Consider the reaction between solid C and O2 gas which makes CO2;
C+02 -> CO2
If we have a 14 L container of O2 gas at a pressure of 3.0 atm and a temperature of 298 K and we add 36 g of solid C to the
container, then how many grams of CO2 will be produced by this reaction?

Answer:

The equation: (NH₄)₂SO₄ = 2NH4(+) + SO4(-2)

The number of moles = 5 g / 132.14 g/mol = 0.038 mol

The number of molecules = 0.038 X 6.022x10^23 = 2.29x10^23

the number of positive ions present in the ammonium sulphate solution:

2 positive ions for every 1 molecule of (NH₄)₂SO₄

so 2 x 2.29x10^23 = 4.58x10^23

the number of negative ions present in the ammonium sulphate solution

1 negative ion for every 1 molecule of (NH₄)₂SO₄

so 1 x 2.29x10^23 = 2.29x10^23

the total number of ions present in the ammonium sulphate solution​

4.58x10^23 + 2.29x10^23 = 6.87x10^23

Answer:

Explanation:

55

Answer:

A. Mass of KMnO₄ = 316.08 g

B. Mass of KMnO₄ = 41.49 g

C. Mass of KMnO₄ = 0.13 g.

Explanation:

A. Determination of the mass of KMnO₄

We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:

Volume = 1 L

Molarity = 2 M

Mole of KMnO₄ =?

Mole = Molarity × Volume

Mole of KMnO₄ = 2 × 1

Mole of KMnO₄ = 2 moles

Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:

Mole of KMnO₄ = 2 moles

Molar mass of KMnO₄ = 158.04 g/mole

Mass of KMnO₄ =?

Mass = mole × molar mass

Mass of KMnO₄ = 2 × 158.04

Mass of KMnO₄ = 316.08 g

B. Determination of the mass of KMnO₄

We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:

Volume = 350 mL = 350/1000 = 0.35 L

Molarity = 0.75 M

Mole of KMnO₄ =?

Mole = Molarity × Volume

Mole of KMnO₄ = 0.75 × 0.35

Mole of KMnO₄ = 0.2625 mole

Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:

Mole of KMnO₄ = 0.2625 mole

Molar mass of KMnO₄ = 158.04 g/mole

Mass of KMnO₄ =?

Mass = mole × molar mass

Mass of KMnO₄ = 0.2625 × 158.04

Mass of KMnO₄ = 41.49 g

C. Determination of the mass of KMnO₄

We'll begin by determining the number of mole of KMnO₄ in the solution. This can be obtained as follow:

Volume = 80 mL = 80/1000 = 0.08 L

Molarity = 0.01 M

Mole of KMnO₄ =?

Mole = Molarity × Volume

Mole of KMnO₄ = 0.01 × 0.08

Mole of KMnO₄ = 0.0008 mole

Finally, we shall determine the mass of KMnO₄. This can be obtained as follow:

Mole of KMnO₄ = 0.0008 mole

Molar mass of KMnO₄ = 158.04 g/mole

Mass of KMnO₄ =?

Mass = mole × molar mass

Mass of KMnO₄ = 0.0008 × 158.04

Mass of KMnO₄ = 0.13 g

Answer:

sending heat waves and vibrations

[tex]P_{1} = \text{2.50 atm}[/tex]

[tex]T_{1} = 15^{\circ}\text{C + 273 = 288 K}[/tex]

[tex]V_{1} = \text{4.5 L}[/tex]

[tex]P_{2} = \text{0.85 atm}[/tex]

[tex]V_{2} = \text{2.5 L}[/tex]

[tex]T_{2}[/tex]

[tex]\dfrac{P_{1}V_{1}}{T_{1}} = \dfrac{P_{2}V_{2}}{T_{2}}[/tex]

[tex]T_{2} = T_{1} \times \dfrac{P_{2}}{P_{1}} \times \dfrac{V_{2}}{V_{1}}[/tex]

[tex]T_{2} = \text{288 K} \times \dfrac{\text{0.85 atm}}{\text{2.50 atm}} \times \dfrac{\text{2.5 L}}{\text{4.5 L}}[/tex]

[tex]\boxed{T_{2} = \text{54.4 K}}[/tex]

[tex]\\[/tex]

#ILoveChemistry

#ILoveYouShaina

Answer:

C2H4I2

Explanation:

Viscosity of a fluid has to do with the internal friction between the internal layers of the fluid.

