The correct classification of the given substances as cofactors or coenzymes are as follows:
lipase - neitherinorganic ion - cofactorascorbic acid - coenzymeCoQ - coenzymeFAD - coenzymeWhat are coenzymes and cofactors?A coenzyme is any small molecule that is necessary for the functioning of an enzyme. They are required by many enzymes for catalytic activity.
Coenzymes are often vitamins, or derivatives of vitamins. Sometimes they can act as catalysts in the absence of enzymes, but not so effectively as in conjunction with an enzyme.
Cofactors, on the other hand, are substances, especially a coenzyme or a metal, that must be present for an enzyme to function.
Coenzymes are organic molecules and quite often bind loosely to the active site of an enzyme and aid in substrate recruitment, whereas cofactors do not bind the enzyme.
Learn more about coenzyme at: https://brainly.com/question/29386956
#SPJ1
__________ is a pulling force. Atmospheric pressure also acts as a force on objects
Answer:
Gravity
Explanation:
When warm air from a large body of water moves quickly into a land area of cold air, we can expect _________ to occur where the two air masses meet.
Answer: thunderstorms
Explanation:
list at least Three chemical reactions that occur in making bread
Explanation:
Fermentation: When yeast is added to the dough, it begins to ferment the sugars present in the dough, producing carbon dioxide and ethanol. The carbon dioxide helps to leaven the dough, while the ethanol is mostly evaporated during baking.
Maillard reaction: During baking, the heat causes a reaction between the amino acids and sugars in the dough, producing a wide range of compounds that give bread its characteristic flavor and aroma. This reaction is known as the Maillard reaction.
Protein denaturation: The heat of baking causes the proteins in the dough to denature, or lose their native conformation. This helps to give bread its texture and structure, and also contributes to the development of its crust.
A student wants to determine the effect of a fertilizer on the growth of bean plants. She sets
up the following experiment.
Bean
Soil
Fertilizer
Daily water 50 mL
A
Bean
Soil
Daily water 50 mL
2. What does setup "B" represent and why is it important in this experiment?
ANSWER QUESTION 2 NOT QUESTION 1
The experimental set up in B is to observe the growth the green beans without the addition of fertilizer. Thus, we can compare the growth of the plant with and without fertilizer and thereby we can understand the effect the fertilizer on the plant growth.
What is fertilizer?Fertilizers are chemical substances used to nourish the plants by making the soil rich in nutrients and minerals. Plants needs minerals along with water such as potassium, calcium, phosphorous, nitrogen etc.
Sometimes the soil comes deficient of these minerals and we have to fertilize the soli by the addition of the chemicals containing these minerals. Hence, fertilizers provide a nutrient rich soil for plant growth.
The experimental set up with fertilizer added plant and the second one (B) without fertilizer helps to compare the growth in both conditions and we can clearly understand how fertilizers effect the growth of plants by comparing the plant growth in A and B.
To find more on fertilizers, refer here:
https://brainly.com/question/24196345
#SPJ1
what is the form of energy contained in a dam called? group of answer choices nuclear chemical kinetic potential
Potential Energy is the form of energy contained in dam.
Total energy:
The total energy of each considered object is the sum of its potential energy (P.E) and kinetic energy (K.E) and is constant throughout motion. For example, at finite height, a ball has maximum potential energy and zero kinetic energy, and when released, K.E increases and becomes maximum at ground level, and P.E decreases to zero at ground level. , so the total energy increases. There is movement of the ball in the same way everywhere. The energy that an object has due to its motion is called kinetic energy, and the energy that an object has due to its position and shape is called potential energy.
Here the water dammed by the dam has a certain potential height. This means that water has latent energy because it is located far from the bottom. Therefore, water dammed up by a dam has potential energy.
Potential Energy:
In physics, potential energy is the energy possessed by an object due to its position relative to other objects, its own tension, electrical charge, or other factors. Common types of potential energy are the gravitational potential energy of a body, the elastic potential energy of an extended spring, and the electrical potential energy of an electric charge in an electric field. The unit of energy in the International System of Units (SI) is the joule, and the symbol is J.
