Describe how you expect the waveform and the sound you hear changes when you hit the tuning fork harder.

Answers

Answer 1

Answer:

In a tuning fork, two basic qualities of sound are considered, they are

1) The pitch of the waveform: This pitch depends on the frequency of the wave generated by hitting the tuning fork.

2) The loudness of the waveform: This loudness depends on the intensity of the wave generated by hitting the tuning fork.

Hitting the tuning fork harder will make it vibrate faster, increasing the number of vibrations per second. The number of vibration per second is proportional to the frequency, so hitting the tuning fork harder increase the frequency. From the explanation on the frequency above, we can say that by increasing the frequency the pitch of the tuning fork also increases.

Also, hitting the tuning fork harder also increases the intensity of the wave generated, since the fork now vibrates faster. This increases the loudness of the tuning fork.


Related Questions

Three crates with various contents are pulled by a force Fpull=3615 N across a horizontal, frictionless roller‑conveyor system. The group of boxes accelerates at 1.516 m/s2 to the right. Between each adjacent pair of boxes is a force meter that measures the magnitude of the tension in the connecting rope. Between the box of mass m1 and the box of mass m2, the force meter reads F12=1387 N. Between the box of mass m2 and the box of mass m3, the force meter reads F23=2304 N. Assume that the ropes and force meters are massless.

Answers

The question is incomplete. Here is the complete question.

Three crtaes with various contents are pulled by a force Fpull=3615N across a horizontal, frictionless roller-conveyor system.The group pf boxes accelerates at 1.516m/s2 to the right. Between each adjacent pair of boxes is a force meter that measures the magnitude of the tension in the connecting rope. Between the box of mass m1 and the box of mass m2, the force meter reads F12=1387N. Between the box of mass m2 and box of mass m3, the force meter reads F23=2304N. Assume that the ropes and force meters are massless.

(a) What is the total mass of the three boxes?

(b) What is the mass of each box?

Answer: (a) Total mass = 2384.5kg;

               (b) m1 = 915kg;

                   m2 = 605kg;

                   m3 = 864.5kg;

Explanation: The image of the boxes is described in the picture below.

(a) The system is moving at a constant acceleration and with a force Fpull. Using Newton's 2nd Law:

[tex]F_{pull}=m_{T}.a[/tex]

[tex]m_{T}=\frac{F_{pull}}{a}[/tex]

[tex]m_{T}=\frac{3615}{1.516}[/tex]

[tex]m_{T}=2384.5[/tex]

Total mass of the system of boxes is 2384.5kg.

(b) For each mass, analyse each box and make them each a free-body diagram.

For [tex]m_{1}[/tex]:

The only force acting On the [tex]m_{1}[/tex] box is force of tension between 1 and 2 and as all the system is moving at a same acceleration.

[tex]m_{1} = \frac{F_{12}}{a}[/tex]

[tex]m_{1} = \frac{1387}{1.516}[/tex]

[tex]m_{1}[/tex] = 915kg

For [tex]m_{2}[/tex]:

There are two forces acting on [tex]m_{2}[/tex]: tension caused by box 1 and tension caused by box 3. Positive referential is to the right (because it's the movement's direction), so force caused by 1 is opposing force caused by 3:

[tex]m_{2} = \frac{F_{23}-F_{12}}{a}[/tex]

[tex]m_{2} = \frac{2304-1387}{1.516}[/tex]

[tex]m_{2}[/tex] = 605kg

For [tex]m_{3}[/tex]:

[tex]m_{3} = m_{T} - (m_{1}+m_{2})[/tex]

[tex]m_{3} = 2384.5-1520.0[/tex]

[tex]m_{3}[/tex] = 864.5kg

An elderly sailor is shipwrecked on a desert island but manages to save his eyeglasses. The lens for one eye has a power of 1.28 diopters, and the other lens has a power of 8.50 diopters. What is the magnifying power of the telescope he can construct with these lenses

Answers

10.88 is the answer to the question

A body is thrown vertically upwards with a speed of 95m / s and after 7s it reaches its maximum height. How fast does it reach its maximum height? What was the maximum height reached?

Answers

Explanation:

u = 95 m/sec ( Initial speed)

t = 7 sec ( Time of ascent)

According to Equations of Motion :

[tex]s = ut - \frac{1}{2} g {t}^{2} [/tex]

Max. Height = 95 * 7 - 4.9 * 49 = 424. 9 = 425 m

Answer:

332.5 m

Explanation:

At the maximum height, the velocity is 0.

