Consider the following silica gel TLC plate of compounds A, B, and C developed in hexanes:
Consider the following silica gel TLC plate of com
a) Determine the R f values of compounds A, B, and C run on a silica gel TLC plate using hexanes as the solvent
b) Which compound, A, B, or C, is the most polar?
c) What would you expect to happen to the R f values if you used acetone instead of hexanes as the eluting solvent? (Think polarity of solvents)

The electron representation shows the electrons in the atoms as dots as in the image attached.

An electron dot representation, also known as a Lewis dot structure or electron dot diagram, is a way of representing the valence electrons of an atom using dots around the symbol of the element.

Valence electrons are the outermost electrons of an atom, and they play an important role in chemical bonding. The electron dot representation shows the valence electrons as dots around the symbol of the element, with each dot representing one valence electron.

Learn more about electron dot:https://brainly.com/question/25929171

#SPJ1

The quaternary structure of hemoglobin is responsible for the increased oxygen-carrying capacity and stability of the molecule. This structure allows hemoglobin to better transport oxygen throughout the body and is essential to life.

The structural change from myoglobin to hemoglobin includes an additional quaternary structure, which is the arrangement of two or more myoglobin subunits into a single, functional entity. This structural change allows for the cooperative binding of oxygen, meaning that the hemoglobin molecule can carry more oxygen than a single myoglobin molecule can. This is due to the increased surface area of the hemoglobin molecule, which provides more oxygen-binding sites. Additionally, the quaternary structure of hemoglobin increases the stability of the molecule, meaning it can better resist changes in pH or temperature. This is important because it allows hemoglobin to function in the wide range of temperatures and environments that are found within the human body.  

To learn more about Hemoglobin :

https://brainly.com/question/11102357

#SPJ11

Answer:

1. Equilibrium expressions:

a. K = [HSO4-][H3O+]/[H2SO4][H2O]

b. K = [NO]^4[H2O]^6/[NH3]^4[O2]^5

c. K = [NH3][HCl]/[NH4Cl]

d. K = [NO2]^2/[N2O4]

2. Since K = 0.050, the concentrations of the reactants (N2 and H2) are larger than the concentrations of the products (NH3).

3. Since K = 6.8 x 10^3, the concentrations of the products (SO2 and O2) are larger than the concentrations of the reactant (SO3).

4. The Ksp expression for each of the reactions is:

a. Ksp = [Na+][Cl-]

b. Ksp = [Ba2+][SO42-]

5. Brønsted-Lowry acids and bases:

a. Acid: HNO3; Conjugate base: NO3-; Base: H2O; Conjugate acid: H3O+

b. Acid: HCN; Conjugate base: CN-; Base: H2O; Conjugate acid: HCN

c. Acid: H2SO4; Conjugate base: HSO4-; Base: Cl-; Conjugate acid: HCl

d. Acid: NH3; Conjugate base: NH2-; Base: H2O; Conjugate acid: NH4+

e. Acid: H2O; Conjugate base: OH-; Base: O2-; Conjugate acid: OH-

6. Conjugate acids and bases:

a. Acid: H2O; Conjugate base: OH-

b. Acid: H3O+; Conjugate base: H2O

c. Acid: H2CO3; Conjugate base: HCO3-

d. Acid: NH4+; Conjugate base: NH3

e. Acid: HSO4-; Conjugate base: SO42-

7. The strongest acid is HIO4 (highest K value), followed by HCN, HC2H3O2, and H2CO3 (lowest K value). The K values represent the degree to which the acids dissociate in solution. HIO4 is a strong acid, meaning it dissociates almost completely in solution, while H2CO3 is a weak acid, meaning it only dissociates partially.

8. pH and pOH calculations:

a. pH = -log[H3O+] = -log(0.200) = 0.699; pOH = -log[OH-] = -log(1.0 x 10^-14/0.200) = 12.301

b. pOH = -log[OH-] = -log(0.0143) = 1.844; pH = 14.000 - pOH = 12.156

c. pH = -log[H3O+] = -log(3.0) = 0.522; pOH = 13.478

d. pOH = -log[OH-] = -log(0.0062) = 2.206; pH = 14.000 - pOH = 11.794

9. Hydronium and hydroxide ion concentrations:

pH = 3.6; hydronium ion concentration = 10^-pH = 3.98 x 10^-4 M; hydro

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

No. According to solubility rule, we cannot use the Fe(NO3)3 rather than AgNO3 via analysis of precipitate of AgCl because no precipitate of cl- ion formed in Fe(NO3)3 .