Learn more about Potential Energy:
https://brainly.com/question/24284560
#SPJ4
the solubility of caf2 is measured to be 0.017 g/l. based on this information, what is ksp for caf2? the molar mass of caf2 is 78.075 g/mol.
The molar mass of caf2 is 78.075 g/mol is 4.14 x 10^ -11.
CaF2 (s) <----> Ca2+ (aq) + 2F- (aq)
At equilibrium [Ca2+] = S , [F-] = 2S , where S is amount of CaF2 dissolved i.e solubility.
The molar mass of a chemical compound is determined by dividing its mass by the quantity of that compound, expressed as the number of moles in the sample, measured in moles. The molar mass of a material is a bulk attribute rather than a molecular one.
given S = 1.7 x 10^ -2 g/L = 0.017 g/L
we can convert g/L to mol/L by dividing S with Molar mass of CaF2
S in mol / L = (S in g/L) / ( CaF2 molar mass) = ( 0.017g/L) / ( 78.07g/mol) = 0.000218 mol /L
[F-] = 2S = 2 x ( 0.000218) = 0.000436 mol/L
now Ksp = [Ca2+] [F-]^2
= ( 0.000218 ) (0.000436 )^2
= 4.14 x 10^ -11
To learn more about solubility visit:https://brainly.com/question/29661360
#SPJ4
a 2.00g sample of limestone was dissolved in hydrochloric acid and all the calcium present in the sample was converted to ca2 (aq). excess ammonium oxalate solution, (nh4)2c2o4(aq), was added to the solution to precipitate the calcium ions as calcium oxalate, cac2o4(s). the precipitate was filtered, dried and weighed to a constant mass of 2.43g. determine the percentage by mass of calcium in the limestone sample.
In order to precipitate the calcium ions as calcium oxalate, a 2.00g sample of limestone was first dissolved in hydrochloric acid until all of the calcium was transformed to Ca²⁺ (aq). This was followed by the addition of excess ammonium oxalate solution, (NH₄)₂C₂O₄(aq). Filtered, dried, and weighed to a consistent mass of 2.43g. The percentage by mass of calcium in the limestone sample is 31.25%
The percentage by mass of calcium in the limestone can be calculate as follows:
Mass of precipitate that is calcium oxalate = 2.43 g
Moles of calcium oxalate = 2.00g /128 g/mol = 0.015625 moles
One mole of calcium atoms make up one mole of calcium oxalate.
so, 0.015625 moles calcium oxalate equal to 0.015625 moles calcium atoms
Mass of 0.015625 moles of calcium :
0.015625 mol × 40 g/mol = 0.625 g
Mass of sample of limestone = 2 g
Percentage of calcium in limestone:
(0.625 g/2 g) x 100 = 31.25%
Learn more about mass percentage at https://brainly.com/question/20813398
#SPJ4
PLEASE HELP IM GONNA FAIL THIS WHOLE YEAR PLEASE
Answer:
Mg+HCl = MgCl+H2
Explanation:
you just have to write the correct formula of these elemernt
. n specifies fill in the blank 4 l specifies fill in the blank 5 ml specifies fill in the blank 6 ... a.the orbital orientation. b.the energy and average distance from the nucleus. c.the subshell - orbital shape.
n specifies B. The energy and average distance from the nucleus, l specifies C. The subshell - orbital shape, ml specifies A. The orbital orientation.
n is known Principal quantum number
l is known Azimuthal quantum number
ml is known Magnetic quantum number
The energy and usual distance from the nucleus are described by the fundamental quantum number, or n.
The subshell and orbit's shape are described by the orbital quantum number, or l.
The orbit's direction is described by the magnetic quantum number, ml.
So, n specifies B. The energy and average distance from the nucleus.
l specifies C. The subshell - orbital shape.
ml specifies A. The orbital orientation.
Thus, n specifies B., l specifies C., ml specifies A.
To learn more about Orbitals, Here :
https://brainly.com/question/29065230?referrer=searchResults
#SPJ4
which of the following is false about crystal field theory? group of answer choices weak field ligands absorb purple light. the color of a coordination compound is the color of light absorbed.
