Danielle has a coupon for buy 2 pairs of jeans and receive the third pair of equal or lesser value for free. One pair of jeans costs $45.00, another pair costs $39.50, and the last pair costs $57.00. If Danielle uses her coupon, what is her total cost for all 3 pairs of jeans?

The headstart that runner 1 must give runner 2 is approximately 0.8 meters, rounded to the nearest meter.

To determine the headstart that runner 1 must give runner 2 in order for them to run the same distance, we need to consider the relative positions of the runners and the width of the lanes.

Let's assume that the circular track has a circumference of C meters. Runner 1 runs along the inner lane, while runner 2 runs along the outer lane, which is 80 cm (0.8 meters) wider than the inner lane.

When runner 1 completes one lap around the track, they will have covered a distance equal to the circumference of the inner lane (C_inner). On the other hand, runner 2 will need to run an additional distance equal to the width of the outer lane (0.8 meters) to complete one lap around the track.

Since both runners need to cover the same distance for their runs to be equivalent, we can set up the following equation:

C_inner = C_outer + 0.8

Now, let's solve for the headstart that runner 1 must give runner 2:

C_inner = C_outer + 0.8

C_inner - C_outer = 0.8

Since the difference in distances between the inner and outer lanes is 0.8 meters, runner 1 needs to start 0.8 meters ahead of runner 2 for them to cover the same distance.

For more such questions on runner visit:

https://brainly.com/question/30661092

#SPJ8

The probability that a randomly selected person from the photography club is over 65 and male is approximately 50.7%.

To calculate the probability that a randomly selected person from the photography club is over 65 and male, we need to find the ratio of the number of men over 65 to the total number of members.

Given that there are 71 men in total and 36 of them are 65 years of age or older, the chances of selecting a man over 65 can be calculated as:

[tex]\[\frac{36}{71}\][/tex]

Simplifying the fraction, we have:

[tex]\[\frac{36}{71} \approx 0.507 \approx 50.7\%\][/tex]

The concept used in this question is probability. The concept of probability is applied to determine the chances of selecting a specific category (over 65 and male) from a given population.

Therefore, the chances that a randomly selected person from the photography club is over 65 and male is approximately 50.7%.

For more questions on probability:

https://brainly.com/question/30390037

#SPJ8

The volume of the block of wood is 262.617 cubic centimeters (cm³).

to find the volume of the block of wood, we need to multiply its three dimensions: length, width, and height.

given dimensions:length = 10.20 cm

width = 10.15 cmheight = 2.45 cm

volume = length × width × height

volume = 10.20 cm × 10.15 cm × 2.45 cm

to calculate the volume, we can multiply these values together:

volume = 262.617 cm³

A block of wood has dimensions 10. 20 cm by 10. 15 cm by 2. 45 cm. What is the volume of this block in units of cubic centimeters

Learn more about dimensions here:

https://brainly.com/question/31209488  

#SPJ11

Answer:

2,040,816 days ≈ 2.04 × 10⁶ days

Step-by-step explanation:

To calculate the time it takes for light to travel from the Sun to the Andromeda galaxy, we need to use the formula:

[tex]\boxed{\sf Time = \dfrac{Distance}{Speed}}[/tex]

Given:

Substitute these values into the formula:

[tex]\sf Time=\dfrac{1.2 \times 10^{19}\;miles}{5.88 \times 10^{12}\;miles/day}[/tex]

Simplify the calculation:

[tex]\sf Time=\dfrac{1.2}{5.88} \times \dfrac{10^{19}}{10^{12}}\;days[/tex]

Divide the numbers 1.2 and 5.88:

[tex]\sf Time=0.204081632...\times \dfrac{10^{19}}{10^{12}}\;days[/tex]

[tex]\textsf{Apply the exponent rule:} \quad \dfrac{a^b}{a^c}=a^{b-c}[/tex]

[tex]\sf Time= 0.204081632...\times 10^{19-12}\;days[/tex]

Therefore:

[tex]\begin{aligned}\sf Time&=\sf 0.204081632...\times 10^{7}\;days\\&=\sf 2.04081632...\times 10^{6}\;days\\&=\sf 2,040,816\;days\end{aligned}[/tex]

Therefore, it takes approximately 2.04 million days for light to travel from the Sun to the Andromeda galaxy.

