Consider 1 mol an ideal gas at 28∘ C and 1.06 atm pressure. To get some idea how close these molecules are to each other, on the average, imagine them to be uniformly spaced, with each molecule at the center of a small cube.

A) What is the length of an edge of each cube if adjacent cubes touch but do not overlap?

B) How does this distance compare with the diameter of a typical molecule? The diameter of a typical molecule is about 10-10 m. (in l/dmolecule)

C) How does their separation compare with the spacing of atoms in solids, which typically are about 0.3 nm apart? (in l/lsolid)

Answers

Answer 1

Answer:

A) Length of an edge = 3.38 × 10^(-9) m

B) 34 times the diameter of a molecule.

C) 11 times the atomic spacing in solids.

Explanation:

A) We will use Avogadro's hypothesis to solve this. It states that 1 mole of gas occupies 22.4 L at STP.

We want to find the volume occupied by 1 mole of gas at 1.06 atm pressure and temperature of 28 °C (= 301 K).

Thus, by the ideal gas equation, we have;

V_mole = (1 × 22.4/273) × (301/1.06) = 23.3 L = 0.0233 m³

Now, since from avogadros number, 1 mole of gas contains 6.02 x 10^(23) molecules, then volume occupied by a molecule is given by;

V_molecule = 0.0233/(6.02 × 10^(23)) m³ = 3.87 x 10^(-26) m³

Thus, length of an edge of the cube = ∛(3.87 × 10^(-26)) = 3.38 × 10^(-9) m

B) We are told that The diameter of a typical molecule is about 10^(-10) m.

Thus, the distance is about;

(3.38 × 10^(-9))/(10^(-10)) ≈ 34 times the diameter of a molecule.

C) We are told that the spacing of atoms is typically are about 0.3 nm apart

Thus;

The separation will be about;

(3.38 × 10^(-9))/(0.3 × 10^(-9)) ≈ 11 times the atomic spacing in solids.


Related Questions

Electrons are accelerated through a voltage difference of 270 kV inside a high voltage accelerator tube. What is the final kinetic energy of the electrons?

Answers

Each electron winds up with kinetic energy of

(270 keV)

plus

(whatever KE it had when it started accelerating).

A mechanic wants to unscrew some bolts. She has two wrenches available: one is 35 cm long, and one is 50 cm long. Which wrench makes her job easier and why?

Answers

Answer:

50 cm long

When 35cm long wrench is compared to 50cm long wrench, we find that the 50cm long wrench produces more turning effect of force because it has longer distance between fulcrum and line of action of force. At conclusion, the more the turning effect of force the more it is easy to unscrew bolts.

UV radiaGon having a wavelength of 120 nm falls on gold metal, to which electrons are bound by 4.82 eV. What is the maximum kineGc energy of the ejected photoelectrons

Answers

Answer:

K.E = 5.53 eV = 8.85 x 10⁻¹⁹ J

Explanation:

First we calculate the energy of photon:

E = hc/λ

where,

E = Energy of Photon = ?

h = Plank's Constant = 6.626 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength = 120 nm = 1.2 x 10⁻⁷ m

Therefore,

E = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(1.2 x 10⁻⁷ m)

E = (16.565 x 10⁻¹⁹ J)(1 eV/1.6 x 10⁻¹⁹ J)

E = 10.35 eV

Now, from Einstein's Photoelectric equation we know that:

Energy of Photon = Work Function + K.E of Electron

10.35 eV = 4.82 eV + K.E

K.E = 10.35 eV - 4.82 eV

K.E = 5.53 eV = 8.85 x 10⁻¹⁹ J

The maximum kinetic energy of the ejected photoelectrons will be "8.85 × 10⁻¹⁹ J".

