begin{array}{ccc}a&0\\b&c\end{array}\right][/tex]

We can write it like this:

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right][/tex]

This demonstrates the set's

[tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex]

covers the set of lower triangular matrices with dimensions 2x2. Moreover, these are linearly independent, so attempting to

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]=\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

leads to

[tex]\left[\begin{array}{ccc}a&0\\b&c\end{array}\right] =\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

which results in a = b = c = 0 right away. As there is no other way to

[tex]a\left[\begin{array}{ccc}1&0\\0&0\end{array}\right]+b\left[\begin{array}{ccc}0&0\\1&0\end{array}\right]+c\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]=\left[\begin{array}{ccc}0&0\\0&0\end{array}\right][/tex]

, these matrices are linearly independent if a = b = c = 0.

Since

[tex]\left(\left[\begin{array}{ccc}1&0\\0&0\end{array}\right],\left[\begin{array}{ccc}0&0\\1&0\end{array}\right],\left[\begin{array}{ccc}0&0\\0&1\end{array}\right]\right)[/tex]

they serve as a foundation by spanning the collection of 2x2 lower triangular matrices and being linearly independent.

To learn more about triangular matrices link is here

brainly.com/question/28325468

#SPJ4

The two-period moving average model and the two-period weighted moving average model are both common forecasting methods used to predict future demand. and we understand that the model with the lower MAD and MSE values will have the most accurate forecast.

To determine which model is better for this particular data set, we need to compare the accuracy of each model. To do this, we will calculate the Mean Absolute Deviation (MAD) and the Mean Squared Error (MSE) for each model.
For the two-period moving average model, we can calculate the forecast for period 7 by taking the average of p5 and 6:

Period 7 forecast = (Gallons in Period 5 + Gallons in Period 6)/2

For the two-period weighted moving average model, we can calculate the forecast for period 7 by using the weights of 0.6 and 0.4:

Period 7 forecast = (0.6 x Gallons in Period 5) + (0.4 x Gallons in Period 6)

We can then compare the accuracy of each model by calculating the MAD and MSE. To calculate MAD, we need to subtract the actual demand in each period from the forecasted demand and take the absolute value:

MAD = |Actual demand – Forecasted demand|

To calculate MSE, we need to square the differences between the actual demand and the forecasted demand:

MSE = (Actual demand – Forecasted demand)^2

After calculating the MAD and MSE for each model, we can compare the results to determine which model is better for this data set. The model with the lower MAD and MSE values will have the most accurate forecast.

For more such questions on forecast

https://brainly.com/question/24730207

#SPJ11

Answer:

Here, x represents the amount (in liters) of the 25% saline solution to be added.

We can see that the 25% saline solution needs to be mixed with the 10% saline solution to obtain a mixture that is 15% saline. The ratio of the volumes of the 25% and 10% solutions can be found by subtracting the concentrations of the two solutions and dividing by the difference between the desired concentration and the concentration of the 10% solution:

x / (3.33 - x) = (15 - 10) / (25 - 10) = 5/15 = 1/3

Multiplying both sides by 3.33 - x, we get:

x = (1/3) (3.33 - x)

Multiplying both sides by 3, we get:

3x = 3.33 - x

Solving for x, we get:

x = 0.833 liters

Therefore, 0.833 liters of the 25% saline solution must be added to 3.33 liters of the 10% saline solution to obtain 4.163 liters of a 15% saline solution.

Step-by-step explanation:

Answer:

[tex]735 = 3 \times 5 \times {7}^{2} [/tex]

Step-by-step explanation:

[tex]735 = 7 \times 105[/tex]

[tex]735 = 7 \times 3 \times 35[/tex]

[tex]735 = 7 \times 3 \times 5 \times 7[/tex]

[tex]735 = 3 \times 5 \times {7}^{2} [/tex]

Answer:

D

Step-by-step explanation:

The square root of 50 is approximately equal to 7.07

-7.1111… can be rounded to -7.11

23/3 is equal to approximately 7.67

-7 1/5 is equal to -7.2

Measure of last angle of triangle is 117°

The triangle's characteristics include:

The angle sum property states that the sum of a triangle's three interior angles is always 180 degrees.

