Answer:
a. Project's net present value is $1,015,163.09
b. Simple rate of return is 15%
c. Yes. The reason is that the project has a positive net present value of $1,015,163.09.
d. No. The reason is that the simple rate of return of 15% obtained in part b is lower the division’s return on investment (ROI), which has been above 20% each of the last three years.
Explanation:
a. Compute the project's net present value.
To compute this, we first calculate the annual cash inflow as follows:
Annual cash inflow = Net operating income + Depreciation = $452,000 + $828,000 = $1,,280,000
Now, the project's net present value can be calculated using the formula for calculating the present of an ordinary annuity as follows:
PV = P * [{1 - [1 / (1 + r)]^n} / r] …………………………………. (1)
Where;
PV = Present value of the annual cash flow = ?
P = Annual cash inflow = $1,280,000
r = Discount rate = 17%, or 0.17
n = Equipment useful years = 5
Substitute the values into equation (1) to have:
PV = $1,280,000 * [{1 - [1 / (1 + 0.17)]^5} / 0.17]
PV = $4,095,163.09
Project's net present value = PV - Project's initial investment = $4,095,163.09 - $3,080,000 = $1,015,163.09
b. Compute the project's simple rate of return
This can be computed as follows:
Simple rate of return = Net operating income / Initial investment = $452,000 / $3,080,000 = 0.15, or 15%
c. Would the company want Derrick to pursue this investment opportunity?
Yes. The reason is that the project has a positive net present value of $1,015,163.09.
Note that had it been the net present value of the project was negative, the company would not want to Derrick to pursue this investment opportunity since the decision of the company is based on whether the project's NPV is positive or negative.
d. Would Derrick be inclined to pursue this investment opportunity?
No. The reason is that the simple rate of return of 15% obtained in part b is lower the division’s return on investment (ROI), which has been above 20% each of the last three years.
Pursuing this investment opportunity will therefore reduce the Overall ROI of the division and Derrick will not get annual pay raises if this happens.
A manager is attempting to assess the probability of a recession ending in the next six months and its impact on expected profitability. The manager believes there is a 75 percent chance the recession will end in six months and profits will return to $400 million. However, there is a 25 percent chance the recession will not end in six months, resulting in a $5 million loss. The expected profits over the next six months are:
Answer:
Expected profit = $298.75 million
Explanation:
To calculate the expected return or expected profits, we will simply multiply the probability of each event by the return expected in that event and take a sum the answers. Thus, the expected profit can be calculated as follows,
Expected profit = Probability of recession ending * Profit if recession ends + Probability of recession not ending * profit or loss if recession does not end
Expected profit = 0.75 * 400 + 0.25 * -5
Expected profit = $298.75 million
Marston Manufacturing Company has two divisions, L and H. Division L is the company’s low-risk division and would have a weighted average cost of capital of 8% if it was operated as an independent company. Division H is the company’s high-risk division and would have a weighted average cost of capital of 14% if it was operated as an independent company. Because the two divisions are the same size, the company has a composite weighted average cost of capital of 11%. Division H is considering a project with an expected return of 12%. Should Marston Manufacturing Company accept or reject the project? Reject the project Accept the project On what grounds do you base your accept–reject decision? Division H’s project should be accepted, as its return is greater than the risk-based cost of capital for the division. Division H’s project should be rejected since its return is less than the risk-based cost of capital for the division.
Answer:
Should Marston Manufacturing Company accept or reject the project?
Marston C Company should reject the project because its expected return is lower than Division H's cost of capital.
Since the divisions' risk is so different, and probably their projects are also very different, the company should use different costs of capital to accept of reject the projects based on each division's cost of capital.
Imagine another situation where Division L is evaluating a project that yields 10%. If they used the company's WACC, then they should reject the project, but if they used the division's cost of capital, then they should accept the project (in this case I would recommend accepting it).
