Answer:
Supply will increase today.
Explanation:
Supply will increase today because the producer's primary motive is to earn profit so when the price decreases then the profit also decreases. Therefore, when the future expected price is going to fall then the producer will try to earn more profit by selling at a higher price so the current supply will increase for the fiction book.
Bramble Corp.’s cost of goods sold is $280000 variable and $170000 fixed. The company’s selling and administrative expenses are $160000 variable and $220000 fixed. If the company’s sales is $1080000, what is its net income?
Answer:
the net income is $250,000
Explanation:
The computation of the net income is given below:
= Sales - variable cost of goods sold - fixed cost of goods sold - variable selling & admin expense - fixed selling & admin expense
= $1,080,000 - $280,000 - $170,000 - $160,000 - $220,000
= $250,000
Hence, the net income is $250,000
The above formula should be applied for the same
A company's overhead rate is 60% of direct labor cost. Using the following incomplete accounts, determine the cost of direct materials used.
Goods in process inventory:
Beginning balance $100,800
D.M.
D.L.
O.H. F.G.
Ending balance $131,040
Answer: $113,120
Explanation:
Direct material used = Total cost of manufacturing - Direct labor - Factory overhead
Total cost of manufacturing = Ending WIP + Cost of manufacturing - Beginning WIP
= 131,040 + 324,800 - 100,800
= $355,040
Direct labor = Factory overhead * 100/60
= 90,720 * 100/60
= $151,200
Direct materials used = 355,040 - 151,200 - 90,720
= $113,120
Ultimo Co. operates three production departments as profit centers. The following information is available for its most recent year. Which department has the greatest departmental contribution to overhead (in dollars) and what is the amount contributed
Answer: Department 3 had the greatest contribution to overhead of $362,000
Explanation:
Contribution to overhead = Sales - Cost of Goods sold - Direct expense
Department 1:
= 1,140,000 - 714,000 - 114,000
= $312,000
Department 2:
= 540,000 - 164,000 - 54,000
= $322,000
Department 3:
= 840,000 - 314,000 - 164,000
= $362,000
Materials Variances Krumple Inc. produces aluminum cans. Production of 12-ounce cans has a standard unit quantity of 4.5 ounces of aluminum per can. During the month of April, 300,000 cans were produced using 1,240,000 ounces of aluminum. The actual cost of aluminum was $0.18 per ounce and the standard price was $0.08 per ounce. There are no beginning or ending inventories of aluminum. Required: Calculate the materials price and usage variances using the columnar and formula approaches. Enter amounts as positive numbers and select Favorable or Unfavorable. Materials Price Variance$fill in the blank 1 Material Usage Variance$fill in the blank 3
Solution :
Variance Calculations Result
Direct material 0.08(300,000 x 4.5 - 1,240,000) 8,800 favorable
usage variance
Direct material 1,240,000 x (0.08 - 0.18) 124,000 unfavorable
price variance
The standard quantity = actual production x standard quantity per unit
= 300,000 x 4.5
= 1,350,000
Vincent corporation has 100,00 shares of 100 par common stock outstanding. on june30 ,Vincent corporation declared a 5% stock dividend to be issued on July 30 to stockholders of record july15. the market price of the stock was $132 a share on June 30. journalize the entries required on June 30 and july30
The common stock that is seen here would be $500000
What is the common stock outstanding?This is the term that would simply be used to refer to all of the shares that the shareholders of a company as well as the people that are the insiders in the company would own.
How to solve for the journal entriesThe retained earnings is given as
$132 * 0.05
= $6.6
= 6.6 x 100000
= 660000
The debit is $660000
The credit is 100000 x 5 = 500000
paid in capital in excess of par = 660000 - 500000
= $160000
The stock dividend distributable = $500000
common stock is given as $500000
Read more on the common stock outstanding
https://brainly.com/question/17191357
#SPJ1
Question 18
What would be the best appraisal approach to use in estimating the market value of an athletic stadium?
a) Sales comparison
b) Cost
c) Direct capitalization
d) Yield capitalization
Answer:
It's option B. cost
I recently learned about it in my marketing course.