A solubility chart having solubility rules is defined as a chart describing for different combinations of cations and anions whether the ionic compounds formed dissolve in or precipitate from a solution. This chart shows the solubility of various common ionic compounds in water, at a pressure of 1 atm. and under room temperature.

The following reactions are involved to determine Cl- concentration,

Case 1:  Fe(NO3)3 (aq.) + Cl-(aq.)   ----> FeCl3(aq.) + NO3-(aq.).

In this reaction involving aqueous solution of Fe(NO3)3 no precipitate of Cl- ion compound is formed .so this we can not use Fe(NO3)3 to determine %Cl- ion in solution.

Case 2 :

AgNO3(aq.) + Cl- (aq.)  ---> AgCl(precipitate) + NO3-.

This reaction involving aqueous solution of AgNO3 can be use to determine %Cl- ion concentration in solution via analysis of precipitate of AgCl .

To learn more about Solubility Rule

https://brainly.com/question/15596863

#SPJ4

The atom with the lowest first ionization energy is C (carbon). The order from highest to lowest is: e) Cl (chlorine) > d) P (phosphorus) > c) Ge (germanium) > b) C (carbon) > a) Ca (calcium).

The atom that would have the lowest first ionization energy is Ca (Calcium). The amount of energy that is required to remove the most loosely held electron from an isolated neutral gaseous atom to form a cation is called the first ionization energy. It is a measure of the stability of an atom. The ionization energy of an element is determined by the amount of energy required to remove an electron from its ground state. The ionization energy is a physical property of an element that varies across the periodic table. The element that has the lowest ionization energy is the most reactive and will most likely form cations.

Identify which of the following atoms would have the lowest first ionization energy. The given atoms are Ca, C, Ge, P, and Cl. Out of these atoms, Ca would have the lowest first ionization energy. The electronic configuration of Ca is 2, 8, 8, 2. Calcium belongs to group 2 and period 4 of the periodic table. It has 20 protons, 20 electrons, and 2 valence electrons. Because of its 2 valence electrons, it has a low ionization energy. The electronic configuration of Ca is most stable because of the presence of the 8 valence electrons in the outermost shell.

The electronic configurations of the other given atoms are:

C: 2, 4Ge: 2, 8, 18, 4P: 2, 8, 5Cl: 2, 8, 7

All of these elements have electrons that are either in the process of filling the valence shell or have already filled it. They have higher ionization energies because of this. Therefore, Ca would have the lowest first ionization energy.

For more such questions on ionization energy , Visit:

https://brainly.com/question/20658080

#SPJ11

Since the electronic configuration of nitrogen is 1s² 2s² 2p³, the number of electrons present in the nitrogen atom is 7, and the atomic number of nitrogen is also seven (7).

The atomic number of an atom is the number of protons in the nucleus of an atom. The number of protons defines the properties of an element. For example, if an element with 5 protons is boron atom.

The electronic configuration of an atom represents the number of electrons in each sub-energy level of the atom in the ground state.

The electronic configuration of nitrogen is 1s²2s²2p³. As you know, the electrons around the nucleus are located in energies or levels. Therefore, from the definition of electron configuration, we can say that the nitrogen atom has 2 electrons in the first energy level K of the s-subshell, and in the s-subshell and the p subshell of the second energy level L, respectively There are 2 or 3 electrons.

Therefore, the total number of electrons in the nitrogen atom is 7 (2 + 2 + 3). We know that the number of protons = the number of electrons, so the number of protons in the nitrogen nucleus is 7. Therefore, the nitrogen atom has an atomic number of 7.

For more information about electronic configuration, visit :

https://brainly.com/question/21977349

#SPJ4

(S)-2-butanol will undergo an SN2 reaction with HBr to produce a racemic mixture of alkyl bromides. Here option B is the correct answer.

When optically active alcohol is treated with HBr, the reaction follows an SN1 or SN2 mechanism. In the case of SN1, a carbocation intermediate is formed, and in SN2, a backside attack by the nucleophile occurs. The stereochemistry of the product depends on the configuration of the intermediate and the direction of attack.