Explanation:
Division H's risk = 14%
Division L's risk = 8%
WACC = 11%
The term crowding-out effect refers to a situation in which a government _______________ results in ______________ interest rates, causing ______________ in private spending on investment and consumer durables.
Answer: Deficit; higher; a decrease
Explanation:
The term crowding-out effect refers to a situation in which a government deficit results in higher interest rates, causing a decrease in private spending on investment and consumer durables.
The Crowding-out effect is what happens when a Government increases its spending past its revenues and gets a budget deficit. In other to balance its books therefore it will borrow heavily.
If the Government is such a large one like the American Government or the British Government, the borrowing might be so large that it will have the effect of reducing the amount of loanable funds in the market thereby increasing the interest rates due to a reduced supply of loanable funds.
As there are now increased interest rates, it will be more expensive for companies to borrow to spend on investment or for consumers to spend on durables. It will have the effect of crowding out the private sector.
Though not specifically cited in the producer's contract, the producer is expected to telephone prospects on the insurer's behalf to arrange sales appointments. This is an example of what kind of producer authority?
Answer:
Implied authority
Explanation:
Implied authority defines an authority with respect to agent that involves jurisdiction to perform the acts so that the objectives of the organization could be achieved. Also, it is a binding contract on other person behalf or company
Therefore according to the given situation, this is an example of implied authority
The Treasury bill rate is 4% and the market risk premium is 7%.
Project Beta Internal rate of return %
P 1.0 14
Q 0 6
R 2.0 18
S 0.4 7
T 1.6 20
Required:
a. What are the project costs of capital for new ventures with betas of 0.75 and 1.75?
b. Which of the following capital investments have positive NPVs?
1. P
2. Q
3. R
4. S
5. T
Answer:
the answer is going to be 3. R
Carpenter Corporation uses the weighted-average method in its process costing system. This month, the beginning inventory in the first processing department consisted of 2,400 units. The costs and percentage completion of these units in beginning inventory were: 2 points Percent Complete 60% 55% Cost $ 7,000 $10,300 Materials costs Conversion costs 01:53:47 A total of 10,500 units were started and 8.900 units were transferred to the second processing department during the month. The following costs were incurred in the first processing department during the month: eBook Materials costs Conversion costs $ 96,800 $171,000 References The ending inventory was 85% complete with respect to materials and 70% complete with respect to conversion costs.
How many units are in ending work in process inventory in the first processing department at the end of the month?
a. 4,000
b. 1,800
c. 8.100
d. 1,600
Answer:
a. 4,000
Explanation:
Units in ending inventory
= Units in beginning work in process + Units started into production - Units transferred to the next department
= 2,400 + 10,500 - 8,900
= 4,000 units
You haven't been able to spend much time talking with your team lately, but your workload should be back to normal soon. When you checked in with your team today, several associates joked about being surprised to see you.
Assuming all option are possible, what would you be most and least likely to do?
Answer and Explanation:
I would most likely do this:
Explain the issue to the team and praise them for their work in my absence. I would let them know there would be more time soon. It is very essential to praise and appreciate these efforts by the associates since I have been absent for a while and do not know what efforts they have been putting in.
I would be least likely to:
Talk to the manager to explain this situation or propose that my some of my commitments are eased for me to have more time with my team
Radoski Corporation's bonds make an annual coupon interest payment of 7.35% every year. The bonds have a par value of $1,000, a current price of $1,470, and mature in 12 years. What is the yield to maturity on these bonds
Answer:
The answer is 2.71 percent
Explanation:
The interest payment is annually.
N(Number of periods) = 12 years
I/Y(Yield to maturity) = ?
PV(present value or market price) = $1,470
PMT( coupon payment) = $73.5 ( [7.35 percent x $1,000)
FV( Future value or par value) = $1,000.
We are using a Financial calculator for this.
