Answer:
b. False
Explanation:
Decomposing and modularizing means that a large software is being divided into smaller named components that have a well-defined interfaces which basically describes the component interactions. The main goal is to place these different functionalities as well as the responsibilities in different components.
Decomposition and modularization forms the principle of software design.
Hence, the answer is false.
Write a procedure named Read10 that reads exactly ten characters from standard input into an array of BYTE named myString. Use the LOOP instruction with indirect addressing, and call the ReadChar procedure from the book's link library. (ReadChar returns its value in AL.)
Answer:
Following are the solution to the given question:
Explanation:
Since a procedure has the Read10 parameter, the 10 characters from the input file are stored in the BYTE array as myString. The LOOP instruction, which includes indirect addressing and also the call to the ReadChar method, please find the attached file of the procedure:
mention three external power problems that affect computer's internal power supply ,if computer is plugged in the wall.
Answer:
Explanation: here are three subsets of regulated power supplies: linear, switched, and battery-based. Of the three basic regulated power supply designs, linear is the least complicated system, but switched and battery power have their advantages.
Write a program that lets the user enter the total rainfall for each of 12 months into an array of doubles. The program should calculate and display the total rainfall for the year and the average monthly rainfall. Use bubble sort and sort the months with the lowest to highest rain amounts. Use the binary search and search for a specific rain amount. If the rain amount is found, display a message showing which month had that rain amount. Input Validation: Do not accept negative numbers for monthly rainfall figures.
Answer:
Program approach:-
Using the header file.Using the standard namespace I/O.Define the main function.Check whether entered the value is negative.Find the middle position of the array.Display message if value not found.Returning the value.Explanation:
Program:-
//required headers
#include <stdio.h>
#include<iostream>
using namespace std;
//main function
int main()
{ double rain[12], temp_rain[12], sum=0, avg=0, temp;
int month=0, i, j, n=12, low=0, mid=0, high=12, x, found=0;
char month_name[][12]={"January", "February", "March", "April", "May", "June",
"July", "August", "September", "October", "November", "December"};
//store input values to arrays rain and temp_rain
while(month<n)
{ cout<<"Enter the total rainfall for month "<<month+1<<" :";
cin>>temp;
//check whether the entered value is negative
if(temp<0)
{ cout<<"Enter a non negative value"<<endl;
}
else
{ rain[month]=temp;
temp_rain[month]=temp;
//total sum is found out and stored to sum
sum+=temp;
month++;
}
}
//find average rainfall
avg=sum/n;
//display total and average rainfall for the year
cout<<"Total rainfall for the year: "<<sum<<endl;
cout<<"Average rainfall for the year: "<<avg<<endl;
//perform bubble sort on temp_rain array
for(i=0; i<n-1; i++)
{ for (j=0; j<n-i-1; j++)
{ if (temp_rain[j]>temp_rain[j+1])
{
temp=rain[j];
temp_rain[j]=temp_rain[j+1];
temp_rain[j+1]=temp;
}
}
}
//get search value and store it to x
cout<<"Enter the value to search for a specific rain amount: ";
cin>>x;
//perform binary search on temp_rain array
while (low<=high)
{
//find the middle position of the array
int mid=(low+high)/2;
//if a match is found, set found=1
if(x==temp_rain[mid])
{ found=1;
break;
}
//ignore right half if search item is less than the middle value of the array
else if(x<temp_rain[mid])
high=mid-1;
//ignore left half if search item is higher than the middle value of the array
else
low=mid+1;
}
//if a match is found, then display the month for the found value
if(found==1)
{
for(i=0; i<n; i++)
{ if(x==rain[i])
cout<<"Found matching rainfall for this month: "<<month_name[i];
}
}
//display message if value not found
else
cout<<"Value not found.";
return 0;
}
What is the name given to software that decodes information from a digital file so that a media player can display the file? hard drive plug-in flash player MP3
Answer:
plug-in
Explanation:
A Plug-in is a software that provides additional functionalities to existing programs. The need for them stems from the fact that users might want additional features or functions that were not available in the original program. Digital audio, video, and web browsers use plug-ins to update the already existing programs or to display audio/video through a media file. Plug-ins save the users of the stress of having to wait till a new product with the functionality that they want is produced.
Answer:
B plug-in
Explanation:
Edge2022
An array A[0..n - 2] contains `n-1` integers from 1 to `n` in increasing order. (Thus one integer in this range is missing.) Design an algorithm in $\Theta(\log n)$ to find the missing integer. Your algorithm should be given in **pseudo code**. For example, the array `A` could be `{1, 2, 3, 4, 6, 7, 8, 9, 10}` in which `5` is missing.