Molecular weight is found to be related to the viscosity of a fluid even though the relationship may not be strictly linear.

However, the greater the molecular weight of a substance, the greater the viscosity of the material.

Since C2H4I2 has the greatest molecular weight (281.86 g/mol), it is also expected to display the greatest viscosity among all the compounds listed in the question.

Answer:

7505.19 J

Explanation:

We'll begin by calculating the change in the temperature of copper. This can be obtained as follow:

Initial temperature (T₁) = 20 °C

Final temperature (T₂) = 875 °C

Change in temperature (ΔT) =?

ΔT = T₂ – T₁

ΔT = 875 – 20

ΔT = 855 °C

Finally, we shall determine the heat required. This can be obtained as follow:

Specific heat capacity (C) = 0.385 J/gºC

Change in temperature (ΔT) = 855 °C

Mass (M) = 22.8 g

Heat (Q) required =?

Q = MCΔT

Q = 22.8 × 0.385 × 855

Q = 7505.19 J

Thus, 7505.19 J of heat energy is required.

The element nitrogen exists as a gas  and is  obtained from air on a large scale​ by fractional distillation of air.

An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ2

Answer:

40.4 kJ

Explanation:

Step 1: Given data

Step 2: Calculate the moles corresponding to 55.0 g of CO₂

The molar mass of CO₂ is 44.01 g/mol.

n = 55.0 g × 1 mol/44.01 g = 1.25 mol

Step 3: Calculate the heat (Q) required to sublimate 1.25 moles of CO₂

We will use the following expression.

Q = n × ΔH°sub

Q = 1.25 mol × 32.3 kJ/mol = 40.4 kJ

Answer:

Correct answer would be Option 2, Chemical Energy

Hope this helps!

Answer:

The electrons will be added by the hydrogen.

Explanation:

If we fire a single electron towards the hydrogen atom, the hydrogen atoms added the electron to its shell by applying force of attraction and becomes stable as well as non reactive in nature because the hydrogen attains the electronic configuration of helium which is a noble gas and have completed its outermost shell. The proton that is present in the nucleus attracts this electron and compel it to add in the electron.

Answer:

A: Is constant irrespective of mass of the gases

Explanation:

Avagadro's number, denoted by nA, is a number that represents the units in one mole of any substance. The number is 6.02214076 × 10²³ and the units can be atoms, molecules, ions, formula units etc.

That is;

1 mole of a substance = 6.022 × 10²³atoms, molecules, ions, electrons etc.

It is important to note that the Avagyadro's number is constant irrespective of mass of the gases that are involved.

Answer:

d . The volume of the solvent used was less than 5 liters.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to calculate the volume of the stock (initial) solution by using the following equation:

[tex]M_1V_1=M_2V_2[/tex]

Thus, we solve for, V1, which stands for the aforementioned volume of stock solution:

[tex]V_1=\frac{M_2V_2}{M_1}[/tex]

Then, we plug in to obtain:

[tex]V_1=\frac{5L*1M}{10M}\\\\V_1=0.5L[/tex]

Now, since the final volume was 5 L, we can infer that the volume of solvent is 4.5 L and that of the stock solution 0.5 L for a total of 5 L of diluted solution; therefore, the correct reasoning is d . The volume of the solvent used was less than 5 liters.

Regards!

Answer:

The volume of the solvent is less than 5

Explanation:

Answer:

7.16 × 10⁻³ M

Explanation:

Let's consider the reduction reaction of copper during the electroplating.

Cu²⁺(aq) + 2 e⁻ ⇒ Cu(s)

We can calculate the moles of Cu²⁺ present in the solution using the following relations.

The moles of Cu²⁺ reduced are:

[tex]2.30 min \times \frac{60s}{1min} \times \frac{3.00C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molCu^{2+} }{2mole^{-} } = 2.15 \times 10^{-3} molCu^{2+}[/tex]

[tex]2.15 \times 10^{-3} moles[/tex] of Cu²⁺ are in 0.300 L of solution.

[Cu²⁺] = 2.15 × 10⁻³ mol/0.300 L = 7.16 × 10⁻³ M

Answer:

The three freezing points will all be slightly different. It is given that a water solution has a freezing point of zero degrees Celsius, so water would have a freezing temperature below that. Salt will lower the freezing point, the more that is added.

