Answer:
[tex]B) \ \frac{1}{60} \ second[/tex]
Explanation:
Given;
frequency, F = 60 Hz
number of cycles, n = 1
Frequency is defined as the number of complete cycles per seconds.
Mathematically, it is expressed as follows;
[tex]F = \frac{n}{t} \\\\where;\\t \ is \ the \ time \ taken \ to \ make \ the \ complete \ cycle \ (seconds)\\\\t = \frac{n}{F} \\\\t = \frac{1}{60} \ second\\\\The \ correct \ answer \ is \ \ (B) \ \frac{1}{60} \ second[/tex]
Therefore, the time taken to make a cycle of 60 Hz is ¹/₆₀ s
Medical profession is a very sensitive profession.Do U agree?Give 5 reason
Answer:
Medical profession is very sensitive and intellectual where human life is at risk. A successful effort of a doctor can save a life. Due to that, a doctor is known as 2nd God. When he attempts a major and long surgery, his endurance, hard work and mental ability spotlight his character.
Good afternoon. Kindly assist on the following please. Assignment due by 4:30pm Mike bookshop had the following structure. Share capital 500000 ordinary shares of $1 each. 300000 10% preference of $1 each. Reserves Share premium 200 000 General reserves 100 000 Retained earnings 400 000 8% debenture 100 000 During the year the following transaction took place. 01 January issue of 200 000 $1 ordinary shares at$1,20 and 100 000 preference shares at $2 each. 01 June a 1 for 4 right issue at a premium of $0,10c each per share. 01 December 1 for 5 bonus shares fully paid. All shares issued during the year qualified for bonus and the company wishes to leave the reserves in their flexible form. Required. Balance sheet extract.
Answer:
Mike Bookshop
Balance Sheet Extract as at December 31
Share capital:
1,050,000 ordinary shares of $1 each $1,050,000
400,000 10% preference of $1 each 400,000
Total share capital $1,450,000
Reserves:
Share premium 357,500
General reserves 100,000
Retained earnings 225,000
Total reserves $682,500
8% debenture $100,000
Explanation:
a) Data and Analysis:
Share capital:
500000 ordinary shares of $1 each.
300000 10% preference of $1 each.
Reserves:
Share premium 200 000
General reserves 100 000
Retained earnings 400 000
8% debenture 100 000
During the year the following transaction took place.
01 January Cash $240,000 Ordinary share capital $200 000 Share Premium $40,000
$1 ordinary shares at$1.20 and
01 January Cash $200,000 Preferred share capital $100 000 Share Premium $100,000
01 June Cash $192,500 Ordinary share capital $175,000 Share Premium $17,500
a 1 for 4 right issue at a premium of $0.10c each per share.
01 December Retained Earnings $175,000 Ordinary share capital $175,000
1 for 5 bonus shares fully paid.
Ordinary share capital:
Beginning balance $500,000
January 1 issue 200,000
June 1 rights issue 175,000
Dec. 1 bonus issue 175,000
Ending balance $1,050,000
Preferred share capital:
Beginning balance $300,000
January 1 issue 100,000
Ending balance $400,000
Share Premium:
Beginning balance $200,000
January 1 issues 140,000
June 1 rights issue 17,500
Ending balance $357,500
General reserves $100,000
Retained Earnings:
Beginning balance $400,000
Dec. 1 Bonus issue (175,000)
Ending balance $225,000
Activity A is worth $100, is complete, and actually cost $150. Activity B is worth $500, is 75% complete, and has actually cost $400 so far. Activity C is worth $500, is 25% complete, and has actually cost $200 so far. What is the estimated cost at completion for this project, assuming current variances are typical of future variances?