The number of students whose favorite color is blue will be 40 students is the best prediction of the favorite colors by the 120 students based on the survey results given.

Here are the reasons why the other options are incorrect as follows: The number of students whose favorite color is green will be 12 more than the number of students who choose purple as their favorite color:

This statement cannot be a good prediction of the 120 students' favorite color.

It is possible that only two students chose purple, so if only two students choose purple as their favorite color, then the number of students whose favorite color is green would be 14, which does not make sense.

The number of students whose favorite color is red will be twice the number of students who choose purple as their favorite color:

This statement cannot be the best prediction of the 120 students' favorite color.

Even though 4 students chose red as their favorite color, only two students chose purple as their favorite color.

If the statement were accurate, then the number of students who chose red as their favorite color would be 4 × 2 = 8, which does not seem like a reasonable prediction.

The number of students whose favorite color is blue will be 12 less than the number of students who choose green: The statement cannot be the best prediction of the 120 students' favorite color.

Because according to the survey results, 8 students choose blue, but if this statement were accurate, the number of students who choose green would be 8 + 12 = 20.

This implies that the total number of students who choose blue is 20 - 12 = 8 students.

This is contradictory because the number of students who choose  is already given in the survey results. Therefore, this statement cannot be the best prediction.

To know more about students visit:

https://brainly.com/question/29101948

#SPJ11

Normal Saline (0.9% NaCl) is an isotonic crystalloid solution that is used to replenish fluids and electrolytes in patients with dehydration or hypovolemia.

The volume and rate of fluid infusion are calculated based on the patient's clinical condition and fluid status.  According to the given data ,A patient will receive 750ml of normal saline and the fluid is delivered at 25mL/hour. To determine the time that it will take for the fluid to infuse, we can use the formula: Time = Volume ÷ Rate  Substituting the given values into the formula: Time = 750 ÷ 25Time = 30  , it will take 30 hours for the 750ml of normal saline to infuse at a rate of 25mL/hour.

To know more about hypovolemia visit:

https://brainly.com/question/31118330

#SPJ11

The width of a confidence interval is primarily determined by the chosen confidence level, sample size, and variability of the data.

1. Confidence level: The confidence level represents the level of certainty desired in the estimation. A higher confidence level, such as 95% or 99%, requires a wider interval to capture a larger range of possible values within that level of confidence. Conversely, a lower confidence level, such as 90%, allows for a narrower interval.

2. Sample size: Increasing the sample size generally leads to a narrower confidence interval. With a larger sample, there is more data available to estimate the population parameter, resulting in a more precise estimate and reducing the margin of error.

3. Variability of the data: Higher variability in the data, indicated by a larger standard deviation or greater spread, requires a wider confidence interval. This is because a larger range of possible values is needed to account for the uncertainty associated with more variable data.

By adjusting these factors, researchers can control the width of the confidence interval, striking a balance between the desired level of confidence and the precision of the estimate.

learn more about confidence intervals here:
https://brainly.com/question/32546207

#SPJ11

the 19th term in the sequence is 150994944 and the 20th term in the sequence is 301989888.

The formula for the n-th term of a geometric sequence is a = arn−1where a is the first term, r is the common ratio, and n is the number of terms.

In the given sequence, a1 = 18, and a n = 2 a n−1 , which is a geometric sequence with common ratio r = 2.

The explicit formula of the sequence is a(n) = a1 x r^(n - 1) where a1 = 18 and r = 2.Using the explicit formula,a(19) = 18 x 2^(19-1) = 18 x 2^18 = 150994944a(20) = 18 x 2^(20-1) = 18 x 2^19 = 301989888

Given a geometric sequence a n =2a n-1 with an initial value of a 1 = 18. Let's find the explicit formula of the sequence.The formula for the n-th term of a geometric sequence is given as:

a = arn−1 Where a is the first term, r is the common ratio, and n is the number of terms. Here, a1 = 18, and a n = 2 a n−1.

Hence the common ratio r is 2.To find the explicit formula for this sequence, we substitute a1 and r in the above formula. Hence the explicit formula for this sequence is given as:

a(n) = a1 x r^(n - 1)where a1 = 18 and r = 2.Let's find the 19th and 20th term in the sequence using this explicit formula.