The following statement is false about crystal field theory : the color of a coordination compound is the color of light absorbed.
Crystal field theory (CFT) describes how a static electric field produced by a surrounding charge distribution breaks degeneracies of electron orbital states, usually d or f orbitals (anion neighbours).
Hans Bethe, a physicist, developed the crystal field theory (CFT) for crystalline solids in 1929.
The following is how Crystal Field Theory explains the colors of coordination compounds: The splitting of a d-orbital into multiple orbitals is known as crystal field splitting. When white light strikes the compound, an electron moves into a higher state, absorbing a specific wavelength of light.
For more information on Crystal field theory (CFT), visit :
https://brainly.com/question/29389010
#SPJ4
How many liters (L) of water need to be added to prepare 1000mL of
0.3M NaCI from a 5M NaCI stock solution?
The amount, in liters, of water needed to be added to prepare 1000 mL of 0.3 M NaCl from a 5 M NaCl stock solution would be 0.94 L.
Dilution problemAccording to the dilution principle, the number of moles of solutes before dilution must be equal to the number of moles of solutes after dilution. This is mathematically expressed as:
[tex]m_1v_1[/tex] = [tex]m_2v_2[/tex]
Where [tex]m_1[/tex] and [tex]m_2[/tex] are molarities before and after dilution, and [tex]v_1[/tex] and [tex]v_2[/tex] are volumes before and after dilution.
In this case, [tex]m_1[/tex] = 5 M, [tex]m_2[/tex] = 0.3 M, [tex]v_2[/tex] = 1000 mL.
Let's find [tex]v_1[/tex]:
[tex]v_1[/tex] = [tex]m_2v_2[/tex] /[tex]m_1[/tex]
= 0.3x1000/5
= 60 mL
In other words, the volume of the stock solution to be taken is 60 mL. This volume has to be diluted by water to the 1000 mL mark. Thus, the amount of water to be added would be:
1000 - 60 = 940 mL
940 mL = 0.94 L
In summary, 0.94 L of water will be required to prepare the solution.
More on dilution problems can be found here: https://brainly.com/question/29093084
#SPJ1
Describe where the error (if any) is in the following orbital diagram. If there is an error, be sure to include the name of the rule and how to correct it. It is okay that the orbital diagram is horizontal- this is a space saver (energy increases to the right).
The electrons in an atom are depicted in orbital diagrams in visual form. For creating orbital diagrams, three rules are helpful.
What is Orbital diagram?Each electron resides in the orbital with the , in accordance with the Auf Bau Principle.
According to the Pauli Exclusion Principle, an orbital can hold no more than two electrons. According to Hund's rule, electrons enter various orbitals within a single sub-level before doubling up within orbitals.
We have seen how the quantity and kind of valence electrons play a crucial role in establishing the chemical characteristics of a specific element. Due to their propensity to lose their single valence, Group 1A metals are extremely reactive.
Therefore, The electrons in an atom are depicted in orbital diagrams in visual form. For creating orbital diagrams, three rules are helpful.
To learn more about orbital diagram, refer to the link:
https://brainly.com/question/28809808
#SPJ1
please help!
Are magnesium and calcium more reactive with oxygen in the air than is aluminum? Support your answer.
Magnesium and calcium are 2nd group elements with 2 valence electrons. They are metals in room temperature and easily lose these electrons to nonmetals such as oxygen.
What is magnesium ?Magnesium is 12th element in periodic table. It is 2nd group element and is a called alkaline earth metals. Its group members are calcium, strontium, and barium.
They contains 2 valence electrons which can be easily lost to a non-metal. Oxygen is highly electronegative element and it contains 6 valence electrons and need two more electrons to achieve octet.
Al is 13th group element it is not as much electropositive as alkaline earth metals. It contains 3 valence electrons and thus it need to lose all these 3 electrons to achieve octet. Hence, Al is less reactive towards O2 in comparison with Mg and Ca.
To find more on metal oxides, refer here:
https://brainly.com/question/22966565
#SPJ1
• How does the weight on a bicycle affects the force required to affect its motion?