Answer:
$1,375
Explanation:
Budget at completion = Worth of activity A + Worth of activity B + Worth of activity C
Budget at completion = $100 + $500 + $500
Budget at completion = $1,100
Earned value = Worth of activity A*% completed + Worth of activity B*% completed + Worth of activity C*% completed
Earned value = $100*100% + $500*75% + $500*25%
Earned value = $100 + $375 + $125
Earned value = $600
Actual cost = Actual cost of Activity A + Actual cost of Activity B + Actual cost of Activity C
Actual cost = $150 + $400 + $200
Actual cost = $750
Cost performance Index = Earned value / Actual cost
Cost performance Index = $600 / $750
Cost performance Index = 0.80
Cost performance Index = 80%
Estimate at completion = Budget at completion / Cost performance Index
Estimate at completion = $1,100 / 0.80
Estimate at completion = $1,375
Chicotti Company has 6,000 units in beginning work in process, 30% complete as to conversion costs, 75,000 units transferred out to finished goods, and 2,000 units in ending work in process 20% complete as to conversion costs. The beginning and ending inventory is fully complete as to materials costs. How much are equivalent units for materials if the FIFO method is used
Answer:
71,000
Explanation:
Calculation to determine How much are equivalent units for materials if the FIFO method is used
Using this formula
Equivalent units for materials=(Units transferred out to Finished goods + Units in ending work in process – Units in beginning work in process)
Let plug in the formula
Equivalent units for materials=75,000 + 2,000 – 6,000
Equivalent units for materials= 71,000
Therefore the equivalent units for materials if the FIFO method is used will be 71,000
Sims Company, a manufacturer of tablet computers, began operations on January 1, 2019. Its cost and sales information for this year follows. Manufacturing costs Direct materials $ 40 per unit Direct labor $ 60 per unit Overhead costs Variable $ 30 per unit Fixed $ 7,000,000 (per year) Selling and administrative costs for the year Variable $ 770,000 Fixed $ 4,250,000 Production and sales for the year Units produced 100,000 units Units sold 70,000 units Sales price per unit $ 350 per unit 1. Prepare an income statement for the year using variable costing. 2. Prepare an income statement for the year using absorption costing.
Answer:
Sims Company
Income Statements Variable Costing Absorption Costing
Sales revenue $24,500,000 $24,500,000
Cost of goods sold:
Variable cost of manufacturing 9,100,000 9,100,000
Variable cost of selling and admin. 770,000 0
Fixed manufacturing cost 0 4,900,000
Total cost of goods sold $9,870,000 $14,000,000
Contribution margin $14,630,000 0
Gross profit 0 $10,500,000
Fixed /Period costs:
Fixed manufacturing cost $7,000,000 0
Selling and administrative expenses:
Variable $ 770,000
Fixed 4,250,000 4,250,000
Total period/fixed costs $11,250,000 $5,027,000
Net operating income $3,380,000 $5,473,000
Explanation:
a) Data and Calculations:
Manufacturing costs
Direct materials $ 40 per unit
Direct labor $ 60 per unit
Overhead costs
Variable $ 30 per unit
Total variable manufacturing cost per unit = $130
Fixed $ 7,000,000 (per year)
Selling and administrative costs for the year
Variable $ 770,000
Fixed $ 4,250,000
Production and sales for the year
Units produced 100,000 units
Units sold 70,000 units
Ending inventory = 30,000 units
Sales price per unit $ 350 per unit
Examples of cash equivalents include all of the following EXCEPT U.S. Treasury bills. notes issued by major corporations. money market funds. long-term notes receivable.
Answer:
long-term notes receivable.
Explanation:
Cash equivalents can be regarded as total cash value that is available on hand, this encompass items that has similarities with cash and must be regarded as current assets. cash or cash equivalents of a company can be seen at top line of the balance sheet.
Examples of cash equivalents are;
✓Treasury bills
✓notes issued by major corporations. ✓money market funds.
The country of Bolivia had a Gross Domestic Product of $79 billion in 2016 and a population of 11 million people, the GDP per capita would be ________.
Answer:
The GDP per capita of country of Bolivia would be $7,181.82.
Explanation:
GDP Per capita refers to a measure that calculates a country's economic output per person by dividing its GDP by its population.
Therefore, we have:
GDP per capita = GDP / Population = $79 billion / 11 million = $79,000,000,000 / $11,000,000 = $7,181.82
Therefore, the GDP per capita of country of Bolivia would be $7,181.82.
