Choose which triangle goes into the right category.

Answer:

1/6 < 2/11

Step-by-step explanation:

1/6 = 2/12

2/11 >2/12

So that means 1/6 < 2/11

Answer:  1/6 < 2/11

This is the same as saying 11/66 < 12/66

===========================================================

Explanation:

1/6 is the same as 11/66 when multiplying top and bottom by 11.

2/11 is the same as 12/66 when multiplying top and bottom by 6.

The 6 and 11 multipliers are from the original denominators (just swapped).

We can see that 11/66 is smaller than 12/66, simply because 11 < 12, so that means 1/6 is smaller than 2/11

-----------------

Here's one way you could list out the steps

11 < 12

11/66 < 12/66

1/6 < 2/11

------------------

Here's another way to list out the steps. First assume that 1/6 and 2/11 are equal. Cross multiplication then leads to

1/6 = 2/11

1*11 = 6*2

11 = 12

Which is false. But we can fix this by replacing every equal sign with a less than sign

1/6 < 2/11

1*11 < 6*2

11 < 12

---------------------

Yet another way to see which is smaller is to use your calculator or long division to find the decimal form of each value

1/6 = 0.1667 approximately

2/11 = 0.1818 approximately

We see that 0.1667 is smaller than 0.1818, which must mean 1/6 is smaller than 2/11.

Answer:

3.15 seconds is the answer.

Explanation

when the ball touches the ground, h =0

hence,

0=255-21t-16t²

16t²+21t-225=0

here a=16 ,b=21, c= -225

[tex]t= \frac{ - b± \sqrt{ {b }^{2} - 4ac} }{2a} \\ \\ t= \frac{ - 21± \sqrt{ {21}^{2} - 4 \times 16 \times - 225} }{2 \times 16} \\ = \frac{ - 21 ± \sqrt{441 - ( - 14400)} }{32} \\ = \frac{ - 21± \sqrt{14841} }{32} \\ = \frac{ - 21±121.82}{32} \\ \\ t = \frac{ - 21 + 121.82}{32} \: or \: \: t = \frac{ - 21 - 121.82}{32} \\ t = 3.15 \: \: or \: \: t = - 4.46[/tex]

time cannot be negative, hence t = -4.46 can be avoided

The ball takes 3.15 seconds to hit the ground.

Answer:

the correct answer is 3

hope it helps

have a nice day

Answer:

The motion of the particle describes an ellipse.

Step-by-step explanation:

The characteristics of the motion of the particle is derived by eliminating [tex]t[/tex] in the parametric expressions. Since both expressions are based on trigonometric functions, we proceed to use the following trigonometric identity:

[tex]\cos^{2} t + \sin^{2} t = 1[/tex] (1)

Where:

[tex]\cos t = \frac{y-3}{2}[/tex] (2)

[tex]\sin t = x - 1[/tex] (3)

By (2) and (3) in (1):

[tex]\left(\frac{y-3}{2} \right)^{2} + (x-1)^{2} = 1[/tex]

[tex]\frac{(x-1)^{2}}{1}+\frac{(y-3)^{2}}{4} = 1[/tex] (4)

The motion of the particle describes an ellipse.

The power consumed in the lamp marked 100W - 110V is 15.68W

The power consumed in the lamp marked 100W - 220V is 62.73W

Given:

First lamp rating

Power (P) = 100W

Voltage (V) = 110V

Second lamp rating

Power (P) = 100W

Voltage (V) = 220V

Source

Voltage = 220V

i. Get the resistance of each lamp.

Remember that power (P) of each of the lamps is given by the quotient of the square of their voltage ratings (V) and their resistances (R). i.e

P = [tex]\frac{V^2}{R}[/tex]

Make R subject of the formula

⇒ R = [tex]\frac{V^2}{P}[/tex]             ------------------(i)

For first lamp, let the resistance be R₁. Now substitute R = R₁, V = 110V and P = 100W into equation (i)

R₁ = [tex]\frac{110^2}{100}[/tex]

R₁ = 121Ω

For second lamp, let the resistance be R₂. Now substitute R = R₂, V = 220V and P = 100W into equation (i)

R₂ = [tex]\frac{220^2}{100}[/tex]

R₂ = 484Ω

ii. Get the equivalent resistance of the resistances of the lamps.

Since the lamps are connected in series, their equivalent resistance (R) is the sum of their individual resistances. i.e

R = R₁ + R₂

R  = 121 + 484

R = 605Ω

iii. Get the current flowing through each of the lamps.

Since the lamps are connected in series, then the same current flows through them. This current (I) is produced by the source voltage (V = 220V) of the line and their equivalent resistance (R = 605Ω). i.e

V = IR [From Ohm's law]

I = [tex]\frac{V}{R}[/tex]

I = [tex]\frac{220}{605}[/tex]

I = 0.36A

iv. Get the power consumed by each lamp.

From Ohm's law, the power consumed is given by;

P = I²R

Where;

I = current flowing through the lamp

R = resistance of the lamp.