Answer:
More mass means more force is needed to achieve the same change in speed in the same amount of time. That force is transmitted from the road, to the tires, to the wheels, through the brakes, to the frame and rider.
The weight on a bicycle affects the force required to accelerate it as it increases inertia it will slow down its rate of acceleration.
What is Acceleration?
Acceleration is defined as the rate of change of velocity of an object with respect to time. These are vector quantities which have magnitude as well as direction.
The orientation of the acceleration of an object as given by the orientation of the net force acting on that object. It is expressed as:
[tex]\overline{a} = \frac{v - v_0}{t} = \frac{\Delta v}{\Delta t}\overline{a} = average acceleration\\v = final velocity\\v_0 = starting velocity\\t = elapsed time[/tex]
Acceleration is proportional to the force applied, so the greater the force, the greater the speed of the object in the direction of the force. Mass is inertia, which is the reluctance to accelerate, so for the same force, more massive objects experience smaller acceleration than less massive objects.
Thus, the weight on a bicycle affects the force required to accelerate it as it increases inertia it will slow down its rate of acceleration.
Learn more about Acceleration, here:
https://brainly.com/question/2303856
#SPJ2
help fast Which products are the result of a reaction between potassium fluoride, KF, and sodium hydroxide, NaOH?
KNa and FOH
KOH and NaF
Na and KFOH
K and FNaOH
Potassium fluoride and sodium hydroxide react to produce potassium hydroxide and sodium fluoride respectively. Option 2.
Chemical reactionPotassium fluoride and sodium hydroxide undergo a double decomposition reaction. They exchange radicals to produce potassium hydroxide and sodium fluoride respectively according to the following equation:
[tex]KF + NaOH --- > KOH + NaF[/tex]
Potassium is able to displace sodium from sodium hydroxide because it is higher on the reactivity series of metals than sodium.
Thus, the product of the reaction of potassium fluoride and sodium hydroxide are [tex]KOH[/tex] and [tex]NaF[/tex].
More on chemical reactions can be found here: https://brainly.com/question/29762834
#SPJ1
How many liters (L) of water need to be added to prepare 1000mL of 0.3M NaCl from a 5M NaCl stock solution?
The amount of water needed to be added to prepare the solution would be 0.94 liters.
Dilution problemWhen diluting solutions, the number of moles of solutes before dilution must be equal to the number of solutes after dilution. The only thing that changes are the volume and concentration.
Thus, the equation of dilution is:
[tex]m_1v_1[/tex] = [tex]m_2v_2[/tex]
Where
[tex]m_1[/tex] is molarity before dilution[tex]v_1[/tex] is volume before dilution[tex]m_2[/tex] is molarity after dilution[tex]v_2[/tex] is volume after dilutionIn this case:
[tex]m_1[/tex] = 5 M, [tex]m_2[/tex] = 0.3 M, and [tex]v_2[/tex] = 1000 mL
Substituting:
5[tex]v_1[/tex] = 0.3 x 1000
[tex]v_1[/tex] = 300/5
= 60 mL
This means that the volume of the stock solution to be taken is 60 mL. The amount of water to be added would then be:
1000 - 60 = 940 mL
940 mL = 0.94 L
In other words, the amount of water needed to be added to prepare 1000 mL of 0.3M NaCl from a 5 M NaCl stock solution is 0.94 L.
More on dilution problems can be found here: https://brainly.com/question/29093084
#SPJ1
9. The Sun is powered by the fusion of hydrogen atoms into
helium atoms. When the Sun has exhausted its hydrogen sup-
ply, it could fuse helium-4, forming carbon-12. Write a
balanced nuclear equation for this process.
Answer: A balanced nuclear equation for the fusion of helium-4 to form carbon-12 would be:
He-4 + He-4 -> C-12 + energy
In this equation, two helium-4 atoms fuse to form a single carbon-12 atom and release energy. This process would occur in the core of the Sun once it has exhausted its supply of hydrogen and begins to fuse helium-4.
The compound between Sulfur and Magnesium is _
Answer:
Magnesium sulfide
Explanation:
✔ Question 1
Below is a picture of the rock strata of a mountain.
What can you infer about the layers in this picture?