Selected accounts with a credit amount omitted are as follows: Work in Process Apr. 1 Balance 7,500 Apr. 30 Goods finished X 30 Direct materials 60,000 30 Direct labor 191,000 30 Factory overhead 57,300 Finished Goods Apr. 1 Balance 13,500 30 Goods finished 307,300 What was the balance of Work in Process as of April 30? a.$307,300 b.$13,500 c.$57,300 d.$8,500
Answer:
the balance in work in process in april 30 is $8,200
Explanation:
The computation of the balance in work in process in april 30 is as follows:
Balance of Work in Process as of April 30 is
= Apr 1 Balance + Direct material + direct labor + overhead - goods finished
= $7,500 + $60,000 + $191,000 + $57,000 - $307,300
= $8,200
Hence, the balance in work in process in april 30 is $8,200
This is the answer but the same is not provided in the given options
Question
In 2 hours, China can produce 6 bottles of milk. In 5 hours, it can produce 15 batches of pumpkins. What is the country's
opportunity cost of producing 1 bottle of milk (in terms of batches of pumpkins)?
your answer below:
Answer:
China's opportunity cost of producing 1 bottle of milk is equal to one batch of pumpkins.
Explanation:
Given that in 2 hours, China can produce 6 bottles of milk, and in 5 hours, it can produce 15 batches of pumpkins, to determine what is the country's opportunity cost of producing 1 bottle of milk (in terms of batches of pumpkins), the following calculation must be performed:
Milk = 6/2 = 3 per hour
Batches of pumpkins = 15/5 = 3 per hour
3/3 = 1
Therefore, China's opportunity cost of producing 1 bottle of milk is equal to 1 batch of pumpkins.
Now- a quick question. Assume at the beginning of Year2, Becker Company has a credit (positive) balance in the AOCI account of $10800. Becker Company reports $653000 of net income for Year2. Becker has an unrealized gain of $12000 during Year2. The gain qualifies as OCI (Other comprehensive income). 1. What will Becker report as Accumulated Other Comprehensive Income on the Year2 balance sheet
Answer:
Becker Company
The amount that Becker will report as Accumulated Other Comprehensive Income on the Year 2 balance sheet is:
= $22,800.
Explanation:
a) Data and Calculations:
Year 2 Beginning balance:
Accumulated other comprehensive income (AOCI) = $10,800 credit
Year 2 reported net income = $653,000
Unrealized gain during Year 2 = $12,000
The Accumulated Other Comprehensive Income on the Year 2 balance sheet is:
Beginning balance $10,800
Unrealized gain 12,000
AOCI for Year 2 = $22,800
b) Becker's Accumulated Other Comprehensive Income includes unrealized gains and losses arising from some investments, pension plans, and hedging transactions. These are usually reported in the equity section of the balance sheet and then netted off from the retained earnings.
g Find the monthly payment and estimate the remaining balance (to the nearest dollar). Assume interest is on the unpaid balance. 5-year car loan for $9700 at 5%; remaining balance after 4 years.
Answer:
Monthly payment $102.88
Outstanding balance after year 4 $1,201.76
Explanation:
First and foremost, the car loan amount of $9,700 is the present value of all monthly payments for 5 years as shown below:
PV=monthly payment*(1-(1+r)^-n/r
PV=car loan amount=$9,700
monthly payment=unknown
r=monthly interest rate=5%/12=0.004166667
n=number of monthly payments in 5 years=5*12=60
$9700=monthly payment*(1-(1+0.004166667)^-120/0.004166667
$9700=monthly payment*(1-(1.004166667)^-120/0.004166667
$9700=monthly payment*(1-0.607161016 )/0.004166667
$9700=monthly payment*0.392838984 /0.004166667
$9700=monthly payment*94.28134862
monthly payment=$9700/94.28134862
monthly payment=$102.88
The outstanding balance after year 4 is the present value of monthly payments for the remaining 1 year(12 months)
PV=$102.88*(1-(1+0.004166667)^-12/0.004166667
PV=$102.88*(1-(1.004166667)^-12/0.004166667
PV=$102.88*(1-0.951328238 )/0.004166667
PV=$102.88*0.048671762 /0.004166667
PV=$1,201.76
Select the market segment that looks the most promising?