Given:

v₀ = 95 m/s

v = 0 m/s

t = 7 s

Find: Δy

Δy = ½ (v + v₀) t

Δy = ½ (0 m/s + 95 m/s) (7 s)

Δy = 332.5 m

In order to waken a sleeping child, the volume on an alarm clock is doubled. Under this new scenario, how much more energy will be striking the child's ear drums each second?

Answers

Answer:4 times more energy will be striking the childbearing

Explanation:

Because Volume is directly proportional to amplitude of sound. Energy is proportional to amplitude squared. If you triple the amplitude, you multiply the energy by 4

Suppose a certain laser can provide 82 TW of power in 1.1 ns pulses at a wavelength of 0.24 μm. How much energy is contained in a single pulse?

Answers

Answer:

The energy contained in a single pulse is 90,200 J.

Explanation:

Given;

power of the laser, P = 82 TW = 82 x 10¹² W

time taken by the laser to provide the power, t = 1.1 ns = 1.1 x 10⁻⁹ s

the wavelength of the laser, λ = 0.24 μm = 0.24 x 10⁻⁶ m

The energy contained in a single pulse is calculated as;

E = Pt

where;

P is the power of each laser

t is the time to generate the power

E = (82 x 10¹²)(1.1 x 10⁻⁹)

E = 90,200 J

Therefore, the energy contained in a single pulse is 90,200 J

One solenoid is centered inside another. The outer one has a length of 54.0 cm and contains 6750 coils, while the coaxial inner solenoid is 4.00 cm long and 0.170 cm in diameter and contains 21.0 coils. The current in the outer solenoid is changing at 35.0 A/s .What is the mutual inductance of the solenoids?Find the emf induced in the inner solenoid.

Answers

Answer:

 M₁₂ = 1.01 10⁻⁴ H ,   Fem = 3.54 10⁻³ V

Explanation:

The mutual inductance between two systems is

        M₁₂ = N₂ Ф₁₂ / I₁

where N₂ is the number of turns of the inner solenoid N₂ = 21.0, i₁ the current that flows through the outer solenoid I₁ = 35.0 A / s and fi is the flux of the field of coil1 that passes through coil 2

         

the magnetic field of the coil1 is

   B = μ₀ n I₁ = μ₀ N₁/l   I₁

the flow is

             Φ = B A₂

the area of ​​the second coil is

             A₂ = π d₂ / 4

             Φ = μ₀ N₁ I₁ / L  π d² / 4

we substitute in the first expression

            M₁₂ = N₂ μ₀ N₁ / L    π d² / 4

            M₁₂ = μ₀ N₁ N₂ π d² / 4L

           d = 0.170 cm = 0.00170 m

            L = 4.00 cm = 0.00400 m

let's calculate

            M₁₂ = 4π 10⁻⁷ 6750  21 π 0.0017²/ (4 0.004)

             M₁₂ = π² 0.40966 10⁻⁷ / 0.004

             M₁₂ = 1.01 10⁻⁴ H

The electromotive force is

              Fem = - M dI₁ / dt

              Fem = - 1.01 10⁻⁴ 35.0

              Fem = 3.54 10⁻³ V

A system gains 767 kJ of heat, resulting in a change in internal energy of the system equal to +151 kJ. How much work is done?

Answers

Answer:

The work done on the system is -616 kJ

Explanation:

Given;

Quantity of heat absorbed by the system, Q = 767 kJ

change in the internal energy of the system, ΔU = +151 kJ

Apply the first law of thermodynamics;

ΔU = W + Q

Where;

ΔU  is the change in internal energy

W is the work done

Q is the heat gained

W = ΔU  - Q

W = 151 - 767

W = -616 kJ (The negative sign indicates that the work is done on the system)

Therefore, the work done on the system is -616 kJ

How could a country benefit from making it into space?

Answers

Answer:

space exploration pays off in goods, technology, and paychecks. The work is done by people who are paid to do it here on Earth. The money they receive helps them buy food, get homes, cars, and clothing. They pay taxes in their communities, which helps keep schools going, roads paved, and other services that benefit a town or city. The money may be spent to send things "up there", but it gets spent "down here." It spreads out into the economy.

In a LRC circuit, a second capacitor is connected in parallel with the capacitor previously in the circuit. What is the effect of this change on the impedance of the circuit

Answers

Answer:

Impedance increases for frequencies below resonance and decreases for the frequencies above resonance

Explanation:

See attached file

Explanation:

A guitar string is 90 cm long and has a mass of 3.5g . The distance from the bridge to the support post is L=62cm, and the string is under a tension of 540N . What are the frequencies of the fundamental and first two overtones? Express your answers using two significant figures. Enter your answers in ascending order separated by commas.

