describe four energy changes that happen in the process.

Answer:

false?

Explanation:

The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus.

Answer:

I think the answer is False.

Answer:

Explanation:

so opposite and equal , right?    forces are. soooo..

528+52= 580 N    is the force that is being exerted up on the scale

Over the first 16.4 m, the person performs

W = (60.0 N) (16.4 m) = 984 J

of work.

Over the remaining 6.88 m, they perform a varying amount of work according to

F(x) ≈ 60.0 N + (-8.72 N/m) x

where x is in meters. (-8.72 is the slope of the line segment connecting the points (0, 60.0) and (6.88, 0).) The work done over this interval can be obtained by integrating F(x) over the interval [0, 6.88 m] :

W = ∫₀⁶˙⁸⁸ F(x) dx ≈ 206.4 J

(Alternatively, you can plot F(x) and see that it's a triangle with base 6.88 m and height 60.0 N, so the work done is the same, 1/2 (6.88 m) (60.0 N) = 206.4 J.)

So the total work performed by the person on the box is

984 J + 206.4 J = 1190.4 J ≈ 1190 J

Answer:

una ess abola cola sola answer

Answer:

a)   W = - 1.752 10⁻¹⁸ J,  b)    U = + 1.752 10⁻¹⁸ J

Explanation:

a) work is defined by

         W = F . x

the bold letters indicate vectors, in this case the force is electric

         F = q E

we substitute

         F = q E x

the charge of the electron is

         q = - e

         F = - e E x

let's calculate

         W = - 1.6 10⁻¹⁹  365  3 10⁻²

         W = - 1.752 10⁻¹⁸ J

b) the change in potential energy is

          U = q ΔV

the potential difference is

          ΔV = - E. Δs

we substitute

         U = - q E Δs

the charge of the electron is

           q = - e

          U = e E Δs

we calculate

           U = 1.6 10⁻¹⁹ 365  3 10⁻²

           U = + 1.752 10⁻¹⁸ J

Answer:

34.64 cm

Explanation:

Given that:

The depth of the hole h = 10 cm

height of the water holding in the tank H = 40 cm

For a stream of flowing water, the distance (x) at which the stream strikes the floor can be  computed by using the formula;

[tex]x = 2 \sqrt{h(H-h)}[/tex]

[tex]x = 2 \sqrt{10(40-10)}[/tex]

[tex]x = 2 \sqrt{10(30)}[/tex]

[tex]x = 2 \sqrt{300}[/tex]

[tex]x = 2 \times 17.32[/tex]

x = 34.64 cm

Answer:

1) Law of Universal Gravitation     Gravity is an attractive force

5) General relativity               Gravity is due to the curvature of spacetime

Explanation:

In this exercise you are asked to relate the correct theory and its explanation

Theory Explanation

1) Law of Universal Gravitation              Gravity is an attractive force

2) Law of universal gravitation              Mass and distance affect force

3) Classical mechanics                           time and space are absolute

4) Special relativity                                 Time and space are relative

5) General relativity                                Gravity is due to the curvature of

                                                               spacetime

6) General relativity                                 Mass affects the curvature of space - time

Answer:

Explanation:

edge2022

Answer:

[tex]p.d' = 37.6 V[/tex]

Explanation:

From the question we are told that:

Potential difference [tex]p.d=18.8V[/tex]

New Capacitor [tex]C_1=C_2/2[/tex]

Generally the equation for Capacitor capacitance is mathematically given by

[tex]C=\frac{eA}{d}[/tex]

Generally the equation for New p.d' is mathematically given by

 [tex]C_2V=C_1*p.d'[/tex]

  [tex]p.d' = 2V[/tex]

 [tex]p.d'= 2 * 18.8[/tex]

 [tex]p.d' = 37.6 V[/tex]

Answer:

1.621 kN

Explanation:

Since each horse pulls with a force of 839 N at an angle of 15° with the centerline of the canal, the horizontal component of the force due to the first horse along the canal is F= 839cos15° N and its vertical component is F' = 839sin15° N(it is positive since it is perpendicular to the centerline of the canal and points upwards).