Kinetic energy

According to the question,

Speed of light, c = 3 × 10⁸ m/s

Wavelength, λ = 120 nm or,

                        = 1.2 × 10⁻⁷ m

Plank's Constant, h = 6.626 × 10⁻³⁴ J.s

Now,

The energy of photon will be:

→ E = [tex]\frac{hc}{\lambda}[/tex]

By substituting the values,

     = [tex]\frac{6.626\times 10^{-34}\times 3\times 20^8}{1.2\times 10^{-7}}[/tex]

     = [tex]\frac{16.565\times 10^{-19}}{\frac{1 \ eV}{1.6\times 10^{-19}} }[/tex]

     = 10.35 eV

By using Einstein's Photoelectric equation,  

Energy of Photon = Work function + K.E

                   10.35 = 4.82 + K.E

                       K.E = 10.35 - 4.82

                             = 5.53 eV or,

                             = 8.85 × 10⁻¹⁹ J

Thus the response above is correct.

Find out more information about Kinetic energy here:

https://brainly.com/question/25959744

15.Restore the battery setting to 10 V. Now change the number of loops from 4 to 3. Explain what happens to the magnitude and direction of the magnetic field. Now change to 2 loops, then to 1 loop. What do you observe the relationship to be between the magnitude of the magnetic field and the number of loops for the same current

Answers

Answer:

we see it is a linear relationship.

Explanation:

The magnetic flux is u solenoid is

      B = μ₀ N/L   I

where N is the number of loops, L the length and I the current

By applying this expression to our case we have that the current is the same in all cases and we can assume the constant length. Consequently we see that the magnitude of the magnetic field decreases with the number of loops

      B = (μ₀ I / L)  N

the amount between paracentesis constant, in the case of 4 loop the field is worth

      B = cte 4

N       B

4       4 cte

3       3 cte

2       2 cte

1        1 cte

as we see it is a linear relationship.

In addition, this effect for such a small number of turns the direction of the field that is parallel to the normal of the lines will oscillate,

The temperature of the hot spots caused by the impact of transferred matter onto the surface of a pulsar can be 108 K. What is the peak wavelength in the blackbody spectrum of such a spot, and in what range of the electromagnetic spectrum does it occur

Answers

Given that,

Temperature = 10⁸ K

We need to calculate the peak wavelength in the blackbody spectrum

Using formula of peak wavelength

[tex]peak\ wavelength = \dfrac{2.898\times10^{-3}}{T}[/tex]

Where, T= temperature

Put the value into the formula

[tex]peak\ wavelength = \dfrac{2.898\times10^{-3}}{10^{8}}[/tex]

[tex]peak\ wavelength = 2.90\times10^{-11}\ m[/tex]

[tex]peak\ wavelength = 290\ nm[/tex]

This range of wavelength is ultraviolet.

Hence, The peak wavelength in the blackbody spectrum is 290 nm and the range of wavelength is ultraviolet electromagnetic spectrum .

The ability of a water strider to move along the surface of water without breaking the surface is due to:

Answers

Answer:

The ability of a water strider to move along the surface of water without breaking the surface is due to:

SURFACE TENSION

Explanation:

this is because Water molecules are more attracted to each other than they are to other materials, so they generate a force to stay together called surface tension. Which allows the strider to move without breaking the surface

In a certain process a gas ends in its original thermodynamic state. Of the following, which is possible as the net result of the process?
A. It is adiabatic and the gas does 50 J of work.
B. The gas does no work but absorbs so J of energy as heat.
C. The gas does no work but rejects 50 J of energy as heat.
D. The gas rejects 50 J of energy as heat and does 501 of work.
E. The gas absorbs 50 of energy as heat and does 50」ot work.

Answers

Answer:

E. The gas absorbs 50 of energy as heat and does 50」ot work

Explanation:

This is following the law of thermodynamics that energy is neither created nor destroyed

What physical feature of a wave is related to the depth of the wave base? What is the difference between the wave base and still water level?

Answers

Answer:

physical feature of a wave is related to the depth of the wave base is The circular orbital motion

B. The wave base is the depth, and the still water level is the horizontal level

The sun generates both mechanical and electromagnetic waves. Which statement about those waves is true?
OA. The mechanical waves reach Earth, while the electromagnetic waves do not.
OB. The electromagnetic waves reach Earth, while the mechanical waves do not.
OC. Both the mechanical waves and the electromagnetic waves reach Earth.
OD. Neither the mechanical waves nor the electromagnetic waves reach Earth.