Answers

Answer:

[tex]v_1 = 301 Hz[/tex]

[tex]v_2 = 601 \ \ Hz[/tex]

[tex]v_3 = 901 \ Hz[/tex]

Explanation:

From the question we are told that

     The  length of the string is  [tex]l = 90 \ cm = 0.9 \ m[/tex]

     The mass of the string is  [tex]m_s = 3.5 \ g =0.0035 \ kg[/tex]

     The  distance  from the bridge to the support post [tex]L = 62 \ c m = 0.62 \ m[/tex]

    The tension is [tex]T = 540 \ N[/tex]

Generally the frequency is mathematically represented as

        [tex]v = \frac{n}{2 * L } [\sqrt{ \frac{T}{\mu} } ][/tex]

Where n is and integer that defines that overtones

i.e  n =   1 is for fundamental frequency

      n =  2   first overtone

       n =3   second overtone

Also  [tex]\mu[/tex] is the linear density of the string which is mathematically represented as

           [tex]\mu = \frac{m_s}{l}[/tex]

=>        [tex]\mu = \frac{0.0035 }{ 0.9 }[/tex]

=>       [tex]\mu = 0.003889 \ kg/m[/tex]

So for   n = 1

     [tex]v_1 = \frac{1}{2 * 0.62 } [\sqrt{ \frac{ 540}{0.003889} } ][/tex]

     [tex]v_1 = 301 \ Hz[/tex]

So for  n =  2

     [tex]v_2 = \frac{2}{2 * 0.62 } [\sqrt{ \frac{ 540}{0.003889} } ][/tex]

     [tex]v_2 = 601 \ Hz[/tex]

So for  n =  3

     [tex]v_3 = \frac{3}{2 * 0.62 } [\sqrt{ \frac{ 540}{0.003889} } ][/tex]

     [tex]v =901 \ Hz[/tex]

     

       

Two wires carry current I1 = 73 A and I2 = 31 A in the opposite directions parallel to the x-axis at y1 = 3 cm and y2 = 13 cm. Where on the y-axis (in cm) is the magnetic field zero?

Answers

Answer:

The position on the y-axis where the magnetic field is zero is at y = 10 cm

Explanation:

The magnetic field B due to a long straight wire carrying a current, i at a distance R from the wire is given by

B = μ₀i/2πR

Now, let y be the point where the magnetic fields of both wires are equal.

So, the magnetic field due to wire 1 carrying current i₁ = 73 A is

B₁ = μ₀i₁/2π(y - 3) and

the magnetic field due to wire 2 carrying current i₂ = 31 A is

B₂ = μ₀i₂/2π(13 - y)

At the point where the magnetic field is zero, B₁ = B₂. So,

μ₀i₁/2π(y - 3) = μ₀i₂/2π(13 - y)

cancelling out μ₀ and 2π, we have

i₁/(x - y) = i₂/(13 - y)

cross-multiplying, we have

(13 - y)i₁ = (y - 3)i₂

Substituting the values of i₁ and i₂, we have

(13 - y)73 = (y - 3)31

949 - 73y = 31y - 93

Collecting like terms, we have

949 + 93 = 73y + 31y

1042 = 104y

dividing through by 104, we have

y = 1042/104

y = 10.02 cm

y ≅ 10 cm

So, the position on the y-axis where the magnetic field is zero is at y = 10 cm

Coherent light with wavelength 601 nm passes through two very narrow slits, and the interference pattern is observed on a screen a distance of 3.00 m from the slits. The first-order bright fringe is a distance of 4.84 mm from the center of the central bright fringe. For what wavelength of light will thefirst-order dark fringe be observed at this same point on the screen?

Answers

Answer:

The wavelength is  [tex]\lambda = 1805 nm[/tex]

Explanation:

From the question we are told that

    The wavelength of the light is  [tex]\lambda = 601 \ nm = 601 *10^{-9} \ m[/tex]

     The  distance of the screen is  D  =  3.0  m

     The  fringe width is  [tex]y = 4.84 \ mm = 4.84 *10^{-3} \ m[/tex]

     

Generally the fringe width for a bright fringe  is mathematically represented as

          [tex]y = \frac{ \lambda * D }{d }[/tex]  

=>     [tex]d = \frac{ \lambda * D }{ y }[/tex]

=>     [tex]d = \frac{ 601 *10^{-9} * 3}{ 4.84 *10^{-3 }}[/tex]

=>     [tex]d = 0.000373 \ m[/tex]

Generally the fringe width for a dark fringe  is mathematically represented as

      [tex]y_d = [m + \frac{1}{2} ] * \frac{\lambda D }{d }[/tex]