In the case of (S)-2-butanol, the hydroxyl group is attached to the second carbon atom, which makes it a primary alcohol. When treated with HBr, it undergoes an SN2 reaction, where the hydroxyl group is replaced by the bromine atom. The nucleophile attacks from the backside of the molecule, leading to an inversion of configuration.

This results in the formation of a racemic mixture of alkyl bromides, as both enantiomers have an equal chance of being attacked from either side. On the other hand, (R)-2-butanol, being the enantiomer of (S)-2-butanol, will also undergo the same reaction and produce the same racemic mixture of alkyl bromides.

In the case of (R)-1-phenyl ethanol and (S)-1-phenyl ethanol, they are secondary alcohols and can undergo either SN1 or SN2 reactions depending on the reaction conditions. However, the reaction mechanism will lead to the formation of a mixture of diastereomers, rather than a racemic mixture of enantiomers.

To learn more about alkyl bromides

https://brainly.com/question/29031148

#SPJ4

Complete question:

Which of the following optically active alcohols, when treated with HBr, results in a racemic mixture of alkyl bromides?

a) (R)-2-butanol

b) (S)-2-butanol

c) (R)-1-phenyl ethanol

d) (S)-1-phenyl ethanol

The atom with the larger first ionization energy is Titanium. Option a.

The atom with the larger first ionization energy is Tin. Option b.

Ionization is the process of removing one or more electrons from an atom or molecule, resulting in the formation of an ion. This can be achieved through a variety of methods, such as exposure to high-energy radiation or contact with other charged particles.

Ionization energy is the amount of energy required to remove an electron from a neutral atom or molecule, resulting in the formation of a positively charged ion. This energy is typically measured in electron volts (eV) or kilojoules per mole (kJ/mol), and varies depending on the identity of the atom or molecule and the electronic configuration of its valence shell. Ionization energy is an important property of atoms and molecules, as it can provide insight into their reactivity and chemical behavior.

Learn more on ionization energy here https://brainly.com/question/20658080

#SPJ1

Answer:

1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol

Explanation:

HOPE THAT HELPS ! <3

Explanation: the resistance that one surface or object encounters when moving over another.

or

the action of one surface or object rubbing against another.

Answer: a force that resists the motion of one object against another

Answer:

radiation is the answer

The major organic product of an SN2 substitution reaction is an alkene, which may be either in retention or inversion of configuration relative to the original substrate.

The reaction you are asking about is an SN2 substitution reaction, in which a nucleophile (Nu) displaces a leaving group (LG) from a molecule with an alkyl halide substrate. The major organic product of this reaction will be an alkene, which has the same carbon chain as the alkyl halide substrate. Depending on the relative configuration of the substrate, the alkene product may be the same as the original substrate (retention) or have its configuration inverted (inversion). If stereochemistry is relevant to the question, then it should be specified in the answer.

To learn more about SN2 substitution :

https://brainly.com/question/29849583

#SPJ11

The  atoms of lithium that  are in 18.7 g is 16 × 10²³ atoms . This is taken out by mole concept .

The mole is a unit of measurement similar to the pair, dozen, gross, and so on. It provides a precise count of the atoms or molecules in a bulk sample of matter. A mole is the amount of substance that contains the same number of discrete entities (atoms, molecules, ions, etc.)

if 7 grams of lithium contain 6 × 10²³ atoms

then 18.7 will contain 16 × 10²³ atoms

to know more about mole concept , visit ;

brainly.com/question/31123980

#SPJ1

Answer:

See below.

Explanation:

The atomic number of lead (Pb) is 82, which means it has 82 electrons. The electronic configuration of lead is

1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p²

The orbital diagram for the valence electrons of lead (Pb) is

↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓

s s p p p p d d

2 1 6 2 6 2 10 10

|||||||||

1 2 3 4 5 6 7 8

The notation ↑↓ represents a pair of electrons with opposite spins.

To determine if lead (Pb) is diamagnetic or paramagnetic, we need to look at whether there are any unpaired electrons. Based on the orbital diagram, we can see that all the electrons in the valence shell are paired, meaning that lead (Pb) is diamagnetic.