Answers

Answer: The correct answer for this question is letter (B) The electromagnetic waves reach Earth, while the mechanical waves do not. The sun generates both mechanical and electromagnetic waves. Space, between the sun and the earth is a nearly vacuum. So mechanical wave can not spread out in the vacuum.

Hope this helps!

Answer:

The electromagnetic waves reach Earth, while the mechanical waves do not

A plane electromagnetic wave travels northward. At one instant, its electric field has a magnitude of 9.6 V/m and points eastward. What are the magnitude (in T) and direction of the magnetic field at this instant?

Answers

Answer:

The values is  [tex]B = 3.2 *10^{-8} \ T[/tex]

The  direction is out of the plane

Explanation:

From the question we are told that

  The  magnitude of the electric field is  [tex]E = 9.6 \ V/m[/tex]

 

The  magnitude of the magnetic field is mathematically represented as

       [tex]B = \frac{E}{c}[/tex]

where c is the speed of light with value

      [tex]B = \frac{ 9.6}{3.0 *10^{8}}[/tex]

     [tex]B = 3.2 *10^{-8} \ T[/tex]

Given that the direction off the electromagnetic wave( c ) is  northward(y-plane ) and  the electric field(E) is eastward(x-plane ) then the magnetic field will be acting in the out of the page  (z-plane  )

     

A scientist is carrying out an experiment to determine the index of refraction for a partially reflective material. To do this, he aims a narrow beam of light at a sample of this material, which has a smooth surface. He then varies the angle of incidence. (The incident beam is traveling through air.)
The light that gets reflected by the sample is completely polarized when the angle of incidence is 46.5°.
(a) What index of refraction describes the material?
n =
(b) If some of the incident light (at θi = 46.5°) enters the material and travels below the surface, what is the angle of refraction (in degrees)?

Answers

Answer:

a) 1.05

b) 43.6°

Explanation:

a) The index refraction that describes the material can be found using Brewster's law:

[tex] \theta_{1} = arctan(\frac{n_{2}}{n_{1}}) [/tex]

where:

n₁ is the refractive index of the initial medium through which the light propagates (air) = 1

n₂ is the index of the material=?

θ₁ = 46.5°    

[tex] n_{2} = n_{1}tan(\theta_{1}) = tan(46.5) = 1.05 [/tex]

Hence, the material's index refraction is 1.05.

b) The angle of refraction can be found as follows:

[tex] n_{1}sin(\theta_{1}) = n_{2}sin(\theta_{2}) [/tex]

[tex]sin(\theta_{2}) = \frac{n_{1}sin(\theta_{1})}{n_{2}} = \frac{sin(46.5)}{1.05} = 0.69[/tex]

[tex] \theta_{2} = arcsin(0.69) = 43.6^{\circ} [/tex]

Therefore, the angle of refraction is 43.6°.

I hope it helps you!

A solenoid with 3,000.0 turns is 70.0 cm long. If its self-inductance is 25.0 mH, what is its radius? (The value of μ0 is 4π x 10-7 N/A2 .) A. 0.02219 m B. 327 m C. 52 m D. 0.00199 m

Answers

Answer:

A. 2.2*10^-2m

Explanation:

Using

Area = length x L/ uo xN²

So A = 0.7m * 25 x 10^-3H /( 4π x10^-7*

3000²)

A = 17.5*10^-3/ 1.13*10^-5

= 15.5*10^-2m²

Area= π r ²

15.5E-2/3.142 = r²

2.2*10^2m

Explanation:

A major strike-slip earthquake on the San Andreas fault in California will cause a catastrophic tsunami affecting residents of San Francisco.
a) true
b) false

Answers

Answer:

a) true

Explanation:

The san andres is a transform fault that forms boundary between the Pacific and the North Atlantic plate and this slip strike is characterized by the latex motion the fault runs in the length of the California state. This plate is widely estimated for the high magnitude of earthquakes and varies from 7.7 to 8.3 magnitude. They are capable of producing a deadly tsunami that can devastate the pacific northwest.

A group of students conducted several trials of an experiment to study Newton’s second law of motion. They concluded that tripling the mass required tripling the net force applied. What quantity were the students holding constant?