N= 12; PV = -1470 ; PMT = 73.5; FV= $1,000; CPT I/Y= 2.71
Therefore, the Yield-to-maturity of the bond annually is 2.71 percent
The IMF policies that accompany most IMF loans are typically: Multiple Choice expansionary in the short run. procyclical in the long run. contractionary in the long run. contractionary in the short run.
Answer:
contractionary in the long run
Explanation:
contractionary fiscal policy reduces spending and raises taxes. it contract the economy by reducing the amount of money that is available for businesses and for people to spend. it could reduce government expenditure or increase taxes or in other times do both. useful during inflation
The Marketing Control Statement is a valuable statement for marketers because it only utilizes costs that the marketer can control. True False
Answer: True
Explanation:
The Marketing Control Statement is quite beneficial to marketers as it avoids fixed costs and shows them the variable and programmed costs both of which can be controlled. This enables them to know what they need to and can change in a way that they can come up with an optimal marketing mix to ensure profitability.
It is also a very uncomplicated statement to prepare which further ingratiates it to marketers who would like to avoid all the jargon of income statements.
The given statement is true.
The following information should be considered:
The Marketing Control Statement should be beneficial for marketers as in this the fixed cost are ignored and the variable & other cost should be controlled. Due to this, the profitability should increasedTherefore we can conclude that The given statement is true.
Learn more: brainly.com/question/17429689
The production department is proposing the purchase of an automatic insertion machine. They have identified 3 machines and have asked the accountant to analyze them to determine the best average rate of return.
Machine A Machine B Machine C
Estimated Average Income $45,192.56 $64,695.00 $60,929.70
Average Investment $322,804.00 $215,650.00 $406,198.00
Select the correct answer.
a) Machine B or C
b) Machine A
c) Machine C
d) Machine B
Answer:
Option D is correct
Machine B is the best investment
Explanation:
The accounting rate of return is the average annual income expressed as a percentage of the average investment.
The simple rate of return can be calculated using the two formula below:
Accounting rate of return =
Annual operating income/Average investment × 100
To determine the the machine with the best return,we would compute the average annual return of all of the machines and then choose the machine with the highest return
This is done as follows:
Machine Working s Average annul rate
A 45,192.56/322,804.00 × 100 = 14.0%
B 64,695.00/215,650.00 × 100= 30.0%
C 60,929.70/406,198.00× 100 = 15.0%
Machine B is the best investment
Describe various ways that knowledge management systems could help firms with sales and marketing or with manufacturing and production.
Answer:
Please see explanation below.
Explanation:
Knowledge management system is a system that allows sales people have quick and right information about a company's value proposition without having to wait for feedback from team members or someone else in the company. An advantage of knowledge management system is the ability to train many employees remotely or places where they may be needed.
Various ways ways that knowledge management system could help sales and marketing.
•Getting sales people on the same page. A company's sales team should understand the value propositions of their firm and how such values distinct them from the competitors. Each sales member should be acquitted with the knowledge management system which provides an easily accessible place for the company's value proposition. It also means that the values should readily be known and understood by everyone and are able to apply them according to how situations demands.
• Allowing to refine and deliver a better training process. This explain that knowledge management system can assist in terms of tracking questions frequently asked by sales people , contents mostly assessed by them and activities often carried out by top sales person that bring about the best result. All the information gathered including possible answers and training contents can then be loaded into the knowledge management system to help train new hires.
• Helping to track valuable insights and information. Prospects and customers usually give useful feed back which can assist a sales team and sales representative handles future sales opportunities. It is not enough capturing these information on the knowledge management system, they should be properly organized and accessible for other team members to benefit .
• Making it easier for sales and marketing to help each other. An important part of marketing team's task is to understand the challenges faced by the target audience and the questions prospects commonly ask so as to create relevant contents for them and also upload them on the knowledge management system portal. Such information should be often accessed by the team and then take better advantage of it.
Other areas knowledge management system could help sales and marketing are assistance with sales trend, high level decisions with regards to product orders, price negotiations . etc
The following information describes the production activities of Mercer Manufacturing for the year.