For the first lamp, power consumed is given by;

P = I²R           [Where I = 0.36 and R = 121Ω]

P = (0.36)² x 121

P = 15.68W

For the second lamp, power consumed is given by;

P = I²R           [Where I = 0.36 and R = 484Ω]

P = (0.36)² x 484

P = 62.73W

Therefore;

The power consumed in the lamp marked 100W - 110V is 15.68W

The power consumed in the lamp marked 100W - 220V is 62.73W

Answer:

The first mechanic charged $ 85 an hour, and the second mechanic charged $ 55 an hour.

Step-by-step explanation:

Given that two mechanics worked on a car, and the first mechanic worked for 10 hours, and the second mechanic worked for 5 hours, and together they charged a total of $ 1125, to determine what was the rate charged per hour by each mechanic if the sum of the two rates was $ 140 per hour, the following calculation must be performed:

1125/15 = X

75 = X

80 x 10 + 60 x 5 = 800 + 300 = 1100

85 x 10 + 55 x 5 = 850 + 275 = 1125

Therefore, the first mechanic charged $ 85 an hour, and the second mechanic charged $ 55 an hour.

Answer:

0.5759

Step-by-step explanation:

Answer:

the car travels 10km then 15km 60* north of east

Step-by-step explanation:

Answer:

a. $10  

b. 10.46  

c. 10.46  

d. 0.096

Step-by-step explanation:

Let us take a nominal square of area 25 cm².

So, in this question, we can say that:-

a. The length of one of its sides will be less than 5 cm.

b. Its perimeter will be less than 20 cm.

Hope it helps :)

Step-by-step explanation:

area= 25cm squared

length of one side = 5cm as 5*5 =25

perimeter= 5*4= 20cm

But since the area is less than 25cm squared

we can say that the length of one side is less than 5cm and we can also say that the length of the perimeter is less than 20cm.

Hope this helps.

Answer:

The 98% confidence interval for the mean amount spent on their child's last birthday gift is between $40.98 and $43.02.

Step-by-step explanation:

We have the standard deviation for the sample, which means that the t-distribution is used to solve this question.

The first step to solve this problem is finding how many degrees of freedom, we have. This is the sample size subtracted by 1. So

df = 24 - 1 = 23

98% confidence interval

Now, we have to find a value of T, which is found looking at the t table, with 23 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.98}{2} = 0.99[/tex]. So we have T = 2.5

The margin of error is:

[tex]M = T\frac{s}{\sqrt{n}} = 2.5\frac{2}{\sqrt{24}} = 1.02[/tex]

In which s is the standard deviation of the sample and n is the size of the sample.

The lower end of the interval is the sample mean subtracted by M. So it is 42 - 1.02 = $40.98.

The upper end of the interval is the sample mean added to M. So it is 42 + 1.02 = $43.02.

The 98% confidence interval for the mean amount spent on their child's last birthday gift is between $40.98 and $43.02.

Answer:

6.09 is the answer rounded to nearest hundredths.

Step-by-step explanation:

It gives you n=150, p=0.55, and q=1-p.

If p=0.55 and q=1-p, then by substitution property we have q=1-0.55=0.45.

It ask you to evaluate the expression sqrt(npq).

So npq means find the product of 150 and 0.55 and 0.45. So that is 150(0.55)(0.45)=37.125.

The sqrt(npq) means we need to find the square root of that product. So sqrt(37.125)=6.093 approximately .

Answer:

x = ±i√2

General Formulas and Concepts:

Pre-Algebra

Order of Operations: BPEMDAS

Equality Properties

Multiplication Property of Equality

Division Property of Equality

Addition Property of Equality

Subtraction Property of Equality

Algebra II

Imaginary root i

Step-by-step explanation:

Step 1: Define

Identify

5x² - 2 = -12

Step 2: Solve for x

9514 1404 393

Answer:

  p > 3

Step-by-step explanation:

  3p -4 -8p < -19 . . . . . . given

  -5p -4 < - 19 . . . . . . . . collect terms

  -5p < -15 . . . . . . . . . . . add 4

  p > 3 . . . . . . . . . . . . . . divide by -5 (reverses the inequality symbol)

12.8, pythagorean theorem.

Answer:

= x^2 + 3 + √3x^2 - 1

Step-by-step explanation:

Remove parentheses: (a) = a

= x^2 + 3 + √x . 3x - 1

x . 3x = 3x^2

= x^2 + 3 + √3x^2 - 1

Answer: 75%

Step-by-step explanation:

Answer:

what is the question

pls mark me as brainlist

Thank you for the points

Answer:

In general gf(x) is not equal to fg(x)

Some pairs of functions cannot be composed. Some pairs of functions can be composed only  for certain values of x.

Only with they can be composed some values of x are the ranges of g(x) and f(x) are the same, and their domains are also the same. Or else lies inside it.

Step-by-step explanation:

g(x) = 3x + 6 - 8, f(x) = √x.

The domain of a composed function is either the same as the domain of the first function, or  else lies inside it

The range of a composed function is either the same as the range of the second function, or else lies inside it.