Answer:

Transcribed Image Text: Rank the following substances in order of increasing acid strength. (1 as least and 4 as most in acid strength) ✓ H₂Se ✓ HBr HI ✓ AsH3 Expert Solution

Explanation:

HOPE IT HELPS!!

The element in question here is E, and its chemical formula with oxygen is EO2.  the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Electronic configuration refers to the distribution of electrons among different energy levels and subshells of an atom. When E forms a compound with oxygen, it loses two electrons to form a cation with a 2+ charge. This cation is written as E2+ and has an electronic configuration of 1s²2s²2p⁶. The electronic configuration of E before it forms a compound with oxygen can be found by considering its position in the periodic table. E is in the third row and fourth column of the periodic table, which means that it has three energy levels and four valence electrons.

Therefore, its electronic configuration is 1s²2s²2p⁶3s²3p². When E forms a compound with oxygen, it loses two valence electrons from its outermost energy level, which is the third energy level in this case. This results in the formation of E2+ ions with an electronic configuration of 1s²2s²2p⁶. Thus, the electronic configuration of the ion formed from E in EO2 is 1s²2s²2p⁶.

Know more about electronic configuration here:

https://brainly.com/question/29564763

#SPJ11

At has a higher initial ionisation energy than Br, while Br has a bigger atomic radius. Se has a bigger atomic radius than Br, and Br has a higher initial ionisation energy than Se.

The most loosely bound electron is further from the nucleus and thus easier to remove in bigger atoms. Hence, the ionisation energy should decrease as size (atomic radius) increases.

This is because the outer electrons aren't bound as strongly because they are farther from the nucleus.

To know more about ionisation energy visit:-

brainly.com/question/27356170

#SPJ1

The alkene that is most stabilized through hyperconjugation is 2-methylpropene. The correct option is (C).

Hyperconjugation is a type of resonance that involves the overlapping of an unshared electron pair on an atom, like carbon, with an adjacent sigma bond. In this case, the unshared electron pair on the methyl group of 2-methylpropene provides stabilization to the adjacent sigma bond, making it the most stabilized alkene through hyperconjugation.

The most stabilized alkene through hyperconjugation can be determined by analyzing the degree of substitution. The greater the number of alkyl groups attached to the carbon atoms of the double bond, the greater the degree of substitution and the greater the stability due to hyperconjugation. Hence, the answer to this question would be option C (2-methylpropene.), as it has the greatest degree of substitution and is thus the most stable through hyperconjugation.

Option A (1-butene) has only one methyl group attached to one carbon of the double bond, making it less stable than option C. Option B (2-butene) has two methyl groups attached to the same carbon atom of the double bond, resulting in a similar degree of substitution to option A. Option D (2-methyl-1-pentene) has a lesser degree of substitution than option C because the methyl group is attached to only one carbon atom of the double bond, while in option C, the methyl group is attached to a tertiary carbon atom.

Hence, option C , 2-methylpropene. is the most stabilized alkene through hyperconjugation because of its greater degree of substitution.

For more such questions on Hyperconjugation , Visit:

https://brainly.com/question/28031100

#SPJ11

The complete question is:

which of the following alkenes is most stabilized through hyperconjugation? select answer from the options below

A 1-butene

B 2-butene

C 2-methylpropene

D 2-methyl-1-pentene

The SI unit of pressure is the Pascal (Pa).

The boiling point of water is lower on Mount McKinley than the boiling point of water in NYC.

What is Pressure?

Pressure is defined as the amount of force applied perpendicular to the surface of an object per unit area over which that force is distributed. In other words, it is the force per unit area that an object exerts on another object. Pressure can be measured in various units such as pascal (Pa), bar, pounds per square inch (psi), and atmospheres (atm), among others. It is an important concept in physics and is used to describe many phenomena, including fluid dynamics, weather patterns, and even the behavior of gases in space.

At lower elevations, atmospheric pressure is higher compared to higher elevations.

Standard atmosphere or standard atmospheric pressure is equal to 101325 Pa.

Learn more about Pressure from given link

https://brainly.com/question/28012687

#SPJ1

Gram-negative bacteria appear as pink/red under the microscope after counterstaining with safranin. In conclusion, the appearance of a gram-negative bacteria cell after the addition of the decolorizing agent (ethyl alcohol) in the Gram stain is colorless.