Answers

Answer:

1) Mass and acceleration

2) 4.0

3)When the net force applied to an object changes, the acceleration changes by the same factor.

4)acceleration

5)The acceleration is half of its original value

Explanation:

A wise man once said if you cheat together you succeed together! lol i am jk  

Which examination technique is the visualization of body parts in motion by projecting x-ray images on a luminous fluorescent screen?

Answers

Answer:

Fluoroscopy

Explanation:

A Fluoroscopy is an imaging technique that uses X-rays to obtain real-time moving images of the interior of an object. In its primary application of medical imaging, a fluoroscope allows a physician to see the internal structure and function of a patient, so that the pumping action of the heart or the motion of swallowing, for example, can be watched.

A parallel plate air-filled capacitor is being charged.The circular plates have a radius of 4.00cm, and at a particular instant the conduction current in the wiresis 0.280A.


a. What is the displacement current density (jD) in theair space between the plates?

b. What is the rate at which the electric field between the platesis changing?

c. What is the induced magnetic field between the plates at adistance of 2.00 cm from the axis?

d. What is the induced magnetic field between the plates at adistance of 1.00 cm form the axis?

Answers

Answer:

Given that

capacitor being charged by a current i c has a displacementcurrent equal to i c between the plates∴

displacement current iD =i c=0.280 Aradius of the circular plate r = 4 cm=0.04 m

( A ) . displacement current density j D = iD / ( π r 2 )=0.28 / ( 3.14 * 0.04 2 )=55.73 A / m 2

( B ) . displacement current density j

D = ε( dE / dt )the rate at which the electric field between the plates is changing(

dE / dt ) = jD/ εdE/ dt ) = 55.73/ 8.85 * 10 -12=6.3*10 12 N / C - s( C ) . the induced magnetic field between theplates B = ( μ * r / 2π R 2) * i c ----( 1 )whereR= 2 cm=0.02 mr= 4 cm=0.04 mμ=permeability of free space=4π* 10 -7 H( D )substitute R = 1 cm = 0.01 m inequation ( 1 ),wegetanswer

front wheel drive car starts from rest and accelerates to the right. Knowing that the tires do not slip on the road, what is the direction of the friction force the road applies to the rear tire

Answers

Answer:

The frictional force the road applies to the rear tire is static friction and it acts opposite to the direction in which the car is traveling.

Explanation:

This question suggests that the car is accelerating forward. Thus, the easiest way for us to know what friction is doing is for us to know what happens when we turn friction off.

Now, if there is no friction and the car is stopped, if we push down on the accelerator, it will make the front wheels to spin in a clockwise manner. This spin occurs on the frictionless surface with the rear wheels doing nothing while the car doesn't move.

Now, if we apply friction to just the front wheels, the car will accelerate forward while the back wheels would be dragging along the road and not be spinning. Thus, friction opposes the motion and as such, it must act im a direction opposite to where the car is going. This must be static friction.

The frictional force the road applies to the rear tire is static friction and it acts opposite to the direction in which the car is traveling.

A 1300-turn coil of wire 2.40 cm in diameter is in a magnetic field that increases from 0 T to 0.120 T in 9.00 ms . The axis of the coil is parallel to the field. What is the emf of the coil?

Answers

Answer:

The induced emf in the coil is 7.843 V

Explanation:

Given;

number of turns of the coil, N = 1300 turn

diameter of the coil, d = 2.4 cm = 0.024 m

initial magnetic field, B₁ = 0 T

final magnetic field, B₂ = 0.12 T

change in time, dt = 9.0 ms = 9 x 10⁻³ s

Area of the coil is given by;

A = πr²

radius of the coil, r = 0.024 / 2

radius of the coil, r = 0.012 m

A = π(0.012)²

A = 4.525 x 10⁻⁴ m²

The induced emf in the coil is given by;

E = NA(dB/dt)

E =  NA [(B₂ - B₁) /dt]

E = 1300 x 4.525 x 10⁻⁴ (0.12 - 0) / (9 x 10⁻³)