Sedimentary rock layers are referred to as rock strata.
What is a rock?A rock is a dense mass of mineral grains that have grown or been cemented together over time. There are big rocks and little rocks. Pebbles are little rocks.
The sediment grains that are deposited by water, wind, or ice become sedimentary rocks. They are always formed in layers and are referred to as "beds" or "strata," and frequently include fossils.
Weathering, erosion, deposition, compaction, and cementation are the processes that result in the formation of these horizontal layers. Newer layers are deposited and created during this process on top of older layers, allowing for the relative dating of each layer.
Learn more about rocks on:
https://brainly.com/question/25846908
#SPJ1
Ultra-light vs. Ultra-hard
Compared to the atomic arrangement of atoms in diamond, the atomic arrangement of atoms in the ultra-light material were..
a arranged in a line of atoms
b spread apart, chaotic, and spongy
c arranged in a pattern of highly organized crystals
d flat orderly 2-dimensional sheets
Compared to the atomic arrangement of atoms in diamond, the atomic arrangement of atoms in the ultra-light material were option B: spread apart, chaotic, and spongy.
What is the atomic arrangement about?The atomic arrangement of atoms in the ultra-light material described in the question is likely to be different from that of diamond. Diamond is a very hard and rigid material, with a highly ordered and crystalline atomic structure.
In contrast, the ultra-light material is described as being "spread apart, chaotic, and spongy," which suggests that its atomic arrangement is much less organized and more disordered than that of diamond.
Therefore, based on the above, this may be due to the use of a different type of bonding between atoms, or a different arrangement of atoms within the material, which results in a less rigid and more flexible structure.
Learn more about atomic arrangement from
https://brainly.com/question/873464
#SPJ1
Dna has an important role in making proteins, the biomolecules that help determine our traits as well as take part in chemical reactions throughout our bodies. Can you correctly label the steps/parts involved in protein synthesis?.
Protein synthesis is a process that is generated within cells where different organelles and genetic components are involved through which proteins are generated.
What are the steps of protein formation?The biosynthesis of proteins will be given by different parts, beginning with the translation of the genetic material. It will be given by different steps:
1. mRNA binds to ribosomes and the aminoacyl-tRNA to be associated to the first codon of the mRNA is associated.
2. The elongation of the polypeptide chain occurs, in which the amino acids are joined
3. The elongation is finished when the termination codons are reached.
4. The translation components are released and post-translational modifications are started.
5. The folding, glycosylation and modification of amino acids occur
6. Finally, the protein is released to generate its function
To learn more about protein synthesis visit: https://brainly.com/question/29765585
#SPJ1
Which of the following concentration measures will change in value as the temperature of a solution changes?
1. mass percent
2.mole fraction
3. molality
4. molarity
5. all of these
The concentration measures will change in value as the temperature of a solution changes is molarity. The correct option is 4.
What is molarity?The molarity of a substance refers to how much of it is present in a given volume of solution (M). Molarity is the measure of how many moles of a solute are present per liter of a solution. Molarity is also referred to as a solution's molar concentration.
To find the equation for molarity, divide the volume of solvent used to dissolve the given solute by the number of moles of that solute. M = n V
Since the volume of the solution rises as the temperature rises, molarity decreases. Therefore, molarity is normally affected when therefore is a change in temperature of a solution either when it increases or decreases.
Learn more about molarity below.
https://brainly.com/question/14469428
#SPJ1
hydrogen cyanide, hcn, is a poisonous gas. the lethal dose is approximately 300 hcn per kilogram of air when inhaled. (a) calculate the amount of hcn that gives the lethal dose in a small laboratory room measuring . the density of air at is 0.00118 (b) if the hcn is formed by reaction of with an acid such as what mass of nacn gives the lethal dose in the room?
The amount of HCn that gives the lethal dose in a small laboratory room measuring the density of air at is 0.00118 is 14.4 g of the HCN.