The horizontal component of the force due to the second horse along the canal is f = 839cos15° N and its vertical component is f' = -839sin15° N (it is negative since it is perpendicular to the centerline of the canal and points downwards).

So, the resultant horizontal component of force R = F + f = 839cos15° N + 839cos15° N = 2(839cos15°) N = 2(839 × 0.9659) = 2 × 810.412 = 1620.82 N

So, the resultant vertical component of force R' = F' + f' = 839sin15° N + (-839sin15° N) = 839sin15° N - 839sin15° N = 0 N

The magnitude of the resultant force which is the sum of the two forces is R" = √(R² + R'²)

= √(R² + 0²)  (since R' = 0)

= √R²

= R  

= 1620.82 N

= 1.62082 kN

≅ 1.621 kN

So, the sum of these  two forces on the barge is 1.621 kN

Answer:

Option (c).

Explanation:

Let the mass of each cart is m and the force is F.

Time for cart A is 2t and for cart B is t.

Work done is given by the

W= force x displacement

As the distance is given by

S= u t +0.5 at^2

So, when the time is doubled the distance is four times.

So, WA = F x 4 S

WB = F x S

WA= 4 WB

Answer:

Momentum of object A = Momentum of object C < momentum of B.

Explanation:

The momentum of an object is equal to the product of mass and velocity.

Object A has a mass m and a speed v. Its momentum is :

p = mv

Object B has a mass m/2 and a speed 4v. Its momentum is :

p = (m/2)×4v = 2mv

Object C has a mass 3m and a speed v/3. Its momentum is :

p = (3m)×(v/3) = mv

So,

Momentum of object A = Momentum of object C < momentum of B.

Answer:

speaker64

--------

34x

Explanation:

64-34

x

speaker

4

2

4

788

- circuit

voltage

100000

x.34

Sorry but you have no picture shown

Answer:

Quantum theory gives the concept of

Answer:

[tex]t=0.50cm[/tex]

Explanation:

From the question we are told that:

Wavelength [tex]\lamda=3c[/tex]m

Refraction Index [tex]n=1.50[/tex]

Generally the equation for Destructive interference for Normal incidence is mathematically given by

[tex]2nt=m(\frac{1}{2})\lambda[/tex]

Since  Minimum Thickness occurs at

At [tex]m=0[/tex]

Therefore

[tex]t=\frac{\lambda}{2}[/tex]

[tex]t=\frac{3}{4(1.50)}[/tex]

[tex]t=0.50cm[/tex]

The period and the amplitude of the weight suspended from spring are 0.33 seconds and 10 centimeters, respectively.

1) The period is given by:

[tex] T = \frac{1}{f} [/tex]

Where:

f: is the frequency = 3 bob up and down each second = 3 s⁻¹ = 3 Hz

[tex] T = \frac{1}{f} = \frac{1}{3 Hz} = 0.33 s [/tex]

Hence, the period is 0.33 s.

2) The amplitude is the distance between the equilibrium position and the maximum position traveled by the spring. Since the spring is moving up and down over a distance of 20 cm, then the amplitude is:          

[tex] A = \frac{20 cm}{2} = 10 cm [/tex]  

Therefore, the amplitude is 10 cm.          

You can learn more about the period and amplitude here: https://brainly.com/question/15169209?referrer=searchResults

I hope it helps you!                    

Explanation:

Given:

[tex]A_1[/tex] = 4.5 cm[tex]^2[/tex]

[tex]v_1[/tex] = 40 cm/s

[tex]v_2[/tex] = 90 cm/s

[tex]A_2[/tex] = ?

a) The continuity equation is given by

[tex]A_1v_1 = A_2v_2[/tex]

Solving for [tex]A_2[/tex],

[tex]A_2 = \dfrac{v_1}{v_2}A1 = \left(\dfrac{40\:\text{cm/s}}{90\:\text{cm/s}}\right)(4.5\:\text{cm}^2)[/tex]

[tex]= 2\:\text{cm}^2[/tex]

b) If the cross-sectional area is reduced by 50%, its new area [tex]A_2'[/tex] now is only 1 cm^2, which gives us a radius of

[tex]r = \sqrt{\dfrac{A_2'}{\pi}} = 0.564\:\text{cm}[/tex]

Answer:

Explanation:

Changing the resistance of a resistor means the resistance is either increased or decreased.

a. When the resistance of the resistor is increased, the value of current flowing through the circuit decreases.