Actual direct materials used 28,000 lbs. at $4.90 per lb.
Actual direct labor used 8,650 hours for a total of $174,730
Actual units produced 51,600
The budgeted standards for each unit produced are 0.50 pounds of direct material at $6.85 per pound and 10 minutes of direct labor at $21.20 per hour.
1. Compute the direct materials price and quantity variances. Do not round intermediate calculations.
2. Compute the direct labor rate and efficiency variances. Indicate whether each variance is favorable or unfavorable. Do not round intermediate calculations.
Answer:
Actual Quantity = 28,000
Actual Price = 4.90
Standard Quantity = 25,800
Standard Price = 4.85
1)a. Direct Material Price variance = (Standard price – Actual Price)*Actual Quantity
= (4.85 - 4.90) * 28,000
= $1,400 U
b. Direct Material Quantity variance = (Standard Quantity – Actual Quantity)*Standard price
= (51,600*0.5 - 28,000)*4.85
= $10,670 U
2) a. Direct Labor Rate Variance = (Standard Rate – Actual Rate)*Actual Hours
= (21.20 - 20.2) * 8,650
= $8,650 F
b. Direct Labor Efficiency variance = (Standard Hours – Actual Hours)*Standard rate
= (51,600*1/6 - 8,650) * 21.20
= $1,060 U
The GoT cups are a fast seller and you need to ensure that you have enough rolls of paper to fulfill demand. The first stage in the process is to determine the total cost of the current inventory ordering model. Given the following information, how many rolls should they order to minimize costs?H: $1.75 per unitD: 500 rolls per monthQ: 100 units ordered at a timeS: $25 per order
Answer:
EOQ = 414 rolls
Explanation:
In order to calculate the number of orders to minimize the cost, we should calculate that by using the Economic order quantity model.
DATA
Holding cost = $1.75/unit
Annual demand = 500 rolls x 12 = 6000 rolls
Ordering cost = $25
Formula
EOQ =[tex]\sqrt{\frac{2Cod}{Ch} }[/tex]
Where
Co = ordering cost
D = Annual demand
Ch = Holding cost
Solution
EOQ = [tex]\sqrt{\frac{2(6000)(25)}{1.75} }[/tex]
EOQ = [tex]\sqrt{\frac{300000}{1.75} }[/tex]
EOQ = 414 rolls
They should order 414 rolls to minimize the cost.
Answer:
119 units
Explanation:
The economic order quantity is the minimum amount of inventory that a seller must keep to demand and lower the holding cost. The ordering cost is $25 per order. Holding cost is $1.75 per unit. The total demand is 500 units per month. The economic order quantity that will minimize the cost of the GoT cups is
EOQ = [tex]\sqrt{\frac{2*Demand*ordering cost}{Holding cost} }[/tex]
EOQ is 119 units.
Oriole Company uses flexible budgets. At normal capacity of 15000 units, budgeted manufacturing overhead is $120000 variable and $360000 fixed. If Oriole had actual overhead costs of $483000 for 18000 units produced, what is the difference between actual and budgeted costs
Answer:
$21,000 favorable
Explanation:
Given the above information,
Variable overhead rate = $120,000 / 15 units
= $8
Overhead variance = Real - Allocated
= $483,000 - (8 × 18,000 + $360,000 )
= $483,000 - $504,000
= $21,000 favorable
In a task assignment situation, in how many different ways can five jobs be assigned to five machines if each job must be assigned to each machine and each machine must be assigned one job?
A. 5
B. 1
C. 3,125
D. 120
E. 25
Answer: D. 120
Explanation:
The first machine being assigned a job can be assigned one from 5 jobs.
Once that happens, the next machine can only be assigned from any one of 4 jobs.
The next machine, any one of 3 jobs.
The next machine, any one of 2 jobs.
The Last machine gets the last job remaining.