Angle of Triangle are

28° and 35°

Let the third angle be x

According to angle sum property

28°+35°+x=180°

x=117°

Measure of last angle of triangle is 117°

To know more about degrees, visit:

https://brainly.com/question/364572

#SPJ1

The complete question is;

Find the measure of the last angle of the triangle below.

28⁰

35°

Image is attached below.

Solving for Cartesian product n(B), we have n(B) = 72 / 24 = 3.

The Cartesian product is a mathematical operation that takes two sets and produces a set of all possible ordered pairs of elements from both sets.

In other words, if A and B are two sets, their Cartesian product (written as A × B) is the set of all possible ordered pairs (a, b) where a is an element of A and b is an element of B.

For example, if A = {1, 2} and B = {3, 4}, then A × B = {(1, 3), (1, 4), (2, 3), (2, 4)}.

By the question.

We know that n (Ax B) represents the number of elements in the set obtained by taking the Cartesian product of sets A and B.

Using the formula for the size of the Cartesian product, we have:

n (Ax B) = n(A) x n(B)

Substituting the given values, we get: 72 = 24 x n(B)

To learn more about set:

https://brainly.com/question/8053622

#SPJ1

Answer:

The sequence is defined as follows:

a1 = 5

an = an-1 - 5, for n > 1

Using this definition, we can find the first four terms of the sequence as follows:

a1 = 5

a2 = a1 - 5 = 5 - 5 = 0

a3 = a2 - 5 = 0 - 5 = -5

a4 = a3 - 5 = -5 - 5 = -10

Therefore, the first four terms of the sequence are: 5, 0, -5, -10.

In order to make the same amount of money, they would have to each sell 5 bicycles. They would both make $500

To find the number of bicycles they would need to sell to make the same amount of money,

We can set Jim's and Tom's weekly earnings equal to each other and solve for the number of bicycles:

250 + 50x = 400 + 20x

30x = 150

x = 5

So they would need to sell 5 bicycles to make the same amount of money.

To find out how much money they would make for selling 5 bicycles, we can substitute x = 5 into either equation.

Let's use Jim's equation:

250 + 50(5) = 500

So they would make $500 for selling 5 bicycles.

Read more about linear relation at

https://brainly.com/question/4074386

#SPJ1

Answer: Xavier will receive $3.21 in change.

Step-by-step explanation:

To find the change Xavier receives, we need to subtract the cost of the dog collar from the amount he paid with his $10 bill:

Change = $10 - $6.79 = $3.21

Therefore, Xavier will receive $3.21 in change.

To place two bench press machines in a small area, you will need a space of approximately 10 feet by 10 feet. Let's discuss it in detail below. Here are the dimensions of the bench press machine, which can help determine the amount of space required to fit two bench press machines in a small area:

The length of the bench press machine is between 48 inches and 54 inches.

The width of the bench press machine is between 28 inches and 32 inches.

The height of the bench press machine is between 48 inches and 56 inches.

Based on the above dimensions of the bench press machine, two machines can be placed in a small area of 10 feet by 10 feet. However, for safe use, the following guidelines should be followed:

There should be at least 6 feet of distance between the two bench press machines. There should be at least 3 feet of clearance in the front of the bench press machine to allow for safe movement during exercises. There should be at least 2 feet of clearance behind the bench press machine to allow for a safe exit in case of an emergency.

Thus, to place two bench press machines in a small area, you will need a space of approximately 10 feet by 10 feet.

To learn more about area refer :

https://brainly.com/question/27683633

#SPJ11

Answer:

Step-by-step explanation:

C.) P = 3(a+2)-4

The formula which describes the relation between the height of the apple tree and the height of the pine tree p is P=3(a+2)-4, the correct option is C.