Here  m = 0  for  first order dark fringe

   So  

         [tex]y_d = [0 + \frac{1}{2} ] * \frac{\lambda D }{d }[/tex]

looking at which we see that   [tex]y_d = y[/tex]

         [tex]4.84 *10^{-3} = [0 + \frac{1}{2} ] * \frac{\lambda * 3 }{ 0.000373 }[/tex]

=>    [tex]\lambda = 1805 *10^{-9} \ m[/tex]

=>    [tex]\lambda = 1805 nm[/tex]

Intelligent beings in a distant galaxy send a signal to earth in the form of an electromagnetic wave. The frequency of the signal observed on earth is 2.2% greater than the frequency emitted by the source in the distant galaxy. What is the speed vrel of the galaxy relative to the earth

Answers

Answer:

Vrel= 0.75c

Explanation:

See attached file

A radar pulse returns 3.0 x 10-4 seconds after it is sent out, having been reflected by an object. What is the distance between the radar antenna and the object

Answers

Answer:

The distance is  [tex]D = 45000 \ m[/tex]

Explanation:

From the question we are told that

    The time taken is  [tex]t = 3.0 *10^{-4 } \ s[/tex]

   

Generally the speed of the radar is equal to the speed of light and this has a value  

      [tex]c = 3.0*10^{8} \ m /s[/tex]

Now the distance covered by the to and fro movement of the radar is mathematically evaluated as

      [tex]d = c * t[/tex]

=>    [tex]d = 3.0*10^{8} * 3.0*10^{-4}[/tex]

=>  [tex]d = 90000 \ m[/tex]

Therefore the distance between the radar antenna and the object is  

      [tex]D = \frac{d}{2}[/tex]

       [tex]D = \frac{ 90000}{2}[/tex]

      [tex]D = 45000 \ m[/tex]

The distance between the radar antenna and the object will be 45000 m.

What is a radar antenna?

A radar antenna is a device that sends out radio waves and listens for their reflections. The ability of an antenna to identify the exact direction in which an item is placed determines its performance.

The given data in the problem is;

t is the time=  3.0 x 10⁻⁴

d is the distance between the radar antenna and the object=?

c is the peed of light=3×10⁸ m/sec

The radar's speed is usually equal to the speed of light, and this has a value. The distance covered by the radars to and fro movement is now calculated mathematically as

[tex]\rm d= c \times t \\\\ \rm d= 3.0 \times 10^8 \times 3.0 \times 10^{-4} \\\\ d=90000 \ m[/tex]

As a result, the radar antenna's distance from the target is

[tex]\rm D=\frac{d}{2} \\\\ \rm D=\frac{90000}{2} \\\\ \rm D=\ 45000 \ m[/tex]

Hence the distance between the radar antenna and the object will be 45000 m.

To learn more about the radar antena refer to the link;

https://brainly.com/question/24067190

Determine the orbital period (in hours) of an observation satellite in a circular orbit 1,787 km above Mars.

Answers

Answer:

T = 3.14 hours

Explanation:

We need to find the orbital period (in hours) of an observation satellite in a circular orbit 1,787 km above Mars.

We know that the radius of Mars is 3,389.5 km.

So, r = 1,787 + 3,389.5 = 5176.5 km

Using Kepler's law,

[tex]T^2=\dfrac{4\pi ^2}{GM}r^3[/tex]

M is mass of Mars, [tex]M=6.39\times 10^{23}\ kg[/tex]

So,

[tex]T^2=\dfrac{4\pi ^2}{6.67\times 10^{-11}\times 6.39\times 10^{23}}\times (5176.5 \times 10^3)^3\\\\T=\sqrt{\dfrac{4\pi^{2}}{6.67\times10^{-11}\times6.39\times10^{23}}\times(5176.5\times10^{3})^{3}}\\\\T=11334.98\ s[/tex]

or

T = 3.14 hours

So, the orbital period is 3.14 hours

An object is placed in a room where the temperature is 20 degrees C. The temperature of the object drops by 5 degrees C in 4 minutes and by 7 degrees C in 8 minutes. What was the temperature of the object when it was initially placed in the room

Answers

Answer:

28.3°C

Explanation:

Using

T(t) = (T(0) - 20)*(e^(-k*t)) + 20

for some positive number k, and some initial temperature T(0).