Assume the government has a balanced budget and that the economy is experiencing a period of growth higher than predicted. The tax revenue collected by the government is likely to ________, which would lead to a ________.
The tax revenue that is collected by the government is likely to increase which would then lead to a budget surplus.
A budget reveals the expenditure and the revenue of the government for a particular fiscal year.
Since there is a balanced budget such that the revenue and the expenses for the given year is thesame, then due to the higher growth, there'll be an increase in the tax revenue.
The increase in tax revenue will then lead to a situation whereby the revenue is more than the expenditure, therefore this will lead to a budget surplus.
Read more on:
https://brainly.com/question/17198039
Variable costs as a percentage of sales for Lemon Inc. are 71%, current sales are $551,000, and fixed costs are $207,000. How much will operating income change if sales increase by $37,600? a.$10,904 increase b.$26,696 decrease c.$26,696 increase d.$10,904 decrease
Answer: a.$10,904 increase
Explanation:
Operating income before sales increase:
= Sales - Variable costs - Fixed costs
= 551,000 - (71% * 551,000) - 207,000
= -$47,210
Operating income after sales increase:
Sales increases to:
= 551,000 + 37,600
= $588,600
= 588,600 - (71% * 588,600) - 207,000
= -$36,306
Difference:
= -47,210 - (-36,306)
= Increase of $10,904
Pick the correct statement from below. Multiple Choice Project analysis should only include the cash flows that affect the income statement. A project can create a positive operating cash flow without affecting sales. The depreciation tax shield creates a cash outflow for a project. Interest expense should always be included when analyzing cost-cutting projects. A bid price maximizes profits on a project for the bidding firm.
Answer:
A project can create a positive operating cash flow without affecting sales.
Explanation:
A project cash flow analysis permits to look the cash inflows and cash outflows that are along with the existing or upcoming project. Also it addressed the opportunity cost
So as per the given situation, it involved that project in which it establish the positive operating cash flow without impacting the sales
Therefore as per the given options, the above statement represent an answer
Various financial data for the past two years follow. LAST YEAR THIS YEAR Output: Sales $ 200,200 $ 202,000 Input: Labor 30,005 40,005 Raw materials 34,500 44,500 Energy 5,000 6,100 Capital 48,990 48,990 Other 2,000 3,005 a. Calculate the total productivity measure for this company for both years.
Answer:
The total productivity measures for this company for both years are:
LAST YEAR THIS YEAR
Total productivity 1.66 1.42
Explanation:
a) Data and Calculations:
LAST YEAR THIS YEAR
Output: Sales $ 200,200 $ 202,000
Input: Labor 30,005 40,005
Raw materials 34,500 44,500
Energy 5,000 6,100
Capital 48,990 48,990
Other 2,000 3,000
Total input 120,495 142,595
Total productivity = Output/Input
= $ 200,200/120,495 $ 202,000/142,595
= 1.66 1.42
On Friday of each week, Prawn Company pays its factory personnel weekly wages amounting to $55,000 for a five-day work week.
Required:
a. Prepare the necessary adjusting entry at year end, assuming December 31 falls on Wednesday.
b. Prepare the journal entry for payment of the week’s wages on the payday which is Friday, January 2 of the next year.
Answer and Explanation:
The journal entry is shown below:
a.
Wages Expense $33,000 ($55,000 ÷ 5 days ×3days)
To Wages Payable $33,000
(being wages expense is recorded)
Here wages expense is debited as it increased the assets and credited the wages payable as it also increased the liabilities
b. Wages Expenses $22000
Wages Payable $33000
To Bank $55,000
(Being payment is recorded)
Here wages expense is debited as it increased the assets, the wages payable is also debited as it decreased the liabilities and credited the bank as it decreased the assets
In his work Divine Comedy, the 14-century Italian poet Dante described a trip into space. As he traveled away from Earth, he visited the following celestial bodies in order: the moon, Mercury, Venus, the sun, Jupiter, and Saturn. What view of solar system structure did Dante hold? How do you know? Compare this view with a modern understanding of the solar system’s structure.