The different ways a job can be assigned therefore are;
= 5 * 4 * 3 * 2 * 1
= 120
Abey Kuruvilla, of Parkside Plumbing, uses 1,210 of a certain spare part that costs $26 for each order, with an annual holding cost of $24. a) Calculate the total cost for order sizes of 25, 40, 50, 60, and 100 (round your responses to two decimal places).
Answer:
Annual demand(D) = 1,210
Ordering cost(S) = $26
Annual holding cost (H) = $24
With the order quantity(Q) = 25,
Total cost = Holding cost + ordering cost
= [(Q/2)H] + [(D/Q)S]
= [(25/2)24] + [(1210/25)26]
= $300 + $1258.4
= $1558.4
With the order quantity(Q) = 40,
Total cost = Holding cost + ordering cost
= [(Q/2)H] + [(D/Q)S]
= [(40/2)24] + [(1210/40)26]
= $480 + $786.5
= $1266.5
With the order quantity(Q) = 50,
Total cost = Holding cost + ordering cost
= [(Q/2)H] + [(D/Q)S]
= [(50/2)24] + [(1210/50)26]
= $600 + $605
= $1205
With the order quantity(Q) = 60,
Total cost = Holding cost + ordering cost
= [(Q/2)H] + [(D/Q)S]
= [(60/2)24] + [(1210/60)26]
= $720 + $524.33
= $1244.33
With the order quantity(Q) = 100,
Total cost = Holding cost + ordering cost
= [(Q/2)H] + [(D/Q)S]
= [(100/2)24] + [(1210/100)26]
= $1200 + $314.6
= $1514.6
3. “The International Monetary Fund (IMF) and the World Bank are two institutions that have outlived their usefulness”. Do you agree?
Answer:
“The International Monetary Fund (IMF) and the World Bank"
Have they outlived their usefulness?
No.
The IMF and the World Bank have not outlived their usefulness. They remain very useful and relevant to our world today. The problem they have experienced stem in part from the neglect of their purposes, because of the near-absence of the grassroot touch. They can refocus on their purposes and reduce elitistism, and then they continue to be useful.
But, they cannot rediscover and concentrate on their purposes without the cooperation of member-countries. Recalcitrancy does not allow any organized institutions without police power to function at their best. Member-countries must learn to cooperate with these bodies to achieve their purposes. There is still global poverty ravaging the world population, even among the rich and developed countries of the world.
In most developing countries, their national governments are traditionally entrenched as anti-developmental. While they make long and meaningless speeches at world fora, back home they do not walk their talk and so often renege on their promises. This is why it seems that the impact of these world bodies are not being felt. National governments must be able to show responsibility to allow the effects of monetary policies and agreements to benefit the poor and the vulnerable.
Explanation:
The World Bank is an international body of the United Nations with about 189 member-countries. It works with developing countries to reduce poverty, increase access to wealth, and promote global prosperity. The IMF is responsible for ensuring that the international monetary system is operational and stable to ginger sustainable global economic growth.
A publishing company sells 1,250,000 copies of certain books each year. It costs the company $1 to store each book for a year. Each time it must print additional copies, it costs the company $250 to set up the presses. How many books should the company produce during each printing in order to minimize its total storage and setup costs
Answer:
The Company should produce 25,000 books
Explanation:
The production size that minimizes total storage and setup costs is known as the optimum batch size.
Optimum batch size = √(2 × Annual Production Demand × Set up Cost) / Storage Cost per unit
= √ (2 × 1,250,000 × $250) / $1
= 25,000 books
Conclusion :
The Company should produce 25,000 books during each printing in order to minimize its total storage and setup costs.
On January 1, Power House Co. prepaid the annual rent of $10,140. Prepare the journal entry to record this transaction.