Boundary conditions:

T(4) = T(0) - 5 _______ (i)

T(8) = T(0) - 7 _______ (ii)

==> solving for T(0) and k :

(i):

(T(0) - 20)*(e^(-k*4)) + 20 = T(0) - 5 ==>

(T(0) - 20)*(e^(-k*4)) = T(0) - 20 - 5

(T(0) - 20)*(e^(-k*4)) = (T(0) - 20) - 5

5 = (T(0) - 20) - (T(0) - 20)*(e^(-k*4))

5 = (T(0) - 20) * ( 1 - e^(-k*4) )

(ii):

(T(0) - 20)*(e^(-k*8)) + 20 = T(0) - 7

(T(0) - 20)*(e^(-k*8)) = (T(0) - 20) - 7

7 = (T(0) - 20) - (T(0) - 20)*(e^(-k*8))

7 = (T(0) - 20) * (1 - e^(-k*8))

In both results, subsitute x = e^(-4k) and C = (T(0) - 20)

(i): 5 = C * (1 - x)

(ii): 7 = C * (1 - x^2) = C * (1-x)*(1+x)

Substitute C*(1-x) from (i) into (ii):

(ii): 7 = 5*(1+x) ==> (1+x) = 7/5 ==> x = 2/5

back into (i):

(i): 5 = C * (1 - 2/5) ==> 5 = C * 3/5 ==> C = 25/3

C = T(0) - 20 ==>

T(0) = C + 20 = 25/3 + 20 = 25/3 + 60/3 = 85/3

= 28.3°C

A 5.0 kg block hangs from a spring with spring constant 2000 N/m. The block is pulled down 5.0 cm from the equilibrium position and given an initial velocity of 1.0 m/s back towards equilibrium. a) What is the total mechanical energy of the motion

Answers

Answer:

Explanation:i think this would help u

A fish is 11.9 cm from the front surface of a fish bowl of radius 33 cm. Where does the fish appear to be to someone in air viewing it from in front of the bowl

Answers

Answer:

The fish would appear 42.7 cm on the left side from the front of the bowl.

Explanation:

The fish (object) distance = 11.9 cm, radius of curvature of the bowl = 33 cm. The distance of image of the fish (image distance) can be determined by applying the mirror formula;

[tex]\frac{1}{f}[/tex] = [tex]\frac{1}{u}[/tex] + [tex]\frac{1}{v}[/tex]

where f is the focal length of the reflecting surface, u is the object distance and v is the image distance.

But, f = [tex]\frac{radius of curvature}{2}[/tex]

         = [tex]\frac{33}{2}[/tex]

       f = 16.5 cm

Substitute f = 16.5 = [tex]\frac{165}{10}[/tex], and u = 11.9 = [tex]\frac{119}{10}[/tex] in equation 1;

[tex]\frac{10}{165}[/tex] = [tex]\frac{10}{119}[/tex] + [tex]\frac{1}{v}[/tex]

[tex]\frac{1}{v}[/tex] = [tex]\frac{10}{165}[/tex] - [tex]\frac{10}{119}[/tex]

  = [tex]\frac{1190 - 1650}{19635}[/tex]

[tex]\frac{1}{v}[/tex] = [tex]\frac{-460}{19635}[/tex]

⇒ v  = [tex]\frac{19635}{-460}[/tex]

       = -42.6848

    v = 42.7 cm

The fish would appear 42.7 cm on the left side from the front of the bowl.

PLEASE HELP FAST Five-gram samples of brick and glass are at room temperature. Both samples receive equal amounts of energy due to heat flow. The specific heat capacity of brick is 0.22 cal/g°C and the specific heat capacity of glass is 0.22 cal/g°C. Which of the following statements is true? 1.The temperature of each sample will increase by the same amount. 2.The temperature of each sample will decrease by the same amount. 3.The brick will get hotter than the glass. 4.The glass will get hotter than the brick.

Answers

Answer:

1.The temperature of each sample will increase by the same amount

Explanation:

This is because, since their specific heat capacities are the same and we have the same mass of each substance, and the same amount of energy due to heat flow is supplied to both the glass and brick at room temperature, their temperatures would thereby increase by the same amount.

This is shown by the calculation below

Q = mcΔT

ΔT = Q/mc where ΔT = temperature change, Q = amount of heat, m = mass of substance and c = specific heat capacity of substance.

Since Q, m and c are the same for both substances, thus ΔT will be the same.

So, the temperature of each sample will increase by the same amount

Heat and thermodynamics Numerical ​

Answers

Answer:

K = 227.04 W/m.°C

Explanation:

First we need to find the heat required to melt the ice:

q = m H

where,

q = heat required = ?

m = mass of the ice = 8.5 g = 8.5 x 10⁻³ kg

H = Latent heat of fusion of ice = 3.34 x 10⁵ J/kg

Therefore,

q = (8.5 x 10⁻³ kg)(3.34 x 10⁵ J/kg)

q = 2839 J

Now, we find the heat transfer rate through rod:

Q = q/t

where,

t = time = (10 min)(60 s/1 min) = 600 s

Q = Heat Transfer Rate = ?