Substituting n = 19 in the explicit formula, we get,a(19) = 18 x 2^(19 - 1)= 18 x 2^18= 150994944

Substituting n = 20 in the explicit formula, we get,a(20) = 18 x 2^(20 - 1)= 18 x 2^19= 301989888Hence the 19th term in the sequence is 150994944 and the 20th term in the sequence is 301989888

The explicit formula of the sequence is a(n) = a1 x r^(n - 1) where a1 = 18 and r = 2.Using this formula, we have found that the 19th term in the sequence is 150994944 and the 20th term in the sequence is 301989888.

To know more about explicit formula visit:

brainly.com/question/25094536

#SPJ11

Approximately 4 hours ago, the colony contained 16,308 bacteria cells.

To determine the approximate number of bacteria cells in the colony 4 hours ago, we need to use the exponential growth formula.

The exponential growth formula is given by:

N(t) = N₀ * e^(k*t)

Where:

N(t) represents the number of bacteria cells at time t,

N₀ represents the initial number of bacteria cells,

k represents the growth rate constant,

t represents the time elapsed.

In this case, we know that the colony contains 6,000 cells now. Let's assume that 4 hours ago is our initial time (t = 0). So, N₀ = 6,000. The growth rate constant is given as 0.25 (k = 0.25). We want to find the number of bacteria cells 4 hours ago.

Plugging these values into the exponential growth formula:

N(t) = 6,000 * e^(0.25 * 4)

Simplifying the exponential expression:

N(t) = 6,000 * e^(1)

Since e^(1) is approximately 2.718 (the value of the natural logarithm base e), we can calculate: N(t) ≈ 6,000 * 2.718

N(t) ≈ 16,308

Therefore, approximately 4 hours ago, the colony contained 16,308 bacteria cells.

Learn more about bacteria cells here

https://brainly.com/question/32083898

#SPJ11

The predicted value of y is 53 for the given equation of the trend line.

Given equation of trend line is Yx = 3 + 10x.

We are supposed to determine the predicted value of y if x is 5.

To find the value of y, we have to substitute the value of x in the given equation:

Yx = 3 + 10x

When x = 5,

Then Yx = 3 + 10(5)

           = 3 + 50 = 53

So, the predicted value of y is 53. Therefore, 53 is the correct answer.

Trend lines are drawn at an angle and are used to determine a trend and help making trading decision.

A trend line should be connected by at least three highs or lows to make it valid.

To know more about trend line, visit:

https://brainly.com/question/29249936

#SPJ11

In the given expression, the terms that can be combined are 13 and 20.5, and 6.2y and -3/8y.

Combining like terms means adding or subtracting terms that have the same variable(s) and exponent(s). In the given expression, we have the terms 13, -x/5, 6.2y, 20.5x, and -3/8y.

First, we can combine the constant terms 13 and 20.5. Adding them together gives us 33.5.

Next, we have the terms 6.2y and -3/8y. These terms have the same variable, y, and can be combined by adding or subtracting their coefficients. Combining these terms gives us 6.2y - 3/8y.

The terms -x/5 and -3/8y cannot be combined because they have different variables (x and y).

Therefore, the terms that can be combined in the given expression are 13 and 20.5, resulting in 33.5, and 6.2y and -3/8y, resulting in 6.2y - 3/8y. The terms -x/5 and -3/8y cannot be combined.

Learn more about expression here:

https://brainly.com/question/29008327

#SPJ11

Answer:

its C

Step-by-step explanation:

edge

yo

The area of a towelette with double the base and double the height is 12 square inches.

A triangular towelette with a base of 2 inches and a height of 3 inches has an area of 3 square inches. If the base and height of the triangular towelette double, the area will quadruple (increase by a factor of 4) since the area of a triangle is proportional to the product of its base and height.Area of the original towelette is given by:(1/2)bh= (1/2)×2×3= 3 square inchesLet the new base and height be b and h respectively.

The new area of the towelette is given by:(1/2)bh= (1/2)×2(2)×3(2)= 12 square inchesTherefore, the area of a towelette with double the base and double the height is 12 square inches.

To know more about area visit:-

https://brainly.com/question/1631786

#SPJ11

The volume of the balloon before the addition of the extra gas was 7.01 liters.