The appearance of a gram-negative bacteria cell after the addition of the decolorizing agent (ethyl alcohol) in the Gram stain is colorless. Gram staining is a common microbiological method that is used to differentiate bacteria into two categories: Gram-positive and Gram-negative. This differentiation is based on differences in the composition of their cell walls. Gram staining is used to identify bacteria and fungi by staining the samples with crystal violet and iodine, then decolorizing with ethanol and counterstaining with safranin. This method helps to determine the presence or absence of a thick layer of peptidoglycan in the cell wall of bacteria. In Gram-negative bacteria, the decolorizing agent, ethyl alcohol, remove the outer membrane, causing the crystal violet stain to be removed from the cell wall, therefore resulting in a colorless appearance. The alcohol also increases the permeability of the thin peptidoglycan layer, which makes the safranin stain visible in the cell wall of the bacteria.

To learn more about Gram-negative bacteria :

https://brainly.com/question/28985258

#SPJ11

To produce ammonia (NH₃) from thin air, the reactants required are N₂ and H₂. So the correct option is b).

Ammonia is one of the most abundantly produced inorganic chemicals. In 2016, there are a number of large ammonia plants around the world that produced a total of 144 million tons of nitrogen (equivalent to 175 million tons of ammonia). That number will rise to 235 million tonnes of ammonia in 2021. China produced 31.9% of its global production, followed by Russia at 8.7%, India at 7.5% and the United States at 7.1%. More than 80% of the ammonia produced is used as fertilizer for agricultural crops.

Today, most ammonia is produced on a large scale using the Haber process, with capacities of up to 3,300 tons per day. Gases N₂ and H₂ are reacted at a pressure of 200 bar. A typical modern ammonia production plant first converts natural gas, LPG, or petroleum gas into gaseous hydrogen. The process of producing hydrogen from hydrocarbons is known as steam reforming. Hydrogen then combines with nitrogen to produce ammonia by the Haber-Bosch process.

One way to produce green ammonia is to use hydrogen from the electrolysis of water and nitrogen separated from air. These are fed into the Haber Process (aka Haber-Bosch), all of which produce sustainable power.

To know more about Haber process, visit:

https://brainly.com/question/26667299

#SPJ1

Using CH3NH2 and CH3NH3Cl, one may simulate the blood's buffering properties. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer system.

Carbonic acid and sodium bicarbonate. Hint: Human blood has a buffer of bicarbonate anion (HCO3) and carbonic acid (H2CO3) to keep the blood's pH between 7.35 and 7.45. Blood pH values higher or lower than 7.8 or 6.8 can be fatal.

Bicarbonate anion and hydronium are in equilibrium with carbonic acid in this buffer. A weak acid and its conjugate base, or a weak base and its conjugate acid, make up a buffer.

To know more about acid visit:-

brainly.com/question/28175742

#SPJ1

Answer:

CH3NH2 and CH3NH3Cl

Explanation:

Methylamine (CH3NH2) is an organic base. In order to produce a basic buffer solution similar to blood, we can combine this base with a soluble salt of its conjugate acid, such as CH3NH3Cl. The solution of KOH and H2O would not be a good buffer because KOH is a strong base. The solution of HF and NaF is a buffer, but the pKa of HF is about 3.2, which is far from the pH of blood, 7.4.

Answer:

Liquid nitrogen can be used to freeze biological tissue. Liquid nitrogen is -210°C which will stop all biological decomposition in the tissue and preserve it.

Explanation:

Burning your mouth on a hot spoon(option D) is an example of heat transfer through conduction, as the spoon is in direct contact with your mouth.

Conduction is the transfer of heat or electrical energy between two objects that are in direct contact with each other, or between two parts of the same object that are at different temperatures.

In conduction, the energy transfer occurs due to the collision of molecules in the objects or materials. When two objects are in contact, the molecules of the warmer object vibrate more rapidly, colliding with the molecules of the cooler object, which have less energy.

These collisions transfer thermal energy from the warmer object to the cooler object, until both objects reach the same temperature.

Learn about conduction here https://brainly.com/question/20493362

#SPJ1

The atomic mass of sulfur trioxide (SO3) is 82 amu.

Sulfur trioxide (SO3) has one sulfur atom and three oxygen atoms.