1. Luxury trenfollowers
Segment size 5,000(5%)
Growth rate 7%
2. School children
Segment size 35,000 (35%)
Growth rate 1%
3. University students
Segment size 24,099(24%)
Growth rate 5%
4. Outdoor enthusiasts
Segment size 14,000 (14%)
Growth rate 5%
5. Urban commuters
Segment size 20,000 (20%)
Growth rate 3%
Answer:
Luxury Trend followers
Explanation:
The consider which market segment shows the most or higest level of promise, we may have to the growth rate of each segment, which is the percentage change in earnings or revenue over a specific period of time. From the data given, the market segment with the greatest growth rate is the trend followers segment with a growth rate of 7%
Luxury trend followers : 7%
School children : 1%
University students : 5%
Outdoor enthusiasts : 5%
Urban Commuters : 3%
Firm A has a 21 percent marginal tax rate, and Firm Z has a 28 percent marginal tax rate. Firm A owns a controlling interest in Firm Z. The owners of Firm A decide to incur a $9,500 deductible expense that will benefit both firms.
Required:
Compute the after-tax cost of the expense assuming that:
a. Firm A incurs the expense
b. Firm Z incurs the expense
Answer:
a. $7,505
b.$6,840
Explanation:
a. Computation for the after-tax cost of the expense assuming that Firm A incurs the expense
Using this formula
After-tax cost = Deductible Expense - (Firm A Marginal tax rate* Deductible Expense)
Let plug in the formula
After-tax cost = ($9,500 - ($21%*9500)
After-tax cost = ($9,500 - $1,995)
After-tax cost=$7,505
Therefore the after-tax cost of the expense assuming that Firm A incurs the expense is $7,505
B. Computation for the after-tax cost of the expense assuming that Firm Z incurs the expense
Using this formula
After-tax cost = Deductible Expense - (Firm Z Marginal tax rate*Deductible Expense)
Let plug in the formula
After-tax cost =$9,500 -(28%*$9500)
After-tax cost =($9,500 - $2,660 )
After-tax cost=$6,840
Therefore the after-tax cost of the expense assuming that Firm Z incurs the expense is $6,840
Concord Company has recently tried to improve its analysis for its manufacturing process. Units started into production equaled 18900 and ending work in process equaled 1000 units. Concord had no beginning work in process inventory. Conversion costs are applied uniformly throughout production, and all materials are applied at the beginning of the process. How much is the materials cost per unit if ending work in process was 30% complete and total materials costs equaled $86940
Answer:
the material cost per unit is $4.60 per unit
Explanation:
The computation of the material cost per unit is shown below:
= Total material cost ÷ equivalent units of material
= $86,940 ÷ (18,900 - 1,000) × 100% + 1,000 × 100%
= $86,940 ÷ (17,900 + 1,000)
= $86,940 ÷ 18,900
= $4.60 per unit
Hence, the material cost per unit is $4.60 per unit
The same should be considered and relevant
Short-term investments are intended to be converted into cash within the longer of one year or the operating cycle of the business, and are readily convertible to cash. True or False
Answer:
True
Explanation:
The reasons why many companies invest in other companies includes
1. Due to excess cash not needed immediately, so invested to earn additional income to use for operations
2. Long- term strategic reasons etc
The criteria for a current asset is that the investment must be liquid and be able to convert to cash within one year (or become a long-term investment).
Short-term investments
This is a current assets. It is also called marketable securities. This is a form of an investments made in marketable securities that can be converted easily to cash which a company plans to hold for 1 year or less than one year.