The volume of the air present in laboratory room is as :
volume of laboratory room = length × breadth × height
= 12 × 15 × 8 ft³
= 1440 ft³ = 4.08 × 10⁷ cm³
The mass of air = density of air × volume of the laboratory room
= 0.00118 g /cm³ × 4.08 × 10⁷ cm³
= 48210.7 g = 48.21 kg
a) The lethal dose of HCN in the 1kg of the air = 300 × 10⁻³ g of HCN
therefore , for 48.21 kg = 300 × 10⁻³ × 48.21
= 14.4 g
b) 2 moles of the HCN form the 2 moles of NaCN
molar mass of NaCN = 49 g/mol
molar mass of HCN = 27 g/mol
54 g of HCN will form 98 g of NaCN
14.4 g of HCN is consider as the lethal dose
theferfore , mass of NaCN give the lethal dose = (98 / 54 ) 14.4
= 26.22 g
To learn more about lethal dose here
https://brainly.com/question/11526333
#SPJ4
After hockey practice, Carissa and Keenan were playing a game where they were pushing some objects to get them to crash. They were using a cone and two different pucks—a black one with more mass for Crash 1 and a blue one with less mass for Crash 2. They want to know what happened to the cone. Use the information from the diagram to answer. In which crash did the cone experience a stronger force? How do you know?
The crash where the cone experience a stronger force is option D because: Crash 1: the force on the black hockey puck was stronger in this crash, so the force on the cone was also stronger.
Does it take a stronger force to slow something down?The ball is drawn back to Earth by gravitational force. The ball returns to Earth as a result of friction. The ball is forced back toward Earth by magnetic force.
A puck's velocity changes when a player makes contact with it when it is still. He causes the puck to speed up, in other terms. The hockey stick's force, which causes the acceleration, is responsible. The velocity grows as long as this force is in motion.
Therefore, the force applied to an object must be larger than what is required for a progressive slowing down if the object must be slowed down quickly. For instance, a bicycle's brakes will slow or stop it more quickly the more force is given to it.
Learn more about Force from
https://brainly.com/question/12785175
#SPJ1
See full question below
After hockey practice, Carissa and Keenan were playing a game where they were pushing some objects to get them to crash. They were using a cone and two different pucks—a black one with more mass for Crash 1 and a blue one with less mass for Crash 2. They want to know what happened to the cone.
Use the information from the diagram to answer.
In which crash did the cone experience a stronger force? How do you know?
answer choices
There was no force on the cone. In both crashes, only the hockey puck experienced a force.
The diagram doesn’t tell you anything about the force on the cone. It only gives information about the force on the pucks.
It was the same force in both crashes; the hockey puck changed speed by the same amount in each crash, so the force on the cone was the same each time.
Crash 1; the force on the black hockey puck was stronger in this crash, so the force on the cone was also stronger.
Draw the electron pair geometry for sulfur tetrafluoride, SF4, . What the name of the molecular shape of sulfur tetrafluoride
Answer: The hybridization that is involved in SF4 is sp3d type. Here will learn and understand how to determine SF4 hybridization. We will discuss the steps in detail.
Name of the Molecule Sulphur Tetrafluoride
Molecular Formula = SF4
Hybridization Type = sp3d
Bond Angle = 102o and 173o
Geometry = see-saw
Explanation:
In order to determine the hybridization of sulphur tetrafluoride, you have to first understand its Lewis structure and the number of valence electrons that are present. The SF4 molecule consists of a total of 34 valence electrons. Here 6 will come from sulphur and each of the four fluorine atoms will have 7 electrons.
During the formation of SF4, the sulphur atom will form bonds with each of the fluorine atoms where 8 valence electrons are used. Meanwhile, the four fluorine atoms will have 3 lone pairs of electrons in their octet which will further utilize 24 valence electrons. In addition, two electrons will be kept as lone pairs in the sulphur atom. Now we can determine sulphur’s hybridization by taking a count of the number of regions of electron density.
When bonding takes place there is a formation of 4 single bonds in sulphur and it has 1 lone pair. Looking at this, we can say that the number of regions of electron density is 5.
EXTERNAL LINKS :
https://www.chemtube3d.com/vseprshapesf4/
https://geometryofmolecules.com/sf4-lewis-structure-polarity/
based on their structures, rank phenol, benzene, benzaldehyde, and benzoic acid in terms of lowest to highest boiling point. explain your reasoning.