Therefore,

Q = 2839 J/600 s

Q = 4.73 W

From Fourier's Law of Heat Conduction:

Q = KA ΔT/L

where,

K = Thermal Conductivity = ?

A = cross sectional area = 1.25 cm² = 1.25 x 10⁻⁴ m²

L = Length of rod = 60 cm = 0.6 m

ΔT = Difference in temperature = 100°C - 0°C = 100°C

Therefore,

4.73 W = K(1.25 X 10⁻⁴ m²)(100°C)/0.6 m

K = (4.73 W)/(0.0208 m.°C)

K = 227.04 W/m.°C

g A solenoid 63.5 cm long has 960 turns and a radius of 2.77 cm. If it carries a current of 2.28 A, find the magnetic field along the axis at its center.Find the magnetic field on the solenoidal axis at the end of the solenoid.

Answers

Answer:

The  value is  [tex]B = 0.0043 \ T[/tex]

Explanation:

From the question we are told that

   The  length of the solenoid is  [tex]l = 63.5 = 0.635 \ m[/tex]

    The number of turns is  [tex]N = 960 \ turns[/tex]

    The  current is  [tex]I = 2.28 \ A[/tex]

Generally the magnetic field is mathematically represented as

      [tex]B = \mu _o * n * I[/tex]

Where  n is the number of turn per unit length which is mathematically evaluated as

      [tex]n = \frac{N}{l}[/tex]

     [tex]n = \frac{960}{0.635}[/tex]

     [tex]n = 1512 \ turns /m[/tex]

and  [tex]\mu_o[/tex] is the permeability of free space with value  [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]

So  

    [tex]B = 4\pi * 10^{-7} * 1512 * 2.28[/tex]

    [tex]B = 0.0043 \ T[/tex]

     

A 2.0 m × 4.0 m flat carpet acquires a uniformly distributed charge of −10 μC after you and your friends walk across it several times. A 5.0 μg dust particle is suspended in midair just above the center of the carpet.

Required:
What is the charge on the dust particle?

Answers

Answer:

The  charge on the dust particle is  [tex]q_d = 6.94 *10^{-13} \ C[/tex]

Explanation:

From the question we are told that

    The length is  [tex]l = 2.0 \ m[/tex]

    The width is  [tex]w = 4.0 \ m[/tex]

   The charge is  [tex]q = -10\mu C= -10*10^{-6} \ C[/tex]

    The mass suspended in mid-air is [tex]m_a = 5.0 \mu g = 5.0 *10^{-6} \ g = 5.0 *10^{-9} \ kg[/tex]

   

Generally the electric field on the carpet is mathematically represented as

           [tex]E = \frac{q}{ 2 * A * \epsilon _o}[/tex]

Where [tex]\epsilon _o[/tex] is the permittivity of free space with value [tex]\epsilon_o = 8.85*10^{-12} \ \ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]

substituting values

           [tex]E = \frac{-10*10^{-6}}{ 2 * (2 * 4 ) * 8.85*10^{-12}}[/tex]

           [tex]E = -70621.5 \ N/C[/tex]

Generally the electric force keeping the dust particle on the air  equal to the force of gravity acting on the particles

        [tex]F__{E}} = F__{G}}[/tex]

=>     [tex]q_d * E = m * g[/tex]

=>      [tex]q_d = \frac{m * g}{E}[/tex]

=>      [tex]q_d = \frac{5.0 *10^{-9} * 9.8}{70621.5}[/tex]

=>     [tex]q_d = 6.94 *10^{-13} \ C[/tex]

It takes 85N of force to accelerate a ball at a rate of 15 m/s². What is the mass of the ball?

Answers

Explanation:

F = ma

85 N = m (15 m/s²)

m ≈ 5.7 kg

A 25 cm diameter circular saw blade spins at 3500 rpm. How fast would you have to push a straight hand saw to have the teeth move through the wood at the same rate as the circular saw teeth

Answers

Answer:

The answer is "45.79 m/s"

Explanation:

Given values:

diameter= 25 cm

w= 3500 rpm

Formula:

[tex]\boxed{v=w \times r} \ \ \ \ \ \ _{where} \ \ \ w = \frac{rad}{s} \ \ \ and \ \ \ r = meters[/tex]

Calculating r:

[tex]r= \frac{diameter}{2}[/tex]

  [tex]=\frac{25}{2}\\\\=12.5 \ cm[/tex]

converting value into meters: [tex]12.5 \times 10^{-2} \ \ meter[/tex]

calculating w:

[tex]w= diameter \times \frac{2\pi}{60}\\[/tex]