Answer and Explanation:
The journal entry to record the given transaction is shown below:
Prepaid rent Dr $10,140
To Cash $10,140
(Being the prepaid annual rent paid in cash is recorded)
For recording this we debited the prepaid rent as it increased the assets and credited the cash as it reduced the cash so that the proper posting could be done
whatis the general termfor resources used by a business to produce good or services referred to as
Answer:
Factors of Production
TB MC Qu. 9-100 The following labor standards have been ... The following labor standards have been established for a particular product: Standard labor-hours per unit of output 9.6 hours Standard labor rate $ 13.40 per hour The following data pertain to operations concerning the product for the last month: Actual hours worked 7,400 hours Actual total labor cost $ 96,200 Actual output 950 units What is the labor efficiency variance for the month
Answer:
Direct labor time (efficiency) variance= $23,048 favorable
Explanation:
Giving the following information:
Standard labor-hours per unit of output 9.6 hours
Standard labor rate $ 13.40 per hour
Actual hours worked 7,400 hours
Actual output 950 units
To calculate the direct labor efficiency variance, we need to use the following formula:
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Standard quantity= 9.6*950= 9,120
Direct labor time (efficiency) variance= (9,120 - 7,400)*13.4
Direct labor time (efficiency) variance= $23,048 favorable
You short-sell 100 shares of Tuckerton Trading Co., now selling for $44 per share. What is your maximum possible gain, ignoring transactions cost
Answer:
$4,400
Explanation:
Calculation for the maximum possible gain, ignoring transactions cost
Using this formula
Maximum possible gain = Sale proceeds - Cost of purchasing the share
Let plug in the formula
Maximum possible gain = (100 shares *$44 per shares)- (100 shares *0) = 14000
Maximum possible gain=$4,400-0
Maximum possible gain=$4,400
Therefore the maximum possible gain, ignoring transactions cost will be $4,400
Which of the following statements about executing and evaluating the promotion program is most accurate?
a. Although there are five elements in the promotional mix, the only element that reallybenefits from an IMC audit is advertising.
b. Most IMC programs have no difficulty creating a pretest, but posttests are much moredifficult to construct since a number of unknown elements must be measured.
c. To fully benefit from IMC programs, companies must create and maintain a test-resultdatabase that allows comparisons of the relative impact of the promotional tools and theirexecution options in varying situations.
d. The ideal IMC program does not need any evaluation if it is executed according to plan.E. The most effective IMC audits are external. Internal audits tend to skew results to fitexpectations.
Answer: To fully benefit from IMC programs, companies must create and maintain a test-resultdatabase that allows comparisons of the relative impact of the promotional tools and their execution options in varying situations.
Explanation:
Out of the statements about executing and evaluating the promotion program that were given in the question, the option that is most accurate is that to fully benefit from IMC programs, companies must create and maintain a test-result database that allows comparisons of the relative impact of the promotional tools and their execution options in varying situations.
Therefore, option C is the correct answer.
In Rooney Company, direct labor is $18 per hour. The company expects to operate at 12,000 direct labor hours each month. In January 2017, direct labor totaling $222,400 is incurred in working 12,600 hours.
Prepare a flexible budget report.
Answer:
Flexible budget Report for Rooney Company
Flexed budget Actual Variance
Labour hours 12,600 12,600
Labour cost($) 226,800 222,400 4,400 Favorable
Explanation:
A flexible budget is that which is prepared to reflect the actual activity level achieved.
It is useful for a control purpose; to compare the actual result to the expected performance. The expected performance is the the flexible budget which is a revised master budget.
Also it uses the assumptions of the static budget like standard costs and prices.
Flexed budget for labour = standard hour × actual labour cost
= $18× 12,600 = $ 226,800
Flexible budget Report for Rooney Company
Flexed budget Actual Variance
Labour hours 12,600 12,600
Labour cost($) 226,800 222,400 4,400 Favorable
If the rate of inflation is 2.2% per year, the future price pt (in dollars) of a certain item can be modeled by the following exponential function, where t is the number of years from today.
p(t)=1200(1.039^t)
Find the current price of the item and the price 9 years from today.