E = 7.843 V

Therefore, the induced emf in the coil is 7.843 V

In the direction perpendicular to the drift velocity, there is a magnetic force on the electrons that must be cancelled out by an electric force. What is the magnitude of the electric field that produces this force

Answers

Answer:

E = VdB

Explanation:

This is because canceling the electric and magnetic force means

q.vd. B= we

E= Vd. B

Reading glasses with a power of 1.50 diopters make reading a book comfortable for you when you wear them 1.8 cmcm from your eye. Part A If you hold the book 28.0 cmcm from your eye, what is your nearpoint distance

Answers

Answer:

The near point is  [tex]n =44.8 \ cm[/tex]

Explanation:

From the question we are told that

   The power is  [tex]P = 1.50[/tex]

   The  distance from the eye is  [tex]k = 1.8 \ cm[/tex]

    The distance of the book from the eye is [tex]z = -28 \ cm[/tex]

Generally the focal length of the glasses is  

       [tex]f = \frac{1}{P}[/tex]

=>   [tex]f = \frac{1}{1.50 }[/tex]

=>   [tex]f = 0.667 \ m[/tex]

=>   [tex]f = 66.7 \ cm[/tex]

The object distance is evaluated as

     [tex]u = z + k[/tex]

=>   [tex]u = -28 + 1.8[/tex]

=>  [tex]u = -26.2 \ cm[/tex]

The image distance is evaluated from lens formula as

       [tex]\frac{1}{v} = \frac{1}{f} + \frac{1}{u}[/tex]

=>   [tex]\frac{1}{v} = \frac{1}{66.7} + \frac{1}{-26.2}[/tex]

=>   [tex]v=- \frac{1}{0.0232}[/tex]

=>    [tex]v=- 43 \ cm[/tex]

The  near point is evaluated as

      [tex]n = -v + k[/tex]

=>    [tex]n =-(-43) + 1.8[/tex]

=>    [tex]n =44.8 \ cm[/tex]

The two metallic strips that constitute some thermostats must differ in:_______
A. length
B. thickness
C. mass
D. rate at which they conduct heat
E. coefficient of linear expansion

Answers

Answer:

E. Coefficient of linear expansion

At the B end of the recessed horizontal bar, forces F1 and F2 of magnitudes 3 KN and 2KN respectively are applied and oriented as shown in the figure. Determine the magnitude of the resulting force and its orientation with respect to the horizontal.

Answers

Answer:

2.98 kN, 69.1° below the horizontal

Explanation:

Sum of forces in the x direction:

Fₓ = 3 kN cos 30° − 2 kN cos 40°

Fₓ ≈ 1.07 kN

Sum of forces in the y direction:

Fᵧ = -3 kN sin 30° − 2 kN sin 40°

Fᵧ = -2.79 kN

Magnitude of the resultant force is:

F² = Fₓ² + Fᵧ²

F = 2.98 kN

The direction of the resultant force is:

tan θ = Fᵧ / Fₓ

θ = -69.1°

Can a car moving with a negative velocity moves faster than a car moving with a positive velocity? explain.

Answers

Answer:

Yes.

Explanation:

This is because "negative velocity" just means it is in the negative in relation to the point of 0. Negative velocity doesn't equal a decrease in velocity. For example lets say you were parked next to a cone (this cone represents zero) if you accelerate forwards then that would be positive acceleration. If you were to accelerate backwards, this would be in the negative direction, aka negative velocity.

SUMMARY:

A negative velocity means that the object which has the negative velocity is moving in the opposite direction of an object moving at a positive velocity. This is a question of frame of reference. The possibility for the velocity is what makes it different to the speed. Speed is only positive.

Suppose a 500 mb chart valid today at 12 Z indicates a large trough over the eastern US and a large ridge over the western US. An aircraft, flying in the vicinity of 18,000 ft altitude from west to east over the US at 12 Z today, will _____ altitude if the altimeter is not corrected. Group of answer choices

Answers

Answer:

An aircraft, flying in the vicinity of 18,000 ft altitude from west to east over the US at 12 Z today, will __LOSE___ altitude if the altimeter is not corrected

If the distance from your eye's lens to the retina is shorter than for a normal eye, you will struggle to see objects that are

Answers

Answer:

far away

Explanation:

There are different types of eye defect ranging from short sightedness, longsighted, astigmatism, presbyopia etc.