We will use ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant and T is the temperature.

Given data:

Initial number of moles of helium in the balloon (before addition) = 4.51 moles

Additional number of moles of helium added = 1.25 moles

The total number of moles of helium in the balloon (after addition) is:

= 4.51 moles + 1.25 moles

= 5.76 moles

Volume of the balloon after addition = 8.97 liters

To find the volume of the balloon before the addition, we can rearrange the ideal gas law equation to solve for V:

V = (nRT)/P

The volume before the addition will be found using: V_initial = (n_initial * V_final) / n_final

V_initial = (4.51 * 8.97) / 5.76

V_initial = 7.02 liters.

Read more about volume

brainly.com/question/27710307

#SPJ4

The linear model with a slope of 2 grows at a constant rate over time. This means that it grows at a consistent pace, regardless of the initial value.

On the other hand, the exponential function with a growth rate of 10% grows at an increasing rate over time. Initially, the exponential model grows faster than the linear model because its growth rate is proportional to its current value.

However, as time goes on, the exponential model continues to accelerate its growth due to the compounding effect of the exponential function. Eventually, the exponential growth surpasses the linear growth, leading to a much faster growth rate.

For short-term investment, the linear model may be preferable as it provides a more predictable and stable growth pattern. The linear model's consistent rate of growth makes it easier to estimate and plan for returns in the short term.

For long-term investment, the exponential model would be better suited. The compounding effect of the exponential growth results in exponential returns over time. This can lead to significantly higher gains compared to the linear model. However, it's important to note that the exponential model may also carry more risk and volatility due to its accelerating growth rate.

Overall, the choice between a linear or exponential model depends on the specific investment goals, risk tolerance, and time horizon. The linear model offers stability and predictability in the short term, while the exponential model offers the potential for higher long-term returns, albeit with increased risk.

Learn more about linear model here -: brainly.com/question/28033207

#SPJ11

An exponential equation that is equal to x = 8 can be expressed as 2^3 = 8.

In an exponential equation, the base raised to the exponent equals the value of x. To create an exponential equation equal to x = 8, we need to determine the base and exponent.

In this case, the base is 2, and the exponent is 3. When we raise 2 to the power of 3 (2^3), we get 8. Therefore, the exponential equation 2^3 = 8 is equivalent to x = 8.

In the equation 2^3 = 8, the base 2 represents the factor by which x is being multiplied, and the exponent 3 represents the number of times the base is multiplied by itself. When we evaluate this equation, we find that 2^3 equals 8, which satisfies the condition x = 8.

To learn more about exponential equation click here: brainly.com/question/29506679

#SPJ11

The reflected coordinates are: A' = (-3, -4) and B' = (-6, 5). To reflect a point in the x-axis, we keep the x-coordinate the same and change the sign of the y-coordinate.

To reflect a point in the x-axis, we imagine a mirror placed horizontally at the x-axis. The reflection of the point occurs by flipping it across the x-axis. This means that the x-coordinate remains the same, but the sign of the y-coordinate changes.

Let's consider point A with coordinates (-3, 4). To reflect point A in the x-axis, we keep the x-coordinate (-3) the same, but change the sign of the y-coordinate (4) to -4. So, the reflected point A' is (-3, -4).

Now, let's move on to reflecting point B in the y-axis. This time, we imagine a mirror placed vertically at the y-axis. The reflection of the point occurs by flipping it across the y-axis. This means that the y-coordinate remains the same, but the sign of the x-coordinate changes.

Point B has coordinates (6, 5). To reflect point B in the y-axis, we keep the y-coordinate (5) the same, but change the sign of the x-coordinate (6) to -6. So, the reflected point B' is (-6, 5).

The reflection of point A (-3, 4) in the x-axis is A' (-3, -4).

The reflection of point B (6, 5) in the y-axis is B' (-6, 5).

learn more about reflected coordinates here: brainly.com/question/24215981

#SPJ11

The displacement of the hull of the sailboat is approximately 125 cubic feet.