Increasing order of boiling point of the given molecules is
Benzene< Benzaldehyde<Phenol<Benzoic acid.
Boiling point is directly proportional to intermolecular forces.
The intermolecular forces present in the given molecules are.
so, as benzene is nonpolar , only weak london dispersion force is present. Hence boiling point of benzene is least among the given molecules. Benzaldehyde is polar, so dipole -dipole force is also present. But no H-bonding is present. Hence, boiling point of benzaldehyde is less than that of phenol and benzoic acid. Now, both phenol and benzoic acid is polar as well as they can form H-bonding. But phenol can only form intermolecular hydrogen bonding, but benzoic acid can form both intermolecular as well as intramolecular H bonding. So it can exist as dimer. The presence of dimer further strengthen the vander Waals dispersion forces , that increases the boiling point of Benzoic acid.
Hence increasing order of boiling point of the given molecules is
Benzene< Benzaldehyde<Phenol<Benzoic acid.
Learn more about boiling point here:
https://brainly.com/question/40140
#SPJ4
The rate of effusion of substance A is 3 times the rate of effusion of substance B. If the molar mass of substance A is 4.00 g/mol, what is the molar mass of substance B?
The rate of effusion of substance A is 3 times the rate of effusion of substance B, and molar mass of A is 4g/mol, then molar mass of B is 36g/mol.
Graham Law:
The rate of effusion of a gaseous substance is inversely proportional to the square root of its molar mass. This is called Graham's Law
R = k/√M
where k is constant and m is molar mass of the substance.
rate of effusion of substance A is 3 times the rate of effusion of substance B.
molar mass of substance A is 4.00g/mol
Ra = 3Rb
Ra/Rb = √Mb/√Ma
3Rb/Rb = √Mb/√4
3 = √Mb/2
√Mb = 6
Mb = 36
so, molar mass of substance B is 36g/mol.
learn more about rate of effusion:
https://brainly.com/question/8804761
#SPJ4
how are windbelts formed Please answer ASP its 30 points!!
Answer:due to unequal heating
Explanation:
How many moles of chlorine are present in 3 moles of MgCl2
The amount, in moles, of chlorine that would be present in 3 moles of [tex]MgCl_2[/tex] would be 6 moles.
Stoichiometric problem[tex]MgCl_2[/tex] is made from magnesium and chlorine molecules according to the following equation:
[tex]MgCl_2 --- > Mg^{2+} + 2Cl^-[/tex]
From the above equation, 1 mole of [tex]MgCl_2[/tex] is made up of 1 mole of Mg and 2 moles of Cl.
Following this established ratio, the amount of chlorine that would be present in 3 moles of [tex]MgCl_2[/tex] can be calculated as follows:
1 mole [tex]MgCl_2[/tex] = 2 moles of Cl
3 moles [tex]MgCl_2[/tex] = 2 x 3/1
= 6 moles of Cl
In other words, 6 moles of Cl would be present in 3 moles of [tex]MgCl_2[/tex].
More on stoichiometric calculations can be found here: https://brainly.com/question/27287858
#SPJ1
Draw the Lewis structure for XeF2 in the window below and then answer the questions that follow. с P opy aste []* С ChemDoodle Is XeF2 polar or nonpolar?
If XeF2 is polar or nonpolar based on the Lewis Structure and the molecular geometry (shape).
What is nonpolar?A nonpolar molecule has no separation of charge, so no positive or negative poles are formed. In other words, the electrical charges of nonpolar molecules are evenly distributed across the molecule. Nonpolar molecules tend to dissolve well in nonpolar solvents, which are frequently organic solvents.In a polar molecule, one side of the molecule has a positive electrical charge and the other side has a negative electrical charge. Polar molecules tend to dissolve well in water and other polar solvents.There are also amphiphilic molecules, large molecules that have both polar and nonpolar groups attached to them. Because these molecules have both polar and nonpolar character, they make good surfactants, aiding in mixing water with fats.To learn more about molecules refer to:
https://brainly.com/question/475709
#SPJ4