Example: given voltage of 6V, and a resistance of 30 Ohm's. The value of current flowing in the circuit is;

V = IR

6 = I x 30

I = 0.2 A

If the resistance is changed to 50 Ohm's, then:

I = 0.12 A

(ii) When the resistance of the resistor is decreased, the value of the current flowing through the circuit increases.

In the previous example, if the resistance is changed to 5 Ohm's, then:

V = IR

6 = I x 5

I = 1.2 A

(b) The voltage of the battery does not change since it is directly proportional to the current flowing through the circuit. Consider the examples stated above.

Answer:

The covalent bond is formed by pairs of electrons that are shared between two atom

Explanation:

The covalent bond is formed by pairs of electrons that are shared between two atoms, in general the electrons must have opposite spins to have a lower energy state.

In this bond, the electrons are between the two atoms and are shared between them in such a way that there is a configuration of eight electrons in the orbit.

Answer:

So the correct answer is letter e)

Explanation:

The electric field of an infinite yz-plane with a uniform surface charge density  (σ) is given by:

[tex]E=\frac{\sigma }{2\epsilon_{0}}[/tex]

Where ε₀ is the electric permitivity.

As we see, this electric field does not depend on distance, so the correct answer is letter e)

I hope it helps you!

Answer:

0.28 J

Explanation:

Let the mass of the object is 0.5 kg

The maximum velocity of the object is 1.06 m/s.

We need to find the kinetic energy at that time. It is given by :

[tex]K=\dfrac{1}{2}mv^2\\\\=\dfrac{1}{2}\times 0.5\times (1.06)^2\\\\K=0.28\ J[/tex]

So, the required kinetic energy is equal to 0.28 J.

Solution-1:-

[tex]\boxed{\sf \dfrac{10\times 1000}{60\times 60}}[/tex]

Solution:-2

[tex]\boxed{\sf Sodium\:and\:Potassium}[/tex]

Solution:-3

[tex]\boxed{\sf 320m}[/tex]

Solution:-4

[tex]\boxed{\sf Rough\:tiles\:are\:used\:in\:bathroom}[/tex]

Solution:-5

[tex]\boxed{\sf Mg_3N_2}[/tex]

Solution:-6

[tex]\boxed{\sf Grapes\:and\:Rambutan}[/tex]

Solution:-7

[tex]\boxed{\sf {}^{}_{}N}[/tex]

Solution:-8

[tex]\boxed{\sf Galactuse}[/tex]

Solution:-9

[tex]\boxed{\sf Y-X}[/tex]

Solution:-10

[tex]\boxed{\sf Cell\:wall}[/tex]

Answer:

a)  I = 3.75 10⁴  kg  m², b)  w = 0.6 rad / s, c)  K = 6.75 10³ J, d) P = 6.75 10² W

Explanation:

This is a rotations exercise

a) the proper shape for a wheel is that of a rim where most of the weight is in the circumference plus the point weights of the people sitting on its periphery.

We are going to approximate the reda with a thin ring

           I = M r²

           I = 1500 5²

           I = 3.75 10⁴  kg  m²

b) angular and linear velocity are related

         v = w r

         w = v / r

         w = 3/5

         w = 0.6 rad / s

c) the expression for kinetic energy is

         K = ½ I w²

         K = ½ 3.75 10⁴   0.6²

         K = 6.75 10³ J

d) the power is

         P = W / t

to find the work we use the relationship between work and the variation of kinetic energy

         W = ΔK = K_f - K₀

the system part of rest wo = 0

         W = K_f

         W = 6.75 10³ J

we calculate

         P = 6.75 10³/10

         P = 6.75 10² W

The vertical acceleration of the projectile is at 0 m/s while the horizontal acceleration of the projectile at the peak of the trajectory = initial acceleration  ( i.e. statement in the question is False )

Projectile motion follows a parabolic path with x and y components of its velocity and acceleration. also the acceleration of a projectile is subject only to the acceleration due to gravity unlike other kinds of motions.