To find the displacement of the hull of the sailboat, we can rearrange the given formula:

[tex]A=16\sqrt[3]{d^2} }[/tex]

We know that A = 400 ft², so we can substitute this value into the equation:

[tex]400=16\sqrt[3]{d^2} }[/tex]

Now, let's isolate the variable d:

[tex]\sqrt[3]{d^2} }=400/16\\\sqrt[3]{d^2} }=25[/tex]

Cube both sides of the equation to remove the radical:

[tex](d^2)^{1/3} = 25^3[/tex]

d² = 25³

d = √(25³)

d ≈ √(15625)

d ≈ 125

The complete question is:

The total recommended area A, in square feet, of a sailboat's sails is given by [tex]A=16\sqrt[3]{d^2} }[/tex] where d is the displacement of the hull in cubic feet. If a sailboat has 400 ft² of sail, what is the displacement of the hull of the sailboat?

To know more about sailboat:

https://brainly.com/question/19754579

#SPJ4

The perimeter of rectangle is given by 2 * (length * breadth). The other side of the rectangle labeled x is 120 - 3x.

Let's assume that the rectangle has sides of length L and W. We know that the perimeter of the fenced area is 260 meters, which means that:

2L + 2W = 260

Simplifying this equation, we can divide both sides by 2 to get:

L + W = 130

We also know that one of the sides of the rectangle is labeled 3x + 10. Let's assume that this side is equal to L, so we have:

L = 3x + 10

We can use this equation to substitute L in the previous equation, so we get:

(3x + 10) + W = 130

Simplifying this equation, we can subtract 10 from both sides:

3x + W = 120

Now we have two equations:

L + W = 130

3x + W = 120

We can use the second equation to solve for W in terms of x:

W = 120 - 3x

So the other side labeled x is equal to W, which is:

W = 120 - 3x

To know more about perimeter, visit:
brainly.com/question/9369181
#SPJ11

The table for converting decimeters to meters is straightforward. Each decimeter is equal to one-tenth of a meter, so to convert decimeters to meters, you divide the value in decimeters by 10.

To convert decimeters to meters, you can use the conversion factor of 1 decimeter = 0.1 meter. This means that each decimeter is equal to one-tenth of a meter. To convert a given value in decimeters to meters, you divide the value by 10. For example, if you have 50 decimeters, you divide 50 by 10 to get the equivalent value in meters, which is 5 meters. Another example, if you have 3 decimeters, dividing it by 10 gives you 0.3 meters.

To know more about decimeters here: brainly.com/question/30663570

#SPJ11

A square of side 18 inches is cut to make an open box with equal squares cut from each corner. The volume of the box to be 432 cubic inches. We have to find the minimum length of the sides of the squares cut from each corner.

Let x be the length of the sides of the squares cut from each corner. The length of the open box will be (18 - 2x), since we are cutting x length from each corner.Height of the box will be x. Volume of the box V = Length × Width × Height We know that, V = 432 cubic inches Given, V = Length × Width × Height We have, Length = (18 - 2x) Width = (18 - 2x)

Height = xV

[tex](18 - 2x) × (18 - 2x) × x= (18 - 2x)² × x= x(324 - 72 x + 4x²)[/tex]

=432 cubic inches

x(4x² - 72x + 324) - 432 = 0 Now, solving this equation, we get: 4x² - 72x + 324 - 432/x = 0 Multiplying both sides by x, we get: 4x³ - 72x² + 324x - 432 = 0 Factorizing it, we get:

4(x - 6)² (x - 3) = 0x = 3, 6 As the length of the side can not be negative.

Therefore, the minimum length of the side of the square cut from each corner be 3 inches.Volume, V of the box as a function of x can be calculated as follows:V = x(324 - 72x + 4x²)

= 4x³ - 72x² + 324 x cubic inches. Answer: Therefore, the minimum length of the side of the square cut from each corner should be 3 inches.

To know more about Volumes visit-

https://brainly.com/question/28058531

#SPJ11

To find the vertical drop of the slope, we can use trigonometry and the concept of the angle of elevation.

In this scenario, the angle of elevation is 20 degrees, and the length of the slope is 1800 feet. We want to determine the vertical drop, which represents the change in height.

Using trigonometry, we can use the tangent function, which relates the opposite side (vertical drop) to the adjacent side (length of the slope).