The atomic mass of sulfur can be calculated by subtracting the total mass of the oxygen atoms in sulfuric acid (3 x 16 amu) from the mass of sulfuric acid (98 amu) and then subtracting the mass of the remaining oxygen atom:

The atomic mass of sulfur is 34 amu.

To find the atomic mass of sulfur trioxide, we add the atomic masses of one sulfur atom and three oxygen atoms:

Therefore, the atomic mass of sulfur trioxide (SO3) is 82 amu.

Learn more about sulfur trioxide here : brainly.com/question/1458186

#SPJ1

The He element is the one that is hardest to ionize.

The correct answer is He.

An object is categorised as an element if it cannot be reduced to a simpler form. It is possible to recognise them by their particular atomic number. The elements are organised into groups in the periodic table based on their atomic numbers, and those having related characteristics are underlined.

An element is any substance made entirely of a certain type of atom, which are the building blocks of all matter. We know that each element is composed of protons, neutrons, and electrons. Some of the tiniest components in all of nature are these.

To know more about Elements visit:

https://brainly.com/question/14347616

#SPJ1

Mn3+, an ion of manganese(III), can function as an acid by giving a proton (H+) to a base. Here's an illustration: Mn3+ (aq) + 3OH- (aq) Mn(OH)3 (s)

There is no need to add an indicator because MnO4's vivid purple colour serves as one enough. In the conical flask, there is Fe2+. The Fe2+ solution is added, and the Fe2+ lowers the MnO4- to Mn2+. As Mn2+ is a colourless solution, the purple colour disappears.

The divalent metal cation manganese(2+) contains manganese as the metal. It plays the part of a cofactor. It consists of a monoatomic dication, a manganese cation, and a divalent metal cation.

To know more about cation visit:-

https://brainly.com/question/28710898

#SPJ1

Typically, you must identify the x- and y-axes, which represent the two variables being measured or compared, in order to label a graph.

The graph's shape must be examined in order to determine the type of relationship between the variables. The relationship is considered to be linear if the graph depicts a straight line. The relationship is non-linear if the graph shows a curve. To determine whether the relationship is positive or negative, you would also need to look at the line's slope and direction. The relationship is positive if the line slopes upwards from left to right; this indicates that as one variable rises, so does the other. The relationship is negative if the line slopes downward from left to right, indicating that one variable increases while the other decreases.

To know more about Variables, visit:

https://brainly.com/question/17344045

#SPJ1

The correct answer is "two molecules of ATP are needed to 'activate' glucose".

In the first step of glycolysis, glucose is converted into glucose-6-phosphate, which requires the input of ATP. This reaction is catalyzed by the enzyme hexokinase. Therefore, two molecules of ATP are used in the early steps of glycolysis to activate glucose and convert it into glucose-6-phosphate. In the later steps of glycolysis, four molecules of ATP are produced by substrate-level phosphorylation, but since two molecules of ATP were used in the beginning, the net production of ATP is only two molecules per glucose molecule.

It is also important to note that glycolysis is the first step of both aerobic and anaerobic respiration and can occur without oxygen being present. However, the subsequent steps of cellular respiration, such as the Krebs cycle and electron transport chain, require oxygen in aerobic respiration to produce more ATP.

What is an ATP?

ATP stands for Adenosine Triphosphate, which is a molecule that carries energy within cells. It is often referred to as the "energy currency" of the cell because it powers many cellular processes by releasing its stored energy when it is hydrolyzed to ADP (Adenosine Diphosphate) and inorganic phosphate.

To know more about ATP, visit:

https://brainly.com/question/174043

#SPJ1

The atoms that are cis to the hydroxyl (OH) substituent are the two carbon atoms in the ring that are directly adjacent to the OH group.

Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of." Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry.

Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions. The absolute stereochemical explanation of E-Z isomerism does not necessarily equate to cis-trans notation.

The hydroxyl group (-OH) is attached to carbon number 1. The cis atoms are those that are attached to the same side of the ring. There are two atoms that are cis to the hydroxyl (OH) substituent, and these are atoms number 2 and 3. Therefore, the atoms that are cis to the hydroxyl (OH) substituent are atoms number 2 and 3 .

Thus, the cis to the hydroxyl (OH)  is (B) 2 and 3.

For more such questions on Cis-trans , Visit:

https://brainly.com/question/13557044

#SPJ11