Explanation:

Answer:

D. length × width

Explanation:

eg. 30 cm(length) × 20cm(width) = 600cm²

Answer:

The correct answer is - d. hydrogen bonding.

Explanation:

Water has strong hydrogen bonds between its molecules that require a very high amount of energy in order to break. Water molecules are joined together or bound with a strong intermolecular force called hydrogen bonds.

These bonds require more kinetic energy which means more temperature or heat in order to break the bonds and turn into steam and this is the reason it has a high boiling point.

Answer:

A

Explanation:

frequency is the product of time and wave length

Answer:

(B) 0.2Hz

Explanation:

took the test and it for sure was not 2.0Hz

my answer

Explanation:

Answer. Filtration is the method of separating a solid from a liquid. A sieve sets a threshold calibration through which all undersized materials pass through. Filtration differs from sieving, where separation occurs at a single perforated layer (a sieve).

Answer:

d. 4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Explanation:

Aluminum metal reacts with oxygen gas in a combination reaction that forms a product that coats the metal preventing it from further oxidation: aluminum oxide. Aluminum is a cation with charge 3+ (Al³⁻) and oxide is an anion with charge 2- (O²⁻). Thus, the neutral compound aluminum oxide has the chemical formula Al₂O₃. The unbalanced chemical equation is:

Al(s) + O₂(g) → Al₂O₃(s)

We can balance using the trial and error method. First, we will balance O atoms by multiplying Al₂O₃ by 2 and O₂ by 3.

Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Finally, we get the balanced equation by multiplying Al by 4.

4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

Answer:

The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.

Explanation:

Buffer capacity is defined as the moles of an acid or base that are needed to change the pH of a buffer in 1 unit.

A more concentrated solution of acetic buffer contains more moles of the acid per liter of solution. A solution that contains more moles of the acetic ion or the acetic acid requires more moles of base or acid to change the pH, that means:

The more concentrated acetic acid buffer has a better buffer capacity because requires more moles of acid or base to change the pH than a more diluted acetic acid buffer.

Answer:

36704 $

Explanation:

First we calculate how much the worker gets paid in one week:

Then we calculate how many weeks does the worker work in 1.7 years:

Finally we calculate how much does the worker make in 1.7 years:

Answer:

False. Intermolecular forces of attraction are important in holding large molecules together.

Explanation:

Within a molecule, atoms are held together by intramolecular forces. That is, intramolecular forces are the attractive forces that hold the atoms or ions that make up chemical substances (elements and compounds) together, forming a chemical bond.

On the other hand, intermolecular forces are those that act on different molecules or ions and that make them attract or repel each other. In other words, intermolecular forces are those that occur between the different molecules of a compound, and cause these molecules or ions to attract or repel each other.

So, intermolecular forces of attraction are important in holding large molecules together.

Answer:

180 amu

C₆H₁₂O₆

Explanation:

Step 1: Determine the molecular mass of the compound

The sample has a mass (m) of 3.06 g and it contains (n) 0.0170 moles. The molar mass M is:

M = m/n = 3.06/0.0170 mol = 180 g/mol

Then, the molecular mass is 180 amu.

Step 2: Determine the molar mass of the empirical formula.

M(CH₂O) = 1 × M(C) + 2 × M(H) + 1 × M(O)

M(CH₂O) = 1 × 12 g/mol + 2 × 1 g/mol + 1 × 16 g/mol = 30 g/mol

Step 3: Determine the molecular formula

First, we will determine "n" according to the following expression.

n = molar mass molecular formula / molar mass empirical formula

n = 180 g/mol / 30 g/mol = 6

The molecular formula is:

n × CH₂O = 6 × CH₂O = C₆H₁₂O₆

Answer:

drought

Explanation:

droughts are long periods without water

Answer:

See explanation and image attached

Explanation:

The image attached shows the entire scheme of reactions mentioned in the question.

The first reaction is an addition reaction which yields a tertiary alkyl halide as shown in accordance with Markovnikov rule.

The second reaction is a dehydrohalogenation in which the base abstracts a proton from the alkyl halide followed by loss of a bromide ion to yield the corresponding alkene.

This alkene is an isomer of the starting material.