Tangent of the angle of elevation = vertical drop / length of the slope

tan(20 degrees) = vertical drop / 1800 feet

To find the vertical drop, we can rearrange the equation:

vertical drop = tan(20 degrees) * 1800 feet

Using a calculator, we can find the tangent of 20 degrees:

tan(20 degrees) ≈ 0.364

Plugging in the values:

vertical drop ≈ 0.364 * 1800 feet

vertical drop ≈ 655.2 feet

Therefore, the vertical drop of the slope is approximately 655.2 feet.

Learn more about angle here

https://brainly.com/question/25716982

#SPJ11

The finance charge on Rachel's loan, if she takes all 36 months to pay it off, is $1,730.16 (option B). This finance charge represents the total amount of interest that Rachel will pay over the course of the loan.

To calculate the finance charge, we first need to determine the total amount repaid by Rachel over the 36-month period. The monthly payment of $173.06 multiplied by 36 months gives us a total repayment of $6,225.36. Subtracting the original loan amount of $4,500 from this total repayment gives us the finance charge, which is $1,725.36.

However, we need to take into account any rounding or approximation in the answer choices. When rounding to the nearest cent, the finance charge becomes $1,730.16, which matches option B.

Therefore, the correct answer is option B, $1,730.16, representing the finance charge on Rachel's loan if she takes all 36 months to pay it off.

To learn more about loan click here: brainly.com/question/11794123

#SPJ11

In circle P, the segments can be matched to their names as follows:

Chord: AB, Diameter: AC, Secant: AD, Tangent: AE.

Chord: A chord is a line segment that connects two points on the circumference of a circle. In circle P, the chord is represented by the line segment AB, which connects points A and B on the circle.

Diameter: The diameter of a circle is a chord that passes through the center of the circle. In circle P, the diameter is represented by the line segment AC, which passes through the center point of the circle.

Secant: A secant is a line that intersects a circle at two distinct points. In circle P, the secant is represented by the line segment AD, which intersects the circle at points A and D.

Tangent: A tangent is a line that intersects a circle at exactly one point, known as the point of tangency. In circle P, the tangent is represented by the line segment AE, which intersects the circle at point A.

Learn more about Chord here:

https://brainly.com/question/2562191

#SPJ11

After 5 months, the total cost of the car from Sally Sue's dealership will be greater than the cost from Billie Jean's.

Sally Sue's dealership charges $250 per month and a $1,500 down payment. Billie Jean's dealership, on the other hand, charges $200 per month and a $2,200 down payment.

In order to determine after how many months Sally Sue's dealership will cost more than Billie Jean's dealership, a formula can be used.

That formula is: x = the number of months $250x + $1,500 = $200x + $2,200.

After simplification, the equation becomes:50x = 700x = 14

Therefore, Sally Sue's dealership will cost more than Billie Jean's dealership after 5 months.

Learn more about down payment here:

https://brainly.com/question/29075522

#SPJ11

Therefore, the simplified value of the expression 8.5 + (12 + 4) × 2 − 7 is 33.5.

To make simple or simpler: such as. : to reduce to basic essentials. : to diminish in scope or complexity : streamline. was urged to simplify management procedures. : to make more intelligible : clarify.

The simplified value of the expression below is 33.5.

Expression:8.5 + (12 + 4) × 2 − 7

To solve the given expression, let's use the order of operations, which is:

Parentheses, Exponents, Multiplication and Division (from left to right), Addition and Subtraction (from left to right)Now let's solve the expression using the above rule and get the answer.

8.5 + (12 + 4) × 2 − 7= 8.5 + 16 × 2 − 7

[Simplify (12+4)]  = 8.5 + 32 − 7 [Perform multiplication]  = 40.5 − 7 [Perform addition]  = 33.5

To know more about  simplified :

https://brainly.com/question/17579585

#SPJ11

To find the number of sales in 1989, we need to substitute the corresponding value of x into the given equation. Since x=0 corresponds to 1982, we need to calculate the value of y when x=7. Using the equation y=80x + 5700, the number of sales in 1989 is 6,860.

The given equation is y = 80x + 5700, where y represents the number of sales in year x, with x=0 corresponding to 1982.

To find the number of sales in 1989, we need to determine the value of y when x=7. Since x=0 corresponds to 1982, we count 7 years forward to reach 1989.