The 3 categories of short-term investments. They includes:
1. Trading securities
2. available-for-sale securities
3. Held to maturity investment.
Use the following information: a. Beginning cash balance on March 1, $72,000. b. Cash receipts from sales, $300,000. c. Budgeted cash payments for direct materials, $140,000. d. Budgeted cash payments for direct labor, $80,000. e. Other budgeted cash expenses, $45,000. Cash repayment of bank loan, $20,000.Prepare a cash budget for the month ended on March 31 for Gado Company. The budget should show expected cash receipts and cash payments for the month of March and the balance expected on March 31.
Answer:
the budget of the pines is 8 to them b sqare the 4 in you get 12,500
Explanation:
Answer:
no clue
Explanation:
have a good day:)))
Wasilko Corporation produces and sells one product The budgeted selling price per unit is $114. Budgeted unit sales for February is 9,900 units. Each unit of finished goods requires 6 pounds of raw materials. The raw materials cost $4.00 per pound. The direct labor wage rate is $24.00 per hour. Each unit of finished goods requires 2.4 direct labor-hours. Manufacturing overhead is entirely variable and is $9.00 per direct labor-hour. The variable selling and administrative expense per unit sold is $1.60. The fixed selling and administrative expense per month is $70,000. The estimated net operating income (loss) for February is closest to:
Answer: $21,080
Explanation:
First calculate the contribution margin per unit
= Sales - Variable costs
= Selling price - Raw materials - Direct labor cost - Manufacturing overhead - Variable selling and administrative expense
= 114 - (6 * 4) - (2.4 * 24) - (9 * 2.4) - 1.60
= $9.20
The Contribution margin is:
= 9.20 * 9,900 units
= $91,080
Net operating income = Contribution margin - fixed cost
= 91,080 - 70,000
= $21,080
Which of the following is not an example of what creates a hostile work environment?
1. Displaying sexually suggestive pictures or posters
2. Making sexual comments to other employees
3. All of these
4.Dispensing Assignments based on merit.
Answer:
4.Dispensing Assignments based on merit.
Explanation:
Dispensing Assignments based on merit is not an example of what creates a hostile work environment.
There are examples of what could cause a hostile work environment which include sexual harassment, use of foul language, etc.
However, giving assignments based on merit is not one of those.
Suppose that France and Denmark both produce oil and olives. Frances’s opportunity cost of producing a crate of olives is 4 barrels of oil, while Denmark’s opportunity cost of producing a crate of olives is 7 barrels of oil.
By comparing the opportunity cost of producing olives in the two countries, you can tell that _______has a comparative advantage in the production of olives and ______has a comparative advantage in the production of oil.
Suppose that France and Denmark consider trading olives and oil with each other. France can gain from specialization and trade as long as it receives more than _____ of oil for each crate of olives it exports to Denmark. Similarly, Denmark can gain from trade as long as it receives more than _____ of olives for each barrel of oil it exports to France.
Based on your answer to the last question, which of the following terms of trade (that is, price of olives in terms of oil) would allow both Denmark and France to gain from trade?
A__ 6 barrels of oil per crate of olives
B__ 3 barrels of oil per crate of olives
C__ 5 barrels of oil per crate of olives
D__ 8 barrels of oil per crate of olives
Answer: See explanation
Explanation:
Based on the information given in the question, one can deduce that while (France) has a comparative advantage in the production of olives, it should be noted that on the other hand, (Denmark) has a comparative advantage in the production of oil.
If France and Denmark consider trading olives and oil with each other, then France can gain from specialization and trade as long as it receives more than (4) of oil for each crate of olives it exports to Denmark while on the other hand, Denmark can gain from trade as long as it gets more than (1/7) crate of olives for each barrel of oil it exports to France.
The terms of trade that would allow both Denmark and France to gain from trade include:
• 6 barrels of oil per crate of olives.
• 5 barrels of oil per crate of olives.
Halsted Corp. has identified three cost pools in its manufacturing process: equipment maintenance, setups, and quality control. Total cost assigned to the three pools is $214,500, $101,400, and $153,000, respectively. Cost driver estimates for the pools are 10,000 machine hours, 150 setups, and 450 quality inspections, respectively.
Required:
Calculate the activity rate for each of Halsted's cost pools.