According to Italian poet Dante;
Dante believed in a geocentric conception of the planetary system, wherein the Earth seems to be at the centre while the moon, sun, and other planets revolve around it.
Explanation:
Researchers understand Dante had a geocentric perspective of the solar system since he would have visited Venus earlier Mercury in a sun-centered worldview.According to Dante's interpretation of the solar system, the crescent, sun, and planet all revolve around Earth. According to current thinking, only the moon revolves Earth; the Earth and then all the planets remain in orbit of sun.Learn more:
https://brainly.com/question/23288233?referrer=searchResults
The ultimate goal of contract damages is: Multiple Choice Put the nonbreaching party where it was before the contract was formed. Return any costs incurred by the nonbreaching party. Put the nonbreaching party where it was prior to breach. Put the nonbreaching party in the best position possible. Give the nonbreaching party the benefit of its bargain.
Answer:
Give the nonbreaching party the benefit of its bargain.
Explanation:
A contract can be defined as an agreement between two or more parties (group of people) which gives rise to a mutual legal obligation or enforceable by law.
There are different types of contract in business and these includes: fixed-price contract, cost-plus contract, bilateral contract, implies contract, unilateral contract, adhesion contract, unconscionable contract, option contract, express contract, executory contract, etc.
Mutual assent is a legal term which represents an agreement by both parties to a contract. When two parties to a contract both have an understanding of the parameters, terms and conditions surrounding a contract, it ultimately implies that they are in agreement; this is generally referred to as mutual assent.
In contract law, damages can be defined as an amount of money that is paid to a claimant (innocent party) as a compensation for a breach of contractual agreement and it's based on the amount of interest he or she has vested in the contract. Thus, it covers the incurred by the nonbreaching party (claimant or innocent party) due to a breach of contract by the other party.
Hence, the ultimate goal of contract damages is to give the nonbreaching party the benefit of its bargain.
Show what happens to the firm's output choice and profit if the price of the product falls from $52 to $42. If the market price falls from $52 to $42, then the firm's output will decrease or increase from _____units to _____ units. (Enter your responses using integers.)
Answer: The firm's output will therefore decrease from 9 units to 8 units.
Explanation:
This firm most likely operates in a competitive market where price is the same as marginal revenue.
In such a market, firms will try to maximize output by selling at a level where Price is equal to Marginal cost and if they cannot get here, they try to make them as close as possible so long as marginal cost does not exceed price.
As this is the case, when the price was $52, the closest Marginal cost that isn't higher than price was $45 for an output level of 9 units.
If the product falls to $42, the closest marginal cost that isn't higher than the cost is $38 for 8 units.
The firm's output will therefore decrease from 9 units to 8 units.
Colorado Cleaning has a 5-year maximum acceptable payback period. The firm is considering the purchase of a new washing machine and must choose between two alternative ones. The first machine requires an initial investment of $25,000 and generates annual after-tax cash inflows of $6,500 for each of the next 8 years. The second machine requires an initial investment of $75,000 and provides an annual cash inflow after taxes of $9,500 for 15 years.
Required:
a. Determine the payback period for each machine.
b. Comment on the acceptability of the machines, assuming that they are independent projects.
c. Which machine should the firm accept? Why?
d. Do the machines in this problem illustrate any of the weaknesses of using payback? Discuss.