Substituting x=7 into the equation, we have:

y = 80(7) + 5700

y = 560 + 5700

y = 6,860

Therefore, the number of sales in 1989 is 6,860.

Learn more about equation here:

https://brainly.com/question/29538993

#SPJ11

The values from the set {5, 6, 7, 8} that make the inequality 5w > 30 true are 7 and 8.

To determine which values from the set {5, 6, 7, 8} make the inequality 5w > 30 true, we can substitute each value of w into the inequality and check if it satisfies the condition.

Let's evaluate each value:

For w = 5: 5(5) = 25, which is not greater than 30. So, 5 does not make the inequality true.

For w = 6: 5(6) = 30, which is equal to 30. Since the inequality is strictly greater than 30, 6 does not make the inequality true.

For w = 7: 5(7) = 35, which is greater than 30. So, 7 makes the inequality true.

For w = 8: 5(8) = 40, which is greater than 30. Thus, 8 also makes the inequality true.

Therefore, the values from the set {5, 6, 7, 8} that make the inequality 5w > 30 true are 7 and 8.

For more such answers on Set

https://brainly.com/question/30096176

#SPJ8

The correct answer to the statement "Television advertisements, interactions with salespeople, and bills or invoices are all examples of..." is customer touchpoints. The term customer touchpoints refer to the several ways that a customer may connect or communicate with a company or product.

These touchpoints can happen both during and after the sale .The three examples that are given in the statement, content loaded Television advertisements, interactions with salespeople, and bills or invoices are all examples of customer touchpoints. Let's have a look at each of these touchpoints: Television advertisements: Television advertisements are an effective way of promoting a company's products or services. It's a kind of customer touchpoint that is created by the company to reach a massive audience with a message. Interactions with salespeople: Interactions with salespeople are another customer touchpoint. These interactions can happen in a variety of settings, including a face-to-face meeting, a phone conversation, or a live chat on a website. Salespeople are essential in generating leads and closing deals.Bills or invoices: Bills or invoices are also an example of customer touchpoints. Customers interact with bills or invoices when they pay for products or services. It's an excellent opportunity to promote your products or services and advertise other products that customers might find useful.

Learn more about interactions here:

https://brainly.com/question/31385713

#SPJ11

In an isosceles triangle, the angles opposite the equal sides are congruent, thus, angle JML≈= angle LKJ

Since JM is perpendicular to ML whereas JK is perpendicular to KL, the congruence of triangles JMK and LMK can be deduced using the Side-Angle-Side (SAS) congruence principle.

This suggests that angle JKM and angle LKM are equivalent in measure. In other words, JK is almost the same length as ML, suggesting that the LKJ triangle is nearly an isosceles triangle.

If a triangle has two equal sides, then the angles facing those sides are also identical. Consequently, angle KJL is nearly identical to angle LJK. Given the nature of transitivity.

Learn more about SAS congruence at: https://brainly.com/question/18922904

#SPJ4

The numeric value of the perimeter of the square with a side length of 12.0 m is 48.0 m. A square is a four-sided polygon where each side has the same length. It is an important geometry shape and finds its application in a variety of mathematical concepts.

Given that, Length of one side of a square is 12.0 m

Perimeter of a square is given by the formula:

Perimeter of a square = 4 × Side

Length: Putting the value of side length as 12.0 m, Perimeter of the square = 4 × 12.0 m= 48.0 m

Therefore, the numeric value of the perimeter of the square with a side length of 12.0 m is 48.0 m. A square is a four-sided polygon where each side has the same length. It is an important geometry shape and finds its application in a variety of mathematical concepts. The perimeter of a square is the total distance around it, which is equal to the sum of all its sides. In order to calculate the perimeter of a square, we need to know the length of its sides. Once we know the length of one side of the square, we can easily calculate the perimeter by multiplying it by 4. In this question, the length of one side of the square is given to be 12.0 m. So, the perimeter of the square can be calculated by using the formula P = 4S, where P is the perimeter of the square and S is the length of one side of the square. By substituting the given values, we get P = 4 × 12.0 m = 48.0 m. Therefore, the perimeter of the square with a side length of 12.0 m is 48.0 m.

To know more about geometry visit: https://brainly.com/question/16836548

#SPJ11