In a parabolic motion an object ( projectile ) is thrown into the air and left to move through a parabolic path under the effect of acceleration due to gravity.

Hence we can conclude that the statement is false, because horizontal acceleration of the projectile at the peak of the trajectory = initial acceleration

Learn more : https://brainly.com/question/24658194

Answer:

The correct answer is "[tex]21.344^{\circ}[/tex]" and "[tex]39.56^{\circ}[/tex]".

Explanation:

According to the question,

Slit width,

[tex]d=\frac{1}{910 \ lines/mm}[/tex]

  [tex]=\frac{1}{910\times 10^3}[/tex]

  [tex]=1.099\times 10^{-6} \ m[/tex]

The condition far first order maxima will be:

⇒ [tex]d Sin \theta = 1 \lambda[/tex]

Now,

⇒ [tex]\Theta_{min} = Sin^{-1} (\frac{\lambda}{d} )[/tex]

             [tex]=Sin^{-1} (\frac{400\times 10^{-9}}{1.099\times 10^{-6}} )[/tex]

             [tex]=21.344^{\circ}[/tex]

⇒ [tex]\Theta_{max} = Sin^{-1} (\frac{\lambda}{d} )[/tex]

             [tex]=Sin^{-1} (\frac{700\times 10^{-9}}{1.099\times 10^{-6}} )[/tex]

             [tex]=39.56^{\circ}[/tex]

Answer:

The answer is continuity ( D )

Explanation:

PLZ MARK AS BRAINLIEST

[tex]\implies F_1 < F_2[/tex]

[tex] \implies F_{net} = F_2 - F1[/tex]

[tex]\implies F_{net} = 42 -15[/tex]

[tex]\implies \underline{ \boxed{ F_{net} = 27 \: N}}[/tex]

The net force on the 4.0 kg box is 27 N towards EAST.

Answer:

η = 0.5 = 50%

Explanation:

The efficiency of the power cycle is given by the following formula:

[tex]\eta = \frac{W}{Q_1}\\\\\eta = \frac{Q_1-Q_2}{Q_1}[/tex]

where,

where,

η = efficiency = ?

Q₁ = heat received from hot reservoir = 1000 KJ

Q₂ = heat discharged to cold reservoir = 500 KJ

Therefore,

[tex]\eta = \frac{1000\ KJ-500\ KJ}{1000\ KJ}[/tex]

η = 0.5 = 50%

Answer:

Well if you want to be sure you should just throw it to the ground so then when he lands he can catch it.

If the cannon throws the banana with the same force the monkey falls

(m.g=Fz <=> m.9,81N/kg=...N).

Then the throw will slow down because of the gravitational pull.

Because the banana cannon is selfmade you can choose what mass the bananas in question have, so let that be the same as the monkeys.

The monkey falls with the speed of 9,81m.s => so it takes the monkey 7,1s to land.

If the cannon can shoot the banana at the same speed the monkey falls then they would cross in the middle.

So to do so you need to throw the bananas with a speed of at least 9,81m.s

Soo ... throw them with a force of that is greater then the gravitational pull and things will work out.

I'm sorry I don't know why I wrote all of this irrelevant information it's 2:21 right now and I'm tired.

kind regards

Answer:

(a) 31.44 m/s (b) 164.74 m/s²

Explanation:

Given that,

The diameter of a disk, d = 12 cm

Radius, r = 6 cm

Angular speed = 5.24 rad/s

(a) Linear speed,

[tex]v=r\omega\\\\v=6\times 5.24\\\\v=31.44\ m/s[/tex]

(b) Centripetal acceleration,

[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{31.44^2}{6}\\\\a=164.74\ m/s^2[/tex]

Answer:

The distance between sun & Earth at position A is less than the earth at position B. The gravitational force of two bodies is inversely proportional to the square of the distance. So At position A gravitational force is more & it decreases as it rotate towards position B.