Answer:
a) Payback period = period up to which cumulative cash flow is negative +
(negative cumulative cash flow /cash flow succeeding
the above period)
Project A - Up to year 4 ,cash flow recovered = 3000 * 4 = 12,000
Payback period =14,000/3,000 = 4.67 years
Project B= Cash flow recovered up to year 5 = 4000 * 5 = 20000
Payback period = 21,000/4,000 =5.25 years
b) On the basis of the Payback period, Project A should be selected, as it has a lower payback period and is also within the maximum acceptable payback period. back period.(4.67 < 5)
Project B should not be selected as its payback recovery is not within the maximum acceptable payback period (5.25 >5 )
c) Machine A should be selected as it has a lower payback period. than machine B.
d)The payback period ignores the life present value of cash flow and also the life of the machine each project has.
so the decision on the basis of the payback period may not be accurate.
A trust has been established to fund scholarships in perpetuity. The next annual distribution will be $1,200, and future payments will increase by 3 percent per year. What is the value of this trust at a discount rate of 7.4 percent
Answer:
PV= $27,272.73
Explanation:
Giving the following information:
Annual distribution (Cf)= $1,200
Interest rate (i)= 7.4% = 0.074
Growth rate (g)= 3% = 0.03
To calculate the present value (PV) of the fund, we need to use the following formula:
PV= Cf / (i - g)
PV= 1,200 / (0.074 - 0.03)
PV= $27,272.73
JacksonIndustries produces two products. The products' estimated costs are as follows:
Product A Product B
Direct Materials $20,000 $15,000
Direct Labor $30,000 $10,000
The company's overhead costs of $200,000 are allocated based on labor cost. Assume 4,000 units of product A and 5,000 units of Product B are produced. What is the total amount of production costs that would be assigned to Product A? (Do not round intermediate calculations.)
a. $200,000
b. $75,000
c. $50,000
d .$150,000
e. $114,285.71
Answer:
Total production cost= $200,000
Explanation:
First, we need to calculate the predetermined overhead rate:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 200,000 / (30,000 + 10,000)
Predetermined manufacturing overhead rate= $5 per direct labor cost
Now, we can allocate overhead to Product A:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Allocated MOH= 5*30,000
Allocated MOH= $150,000
Finally, the total production cost for Product A:
Total production cost= 150,000 + 20,000 + 30,000
Total production cost= $200,000
Your firm is considering a project with a discount rate of 9%. If you start the projecttoday, your firm will incur an initial cost of $490 and will receive cash inflows of$365 per year for 3 years. If you instead wait one year to start the project, the initial cost will rise to $530 and the cash flows will increase to $405 a year for the following 3 years. Would your firm be better off starting the project now or waiting to start the project in a year? Explain clearly including an estimate of the value of the option to wait.
Answer:
If the company start the project today then NPV of the project,
Year Cash Flow PV of Cash flow
0 -490 -490
1 365 365/1.09= 334.86
2 365 365/1.09^2 = 307.21
3 365 365/1.09^3= 281.85
NPV = 433.92
NPV of Project0= $ 433.92
If a company start a project after one year,
Year Cash Flow PV of Cash flow
0 0 0
1 -530 -530/1.09= -486.24
2 405 405/1.09^2 =340.88
3 405 405/1.09^3 = 312.73
4 405 405/1.09^4 = 286.91
NPV = 454.28
NPV of Project1= $ 454.28
Here for project start after one year has more Net Present Value of cash flow compared to which start now.
So, Starting a project after one year is more profitable.
Last year, you purchased a stock at a price of $64.00 a share. Over the course of the year, you received $2.20 per share in dividends and inflation averaged 2.7 percent. Today, you sold your shares for $69.00 a share. What is your approximate real rate of return on this investment
Answer:
8.55%
Explanation:
Calculation to determine your approximate real rate of return on this investment
First step is to calculate the Nominal return
Nominal return = ($69 - $64+ $2.20)/$64
Nominal return=7.2/$64
Nominal return= 0.1125
Now let calculate the Approximate real return
Approximate real return = 0.1125 - 0.027
Approximate real return= 0.0855*100
Approximate real return=8.55%
Therefore your approximate real rate of return on this investment is 8.55%
Gotiable sells straw hats for $24 each. The April inventory purchases are summarized below. Gotiable sold 142 hats at a hat festival on April 28. Units Cost each Dollars Beg. Inv. 84 3 252 April 2 75 4 300 April 14 66 7 462 April 23 52 8 416
Assume that Gotiable uses the average cost method for inventory costing.