A linear equation is an equation that has the variable of the highest power of 1. The standard form of a linear equation is of the form Ax + B = 0.

We are given that;

Growth of apple tree= 2feet

Now,

Let's call the original height of the apple tree "h". According to the problem, if the apple tree grew 2 feet and then tripled its height, it would become 4 feet shorter than the pine tree. So we can write:

3(h+2) - 4 = p

Simplifying, we get:

3h + 2 = p

Now we can see that option (D) P=3a+10 is very similar to our expression, but it has a constant term of 10 instead of 2. This constant term does not match the problem statement, which says that the apple tree would be 4 feet shorter than the pine tree, not taller. Therefore, option (D) is not the correct answer.

Option (A) P-4=3a+2 also does not match the problem statement. If we solve for p, we get:

P = 3a + 6

This means that the apple tree would be 6 feet shorter than the pine tree, not 4 feet shorter as stated in the problem.

Option (B) P=2(a+3)+4 also does not match the problem statement. If we solve for p, we get:

P = 2a + 10

This means that the apple tree would be 10 feet shorter than the pine tree, not 4 feet shorter as stated in the problem.

Option (C) P=3(a+2)-4 matches our expression from earlier. If we solve for p, we get:

P = 3a + 2

Therefore, by equation the answer will be P=3(a+2)-4.

Learn more about linear equations;

https://brainly.com/question/10413253

#SPJ2

The hypotheses for a chi-square test of independence on the data that auditors compared opinions about treatment (very good/acceptable/poor) at four VA hospitals (labeled a,b,c,d) among veterans aged 50 and above are:

Null hypothesis, H0: There is no association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Alternative hypothesis, Ha: There is an association between the opinions about treatment of the VA hospitals and veterans aged 50 and above.

Hypothesis Testing is a type of statistical analysis in which you put your assumptions about a population parameter to the test. It is used to estimate the relationship between 2 statistical variables.

An analyst performs hypothesis testing on a statistical sample to present evidence of the plausibility of the null hypothesis. Measurements and analyses are conducted on a random sample of the population to test a theory. Analysts use a random population sample to test two hypotheses: the null and alternative hypotheses.

To learn more about null and alternative hypothesis refer :

https://brainly.com/question/27335001

#SPJ11

Answer:

9 words

Step-by-step explanation:

We know

He has 12 words to memorize, and he is 3/4 done.

How many words has Pablo memorized so far​?

We Take

12 x 3/4 = 9 words

So, Pable has memorized 9 words.

Answer:

Step-by-step explanation:

Perimeter

Pls mark me brainliest

The smallest number of beads we can take so that the conditions for performing inference are met is 40.

Probability:

The probability of an event is a number that indicates the probability of the event occurring. Expressed as a number between 0 and 1 or as a percent sign between 0% and 100%. The more likely an event is to occur, the greater its probability. The probability of an impossible event is 0; the probability of a certain event occurring is 1. The probability of two complementary events A and B - A occurring or B occurring - adds up to 1.

According to the Question:

Given in the question,

Teacher prepares a large container filled with colored beads. She claims that 1/8 beads are red, 1/4are blue, and the rest are yellow. Your class will test the teacher's claim by randomly drawing a simple sample of beads from the container.

Quadrant                     Frequency

      1                                    18

      2                                   22

      3                                   39

      4                                   21

The proportions are 1/8 , 1/4 and 5/8

Here, the smallest probability is 1/8 , thus it would be used to compute the frequency.

Now,

The expected frequencies are calculated as:

E = np₁ = 15 (1/8) = 1.875

E = np₂ = 16(1/8) = 2

E = np₃ = 30(1/8) = 3.75

E = np₄ = 40(1/8) = 5

E = np₅ = 80(1/8) = 10

Here, conditions are fulfilling for 40 and 90 but the smallest sample size is contained by 40. Thus, the correct option is 40.