Answer:
Maintenance $21.45 per Machine Hour
Setup $676 per Setup
Quality Control $340 per Inspection
Explanation:
Calculation to determine the activity rate for each of Halsted's cost pools.
Activity rate for MAINTENANCE COST
Using this formula
Activity rate= Total maintenance cost / Total machine hours
Let plug in the morning
Activity rate=$214,500/ 10,000
Activity rate= $21.45 per Machine Hour
Activity rate for SETUPS
Using this formula
Activity rate= Total Setups /Setups
Let plug in the formula
Activity rate= $101,400/150
Activity rate=$676 per Setup
Activity rate for QUALITY CONTROL
Using this formula
Activity rate= Total Quality control /Quality inspections
Let plug in the formula
Activity rate= $153,000/450
Activity rate= $340 per Inspection
Therefore the activity rate for each of Halsted's cost pools will be:
Maintenance $21.45 per Machine Hour
Setup $676 per Setup
Quality Control $340 per Inspection
On whom the trade bill drawn ?
The bill of exchange is drawn by the seller of the goods and is accepted by the buyer.
Is scented candle harmful to dogs?
Answer:
Scented candles are not harmful to dogs for normal use, but high concentrations in a confined space for a long time would have an impact on the dog's sense of smell.
Because the candles you use will cause a lot of burnt smoke which is harmful to dogs. And aromatherapy ingredients contain a lot of chemical substances. If the windows are opened, it will be ok, if not the more chemical substances accumulate, the more it will be harmful to dogs, or even to the health of people.
Here are several ways to avoid the harm caused by aromatherapy to dogs:
Do not ignite the two types of aromatherapy in a short time or at the same time, to avoid the two types of aromatherapy, which are mutually ineffective and produce toxic gas.
Try not to light candles in a closed bedroom when you sleep.
Keep air circulation.
Keep all kinds of aromatherapy out of reach of dogs.
Use Home Lights scented candles in the right way.
Explanation:
https://hlcandles.com/
XYZ produces a single product and has provided the following data for its most recent month of operations:
Number of units produced 6,400
Variable costs per unit:
Direct materials $72
Direct labor $80
Variable manufacturing overhead $10
Variable selling and administrative expense $12
Fixed costs:
Fixed manufacturing overhead $224,000
Fixed selling and administrative expense $288,000
There were no beginning or ending inventories. The absorption costing unit product cost was: ____________-
Answer: $197
Explanation:
With absorption costing, the fixed manufacturing costs are absorbed by the products which means that the product cost will include fixed costs related to manufacturing.
The absorption costing unit product cost is therefore:
= Direct materials + Direct Labor + Variable manufacturing overhead + Fixed manufacturing Overhead per unit
Fixed manufacturing overhead per unit is:
= 224,000 / 6,400 units
= $35 per unit
Absorption cost unit product cost = 72 + 80 + 10 + 35
= $197
On January 1, Parson Freight Company issues 7.0%, 10-year bonds with a par value of $4,500,000. The bonds pay interest semiannually. The market rate of interest is 8.0% and the bond selling price was $4,194,222. The bond issuance should be recorded as:
Answer: Debit Cash $4,194,222; Debit Discount on bonds payable $305,778; Credit Bonds payable $4,500,000
Explanation:
Based on the information given in the question, the journal entry will be prepared as follows:
Debit Cash $4,194,222
Debit Discount on bonds payable $305,778
Credit Bonds payable $4,500,000
Note that the discount on Bonds Payable was calculated as:
= $4,500,000 - $4,194,222
= $305,778
odson Company manufactures a product with a standard direct labor cost of 2.3 hours of labor per unit at $10.60 per hour. Last month, 170 units were produced using 90 hours at $11.60 per hour. What was the company's labor quantity variance
Answer:
Direct labor time (efficiency) variance= $3,190.6 favorable
Explanation:
To calculate the direct labor quantity variance, we need to use the following formula:
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Direct labor time (efficiency) variance= (391 - 90)*10.6
Direct labor time (efficiency) variance= $3,190.6 favorable
Standard quantity= 2.3*170= 391
When the price of paintings is set at $500, the local art gallery supplies 20 paintings per week. When the price of paintings increases to $750, the gallery supplies 25 paintings. Calculate the price elasticity of supply using the mid-point formula. Instructions: Round your answer to two decimal places. If you are entering a negative number be sure to include a negative sign (-) in front of that number. The price elasticity of supply is: .