Answer:
I do not understand anything
Which of the following is a reason to use storyboarding? (Select all that apply)
Group of answer choices
To have all your ideas in one place
Storyboarding is not useful, so you don’t need to worry about using it
To conceptualize design ideas
To present ideas to a client
Answer:
To have all your ideas in one place
To conceptualize design ideas
To present ideas to a client
Explanation:
A storyboard refera to a graphic organizer which consists of images which are displayed in sequence in order to pre-visualise an animation, motion picture, etc.
It is important as it conveys how a story will flow, and also help in conceptualizing design ideas. Based on the options given, the correct options are:
• To have all your ideas in one place
• To conceptualize design ideas
• To present ideas to a client
Suppose that the first goal in a GP problem is to make 3 X1 + 4 X2 approximately equal to 36. Using the deviational variables d1− and d1+, the following constraint can be used to express this goal.
3 X1 + 4 X2 + d1− − d1+ = 36
If we obtain a solution where X1 = 6 and X2 = 2, what values do the deviational variables assume?
a. d1− = 0, d1+ = 10
b. d1− = 6, d1+ = 0
c. d1− = 5, d1+ = 5
d. d1− = 10, d1+ = 0
Answer:
d. d1− = 10, d1+ = 0
Explanation:
Given
3X1 + 4X2 +d1− − d1+ = 36
X1 = 6
X2 = 2
Required
Possible values of d1- and d1+
We have:
3X1 + 4X2 +d1− − d1+ = 36
Substitute values for X1 and X2
3 *6 + 4 * 2 + d1- - d1+ = 36
18 + 8 + d1- - d1+ = 36
Collect like terms
d1- - d1+ = 36 - 18 - 8
d1- - d1+ = 10
For the above equation to be true, the following inequality must be true
d1- > d1+
Hence,
(d) is correct
Because:
10 > 0
Write a function called rotateRight that takes a String as its first argument and a positive int as its second argument and rotates the String right by the given number of characters. Any characters that get moved off the right side of the string should wrap around to the left.
Answer:
The function in Python is as follows:
def rotateRight(strng, d):
lent = len(strng)
retString = strng[lent - d : ] + strng[0 : lent - d]
return retString
Explanation:
This defines the function
def rotateRight(strng, d):
This calculates the length of the string
lent = len(strng)
This calculates the return string
retString = strng[lent - d : ] + strng[0 : lent - d]
This returns the return string
return retString
Addition:
The return string is calculated as thus:
This string is split from the index passed to the function to the last element of the string, i.e. from dth to last.
The split string is then concatenated to the beginning of the remaining string
After the explosion of the Union Carbide plant the fire brigade began to spray a curtain of water in the air to knock down the cloud of gas.a. The system of water spray pipes was too high to helpb. The system of water spray pipes was too low to helpc. The system of water spray pipes broked. The system of water spray pipes did not have sufficient water supply
Answer:
d. The system of water spray pipes did not have sufficient water supply
Explanation:
The Union Carbide India Ltd. was chemical factory situated at Bhopal that produces various pesticides, batteries, plastics, welding equipment, etc. The plant in Bhopal produces pesticides. In the year 1984, on the night of 2nd December, a devastating disaster occurred on the Bhopal plant which killed millions of people due to the leakage of the poisonous, methyl isocyanate. This disaster is known as Bhopal Gas tragedy.
Soon after the gas pipe exploded, the fire brigade started spraying water into the air to [tex]\text{knock down}[/tex] the cloud of the gases in the air but there was not sufficient amount of water in the water sprays and so it was not effective.
Thus the correct answer is option (d).
IT specialists must display technical expertise and collaborative proficiency in the workplace. Select the IT specialist who demonstrates a soft skill.
a. Terri uses her Java programming skills to write a key part of the company’s new software.
b. Joyce recruits users to test new software by explaining to them how it will benefit the organization.
c. Chandler evaluates the results of recent user tests of his company's new software.
d. Keith applies a filter to the company’s network that prevents users from accessing social media while they are working.
Answer:
b. Joyce recruits users to test new software by explaining to them how it will benefit the organization.
Explanation:
Skills can be classified as hard or soft. Hard skills include skills such as technical skills that are acquired through technical knowledge and training.
Soft skills on the other hand are skills exhibited as a result of personality traits, character and behaviours such as time management, leadership, communication and organizational skills.
Some hard skills include;
i. Ability to design banners and posters
ii. Proficiency in using programming languages such as Java to build software applications
iii. Evaluating the result of a test or research.
Some soft skills include;
i. Making public speeches that captivate the audience.
ii. Ability to recruit and test capabilities in others.
iii. Leading a team
So, Joyce recruiting users to test new software by explaining to them how it will benefit the organization is a form of soft skill since it consists, at minimum, of leadership and communication skills
computer is an ............. machine because once a task is intitated computer proceeds on its own t ill its completion.
Answer:
I think digital,versatile
computer is an electronic digital versatile machine because once a task is initiated computer proceeds on its own till its completation.