Learn more about Number:

https://brainly.com/question/17429689

#SPJ4

Explanation:

Use the pythagorean trig identity to determine sine based on cos(theta) = 0.6

[tex]\sin^2(\theta)+\cos^2(\theta) = 1\\\\\sin^2(\theta)=1-\cos^2(\theta)\\\\\sin(\theta)=\pm\sqrt{1-\cos^2(\theta)}\\\\\sin(\theta)=-\sqrt{1-\cos^2(\theta)} \ \ \text{....sine is negative in quadrant Q4}\\\\\sin(\theta)=-\sqrt{1-(0.6)^2}\\\\\sin(\theta)=-\sqrt{1-0.36}\\\\\sin(\theta)=-\sqrt{0.64}\\\\\sin(\theta)=-0.8\\\\[/tex]

Since [tex]\cos(\theta)=0.6 \text{ and } \sin(\theta)=-0.8[/tex], the location of point P is (0.6, -0.8)

Recall that for any point (x,y) on the unit circle, we have:

[tex]\text{x}=\cos(\theta)\\\\\text{y}=\sin(\theta)[/tex]

meaning cosine is listed first in any (x,y) pairing.

For the given functions, f(x)=x²+3x-7, g(x)=3x+5 and h(x)=2x²-4, f(g(x))= 9x² + 30x + 33, h(g(x))= 18x² + 60x + 46, (h-f)(x)= x² - 3x + 3, (f+g)(x)= x² + 6x - 2.

In mathematics, a function is a mathematical object that takes an input (or several inputs) and produces a unique output. It is a relationship between a set of inputs, called the domain, and a set of outputs, called the range.

Formally, a function f is defined by a set of ordered pairs (x, y) where x is an element of the domain, and y is an element of the range, and each element x in the domain is paired with a unique element y in the range. We write this as f(x) = y.

Functions can be represented in various ways, such as algebraic expressions, tables, graphs, or verbal descriptions. They can be linear or nonlinear, continuous or discontinuous, and may have various properties such as symmetry, periodicity, and asymptotic behavior.

To solve these problems, we substitute the function g(x) for x in f(x) and h(x) and simplify the resulting expressions.

f(g(x)):

f(g(x)) = f(3x+5) = (3x+5)² + 3(3x+5) - 7 (using the definition of f(x))

= 9x² + 30x + 33

h(g(x)):

h(g(x)) = h(3x+5) = 2(3x+5)² - 4 (using the definition of h(x))

= 18x² + 60x + 46

(h-f)(x):

(h-f)(x) = h(x) - f(x) = (2x² - 4) - (x² + 3x - 7) (using the definitions of h(x) and f(x))

= x² - 3x + 3

(f+g)(x):

(f+g)(x) = f(x) + g(x) = x² + 3x - 7 + 3x + 5 (using the definitions of f(x) and g(x))

= x² + 6x - 2

When multiplying out a squared term, such as (3x+5)², we can use the FOIL method, which stands for First, Outer, Inner, Last. We multiply the first terms, then the outer terms, then the inner terms, and finally the last terms, and then add up the results. For example:

(3x+5)² = (3x)(3x) + (3x)(5) + (5)(3x) + (5)(5)

= 9x² + 15x + 15x + 25

= 9x² + 30x + 25

To know more about expressions visit:

https://brainly.com/question/29246179

#SPJ1

Answer:

The diver descends:

50 seconds x 5 feet/second = 250 feet

The diver ascends:

54 seconds x 4.4 feet/second = 237.6 feet

Therefore, the total change in elevation is:

250 feet (descent) - 237.6 feet (ascent) = 12.4 feet

So, the diver's final elevation is:

0 feet (starting elevation) - 12.4 feet (change in elevation) = -12.4 feet

Therefore, the diver ends up 12.4 feet below sea level.