1. What is the average cost of one hat? (Round to the nearest penny (2 decimal points)).
2. What will be the dollar value of the inventory on the April 30th balance Sheet? (Round to the nearest dollar)
3. What will Gotiable report as Gross margin for the hats for the month of April? (Round to the nearest dollar)
Answer and Explanation:
The computation is shown below:
1.
Particulars Units Unit Cost Dollars
Beg. Inv. 84 $3 $252
Apr-02 75 $4 $300
Apr-14 66 $7 $462
Apr-23 52 $8 $416
Total 277 $1,430
Average cost of one hat is
= Total cost of purchases ÷ Units purchased
= $1,430 ÷ 277 units
= $5.16
2.
Ending Inventory in Units = Units purchased - Units sold
= 277 units - 142 units
= 135 units
Now
Value of Ending Inventory = Units in Ending Inventory × Average cost per unit
= 135 units × $5.16
= $696.60
= $697
3
Gross Margin = Units sold × (Selling Price - Cost of goods sold)
= 142 units × ($24 - $5.16)
= $2,675.28
= $2,675
(a) A lamp has two bulbs of a type with an average lifetime of 1800 hours. Assuming that we can model the probability of failure of these bulbs by an exponential density function with mean μ = 1800, find the probability that both of the lamp's bulbs fail within 2000 hours.
(b) Another lamp has just one bulb of the same type as in part (a). If one bulb burns out and is replaced by a bulb of the same type, find the probability that the two bulbs fail within a total of 1000 hours.
Answer:
a) 0.45
b) 0.11
Explanation:
A) P( both bulbs fail within 2000 hours ) = 0.45
Given data:
Average lifetime of bulbs = 1800 hours
mean μ = 1800
b) P( both bulbs fail within 1000 hours ) =
Attached below is a detailed solution of the given question
What is choice ? Choice is problem how
Answer:
Problem of choice refers to the allocation of various scarce resources which have alternative uses that are utilized for the production of various commodities and services in the economy for the satisfaction of unlimited human wants.
Tái chế không phải 1 phương pháp hoàn hảo để giải quyết vấn đề ô nhiễm mt
Answer:
ý thức về việc xả rác, ngưng xả rác , bỏ rác đúng nơi quy định
1. The process of establishing the image or identity of a brand or product so that customers perceive it in a certain way is the definition of which of the following terms?
A. Marketing Strategy,
B. Social Media,
C. Marketing Position,
D. Target market
2. Anton's Coffee positions itself to provide the highest quality and most unique coffee drinks in the area. This is an example of which of the following?
A. Marketing Strategy
B. Social Media
C. Target Market
D. Marketing Postion
Answer:
Answer of your question is Marketing PositionExplanation:
Market positioning refers to the process of establishing the image or identity of a brand or product so that consumers perceive it in a certain way. For example, a car maker may position itself as a luxury status symbol.Thomlin Company forecasts that total overhead for the current year will be $12,300,000 with 150,000 total machine hours. Year to date, the actual overhead is $8,270,500, and the actual machine hours are 97,300 hours. If Thomlin Company uses a predetermined overhead rate based on machine hours for applying overhead, as of this point in time (year to date), the overhead is a.$291,900 overapplied b.$291,900 underapplied c.$158,100 overapplied d.$158,100 underapplied
Answer:
b. $291,900 underapplied
Explanation:
With regards to the above information, we will calculate the predetermined overhead rate first.