   [tex]= 3500 \times \frac{2\times 3.14}{60}\\\\= 3500 \times \frac{2\times 314}{6000}\\\\= 35 \times \frac{314}{30}\\\\= 35 \times \frac{314}{30}\\\\=\frac{10990}{30}\\\\=\frac{1099}{3}\\\\=366.33[/tex]

w= 366.33 [tex]\ \ \frac{rad}{s}[/tex]

Calculating v:

[tex]v= w\times r\\[/tex]

  [tex]= 366.33 \times 12.5 \times 10^{-2}\\\\= 366.33 \times 12.5 \times 10^{-2}\\\\= 4579.125 \times 10^{-2}\\\\\boxed{=45.79 \ \ \frac{m}{s}}[/tex]

The charger for your electronic devices is a transformer. Suppose a 60 Hz outlet voltage of 120 V needs to be reduced to a device voltage of 3.0 V. The side of the transformer attached to the electronic device has 45 turns of wire.
How many turns are on the side that plugs into the outlet?

Answers

Answer:

N₁ = 1800 turns

So, the side of the transformer that plugs into the outlet has 1800 turns.

Explanation:

The transformer turns ratio is given by the following equation:

V₁/V₂ = N₁/N₂

where,

V₁ = Voltage of outlet = 120 V

V₂ = Device Voltage = 3 V

N₁ = No. of turns on outlet side = ?

N₂ = No. of turns on side of device = 45

Therefore,

120 V/3 V = N₁/45

N₁ = (40)(45)

N₁ = 1800 turns

So, the side of the transformer that plugs into the outlet has 1800 turns.

What is the displacement of the object after 3 seconds?

Answers

Answer:

3 meters

Explanation:

A projectile is shot from the edge of a cliff 80 m above ground level with an initial speed of 60 m/sec at an angle of 30° with the horizontal. Determine the time taken by the projectile to hit the ground below.

Answers

Answer:

8 seconds

Explanation:

Answer:

Explanation:

Going up

Time taken to reach maximum height= usin∅/g

=3 secs

Maximum height= H+[(usin∅)²/2g]

=80+[(60sin30)²/20]

=125 meters

Coming Down

Maximum height= ½gt²

125= ½(10)(t²)

t=5 secs

Two sources of light of wavelength 700 nm are 9 m away from a pinhole of diameter 1.2 mm. How far apart must the sources be for their diffraction patterns to be resolved by Rayleigh's criterion

Answers

Answer:

The distance is  [tex]D = 0.000712 \ m[/tex]

Explanation:

From the question we are told that

    The wavelength of  the  light source is  [tex]\lambda = 700 \ nm = 700 *10^{-9} \ m[/tex]

     The distance from a pin hole is  [tex]x = 9\ m[/tex]

       The  diameter of the pin  hole is  [tex]d = 1.2 \ mm = 0.0012 \ m[/tex]

     

Generally the distance which the light source need to be in order for their diffraction patterns to be resolved by Rayleigh's criterion is

mathematically represented as

              [tex]D = \frac{1.22 \lambda }{d }[/tex]

substituting values

             [tex]D = \frac{1.22 * 700 *10^{-9} }{ 0.0012 }[/tex]

             [tex]D = 0.000712 \ m[/tex]

A brass rod is 185 cm long and 1.60 cm in diameter. What force must be applied to each end of the rod to prevent it from contract- ing when it is cooled from 120.0°C to 10.0°C?

Answers

Answer:

42000N

Explanation:

First you calculate how much it would contract, and secondly you then calculate the force to stretch it by that amount.

1) linear thermal expansion coef brass 19e-6 /K

∆L = αL∆T = (19e-6)(1.85)(110) = 0.00387 meter or 3.87 mm

Second part involves linear elasticity.

for brass, young's modulus is 15e6 psi or 100 GPa

cross-sectional area of rod is π(0.008)² = 0.0002 m²

F = EA∆L/L

F = (100e9)(0.0002)(0.00387) / (1.85)

F = 42000 or 42 kN

What is 3/4 of 12 and 24

Answers

Answer:

3/4 of 12 = 16

3/4 of 24 = 32

Those are the answers based on how your question sounded

Explanation:

Answer:

27

Explanation:

3/4 of (12 and 24)

of means ×

and means +

therefore,3/4× (12+24)

3/4×(36)