Answer:
the price elasticity of supply is 0.555
Explanation:
The computation of the price elasticity of supply is given below:
= Percentage change in quantity supplied ÷ percentage change in price
= (25 - 20) ÷ (25 + 20) ÷ 2 ÷ (750 - 500) ÷ (750 + 500) ÷ 2
= 5 ÷45 ÷ 250 ÷ 125
= 0.555
Hence, the price elasticity of supply is 0.555
The same is relevant
If a company spends $80 million to build facility space sufficient to hold 5 million pairs of footwear-making equipment at a site in Latin America, then the company's annual depreciation costs for this facility space will be
Answer: $8,000,000
Explanation:
From the question given, the cost of the building facility is $80 million. Also, it should be noted that the default rate for depreciation is given as 10%, therefore, the company's annual depreciation costs for this facility space will be:
= Depreciation rate × Cost of building
= 10% × $80,000,000
= 0.1 × $80,000,000
= $8,000,000
A small business owner visits his bank to ask for a loan. The owner states that she can repay a loan at $1,500 per month for the next 3 years and then $500 per month for three years after that. If the bank is charging customers 10 percent APR, how much would it be willing to lend the business owner?
Answer:
The bank will be willing to lend $ 28,800 to the business owner.
Explanation:
Given that a small business owner visits his bank to ask for a loan, and the owner states that she can repay a loan at $ 1,500 per month for the next 3 years and then $ 500 per month for three years after that, since the bank is charging customers 10 percent APR, to determine how much the business owner would be willing to lend the following calculation must be performed:
1500 x 12 x 3 + 500 x 12 x 3 = X
18000 x 3 + 6000 x 3 = X
54000 + 18000 = X
72000 = X
10 x 6 = 60
100 - 60 = 40
100 = 72000
40 = X
40 x 72000/100 = X
28800 = X
Therefore, the bank will be willing to lend $ 28,800 to the business owner.
Your friend Lorenzo is trying to decide on a career path. He has narrowed down his search to two choices. Before he selects a major, he wants to know more about the two careers and the skills needed for each profession. What advice would you give Lorenzo
Answer:
Interview someone in each of your chosen fields.
Explanation:
In the context, my friend Lorenzo wants advice from me regarding career choices. He has somehow researched and narrowed down the choices to two choices. Lorenzo wants to know more about the major and the skills required for each of the profession.
I would suggest him to interview someone experience person in this field and get insights from him. It will provide Lorenzo a better understanding of the major selection and it will also create a blueprints of the future paths.
Which of the following is a major difference between a budget constraint and production possibilities frontier?
a. A production possibilities frontier conveys the relative prices of the two goods, whereas a budget constraint accounts for diminishing returns.
b. A production possibilities frontier is usually straight, whereas a budget constraint is typically curved.
c. A budget constraint typically has a constant slope, whereas the slope of a production possibilities frontier is usually different at various points.
d. There is no difference. They convey the same information.
Answer:
c
Explanation:
The Production possibilities frontiers is a curve that shows the various combination of two goods a company can produce when all its resources are fully utilised.
The PPF is concave to the origin. This means that as more quantities of a product is produced, the fewer resources it has available to produce another good. As a result, less of the other product would be produced. So, the opportunity cost of producing a good increase as more and more of that good is produced.
So, the PPF exhibits diminishing return. The slope of the PPF is different at different points. this makes the PPF a curve
the budget constraint is a straight line that shows the various combinations of goods a consumer can consume given her income. the budget constraint is a straight line because the slope is constant at each point on the curve
Also, the slope of the budget constraint is the relative prices of the two goods