In this project you will write a set of instructions (algorithm). The two grids below have colored boxes in different
locations. You will create instructions to move the colored boxes in grid one to their final location in grid two. Use the
example to help you. The algorithm that you will write should be in everyday language
(no pseudocode or programming language). Write your instructions at the bottom of the
page.
Example: 1. Move
the orange box 2
spaces to the right.
2. Move the green
box one space
down. 3. Move the
green box two
spaces to the left.
Write your instructions. Review the rubric to check your final work.
Rules: All 6 colors (red, green, yellow, pink, blue, purple) must be move to their new location on the grid. Block spaces are
barriers. You cannot move through them or on them – you must move around them
Answer:
Explanation:
Pink: Down 5 then left 2.
Yellow: Left 3 and down 2.
Green: Right 7, down 4 and left 1.
Purple: Up 6 and left 9.
Red: Left 7, down 5 and left 1.
You can do the last one, blue :)
Answer:
Explanation:
u=up, d=down, r=right, l=left
yellow: l3d2
pink: d5l2
green: r7d4l1
purple: u6l9
red: l7d5l1
blue: r2u7l5
7. Lower than specified oil pressure is measured on a high-mileage engine. Technician A says that worn main or rod bearings could be the cause. Technician B says that a clogged
oil pump pickup screen could be the cause. Who is correct?
O A. Neither Technician A nor B
O B. Technician B
O C. Technician A
O D. Both Technicians A and B
Decision support systems (or DSSs) model information using OLAP, which provides assistance in evaluating and choosing among different courses of action. Which of the following does not represent an example of a DSS in business?
a. An insurance company using a system to gauge risk of providing insurance to drivers who have imperfect driving records
b. A medical doctor entering symptoms into a system to aid in diagnosing and treating patients
c. A manufacturing digital dashboard showing visualizations of inventory and production
d. A dentist entering symptoms into a system to help diagnose and treat patients
Answer:
C
Explanation:
Decision Support Systems (DSSs) model information using OLAP, helps in providing assistance to evaluate and choose among different course of action.
For option A, an insurance company using DSS to evaluate risk of providing insurance to drivers who doesn't have perfect records and option B and D medical doctor entering symptoms into a system to aid in diagnosing and treating patients and dentist entering symptoms into a system to help diagnose and treat patients respectively
what are the physical aspect of a presentation
Answer:
1. It has a clear objective.
2. It's useful to your audience.
3. It's well-rehearsed.
4. Your presentation deck uses as little text as possible.
5. Your contact information is clearly featured.
6. It includes a call-to-action.
Explanation:
PLS PAK I ANSWER NITO KAILANGAN LANGPO
1. E-gro.up
2. Faceb.ook
3. Gm.ail
4. Go to www.gm.ail.com
5. Gm.ail
6. Go to www.faceb.ook.com
These are the answers.
Give two examples of html structure
Answer:
semantic information that tells a browser how to display a page and mark up the content within a document
pleeeese help me for these questions
1 Account
2 online
3 access
4 password
5 internet
6 email
Examine the following output:
4 22 ms 21 ms 22 ms sttlwa01gr02.bb.ispxy.com [154.11.10.62]
5 39 ms 39 ms 65 ms placa01gr00.bb.ispxy.com [154.11.12.11]
6 39 ms 39 ms 39 ms Rwest.plalca01gr00.bb.ispxy.com [154.11.3.14]
7 40 ms 39 ms 46 ms svl-core-03.inet.ispxy.net [204.171.205.29]
8 75 ms 117 ms 63 ms dia-core-01.inet.ispxy.net [205.171.142.1]
Which command produced this output?
a. tracert
b. ping
c. nslookup
d. netstat
Answer:
a. tracert
Explanation:
Tracert is a computer network diagnostic demand which displays possible routes for internet protocol network. It also measures transit delays of packets across network. The given output is produced by a tracert command.
Explain why it is important for you to build proficiency with Microsoft Word.
Answer:
Listing proficiency in Microsoft helps push your resume through applicant tracking systems and into human hands for review. Advanced knowledge of Microsoft Office programs can also increase your earning potential.
Microsoft's skills on your resume can help it get past applicant tracking systems and into human hands for review. Additionally, having more in-depth knowledge of Microsoft Office applications can boost your earning potential.
What is Microsoft skills?Your proficiency and expertise with the Microsoft Office family of software products are collectively referred to as Microsoft Office skills.
Although MS Office has many various programs, employers may frequently assess your proficiency with some of the most widely used ones, such as MS Excel, MS PowerPoint, and MS Word.
The most popular business productivity software globally is Microsoft Office.
Therefore, Microsoft's skills on your resume can help it get past applicant tracking systems and into human hands for review.