3×9

27

Other Questions
SkyChefs, Inc., prepares in-flight meals for a number of major airlines. One of the companys products is grilled salmon in dill sauce with baby new potatoes and spring vegetables. During the most recent week, the company prepared 5,100 of these meals using 2,000 direct labor-hours. The company paid its direct labor workers a total of $28,000 for this work, or $14.00 per hour. According to the standard cost card for this meal, it should require 0.40 direct labor-hours at a cost of $13.50 per hour. Required: 1. What is the standard labor-hours allowed (SH) to prepare 5,100 meals? 2. What is the standard labor cost allowed (SH SR) to prepare 5,100 meals? 3. What is the labor spending variance? 4. What is the labor rate variance and the labor efficiency variance? (For requirements 3 and 4, indicate the effect of each variance by selecting "F" for favorable, "U" for unfavorable, and "None" for no effect (i.e., zero variance). Input all amounts as positive values. Do no round intermediate calculations.) What is the asymptote of the function g(x) = 52^ 3x + 4 shown on the graph? Pls explain colour and its classification Why would the basic nature of humans be a topic of discussion for these philosophers?(Thomas Hobbes,John Locke,Charles-Louis Montesquieu, and Jean-Jacques Rousseau)PLEASE HELP!! Help plz, thx urgent Please Help quick!!! What is the value of a missing angle? What type of edge does UML use to denote interface implementation? Group of answer choices A dotted arrow from the interface to the class terminated with a triangular tip. A dotted arrow from the interface to the class terminated with an open arrow tip. A dotted arrow from the class to the interface terminated with an open arrow tip. A dotted arrow from the class to the interface terminated with a triangular tip. Cardiac Science is a California-based company that makes defibrillators,heart monitors,and other medical equipment.It is preparing to market its products in Greece.The company's marketing manager is responsible for the promotional campaign in Greece,and she wants to avoid any problems that might arise because her field of experience does not coincide with that of her Greek target audience.Which of the following is the best example of a communications problem that might arise because her field of experience is different from that of her audience?A) The name of the product,when translated into Greek,has an unintentional meaning.B) Her target audience is strongly ethnocentric.C) The trade journals in which the company wants to run its ads do not accept ads from foreign companies.D) A Greek bureaucrat who is responsible for determining that the Cardiac Science products meet national standards has taken a personal dislike to her.E) The ads are in trade journals that Greek hospital administrators don't read. A grocery store recently sold a bag of peanuts for $0.76 and a bag of Pikachu's for $3.68 at the end of the day 50 bags of peanuts and Pikachu's were sold for a total of 128 point 52 how many bags of each were sold Polychromasia Company sold inventory costing $30,000 to its subsidiary, Simply Colorful, for double its cost in 2009. Polychromasia owns 80% of Simply Colorful. Simply resold $50,000 of this inventory for $60,000 to outsiders in 2009. How much unrealized profit exists at the end of the year? a) $20,000 b) $8,000 c) $10,000 d) $5,000 Home Day is a large supermarket. It recently launched its own brand of cereals called Fast Bites, equivalent to most national brands and also priced slightly lower. Therefore, Fast Bites is an example of a(n) What is necessary for a ball to be in translational equilibrium? Which matrix represents the system of equations shown below?3x-2y = 46x- y = 10 does it matter in what order we divide our our prime factors explain 1. Approximate the given quantity using a Taylor polynomial with n3. 2. Compute the absolute error in the approximation assuming the exact value is given by a calculator. Fourth underroot(94)a. p3(94)b. absolute error Determine the most precise name for KIET (parallelogram,rhombus,rectangle or square.) you must use slope or length. K(0,0) I(2,2) T(5,-5) E(7,-3) A student is using a coffee-cup calorimeter to determine the enthalpy change of the endothermic reaction of two aqueous solutions. After both solutions are added to the cup, the student neglects to put the lid on the cup. This would cause the magnitude of the calculated H value to be: the answer is: too small, since the solution will absorb heat from the room. But why? Wouldn't depend on if the reaction releases or absorbs heat. Wouldn't it be too large because heat escapes the cup? I'm so confused INDEPENDENT, DEPENDENT, OR CONTROL?You water three sunflower plants with salt water. Each plant receives adifferent concentration of salt solution. A fourth plant receives pure water.After a two-week period, the height is measured.1. Is the height the independent variable or dependent variable?2. What is the control group in this experiment? What did Thomsons and Rutherfords experiments have in common? They both used charged particles in their experiments. They both used emission spectra to discover electron clouds. They both compared the atom to an indivisible sphere. They both discovered electron clouds. The minute hand of a watch has a length of 1.4 cm. Find the; (a) distance moved by the tip of the minute hand from 8.13 am to 8.49 am. (b) angle swept by the minute hand if the tip moves 8.8 mm (c)time it will bee when the minute hand sweeps the angle calculated in (b), if the minute hand started moving at 8.39 am