Answer:

it is 1

Step-by-step explanation:

its is 1 2 3 hsvs jafsnsjhd jsusgsmsi jshsbjdg

Therefore, the compound inequality for the diameter of the washers is: 3.150 ≤ d ≤ 3.240.

In mathematics, an inequality is a statement that compares two values or expressions, indicating that one is greater than, less than, or equal to the other. The symbols used to represent inequalities are:

">" which means "greater than"

"<" which means "less than"

"≥" which means "greater than or equal to"

"≤" which means "less than or equal to"

Inequalities can be solved by applying algebraic techniques, such as adding, subtracting, multiplying, or dividing both sides of the inequality by the same number. The solution to an inequality is a range of values that satisfy the inequality.

Here,

The formula for the circumference of a circle in terms of its diameter is:

C = πd

where π (pi) is approximately 3.14.

We are given that the acceptable range for the circumference of the washer is 9.9 ≤ C ≤ 10.2 centimeters. Substituting C = 3.14d into this inequality, we get:

9.9 ≤ 3.14d ≤ 10.2

Dividing all sides of the inequality by 3.14, we obtain:

3.15 ≤ d ≤ 3.24

Rounding to three decimal places, the corresponding interval for the diameters of the washers is:

3.150 ≤ d ≤ 3.240

To know more about inequality,

https://brainly.com/question/30238773

#SPJ1

Answer:

The associated growth factor for a 30% increase is 1 + 0.30 = 1.30.

The associated growth factor for a 30% decrease is 1 - 0.30 = 0.70.

The associated growth factor for a 2% increase is 1 + 0.02 = 1.02.

The associated growth factor for a 2% decrease is 1 - 0.02 = 0.98.

The associated growth factor for a 0.04% increase is 1 + 0.0004 = 1.0004.

The associated growth factor for a 0.04% decrease is 1 - 0.0004 = 0.9996.

The associated growth factor for a 100% increase is 1 + 1 = 2.

Step-by-step explanation:

A growth factor is a multiplier that represents the amount by which a quantity changes as a result of a growth rate or percentage change. It is calculated by adding 1 to the decimal form of the growth rate. For example, if the growth rate is 30%, the decimal form is 0.30, and the growth factor is 1 + 0.30 = 1.30.

In case of a decrease, the growth factor is calculated by subtracting the decimal form of the decrease rate from 1. For example, if the decrease rate is 30%, the decimal form is 0.30, and the growth factor is 1 - 0.30 = 0.70.

In cases where the growth rate is a small percentage, it is important to convert it into a decimal by dividing the percentage by 100 before calculating the growth factor.

In the case of a 100% increase, the quantity doubles, so the growth factor is 2 (i.e., 1 + 1).

The baseball thrown upwards will experience a change in its velocity while its acceleration will be constant.

A type of motion known as upward motion involves an item moving up against the pull of gravity.

The opposing force of gravity causes an object to go upward with a decreasing vertical velocity as it does so. When the item reaches its maximum height, its velocity ultimately zeroes out. The velocity starts to rise as the object starts to descend and eventually reaches its highest point just before impact with the ground.

The object's acceleration during its upward motion is constant and always points downward. Hence, it follows that an item moving upwards will experience a change in velocity but not in acceleration.

Learn more about Maximum Height here: brainly.com/question/29081143

#SPJ4

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

The triangle inequality theorem explains the relationship between the three sides of a triangle. This theorem states that for any triangle, the sum of the lengths of the first two sides is always larger than the length of the third side.

Let x be the length of the third side. By the triangle inequality, we have:

3 + 16 > x and 16 + x > 3 and 3 + x > 16

Simplifying, we get:

19 > x and x > 13 and x < 19

The largest possible whole-number length for the third side is 18, which satisfies all three inequalities.

To know more about Inequality visit:

brainly.com/question/30228778

#SPJ1