Learn more about Microsoft, here:
https://brainly.com/question/28887719
#SPJ2
3 Marks] Q 2. A host has the IP address 196.22.44.133/21. What are the network address, broadcast address and valid host addresses for the IP subnet which the host is a member of
Answer:
Address: 192.22.44.133 11000000.00010110.0 0101100.10000101
Netmask: 255.255.128.0 11111111.11111111.1 0000000.00000000
Network: 192.22.0.0/17 11000000.00010110.0 0000000.00000000 (Class C)
Broadcast: 192.22.127.255 11000000.00010110.0 1111111.11111111
HostMin: 192.22.0.1 11000000.00010110.0 0000000.00000001
HostMax: 192.22.127.254 11000000.00010110.0 1111111.11111110
Explanation:
Create a list of lists, named hamsplits, such that hamsplits[i] is a list of all the words in the i-th sentence of the text. The sentences should be stored in the order that they appear, and so should the words within each sentence. Regarding how to break up the text into sentences and how to store the words, the guidelines are as follows: Sentences end with '.', '?', and '!'. You should convert all letters to lowercase. For each word, strip out any punctuation. For instance, in the text above, the first and last sentences would be: hamsplits[0] == ['and', 'can', 'you', 'by', ..., 'dangerous', 'lunacy'] hamsplits[-1] == ['madness', 'in', 'great', ..., 'not', 'unwatchd', 'go']
Answer:
Explanation:
The following code is written in Python. It takes in a story as a parameter and splits it into sentences. Then it adds those sentences into the list of lists called hamsplits, cleaned up and in lowercase. A test case is used in the picture below and called so that it shows an output of the sentence in the second element of the hamsplits list.
def Brainly(story):
story_split = re.split('[.?!]', story.lower())
hamsplits = []
for sentence in story_split:
hamsplits.append(sentence.split(' '))
for list in hamsplits:
for word in list:
if word == '':
list.remove(word)
A computer never gets tired or bored while working for a long time _______
Answer:
Diligence
Explanation:
The computer possess several qualities including tbe ability to be consistent with its task and accuracy of its output. When describing a person or machine that delivers so much over a long periodof time without being weary, bored or tired, such person or machine could be described as being Diligent. Depending on the task a computer is being used to execute, computer machines are usually being used in a non-stop manner. For instance, firms that works on shift basis may have 3 to 4 working shifts per day with each shift making use of the same computer used by the previous shift everyday for several number of days. Example are telecommunications customer service firms who work on a 24 hours basis.
kkklkkklkklklkklklklkklkl
Answer:
???
Explanation:
???
The following pseudocode describes how a widget company computes the price of an order from the total price and the number of the widgets that were ordered. Read the number of widgets. Multiple the number of widgets by the price per widget of 9.99. Compute the tax (5.5 percent of the total price). Compute the shipping charge (.40 per widget). The price of the order is the sum of the total widget price, the tax, and the shipping charge. Print the price of the order
Answer:
The program in Python is as follows:
widget = int(input("Widgets: "))
price = widget * 9.9
tax = price * 0.55
ship = price * 0.40
totalprice = price + tax + ship
print("Total Price: $",totalprice)
Explanation:
The question is incomplete, as what is required is not stated.
However, I will write convert the pseudocode to a programming language (in Python)
Get the number of widgets
widget = int(input("Widgets: "))
Calculate price
price = widget * 9.9
Calculate the tax
tax = price * 0.55
Calculate the shipping price
ship = price * 0.40
Calculate the total price
totalprice = price + tax + ship
Print the calculated total price
print("Total Price: $",totalprice)
diagram of a central processing unit
which one is exit controllefd loop ?
1.while loop
2. for loop
3. do loop
4. none
Answer:
2 is the ans
Explanation:
bye bye, gonna go to studyy
write a program to update the rate by increasing 20% from sequential data file "items.dat" that store item name.rate and quantity
Answer:
your answer is in the pic
(◔‿◔)
｡◕‿◕｡
How does a distributed operating system work?
Answer:
A distributed operating system is system software over a collection of independent, networked, communicating, and physically separate computational nodes. They handle jobs which are serviced by multiple CPUs. Each individual node holds a specific software subset of the global aggregate operating system.
These systems run on a server and provide the capability to manage data, users, groups, security, applications, and other networking functions.
plz mark it as brainliest
Answer:
Explanation:A distributed operating system is system software over a collection of independent, networked, communicating, and physically separate computational nodes. They handle jobs which are serviced by multiple CPUs. Each individual node holds a specific software subset of the global aggregate operating system.
How are dates and times stored by Excel?
Answer:
Regardless of how you have formatted a cell to display a date or time, Excel always internally stores dates And times the same way. Excel stores dates and times as a number representing the number of days since 1900-Jan-0, plus a fractional portion of a 24 hour day: ddddd. tttttt
Explanation:
mark me as BRAINLIEST
follow me
carry on learning
100 %sure