Predetermined overhead rate = Estimated total overhead / Total machine hours
= $12,300,000 / 150,000
= $82 per machine hours
Total overhead = Predetermined overhead rate × Actual total machine hours
= $82 × 97,300
= $9,798,600
Then,
Overhead = Total overhead - Actual overhead
= $9,798,600 - $8,270,500
= $291,900 underapplied
______ occur whenever a third party receives or bears costs arising from an economic transaction in which the individual (or group) is not a direct participant.
a. Pecuniary benefits and costs
b. Externalities
c. Intangibles
d. Monopoly costs and benefits
The choose b. Externalities
Externalities occur whenever a third party receives or bears costs arising from an economic transaction in which the individual (or group) is not a direct participant.
I hope I helped you^_^
Huffman Corporation constructed a building at a cost of $30,000,000. Weighted-average accumulated expenditures (WAAE) were $12,000,000, actual interest was $1,200,000, and avoidable interest was $1,600,000. If the salvage value is $2,400,000, and the useful life is 40 years, depreciation expense for the first full year using the straight-line method is
a. $690,000
b. $705,000.
c. $720,000.
d. $735,000.
Answer:
$730,000
Explanation:
Calculation to determine what depreciation expense for the first full year using the straight-line method is
Using this formula
Depreciation expense=Costs of Building+Avoidable interest-Salvage value)/Useful life
Let plug in the formula
Depreciation expense=( $30,000,000 + $ 1,600,000- $2,400,000) / 40 years
Depreciation expense=$29,200,000/40 years
Depreciation expense= $730,000
Therefore depreciation expense for the first full year using the straight-line method is $730,000
You are considering investing in the stock of PartyWagon, Inc. You expect a dividend of $1.25 next year, $1.31 in year 2, and $1.38 in year 3. At the end of three years, you expect to be able to sell the stock for $65. If you can purchase the stock for $32, what rate of return do you expect to earn
Answer: 29.93%
Explanation:
You can use Excel to solve for this.
Bear in mind that when given a series of cashflows, the expected return is the Internal Rate of Return (IRR).
Initial investment = $32
First cashflow = $1.25
Second cashflow = $1.31
Third cashflow = $1.38 + $65 selling price = $66.38
IRR = 29.93%
On July 1, 2022, Cullumber Company sells equipment for $146000. The equipment originally cost $480000, had an estimated 5-year life and an expected salvage value of $50000. The Accumulated Depreciation account had a balance of $301000 on January 1, 2022, using the straight-line method. The gain or loss on disposal is
Answer:
Accumulated depreciation = ($480,000 - $50,000)/5 *6/12 + $301,000
Accumulated depreciation = $43,000 + $301,000
Accumulated depreciation = $344,000
Date Account titles & Explanations Debit Credit
Cash $146,000
Accumulated depreciation $344,000
Gain on disposal $10,000
Equipment $480,000
So, the gain on disposal is $10,000
Explain the manufacturing flow management process and the relationship among manufacturers' production capabilities and costs, suppliers, shippers, and demand for goods. Briefly define and explain the differences between lean and agile supply chain strategies.
Answer:
The difference between lean and agile is the fluidity with the response to the market. A lean supply chain focuses on cutting costs by producing high volumes of products with low variability. An agile supply chain focuses on responding to the market demand with smaller, customizable batches of items.
A lean supply chain prioritizes cost reduction by producing goods in large quantities and with little variation. An agile supply chain focuses on producing things in smaller, more individualized quantities in response to market demand.
What is a supply chain?The entire process from when a consumer places an order to when the goods or service is delivered and paid for is known as the supply chain. The value and supply chains are coordinated and optimized by the supply chain manager.
He is in charge of ensuring the flawless operation of every process, from the acquisition of raw materials to production, logistics, and client delivery.
As a result, the company, its customers, and its customers' customers are all included in the supply chain. A supply network accounts for the possibility that one of the providers is also a supplier to a customer or even the final consumer.
The monitoring of all resources, data, and finances used in the production process, from the supplier to the manufacturer to the merchant and consumer, is referred to as supply chain management (SCM) or supply chain management.
Learn more about supply chain, here
https://brainly.com/question/29318233
#SPJ5