Answer:
1693.25
Explanation:
The computation of the current price of the item and the price 9 years from today is shown below:-
p(t) = 1,200 × (1.039)^t
Now, the current price can be found by putting t = 0
p(0) is
[tex]1,200\times (1.039)^0 = $1,200[/tex]
The price 10 years from today
p(9) is
[tex]1,200\times (1.039)^9[/tex]
Now we will solve the above equation
= 1,200 × 1.411041958
= 1693.25035
or
= 1693.25
assume that autonomous consumption is $1610 billion and disposable income is $11,200 billion. Using the consumption function, calculate consumption expenditure
Answer: $9,226
Explanation;
The consumption function is;
Consumption = Autonomous consumption + (Marginal Propensity to consume * Disposable income)
Marginal Propensity to Consume;
=Increase in consumption expenditure/ Increase in Disposable income
= 680/1,000
= 0.68
Consumption = Autonomous consumption + (Marginal Propensity to consume * Disposable income)
= 1,610 + ( 0.68 * 11,200)
= $9,226
f covered interest arbitrage opportunities do not exist, Group of answer choices interest rate parity holds. interest rate parity does not hold. interest rate parity holds, and arbitragers will be able to make risk-free profits. arbitragers will be able to make risk-free profits. interest rate parity does not hold, and arbitragers will be able to make risk-free profits.
Answer: interest rate parity holds
Explanation:
Covered interest arbitrage is a trading strategy that is used by an investor when the person whereby takes advantage of the differences in interest rate between two nations and invest in the currency that brings higher value.
If covered interest arbitrage opportunities do not exist, it simply means that interest rate parity holds.
Who is responsible for responding to workflow(s) for equipment dispatch requests through the business workplace require An approving authority must approve
Answer:
Commander
Explanation:
GCSS-Army is short for Global Combat Support System-Army. The GCSS is a section of the United States Army that is fielded under the 11th Armored Cavalry Regiment. There are the GCSS Wave 1 and GCSS Wave 2. These two groups have different roles.
The role of the Commander falls under the Wave 2 functions where he is required to perform the roles of maintenance, dispatch, unit supply, and property book functions. The Wave 1 function is mostly about allowing access to support supply activity functions. The commanders in any organization they work with can screen several transactions and give approval for equipment dispatch.
When a deliverable arrived, Craig met with the team member responsible
for ordering the deliverable to confirm it was the correct model and size.
Which of the following project elements was Craig monitoring in this scenario?
a. Budget
b. Schedule
c. Scope
d. Risk
Answer:
Project Element Craig Monitored in this scenario:
d. Risk
Explanation:
The element of the project that Craig monitored ensures that the deliverable conforms with the correct model and size because there is the risk that this could not conform if a deliverable was not not checked with the team member who ordered the deliverable. Since higher risks of deliverables not conforming to model and size would render the whole project unsuccessful, Craig has to meet with the team member responsible. In order words, the meeting between Craig and the team member for confirmation of correct model and size eliminates the risks of non-conformance.
In the example above when deliverable came and Craig met with the team member for ordering confirming whether the model and size was correct, Craig was monitoring Risk. So the correct option is D.
Risk refers to the possibility chances that the desired or the expected result will be obtained from the activities that are undertaken. Risk is directly related to the reward of such activity.
In the example above where Craig confirms whether the model and size of goods arrived were correct with the help of the team member who ordered such deliverable, risk was being monitored.In this case the risk can be denoted by value of 1 as the chances of getting the correct model and size are equal with chances of getting the incorrect model and size. Risk can be denoted by beta .[tex]\rm Risk = \beta[/tex]
Monitoring of risk is an important aspect so as to ensure whether the activities undertaken for the benefit of the business are standing true to their efforts or not.
Hence, the correct option is D that Craig was monitoring risk by checking the deliverable was correct in terms of model and size with the help of a team member.
To know more about risk monitoring, click the link below.
https://brainly.com/question/1510213