Or vice versa

Now only positive numbers, or zero, have real square roots. So g is defined only for numbers

greater than or equal to zero. Therefore g(f(x)) can have a value only if f(x) is greater than or

equal to zero. You can work out that

f(x) ≥ 0 only when x ≥3/2

.

Answer:

The zeroes of f(x) = (x-7)(x+8) are 7 and -8.

Step-by-step explanation:

You have to figure out what makes each of the equal to zero.

Step 1 : Make the 2 equations both equal 0.

x-7 = 0

x+8 = 0

Step 2: Solve for x

x-7 = 0

x=7

x+8 = 0

x=-8

So 7 and -8 are both zeroes of this function.

Answer:

x P(x)

0 0.4167

1 0.5

2 0.0833

3 0

Step-by-step explanation:

The speedometers are chosen without replacement, which means that the hypergeometric distribution is used to solve this question.

Hypergeometric distribution:

The probability of x successes is given by the following formula:

[tex]P(X = x) = h(x,N,n,k) = \frac{C_{k,x}*C_{N-k,n-x}}{C_{N,n}}[/tex]

In which:

x is the number of successes.

N is the size of the population.

n is the size of the sample.

k is the total number of desired outcomes.

In this question:

7 + 2 = 9 speedometers, which means that [tex]N = 9[/tex]

2 are not correctly calibrated, which means that [tex]k = 2[/tex]

3 are chosen, which means that [tex]n = 3[/tex]

Complete the probability distribution table.

Probability of each outcome.

So

[tex]P(X = x) = h(x,N,n,k) = \frac{C_{k,x}*C_{N-k,n-x}}{C_{N,n}}[/tex]

[tex]P(X = 0) = h(0,9,3,2) = \frac{C_{2,0}*C_{7,3}}{C_{9,3}} = 0.4167[/tex]

[tex]P(X = 1) = h(1,9,3,2) = \frac{C_{2,1}*C_{7,2}}{C_{9,3}} = 0.5[/tex]

[tex]P(X = 2) = h(2,9,3,2) = \frac{C_{2,2}*C_{7,1}}{C_{9,3}} = 0.0833[/tex]

Only 2 defective, so [tex]P(X = 3) = 0[/tex]

Probability distribution table:

x P(x)

0 0.4167

1 0.5

2 0.0833

3 0

Answer:

Step-by-step explanation:

a) 52 is divisible by 4 and 5 - 2 = 3

b) 63 is divisible by 9 and 3*2 = 6 -> ten digit

c) 50 is divisible by 10 and 5 + 0 = 5

d) 72 is divisible by 6 and 7*2 = 14

( solution at pic)

Answer:

D. It will increase by 1%.

Step-by-step explanation:

Given

[tex]u_1 = 5\%[/tex] --- initial rate

[tex]u_2 = 3\%[/tex] --- final rate

Required

The effect on the GDP

To calculate this, we make use of:

[tex]\frac{\triangle Y}{Y} = u_1 - 2\triangle u[/tex]

This gives:

[tex]\frac{\triangle Y}{Y} = 5\% - 2(5\% - 3\%)[/tex]

[tex]\frac{\triangle Y}{Y} = 5\% - 2(2\%)[/tex]

[tex]\frac{\triangle Y}{Y} = 5\% - 4\%[/tex]

[tex]\frac{\triangle Y}{Y} = 1\%[/tex]

This implies that the GDP will increase by 1%

Answer: A. It will increase by 7%.

Step-by-step explanation: I took this course!

The answer is D

Hope that was fast enough

Answer:

Step-by-step explanation:

this is the famous dirt formula,  :P  I made it up   :D

D=rt    ( notice it looks like   Dirt  , kinda,  but it also means it dirt simple )

D= distance

r = rate  ( think speed or how fast)

t = time  ( in what ever units of time you want to use, seconds, minutes, hours )

13:28 - 11:20 = 128 minutes ( b/c the question is asking in MPH convert to hours)   2.4666667 hours

210 miles =  r * 2.46666667

210 / 2.46666667 = r   ( in MPH) ( does anyone else find it odd that they are saying miles in London instead of kilometers? :/ )

85.135 MPH = rate

so no, not even close to 104 MPH  :/  

Answer:

Average speed is 98 mph

Step-by-step explanation:

[tex]\frac{distance (miles)}{time (hours)}[/tex] = speed [tex]\frac{mile}{hours}[/tex]  (miles per hour is a ratio)

The time is 2 hours and 8 minutes.

[tex]\frac{8}{60}[/tex] = .13333 ( 8 minutes / 60 minutes in a hour)

So time is 2.133333 hours .

Divide the distance 210 by the time 2.13333 and get the speed.

Its 98.437..

Round to 98 miles per hour.

Answer:

y= (-6/5)x+3

Step-by-step explanation:

6x+5y=15

Divide everything by 5

(6/5)x + y = 3

Move (6/5)x to the other side of the = sign by subtracting

y= (-6/5)x + 3

That's your answer!

Hope it helps!