If someone is only able to see close ranged object clearly but not far distant object, then such person is suffering from short sightedness or myopia. This occurs when the light rays entering the eye does not converge on the retina. Instead of converging on the retina, the light ray is formed on a point in front of the retina. This causes the distance from the eye's lens to the retina shorter compared to that of a normal eye. This eye defect is usually corrected using concave lens in order to diverge the rays thereby allowing it to focus on the retina.

Hence, if the distance from your eye's lens to the retina is shorter than for a normal eye, you will struggle to see objects that are far away (at a far distant).

Two separate disks are connected by a belt traveling at 5m/s. Disk 1 has a mass of 10kg and radius of 35cm. Disk 2 has a mass of 3kg and radius of 7cm.
a. What is the angular velocity of disk 1?
b. What is the angular velocity of disk 2?
c. What is the moment of inertia for the two disk system?

Answers

Explanation:

Given that,

Linear speed of both disks is 5 m/s

Mass of disk 1 is 10 kg

Radius of disk 1 is 35 cm or 0.35 m

Mass of disk 2 is 3 kg

Radius of disk 2 is 7 cm or 0.07 m

(a) The angular velocity of disk 1 is :

[tex]v=r_1\omega_1\\\\\omega_1=\dfrac{v}{r_1}\\\\\omega_1=\dfrac{5}{0.35}\\\\\omega_1=14.28\ rad/s[/tex]

(b) The angular velocity of disk 2 is :

[tex]v=r_2\omega_2\\\\\omega_2=\dfrac{v}{r_2}\\\\\omega_2=\dfrac{5}{0.07}\\\\\omega_2=71.42\ rad/s[/tex]

(c) The moment of inertia for the two disk system is given by :

[tex]I=I_1+I_2\\\\I=\dfrac{1}{2}m_1r_1^2+\dfrac{1}{2}m_2r_2^2\\\\I=\dfrac{1}{2}(m_1r_1^2+m_2r_2^2)\\\\I=\dfrac{1}{2}\times (10\times (0.35)^2+3\times (0.07)^2)\\\\I=0.619\ kg-m^2[/tex]

Hence, this is the required solution.

A wave travelling along the positive x-axis side with a
frequency of 8 Hz. Find its period, velocity and the distance covered
along this axis when its wavelength and amplitude are 40 and 15 cm
respectively.​

Answers

Explanation:

The frequency is given to be f = 8 Hz.

Period is the inverse of frequency.

T = 1/f = 0.125 s

Velocity is wavelength times frequency.

v = λf = (0.40 m) (8 Hz) = 3.2 m/s

The wave travels 3.2 meters every second.

You want the current amplitude through a 0.450 mH inductor (part of the circuitry for a radio receiver) to be 1.50 mA when a sinusoidal voltage with an amplitude of 13.0 V is applied across the inductor. What frequency is required?

Answers

Answer:

3.067MHz

Explanation:

The formula for calculating the voltage across an inductor is expressed as

[tex]V_l = IX_l\\\\Since\ X_l = 2\pi fL\\V_l = I(2\pi fL)[/tex]

Given parameters

current amplitude I = 1.50mA = 1.5*10⁻³A

inductance L = 0.450mH = 0.450*10⁻³H

Voltage across the inductor [tex]V_l[/tex] = 13.0V

Required

frequency f

Substituting the given parametres into the formula, we have;

[tex]V_l = I(2\pi fL)\\\\13 = 1.50*10^{-3}(2*3.14*f*0.450*10^{-3})\\\\13 = 4.239*10^{-6}f\\\\f = \frac{13}{4.239*10^{-6}} \\\\f = 3,066,761 Hertz\\\\f = 3.067MHz[/tex]

Hence, the frequency required is 3.067MHz

How many heartbeats in a typical human lifetime? Enter your answer as a number (NOT as a power of ten) and in one significant figure.​

Answers

Answer:

20,000,000,000

Explanation:

As we've seen, humans have on average a heart rate of around 60 to 70 beats per minute, give or take. We live roughly 70 or so years, giving us just over 2 billion beats all up.Apr

Coherent light from a sodium-vapor lamp is passed through a filter that blocks everything except for light of a single wavelength. It then falls on two slits separated by 0.490 mm . In the resulting interference pattern on a screen 2.12 m away, adjacent bright fringes are separated by 2.86 mm . For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Determining wavelength. Part A What is the wavelength of the light that falls on the slits

Answers

Answer:

λ = 6.61 x 10⁻⁷ m = 661 nm

Explanation:

From the Young's Double Slit experiment, the the spacing between adjacent bright or dark fringes is given by the following formula:

Δx = λL/d

where,

Δx = fringe spacing = 2.86 mm = 2.86 x ⁻³ m

L = Distance between slits and screen = 2.12 m

d = slit separation = 0.49 mm = 0.49 x 10⁻³ m

λ = wavelength of light = ?

Therefore,

2.86 x 10⁻³ m = λ(2.12 m)/(0.49 x 10⁻³ m)

(2.86 x 10⁻³ m)(0.49 x 10⁻³ m)/(2.12 m) = λ

λ = 6.61 x 10⁻⁷ m = 661 nm

Other Questions
Simplify -2x^3 y x xy^2 (4x2y3)2=? thank you for the help Suppose that the values of x, y, and z are given by x=2/3 y=5/7 z= -11/3 What is xy/z i give you 5 stars please help February 1, 2018, Salisbury Company purchased land for the future factory location at a cost of $112,000. The dilapidated building that was on the property was demolished so that construction could begin on the new factory building. The new factory was completed on November 1, 2018. Costs incurred during this period were: Item Amount Demolition dilapidated building $2,000 Architect Fees $11,250 Legal Fees - for title search $1,450 Interest During Active Construction Period $5,025 Real estate transfer tax $975 Construction Costs $605,000 Using this information, how much should be recorded as the cost of the land? Please help! Simplify: 3(2x-4y) - 2(4y-x) Thank you! in a study of tv dramas, a researcher examines how often characters in a romance resort to violence. What kind of structual question is being asked Group-oriented negotiators are concerned about their own interests above all else. Is this statement true or false? NEED ANSWER ASAP!! PLEASE!!! The length of a rectangle is 1 foot more than twice the width. Write an expression that represents the length. *PLEASE ANSWER* Compare the volume of these two shapes,given their radii and heights are the same . why do veins have valves Martin Shkreli, former CEO of pharmaceutical company Retrophin,, has many traits of a leader. He is very intelligent, brash, extroverted, and driven to succeed. But he lacks the key trait to keep the confidence of others, which eventually led to a fraud conviction. He lacks Suppose you observe the following situation: Security Beta Expected Return A 1.16 .1137 B .92 .0984 Assume these securities are correctly priced. Based on the CAPM, what is the return on the market What helps determine apopulation's carrying capacity?A. the rate of primary productivityB. the amount of available resourcesC, the average age of the members of thepopulation A number is chosen at random from 1 to 10. Findthe probability of selecting 4 or a factor of 6.Step by step. Roselyn is driving to visit her family, which lives 150150150 kilometers away. Her average speed is 606060 kilometers per hour. The car's tank has 202020 liters of fuel at the beginning of the drive, and its fuel efficiency is 666 kilometers per liter. Fuel costs 0.600.600, point, 60 dollars per liter. Chemistry deals with all the following except: Select one: a. The composition of matter. b. The properties of matter. c. Our eating habits. d. The conversion of matter between various states. Give an example from American history of a time when the majority of Americans were wrong about an issue and tried to take away the rights of others. A plan for a dog park has a grassy section and a sitting section as shown in the figure. Which equation can be used to find the area of the grassy section? A share of stock is now selling for $120. It will pay a dividend of $10 per share at the end of the year. Its beta is 1. What must investors expect the stock to sell for at the end of the year? Assume the risk-free rate is 6% and the expected rate of return on the market is 18%. (Round your answer to 2 decimal places.)